SAP ABAP Message Class AH (IS-U billing (master data))
Basic Data
Hierarchy
☛
IS-UT (Software Component) SAP Utilities/Telecommunication
⤷
IS-U-BI (Application Component) Contract Billing
⤷
EE20 (Package) IS-U: Billing
IS-UT (Software Component) SAP Utilities/Telecommunication⤷
IS-U-BI (Application Component) Contract Billing⤷
EE20 (Package) IS-U: Billing 
Attributes
| Message class |  |
AH |
| Short Description |  |
IS-U billing (master data) |
| Changed On |  |
20110810 |
| Last Changed At |  |
143619 |
Messages
| # | Message | Message Short Text | Documentation status | Authorization check |
|---|---|---|---|---|
| 1 |  001 |
Enter 0 for first block for & | Space: object requires documentation | |
| 2 | 002 |
Enter 9,999,999,999 for last block for & | Space: object requires documentation | |
| 3 | 003 |
Gap in blocks for & (adjust blocks) | Space: object requires documentation | |
| 4 | 004 |
Overlap in blocks for & (adjust blocks) | Space: object requires documentation | |
| 5 | 005 |
All blocks are consistent | ||
| 6 | 006 |
Rate category &1 does not exist | ||
| 7 | 007 |
Operand &1 is still used | Space: object requires documentation | |
| 8 | 008 |
Dependent entries in table &1 &2 &3 &4 | ||
| 9 | 009 |
Enter &1 &2 &3 &4 | Space: object requires documentation | |
| 10 | 010 |
Fact &1 &2 &3 &4 does not exist | ||
| 11 | 011 |
Rate fact &1 &2 &3 does not exist | ||
| 12 | 012 |
Temperature value not in positive range | Space: object requires documentation | |
| 13 | 013 |
Air pressure not between &1 and &2 | Space: object requires documentation | |
| 14 | 014 |
Enter unit of measurement | Space: object requires documentation | |
| 15 | 015 |
Quantity issued is zero | Space: object requires documentation | |
| 16 | 016 |
Units of measurement within calorific value district &1 do not match | Space: object requires documentation | |
| 17 | 017 |
Units of measurement match for each calorific value district | Space: object requires documentation | |
| 18 | 018 |
Check cannot be performed (enter an object) | Space: object requires documentation | |
| 19 | 019 |
To-measured pressure &1 is less than from-measured pressure &2 | Space: object requires documentation | |
| 20 | 020 |
Volume correction factor is zero | Space: object requires documentation | |
| 21 | 021 |
From-measured pressure is zero | Space: object requires documentation | |
| 22 | 022 |
All specified measured blocks are consistent | Space: object requires documentation | |
| 23 | 023 |
BClss &1 air press. area &2 temp.area &3 valid from &4: block start not 0 | Space: object requires documentation | |
| 24 | 024 |
BClass &1 air pr.area &2 temp.area &3 val.from &4: block end not 999.9999 | Space: object requires documentation | |
| 25 | 025 |
Bill. class &1 air pressure area &2 temp. area &3 valid from &4: gap | Space: object requires documentation | |
| 26 | 026 |
Bill. class &1 air pressure area &2 temp. area &3 valid from &4: overlap | Space: object requires documentation | |
| 27 | 027 |
Consistency check for meas. pressure blocks - use only for complete list | Space: object requires documentation | |
| 28 | 028 |
&1 is zero | Space: object requires documentation | |
| 29 | 029 |
&1 is not between &2 and &3 | Space: object requires documentation | |
| 30 | 030 |
Measured pressure &1 is greater than maximum value &2 | Space: object requires documentation | |
| 31 | 031 |
Choose a default value for billing class &1 | Space: object requires documentation | |
| 32 | 032 |
Several default values chosen for billing class &1 | Space: object requires documentation | |
| 33 | 033 |
There is exactly one default value per billing class | Space: object requires documentation | |
| 34 | 034 |
Gas law deviation factor &1 is not between &2 and &3 | Space: object requires documentation | |
| 35 | 035 |
Gas temperature &1 is rounded to exactly 0.5 | ||
| 36 | 036 |
Billing class &1: block start is not 0 | Space: object requires documentation | |
| 37 | 037 |
Billing class &1: block end is not &2 | Space: object requires documentation | |
| 38 | 038 |
Gap in billing class &1 | Space: object requires documentation | |
| 39 | 039 |
Overlap in billing class &1 | Space: object requires documentation | |
| 40 | 040 |
Specify a pressure level | Space: object requires documentation | |
| 41 | 041 |
Only values &1 &2 &3 &4 permitted | ||
| 42 | 042 |
Deviation &1 is greater than &2 | Space: object requires documentation | |
| 43 | 043 |
Default &1 is greater than permitted deviation &2 | ||
| 44 | 044 |
Enter the date | Space: object requires documentation | |
| 45 | 045 |
Valid for all billing procedures, if no specific value | ||
| 46 | 046 |
Billing transaction &1 not permitted | ||
| 47 | 047 |
No text was entered | Space: object requires documentation | |
| 48 | 048 |
Measured pressure &1 not in table &2 | Space: object requires documentation | |
| 49 | 049 |
Gas procedure &1 is still used (see where-used list) | Space: object requires documentation | |
| 50 | 050 |
Only 01, 02 or 03 permitted as gas billing types | ||
| 51 | 051 |
Enter a valid volume correction factor procedure | Space: object requires documentation | |
| 52 | 052 |
Enter a to-date that is after the last entry | Space: object requires documentation | |
| 53 | 053 |
Enter a valid calorific value procedure | Space: object requires documentation | |
| 54 | 054 |
Enter a to-date that is after the from-date | Space: object requires documentation | |
| 55 | 055 |
Calorific value procedure &1 is still used (see where-used list) | Space: object requires documentation | |
| 56 | 056 |
Enter rate type, rate category and rate | Space: object requires documentation | |
| 57 | 057 |
Error occurred during transfer of facts for installation &1 | Space: object requires documentation | |
| 58 | 058 |
Rate &1 does not contain any rate steps | Space: object requires documentation | |
| 59 | 059 |
Not possible to transfer facts for operand category &v1& | Space: object requires documentation | |
| 60 | 060 |
Not permissible to set the "No prorat." indicator | Space: object requires documentation | |
| 61 | 061 |
Select weighting/cal. value district only if you choose averaging type 02 | Space: object requires documentation | |
| 62 | 062 |
Division &1: division category from table &2 cannot be determined | ||
| 63 | 063 |
Enter a billing class | Space: object requires documentation | |
| 64 | 064 |
Div. cat. &1 of div. &2 does not match div. cat. &3 of price class &4 | Space: object requires documentation | |
| 65 | 065 |
Enter a valid combination of control indicators | Space: object requires documentation | |
| 66 | 066 |
Calorific value procedure &1 not in table &2 | ||
| 67 | 067 |
Position cursor on the line you wish to delete | Space: object requires documentation | |
| 68 | 068 |
Volume correction factor procedure &1 not in table &2 | ||
| 69 | 069 |
Price unit of measurement &1 and billing unit of meas. &2 do not match | Space: object requires documentation | |
| 70 | 070 |
Volume correction factor procedure &1 is still used (see where-used list) | Space: object requires documentation | |
| 71 | 071 |
Enter from-date | Space: object requires documentation | |
| 72 | 072 |
Delete all values before you specify a replacement value | Space: object requires documentation | |
| 73 | 073 |
Measured pressure &1 is larger than permitted maximum value &2 | Space: object requires documentation | |
| 74 | 074 |
From-nominal load &1 greater than to-nominal load &2 | ||
| 75 | 075 |
No entries for billing class &1 in table &2 | Space: object requires documentation | |
| 76 | 076 |
Gas procedure &1 not in table &2 | ||
| 77 | 077 |
Please also maintain gas law deviation factor after correcting GLD factor | ||
| 78 | 078 |
Only enter air pressure (corr.) if thermal gas billing = 00 or 01 | Space: object requires documentation | |
| 79 | 079 |
Only enter averaging type/avg from/fixed temp.if thermal gas billing = 00 | Space: object requires documentation | |
| 80 | 080 |
Enter either fixed temperature or averaging type/average from | Space: object requires documentation | |
| 81 | 081 |
Enter both "averaging type" and "average from" | Space: object requires documentation | |
| 82 | 082 |
Enter all rounding attributes | Space: object requires documentation | |
| 83 | 083 |
Normal air pressure &1 deviates from standard value &2 | ||
| 84 | 084 |
Specify the conversion factor for dimension conversion | Space: object requires documentation | |
| 85 | 085 |
No gas law deviation factor correction is possible for factor 01 | ||
| 86 | 086 |
You have already specified a replacement value for the operand | Space: object requires documentation | |
| 87 | 087 |
Values already exist for operand &1 (season &2) | Space: object requires documentation | |
| 88 | 088 |
Specify an operand | Space: object requires documentation | |
| 89 | 089 |
Operand &1 is not of category &2 | ||
| 90 | 090 |
Rate type &1 already exists | Space: object requires documentation | |
| 91 | 091 |
Only choose usage type if "fixed volume correction factor" is used | Space: object requires documentation | |
| 92 | 092 |
General control indicators are partially ignored in special procedure | Space: object requires documentation | |
| 93 | 093 |
Gas law deviation factor 01 only possible for temp./pressure billing | Space: object requires documentation | |
| 94 | 094 |
Maintain temperature component | Space: object requires documentation | |
| 95 | 095 |
Special proc. "no temperature" only necessary for thermal gas billing 00 | Space: object requires documentation | |
| 96 | 096 |
Specify either number of outsortings or permanent outsorting | Space: object requires documentation | |
| 97 | 097 |
Only maintain rounding rules when using 'conversion factor' | Space: object requires documentation | |
| 98 | 098 |
Changes to facts were made | ||
| 99 | 099 |
Maintain an operand value for operand &1 | Space: object requires documentation | |
| 100 | 100 |
Installation &1 was already billed on &2 | Space: object requires documentation | |
| 101 | 101 |
Value of command &1 (ARCR &2) greater than first value ( &3 ) | ||
| 102 | 102 |
Value of command &1 (ARCR &2) greater than value in operation mode & (&) | ||
| 103 | 103 |
Reference value can only be limited (on &) | ||
| 104 | 104 |
Reference value was deleted | ||
| 105 | 105 |
Reference value was limited | ||
| 106 | 106 |
Cal. val. proc. &1 cal. val. district &2: no billing cal. value exists | ||
| 107 | 107 |
Should later time slices be maintained first? | ||
| 108 | 108 |
Calorific value district &1 not in table &2 | ||
| 109 | 109 |
Entry/entries maintained | ||
| 110 | 110 |
Maintain entry | Space: object requires documentation | |
| 111 | 111 |
Calorific values to be billed are outside of normal limits | Space: object requires documentation | |
| 112 | 112 |
No entry exists for date &1 | ||
| 113 | 113 |
Franchise fee price is only possible for quantity-based price operands | Space: object requires documentation | |
| 114 | 114 |
Calorific value &1 is not between &2 and &3 | Space: object requires documentation | |
| 115 | 115 |
No calorific value in table &1 for period &2 | Space: object requires documentation | |
| 116 | 116 |
Supplier calorific value date &1 in table &2 is zero | Space: object requires documentation | |
| 117 | 117 |
Company calorific value date &1 in table &2 is zero | Space: object requires documentation | |
| 118 | 118 |
Changes were made to operand &1 | ||
| 119 | 119 |
No register use possible in reference base &1 | ||
| 120 | 120 |
Price &1, price category &2, pricing level &3 does not exist | ||
| 121 | 121 |
Franch. fee prices w. start value can only be maintained in inst. facts | Space: object requires documentation | |
| 122 | 122 |
Enter only one value for date &1 | Space: object requires documentation | |
| 123 | 123 |
Enter only one value for the period &1 to &2 | Space: object requires documentation | |
| 124 | 124 |
Do not use price type "blocks/scales" in price category 3 | Space: object requires documentation | |
| 125 | 125 |
Specify a price level for price category 3 only | Space: object requires documentation | |
| 126 | 126 |
Do not use price adjustment clauses for average price | Space: object requires documentation | |
| 127 | 127 |
Specify a from-zone (otherwise no other entry is possible) | Space: object requires documentation | |
| 128 | 128 |
Block maintenance for date &1 canceled | ||
| 129 | 129 |
Block maintenance for date &1 ended | ||
| 130 | 130 |
Entry/entries with 'valid from' &1 already exist | ||
| 131 | 131 |
No entry exists for date &1 from block &2 | ||
| 132 | 132 |
Internal: to-date in same from-date group inconsistent | Space: object requires documentation | |
| 133 | 133 |
Indicator 'ignore consumption' for date &1 not transferred | ||
| 134 | 134 |
No facts available | ||
| 135 | 135 |
Enter a variant program | Space: object requires documentation | |
| 136 | 136 |
Internal: to-date of the most current record is missing | Space: object requires documentation | |
| 137 | 137 |
Internal: to-date <> from-date of previous record - 1 day | Space: object requires documentation | |
| 138 | 138 |
To-block of the current record must be &1 (block maintenance) | Space: object requires documentation | |
| 139 | 139 |
To-block &1 <> from-block &2 of previous record | Space: object requires documentation | |
| 140 | 140 |
You are not permitted to maintain operands of category &1 in the &2 | Space: object requires documentation | |
| 141 | 141 |
You are not permitted to specify a season for operands of category &1 | Space: object requires documentation | |
| 142 | 142 |
Price is consistent | Space: object requires documentation | |
| 143 | 143 |
Smallest from-block &1 is not zero | Space: object requires documentation | |
| 144 | 144 |
Specify a rate category | Space: object requires documentation | |
| 145 | 145 |
Reference for price category and pricing level &1 &2 &3 not available | ||
| 146 | 146 |
Price type &1 must agree with price type &2 of the reference | ||
| 147 | 147 |
Price category &1 must agree with price category &2 of the reference | ||
| 148 | 148 |
Pricing level &1 must agree with pricing level &2 of the reference | ||
| 149 | 149 |
Enter a price | Space: object requires documentation | |
| 150 | 150 |
Enter a price category | Space: object requires documentation | |
| 151 | 151 |
Select "With price history" only when selecting a reference | Space: object requires documentation | |
| 152 | 152 |
Enter a price type | Space: object requires documentation | |
| 153 | 153 |
Enter a price reference | Space: object requires documentation | |
| 154 | 154 |
Enter a reference for price category | Space: object requires documentation | |
| 155 | 155 |
Enter a rate type | Space: object requires documentation | |
| 156 | 156 |
Price category/level &1 &2 &3 is still used -> where-used list | ||
| 157 | 157 |
Price/category &1 &2 is still used -> where-used list | ||
| 158 | 158 |
Internal error in determining possible entries (&1, &2) | Space: object requires documentation | |
| 159 | 159 |
No matching price references found | ||
| 160 | 160 |
Not a valid line selection | ||
| 161 | 161 |
Enter a to-date that is after the from-date | Space: object requires documentation | |
| 162 | 162 |
Error in user exit &1 | Space: object requires documentation | |
| 163 | 163 |
Historical data will be lost | ||
| 164 | 164 |
Enter an operand from category &1 | Space: object requires documentation | |
| 165 | 165 |
Select the operand you wish to copy | Space: object requires documentation | |
| 166 | 166 |
Enter a time basis smaller than or equal to &1 | Space: object requires documentation | |
| 167 | 167 |
Complete your entry | Space: object requires documentation | |
| 168 | 168 |
Parameter &1 not specified | ||
| 169 | 169 |
Invalid value &1 for parameter &2 | ||
| 170 | 170 |
Possible entries for pricing level only possible for valid price category | ||
| 171 | 171 |
Select only "Without proration" or "Average price" | Space: object requires documentation | |
| 172 | 172 |
Price &1 is still used -> where-used list | ||
| 173 | 173 |
Possible entries for price only possible for valid price category | ||
| 174 | 174 |
Possible entries for price only possible with valid pricing level | ||
| 175 | 175 |
Possible entries (F4 help) for price only possible for price category 3 | ||
| 176 | 176 |
No matching prices (price classes) found in table V_TE431 | ||
| 177 | 177 |
Price &1 does not exist as price class in TE431 | ||
| 178 | 178 |
Price level &1 not in table TE471 | ||
| 179 | 179 |
Billing document not found for contract &1 and simulation indicator &2 | ||
| 180 | 180 |
Billing document not found for division &1 | ||
| 181 | 181 |
Bill document not found for portion &1 and company code &2 | ||
| 182 | 182 |
No bill documents found after &1 | ||
| 183 | 183 |
No entry found for object &2 in table &1 | ||
| 184 | 184 |
From-nominal load is zero | Space: object requires documentation | |
| 185 | 185 |
To-nominal load is zero | Space: object requires documentation | |
| 186 | 186 |
From-measured pressure is zero | Space: object requires documentation | |
| 187 | 187 |
To-measured pressure is zero | Space: object requires documentation | |
| 188 | 188 |
Fixed temperature &1 not in table &2 | ||
| 189 | 189 |
Billing class &1 not in table &2 | ||
| 190 | 190 |
Internal: error occurred during import of meter reading results to &1 | Space: object requires documentation | |
| 191 | 191 |
EquiNo. &1 Reg. &2 (logic reg. &3): at least two MR results required | ||
| 192 | 192 |
No (periodic) meter readings found for scheduled billing date &1 | Space: object requires documentation | |
| 193 | 193 |
Log. reg. &1 period &2-&3: no MR result relevant to start of bill. period | Space: object requires documentation | |
| 194 | 194 |
Log. reg. &1 period &2-&3: no MR result relevant to end of billing period | Space: object requires documentation | |
| 195 | 195 |
Logical reg. &1 equip. no. &2 register &3 date &4: no MR results exist | Space: object requires documentation | |
| 196 | 196 |
Rage fact group &1 for rate &2 already exists | ||
| 197 | 197 |
Table &3 for meter reading document number &2 inconsistent | ||
| 198 | 198 |
Enter a unit | Space: object requires documentation | |
| 199 | 199 |
Enter number of days or months | Space: object requires documentation | |
| 200 | 200 |
Enter a percentage rate | Space: object requires documentation | |
| 201 | 201 |
Enter a price | Space: object requires documentation | |
| 202 | 202 |
Enter a quantity | Space: object requires documentation | |
| 203 | 203 |
Do not enter more than &1 input operands | Space: object requires documentation | |
| 204 | 204 |
Do not enter more than &1 output operands | Space: object requires documentation | |
| 205 | 205 |
Enter the control, consecutive number, and only the first text | Space: object requires documentation | |
| 206 | 206 |
Enter a value in every field | Space: object requires documentation | |
| 207 | 207 |
Internal: error accessing table &1 | Space: object requires documentation | |
| 208 | 208 |
Make at least two entries for radio button controls | Space: object requires documentation | |
| 209 | 209 |
Use consecutive numbering starting with 1 | Space: object requires documentation | |
| 210 | 210 |
Make only one entry for consecutive number 0 | Space: object requires documentation | |
| 211 | 211 |
No inconsistencies found in rate check | Space: object requires documentation | |
| 212 | 212 |
Operand &1 is of category &2 instead of &3 | ||
| 213 | 213 |
Enter a variant program first | Space: object requires documentation | |
| 214 | 214 |
Variant programm &1 is not available | Space: object requires documentation | |
| 215 | 215 |
Meter reading document number &1 not found in table &2 | ||
| 216 | 216 |
Operand &1 has division &2 instead of &3 | ||
| 217 | 217 |
Enter a valid discount for the period | Space: object requires documentation | |
| 218 | 218 |
Enter a valid price for the period | Space: object requires documentation | |
| 219 | 219 |
Position cursor on an operand | Space: object requires documentation | |
| 220 | 220 |
Do not create overlapping time slices | Space: object requires documentation | |
| 221 | 221 |
Variant &1 has &2 control parameters | ||
| 222 | 222 |
Control parameter &1 of variant &2 is invalid | Space: object requires documentation | |
| 223 | 223 |
Select one line only | Space: object requires documentation | |
| 224 | 224 |
Enter a valid division | Space: object requires documentation | |
| 225 | 225 |
Enter a from-date from &1 | Space: object requires documentation | |
| 226 | 226 |
Enter a to-date from &1 | Space: object requires documentation | |
| 227 | 227 |
Enter an operand from the DEMAND or QUANT category | Space: object requires documentation | |
| 228 | 228 |
Register-related data in the rate header is incomplete | Space: object requires documentation | |
| 229 | 229 |
Create operand values for operand &1 | Space: object requires documentation | |
| 230 | 230 |
All facts are consistent | ||
| 231 | 231 |
Register operand &1 does not have a weighting key | ||
| 232 | 232 |
Internal: error accessing table &1 in form &2 | Space: object requires documentation | |
| 233 | 233 |
Register operand &1 is not used in a step | Space: object requires documentation | |
| 234 | 234 |
Maintain operand values for operand &1 | Space: object requires documentation | |
| 235 | 235 |
No sub-transactions are required for variant &1 | ||
| 236 | 236 |
Specify sub-transactions for variant &1 | Space: object requires documentation | |
| 237 | 237 |
Before saving ensure that rate category facts are consistent | Space: object requires documentation | |
| 238 | 238 |
Do not specify more than &1 line item types | Space: object requires documentation | |
| 239 | 239 |
No entry is required here | Space: object requires documentation | |
| 240 | 240 |
Document line type &1 cannot be used in rate | ||
| 241 | 241 |
Previous document number &1: scheduled meter reading date is missing | Space: object requires documentation | |
| 242 | 242 |
Internal: contract &1 sched. billing date &2: sched. MR date is missing | Space: object requires documentation | |
| 243 | 243 |
Internal: contract &1 sched. billing date &2: too many docs in table &3 | Space: object requires documentation | |
| 244 | 244 |
Rate &1 has an unsuitable division | ||
| 245 | 245 |
Rate &1 has an unsuitable billing class | ||
| 246 | 246 |
Rate &1 has no rate steps | ||
| 247 | 247 |
Variant &1 is still in use - see 'where-used list' | Space: object requires documentation | |
| 248 | 248 |
Enter a new rate step | Space: object requires documentation | |
| 249 | 249 |
Select the appropriate lines to be moved | Space: object requires documentation | |
| 250 | 250 |
User &1 is blocking rate &2 from schema &3 | Space: object requires documentation | |
| 251 | 251 |
Input parameter for function module &1 is incomplete | Space: object requires documentation | |
| 252 | 252 |
Currency required for absolute amount discounts and price discounts | Space: object requires documentation | |
| 253 | 253 |
Select at least one line | Space: object requires documentation | |
| 254 | 254 |
Schema steps for rate &1 were deleted | ||
| 255 | 255 |
Enter a rate category from division &1 as the reference | Space: object requires documentation | |
| 256 | 256 |
Enter a positive value | Space: object requires documentation | |
| 257 | 257 |
Database predecimal places > MAXIMUM (number of predecimal places) | Space: object requires documentation | |
| 258 | 258 |
Database decimal places > MAXIMUM (number of decimal places) | Space: object requires documentation | |
| 259 | 259 |
Selected lines were transferred to file | ||
| 260 | 260 |
Contents of file were inserted | ||
| 261 | 261 |
Selected lines were moved | ||
| 262 | 262 |
Selected lines deleted | ||
| 263 | 263 |
Schema was released for billing | ||
| 264 | 264 |
No inconsistencies found | ||
| 265 | 265 |
Rate &1 was inserted | ||
| 266 | 266 |
Internal: field &1 from the contract is not filled | Space: object requires documentation | |
| 267 | 267 |
Field &1 from the billing order is not filled | Space: object requires documentation | |
| 268 | 268 |
Entry has been made in field &1 | Space: object requires documentation | |
| 269 | 269 |
Price &1 price category &2 pricing level &3 language &4: text missing | ||
| 270 | 270 |
Internal: error has occurred reading partner for contract &1 | Space: object requires documentation | |
| 271 | 271 |
Reference value type &1 does not exist | ||
| 272 | 272 |
No changes were canceled | Space: object requires documentation | |
| 273 | 273 |
The last change has been reset | Space: object requires documentation | |
| 274 | 274 |
Specify a rate fact group for rate type &1 | Space: object requires documentation | |
| 275 | 275 |
Only specify one rate fact group for one rate type | Space: object requires documentation | |
| 276 | 276 |
Internal: field &1 from the installation is not filled | Space: object requires documentation | |
| 277 | 277 |
Field &1 from the rate category is not filled | Space: object requires documentation | |
| 278 | 278 |
Enter a rate type to be used for rate determination | Space: object requires documentation | |
| 279 | 279 |
Field &1 not filled in billing | ||
| 280 | 280 |
No period documents were found for period-end billing | Space: object requires documentation | |
| 281 | 281 |
Contract &1 sched. bill. date &2: BEGNACH for PE billing order is missing | Space: object requires documentation | |
| 282 | 282 |
&1 &2 is still being used | Space: object requires documentation | |
| 283 | 283 |
Internal: No data exists for installation &1 on &2 | Space: object requires documentation | |
| 284 | 284 |
Contract &1 scheduled billing date &2: no period documents found | Space: object requires documentation | |
| 285 | 285 |
Entry for document type &1 is missing from table TE667 | ||
| 286 | 286 |
No rate determination possible with rate category &1 | ||
| 287 | 287 |
Document type &1 is not in table TE093 | ||
| 288 | 288 |
To move the rate, select appropriate lines | Space: object requires documentation | |
| 289 | 289 |
Billing order deleted for contract &1 with scheduled billing date &2 | Space: object requires documentation | |
| 290 | 290 |
Schema &1: rate step for schema step &2 missing | ||
| 291 | 291 |
Document &1 to be reversed is not in file &2 | ||
| 292 | 292 |
Billing document &1 was already updated with invoicing document &2 | Space: object requires documentation | |
| 293 | 293 |
Internal: billing doc. &1 -> inconsistency due to field INTOPBEL &2 | Space: object requires documentation | |
| 294 | 294 |
Internal: billing document &1 -> inconsistent invoicing document &2 | Space: object requires documentation | |
| 295 | 295 |
Billing reversal of document no. &1 terminated due to an error | Space: object requires documentation | |
| 296 | 296 |
Reversal of document no. &1 completed | Space: object requires documentation | |
| 297 | 297 |
Billing document &1 has already been reversed | ||
| 298 | 298 |
Counter-document &1 (for &2) cannot be reversed | ||
| 299 | 299 |
Internal: no installation data exists | Space: object requires documentation | |
| 300 | 300 |
Billing document &1: STOKZ is set; INTBELNR is not set -> inconsistency | ||
| 301 | 301 |
ERCH doc. no. &1 inv. doc. no. &2: INTBELNR &3 does not match INTBELNR &4 | Space: object requires documentation | |
| 302 | 302 |
No rate category data exists | ||
| 303 | 303 |
ERCH doc. no. &1 ERDK doc. no. &2: STOKZ not set | Space: object requires documentation | |
| 304 | 304 |
ERDK doc.no. &1 and ERDK offsett.doc.no. &2 inconsistent due to doc.no.&3 | Space: object requires documentation | |
| 305 | 305 |
ERDK counter-document &1 (for &2): STOKZ must not be set | ||
| 306 | 306 |
Invoicing doc. &1: STBEL &2 does not match INTOPBEL &3 (for &4) | Space: object requires documentation | |
| 307 | 307 |
Invoicing offsetting document &1 (for &2) has incorrect STBEL &3 | Space: object requires documentation | |
| 308 | 308 |
Billing for contract &1 completed with document no. &2 | ||
| 309 | 309 |
Invoicing offsetting doc. &1 (for &2) has wrong BLART &3 (instead of ST) | Space: object requires documentation | |
| 310 | 310 |
Invoicing document &1: incorrect FKKOP-OPBEL &2 | Space: object requires documentation | |
| 311 | 311 |
Invoicing document &1: FKKOP-AUGBL &2 (instead of &3) | Space: object requires documentation | |
| 312 | 312 |
Invoicing document &1: FKKOP-AUGRD &2 (instead of 05) | Space: object requires documentation | |
| 313 | 313 |
Invoicing document &1: no entries found in FKKOP | Space: object requires documentation | |
| 314 | 314 |
Statistical rate &1 has division &2 and billing class &3 | ||
| 315 | 315 |
Statistical rate is not required for variant &1 | Space: object requires documentation | |
| 316 | 316 |
The statistical rate has the same rate number | Space: object requires documentation | |
| 317 | 317 |
Document &1: billing cancellation not possible | ||
| 318 | 318 |
Document &1: error updating billing cancellation | ||
| 319 | 319 |
Main transactions for billing are not fully maintained | ||
| 320 | 320 |
&1 is not a suitable sub-transaction | ||
| 321 | 321 |
For ENDIF variant in step &1 there is no corresponding IF variant | ||
| 322 | 322 |
Document &1 has simulation indicator &2 | ||
| 323 | 323 |
ELSE variant in step &1 is invalid | ||
| 324 | 324 |
There are &1 IF variants and &2 ENDIF variants | ||
| 325 | 325 |
Schema &1 does not contain complete rate &2 | ||
| 326 | 326 |
Doc. no. &1 / &2 (no period-end billing although ENDABRPE is the same) | ||
| 327 | 327 |
Please do not set steps without input operands to optional | ||
| 328 | 328 |
Variant &1 is not permissible for rate &2 | Space: object requires documentation | |
| 329 | 329 |
Period control is missing in step &2 for variant &1 | ||
| 330 | 330 |
Doc. &1 has more recent PE bill. per. &2 than doc. &3 (PE bill. per. &4) | Space: object requires documentation | |
| 331 | 331 |
The end of billing period of the following billing documents is later | Space: object requires documentation | |
| 332 | 332 |
Billing doc. &1 cannot be reversed because more recent docs exist | Space: object requires documentation | |
| 333 | 333 |
All steps for rate &1 are inactive | ||
| 334 | 334 |
Main transaction &1 not in table &2 | Space: object requires documentation | |
| 335 | 335 |
Document &1 with main transaction &2 cannot be reversed | ||
| 336 | 336 |
Document &1: period-end billings cannot be canceled at present | ||
| 337 | 337 |
Doc. &1 (period-end billing/backbilling) cannot be reversed at present | ||
| 338 | 338 |
No entry exists in table &1 for key &2 &3 | ||
| 339 | 339 |
Field &1 from accounts receivable and payable is not filled | ||
| 340 | 340 |
Please specify a valid rate fact group for rate type &1 | Space: object requires documentation | |
| 341 | 341 |
Internal: inst. &1 sch.bill.date &2 bi.proc. &3: bi.order already exists | Space: object requires documentation | |
| 342 | 342 |
Internal: EITR entry for doc. no. &1 company code &2 no longer exists | Space: object requires documentation | |
| 343 | 343 |
Contract &1: no billing order exists that can be processed | Space: object requires documentation | |
| 344 | 344 |
Contract &1: no billing orders exist | Space: object requires documentation | |
| 345 | 345 |
Contract &1: other billing order with targ. bill. date &2 has priority | Space: object requires documentation | |
| 346 | 346 |
<< End of document list <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< | ||
| 347 | 347 |
Billing reversal of documnet no. &1 is cancelled | Space: object requires documentation | |
| 348 | 348 |
The facts are not consistent | ||
| 349 | 349 |
Internal: more than one partner was found for contract &1: &2 partners | Space: object requires documentation | |
| 350 | 350 |
Internal: field &1 from the contract is not filled | Space: object requires documentation | |
| 351 | 351 |
Internal: inconsistency in file ERCHC | Space: object requires documentation | |
| 352 | 352 |
Price amount is zero (block maintenance may be necessary) | Space: object requires documentation | |
| 353 | 353 |
Enter a valid from-date | Space: object requires documentation | |
| 354 | 354 |
Price summary using indicator &1: different price categories | Space: object requires documentation | |
| 355 | 355 |
Price summary indicator &1 only used once | ||
| 356 | 356 |
Internal: field &1 was not filled | Space: object requires documentation | |
| 357 | 357 |
When an average price is used no other price is possible | ||
| 358 | 358 |
Contract &1: no period documents found | ||
| 359 | 359 |
Monthly period with period value & not permissible | Space: object requires documentation | |
| 360 | 360 |
Annual period with period value & not permissible | Space: object requires documentation | |
| 361 | 361 |
Franchise contract start date is later than contract end date | Space: object requires documentation | |
| 362 | 362 |
Cancellation period without cancellation time unit | Space: object requires documentation | |
| 363 | 363 |
Cancellation date is later than contract end date | Space: object requires documentation | |
| 364 | 364 |
Cancellation date is earlier than contract start date | Space: object requires documentation | |
| 365 | 365 |
No rate facts can be maintained for this rate | Space: object requires documentation | |
| 366 | 366 |
Blocks have already been maintained for this entry | ||
| 367 | 367 |
Entry &1 &2 already exists for &3 | Space: object requires documentation | |
| 368 | 368 |
Internal: contract field is not filled | Space: object requires documentation | |
| 369 | 369 |
Internal: Contr. &1 TargBillDate &2 BillTrans. &3: Inconsist. BillDocs | Space: object requires documentation | |
| 370 | 370 |
Installation &1 scheduled billing date &2: inconsistent billing orders | Space: object requires documentation | |
| 371 | 371 |
Bill. order for inst. &1 sch.bill.date &2 bill.proc. &3 not in selection | Space: object requires documentation | |
| 372 | 372 |
Installation &1: incorrect billing-order sequence in &2 | Space: object requires documentation | |
| 373 | 373 |
Installation &1 date &2: Multiple billing orders with status 2 | Space: object requires documentation | |
| 374 | 374 |
Inst. &1 sched. bill. date &2 bill. trans. &3: Inconsistent billing order | Space: object requires documentation | |
| 375 | 375 |
No billing orders that can be processed were selected | Space: object requires documentation | |
| 376 | 376 |
No contract exists for installation &1 | ||
| 377 | 377 |
Inst. &1 sched. bill.date &2 bill. proc. &3: PE bill. order not poss. now | Space: object requires documentation | |
| 378 | 378 |
Contract &1: no entries in table &2 | Space: object requires documentation | |
| 379 | 379 |
The last schema change could not be canceled | ||
| 380 | 380 |
Enter a valid value for the period | Space: object requires documentation | |
| 381 | 381 |
No reversed bill documents found | ||
| 382 | 382 |
No non-reversed bill documents found | ||
| 383 | 383 |
Date check: &1 &2 after &3 &4 | Space: object requires documentation | |
| 384 | 384 |
Inst. &1 scheduled bill. date &2 bill. procedure &3: status &4 incorrect | Space: object requires documentation | |
| 385 | 385 |
Installation &1: contract &2 must be billed first | Space: object requires documentation | |
| 386 | 386 |
Rate &1 updated; check indicators | Space: object requires documentation | |
| 387 | 387 |
Rate &1 is complete | Space: object requires documentation | |
| 388 | 388 |
Date &1 from-block &2 not found; cursor positioned on subsequent entry | Space: object requires documentation | |
| 389 | 389 |
It is not possible to delete block | ||
| 390 | 390 |
In variant &1 an input operand is missing in step &2 | ||
| 391 | 391 |
In variant &1 an output operand is missing in step &2 | ||
| 392 | 392 |
In variant &1 a control parameter is missing in step &2 | ||
| 393 | 393 |
Internal: log. reg. &1 equip. no. &2 reg. &3 date &4: no entry in IZWST | Space: object requires documentation | |
| 394 | 394 |
Logic reg. &1 equipment no. &2 reg. &3: replacement &4 | ||
| 395 | 395 |
Log. reg. &1 equip. no. &2 reg. &3: different no. of predecimal places | Space: object requires documentation | |
| 396 | 396 |
Rate determination not possible | ||
| 397 | 397 |
Operand determination not possible | ||
| 398 | 398 |
Date &1 not found; cursor positioned on subsequent entry | Space: object requires documentation | |
| 399 | 399 |
Before making selection, position cursor on a discount | Space: object requires documentation | |
| 400 | 400 |
Before making selection, position cursor on a price | Space: object requires documentation | |
| 401 | 401 |
Specify valid-from date and franchise fee group | Space: object requires documentation | |
| 402 | 402 |
This function is not available | Space: object requires documentation | |
| 403 | 403 |
Position cursor on a line in the historic data | Space: object requires documentation | |
| 404 | 404 |
Position cursor on interval to be deleted | Space: object requires documentation | |
| 405 | 405 |
All entries for 'valid from' &1 were deleted | ||
| 406 | 406 |
Position cursor on period to be copied | Space: object requires documentation | |
| 407 | 407 |
Please maintain time basis specifications fully | Space: object requires documentation | |
| 408 | 408 |
For price category 'flat rate' do not use price type 'block charge' | Space: object requires documentation | |
| 409 | 409 |
Error deleting change documents for price &1 | ||
| 410 | 410 |
Select one line only | Space: object requires documentation | |
| 411 | 411 |
Rate &1 still allocated in rate determination to schema &2 | ||
| 412 | 412 |
Price does not exist to &1, but to &2 | Space: object requires documentation | |
| 413 | 413 |
Price does not exist until &1 | Space: object requires documentation | |
| 414 | 414 |
Price has no time slices | Space: object requires documentation | |
| 415 | 415 |
Renewal date &1 is before contract end date &2 | Space: object requires documentation | |
| 416 | 416 |
Internal: facts were not checked | Space: object requires documentation | |
| 417 | 417 |
Discount/surcharge &1 is still used | Space: object requires documentation | |
| 418 | 418 |
Enter dates that do not overlap | Space: object requires documentation | |
| 419 | 419 |
Price &1, price category &2, price level &3 does not exist | Space: object requires documentation | |
| 420 | 420 |
Schema &1 contains no schema steps | Space: object requires documentation | |
| 421 | 421 |
Sub-transactions in schema &1 step &2 inconsistent | ||
| 422 | 422 |
Enter an address for streetlight &1 | ||
| 423 | 423 |
Error in operand &1 (fact group &3, season &2): | Space: object requires documentation | |
| 424 | 424 |
Value is too large for operand update | Space: object requires documentation | |
| 425 | 425 |
Inconsistent definition of operand groups | Space: object requires documentation | |
| 426 | 426 |
Price escalation clause &1 does not exist | Space: object requires documentation | |
| 427 | 427 |
Pr.cat. &1 pr.escal. clause &2 does not match pr.cat. &3 of price | ||
| 428 | 428 |
To-date must not be changed | ||
| 429 | 429 |
Operand value for date &1 must not be deleted | ||
| 430 | 430 |
Operand value for date &1 must not be deleted | ||
| 431 | 431 |
Enter a date starting from &1 | Space: object requires documentation | |
| 432 | 432 |
Internal: billing document &1 invoicing document &2: inconsistency | Space: object requires documentation | |
| 433 | 433 |
Internal: cont. &1 PE bill.per. &2 doc.no. &3 doc.no. &4: inconsistency | Space: object requires documentation | |
| 434 | 434 |
Non-invoiced document &1 before document &2 (invoice document &3) | ||
| 435 | 435 |
Price escalation clause &1 still used --> where-used list | ||
| 436 | 436 |
IF-ELSE-ENDIF unit has different rates | ||
| 437 | 437 |
IF variant found with incompatible validity period | ||
| 438 | 438 |
Not possible to specify both equipment and address | Space: object requires documentation | |
| 439 | 439 |
Internal: program/FM &1: from-date &2 after to-date &3 | Space: object requires documentation | |
| 440 | 440 |
Cal. val. dist. &1 cal. val. proc. &2 date &3: no billing cal. value | Space: object requires documentation | |
| 441 | 441 |
Calorific value district &1 date &2: no entry in V_TE449 | ||
| 442 | 442 |
Energy feeding volume from table &1 in period &2 - &3 is zero | Space: object requires documentation | |
| 443 | 443 |
Entries in &1 do not cover the period &2 - &3 | ||
| 444 | 444 |
Entry for date &1 in table &2 not maintained | ||
| 445 | 445 |
These schema steps do not generate billing line items | ||
| 446 | 446 |
Temperature area &1 date &2: no entry in V_TE449 | Space: object requires documentation | |
| 447 | 447 |
In installation &1, there is a register without a rate type | ||
| 448 | 448 |
Please enter a schema which belongs to billing class &1 | ||
| 449 | 449 |
Values already exist for operand &1 in season &2 | ||
| 450 | 450 |
Values already exist for operand &1 | Space: object requires documentation | |
| 451 | 451 |
Air pressure area &1 date &2: no entry in V_TE339 | ||
| 452 | 452 |
The season periods are inconsistent | ||
| 453 | 453 |
Please transfer meter reading relevant to billing | Space: object requires documentation | |
| 454 | 454 |
Please transfer previous meter reading relevant to billing | Space: object requires documentation | |
| 455 | 455 |
Please transfer meter reading date for meter reading relevant to billing | Space: object requires documentation | |
| 456 | 456 |
Please specify a valid date as season limit | Space: object requires documentation | |
| 457 | 457 |
Sub-transactions &1 in comp. code &2 div. &3 acct det. ID &4 inconsistent | Space: object requires documentation | |
| 458 | 458 |
Please specify the pre-sorting key &2 in schema step &1 | Space: object requires documentation | |
| 459 | 459 |
Enter an amount | Space: object requires documentation | |
| 460 | 460 |
Output operand &1 is not unique | ||
| 461 | 461 |
Enter the Required Data | Space: object requires documentation | |
| 462 | 462 |
Enter weighting key only for weighted calculation of average | Space: object requires documentation | |
| 463 | 463 |
Enter weighting key only for weighting according to TE415 | Space: object requires documentation | |
| 464 | 464 |
Enter weighting key or weighting/calorific value district | Space: object requires documentation | |
| 465 | 465 |
Weighting key &1 search criterion &2: period &3 - &4 not covered | Space: object requires documentation | |
| 466 | 466 |
Weighting key &1 division category &2: entry for date &3 not maintained | Space: object requires documentation | |
| 467 | 467 |
Weighting key &1 div. cat. &2 period &3-&4: energy feeding volume zero | Space: object requires documentation | |
| 468 | 468 |
Maintain weighting key for averaging type "weighted average" | Space: object requires documentation | |
| 469 | 469 |
Maintain weighting key for air pressure "weighted average" | Space: object requires documentation | |
| 470 | 470 |
Enter weighting key only for weighted calculation of average | Space: object requires documentation | |
| 471 | 471 |
Successful: program &1 client &2 file &3 number &4 deleted | ||
| 472 | 472 |
Object contains no operands | Space: object requires documentation | |
| 473 | 473 |
Enter a value in field "Value 1" | Space: object requires documentation | |
| 474 | 474 |
Enter a value in field "Value 2" | Space: object requires documentation | |
| 475 | 475 |
No entry required here for variant &1 | Space: object requires documentation | |
| 476 | 476 |
The to-date for &1 has been adjusted | Space: object requires documentation | |
| 477 | 477 |
Enter a rate type | Space: object requires documentation | |
| 478 | 478 |
Inconsist. installation structure for device/register &1 from instln &2 | ||
| 479 | 479 |
This change of logical register &1 not permitted | Space: object requires documentation | |
| 480 | 480 |
Discount &1 does not exist in table &2 | ||
| 481 | 481 |
No text exists in language &2 for discount &1 | ||
| 482 | 482 |
Enter a rate type to be used for determining a demand rate | Space: object requires documentation | |
| 483 | 483 |
Enter a rate type to be used for determining an energy rate | Space: object requires documentation | |
| 484 | 484 |
Enter a permissible rate type | Space: object requires documentation | |
| 485 | 485 |
Conversion of rounding category from '0' to 'X' started on &1 at &2 | ||
| 486 | 486 |
Error updating table &1 | ||
| 487 | 487 |
Enter a schema that corresponds to division &1 | Space: object requires documentation | |
| 488 | 488 |
Value &1 cannot be entered for &2 | ||
| 489 | 489 |
Billing classes do not match | ||
| 490 | 490 |
Operation mode &3 is not maintained from &1 to &2 | Space: object requires documentation | |
| 491 | 491 |
Units of measurement do not match | ||
| 492 | 492 |
Reference bases do not match | ||
| 493 | 493 |
Discount types do not match | ||
| 494 | 494 |
Do not use register discount in the facts | Space: object requires documentation | |
| 495 | 495 |
Entry for date &1 already exists | ||
| 496 | 496 |
Copy only possible in a year that is later than the reference year | ||
| 497 | 497 |
Entries exist in year &1 which are being overwritten | Space: object requires documentation | |
| 498 | 498 |
No entries to be copied exist in specified year &1 | Space: object requires documentation | |
| 499 | 499 |
No maintenance type defined for burning hour calendar from &1 to &2 | Space: object requires documentation | |
| 500 | 500 |
Copying year &1 to year &2 has been completed successfully | Space: object requires documentation | |
| 501 | 501 |
Not possible to copy because of change in maintenance type in year &1 | Space: object requires documentation | |
| 502 | 502 |
Maintenance types for years &1 and &2 do not match | Space: object requires documentation | |
| 503 | 503 |
Table is consistent in check period &1 to &2 for operation mode &3 | Space: object requires documentation | |
| 504 | 504 |
Use only the first of the month as the from-date | Space: object requires documentation | |
| 505 | 505 |
Equip. no. &1 reg. &2 (log. reg. &3): at least &4 MR results required | ||
| 506 | 506 |
Termination because runtime was exceeded | ||
| 507 | 507 |
Conversion started from space to 'X' for print-relevant indic. in DBERCHZ | ||
| 508 | 508 |
Enter a simulation period | Space: object requires documentation | |
| 509 | 509 |
Enter a to-date for the overall check | Space: object requires documentation | |
| 510 | 510 |
Enter &1 | Space: object requires documentation | |
| 511 | 511 |
Program &1 routine &2: Overflow of internal meters for MR doc. numbers | Space: object requires documentation | |
| 512 | 512 |
Display option not possible for the operand | ||
| 513 | 513 |
Internal error reading the billing line items | ||
| 514 | 514 |
Enter a line item number between 1 and &1 | Space: object requires documentation | |
| 515 | 515 |
Billing document &1 has no billing line items | ||
| 516 | 516 |
Error during update of operand &1 | ||
| 517 | 517 |
Indicator for flat-rate installation changed (routine &1) | ||
| 518 | 518 |
Operand &1 updates in schema step with register data | ||
| 519 | 519 |
Schema &1: no steps in period &2 to &3 | Space: object requires documentation | |
| 520 | 520 |
Enter rate types that result in the same weighting | Space: object requires documentation | |
| 521 | 521 |
Select an operand | Space: object requires documentation | |
| 522 | 522 |
No update for step &1 operand &2 | ||
| 523 | 523 |
Transport entry created for gas procedure &1 | ||
| 524 | 524 |
Rate is not valid for registers; note the entry restrictions | Space: object requires documentation | |
| 525 | 525 |
Transport entry created for billing calorific value &1-&2 | ||
| 526 | 526 |
Transport entry created for calorific value procedure &1 | ||
| 527 | 527 |
Transport entry created for volume correction factor procedure &1 | ||
| 528 | 528 |
Units of measurement do not match for operands &1 and &2 | Space: object requires documentation | |
| 529 | 529 |
Enter a valid numeric value (&1 pre-decimal places, &2 decimal places) | Space: object requires documentation | |
| 530 | 530 |
Enter a valid numeric value (2 pre-decimal places, 4 decimal places) | Space: object requires documentation | |
| 531 | 531 |
Enter a valid numeric value (2 pre-decimal places, 1 decimal place) | Space: object requires documentation | |
| 532 | 532 |
Do not enter a +/- sign for values of zero | Space: object requires documentation | |
| 533 | 533 |
Enter a +/- sign for values not equal to zero | Space: object requires documentation | |
| 534 | 534 |
Interal: split error: &1 -> &2 - &3 in &4 | Space: object requires documentation | |
| 535 | 535 |
Select a rate from the list | Space: object requires documentation | |
| 536 | 536 |
No rate can be found using rate type &1 and rate category &2 | ||
| 537 | 537 |
Rate &1 was determined | ||
| 538 | 538 |
Maintain from-measured pressure | Space: object requires documentation | |
| 539 | 539 |
Maintain to-measured pressure | Space: object requires documentation | |
| 540 | 540 |
Internal: eq.no. &1 reg. &2 per. &3-&4: no entries in IZW (form THGAS_ZW) | Space: object requires documentation | |
| 541 | 541 |
Internal: function module &1 include/routine &2 table &3 empty | Space: object requires documentation | |
| 542 | 542 |
Device &1 register &2 period &3 - &4: calorific value district is missing | Space: object requires documentation | |
| 543 | 543 |
Internal: indicator &1 period &2 - &3 not found in &4 | Space: object requires documentation | |
| 544 | 544 |
Log. register &1 period &2 - &3 not found in &4 | ||
| 545 | 545 |
Enter a rate type | Space: object requires documentation | |
| 546 | 546 |
CV district &1 CV proced. &2 date &3: billing calorific value is missing | ||
| 547 | 547 |
CV procedure &1 CV district &2: billing calorific value is missing | ||
| 548 | 548 |
CV dist. &1 CV proc. &2 <= date &3: billing calorific value is missing | ||
| 549 | 549 |
Internal: field &1: value &2 (routine &3 program &4) not defined | Space: object requires documentation | |
| 550 | 550 |
Budget billing main transactions are not maintained completely | Space: object requires documentation | |
| 551 | 551 |
Divisions do not match | Space: object requires documentation | |
| 552 | 552 |
Not possible to determine measured pressure for the period &1 - &2 | Space: object requires documentation | |
| 553 | 553 |
No rate steps with sub-transactions exist | Space: object requires documentation | |
| 554 | 554 |
Conversion of meter reading reasons started in EABLG | ||
| 555 | 555 |
No pressure area found for period &1 - &2 | ||
| 556 | 556 |
Error deleting table &1 | Space: object requires documentation | |
| 557 | 557 |
Not possible to determine pressure area for period &1 - &2 | ||
| 558 | 558 |
Sub-transactions are inconsistent | ||
| 559 | 559 |
Not possible to determine altitude correction pressure for period &1 - &2 | ||
| 560 | 560 |
Air pressure area &1 from-date &2: entry missing in table &1 | ||
| 561 | 561 |
Air pressure area &1: no entries exist in table &2 | ||
| 562 | 562 |
Not possible to determine annual air pressure for period &1 - &2 | ||
| 563 | 563 |
Air pressure area &1 date &2: entry missing in table &3 | ||
| 564 | 564 |
Air pressure area &1 <= date &2: air pressure missing in &3 | ||
| 565 | 565 |
Volume corr. factor proc. &1: temp. fields not maintained completely | ||
| 566 | 566 |
No temperature area found for period &1 - &2 | ||
| 567 | 567 |
Not possible to determine temperature area for period &1 - &3 | Space: object requires documentation | |
| 568 | 568 |
No fixed temperature found in period &1 - &2 | ||
| 569 | 569 |
Not possible to determine fixed temperature key for period &1 - &2 | ||
| 570 | 570 |
Temperature area &1: no entries in table &2 | ||
| 571 | 571 |
Not possible to maintain before &1 | ||
| 572 | 572 |
Fixed temperature &1: no temperature values exist in table &2 | ||
| 573 | 573 |
Not possible to determine fixed temperature values for period &1 - &2 | ||
| 574 | 574 |
Dev.&1 reg.&2 VCF proc.&3: not poss.to det. gas law dev.fact.- miss.temp. | ||
| 575 | 575 |
Dev.&1 reg.&2 per.&3-&4: meas.press. missing for det. of GasLawDev.factor | ||
| 576 | 576 |
Dev. &1 reg. &2 per. &3 - &4: temp. missing for det. of gas law dev.fact. | ||
| 577 | 577 |
Meas. pressure &1 +/- sign &2 temperature &3 not in table &4 | ||
| 578 | 578 |
Values for operand &1 must not be deleted | ||
| 579 | 579 |
Error in the automation data for operand &1 (season &2) | ||
| 580 | 580 |
Only manual documents can be processed | ||
| 581 | 581 |
Dev. &1 reg. &2 per. &3-&4: GLDF(set) missg for determ. gas law dev.fact. | Space: object requires documentation | |
| 582 | 582 |
&1 contains no sub-transactions | ||
| 583 | 583 |
Device &1 reg. &2 period &3 - &4: no actual gas law deviation factor | Space: object requires documentation | |
| 584 | 584 |
Rate &1 step &2: sub-transactions not maintained completely | ||
| 585 | 585 |
Billing class &1 air pressure area &2 temp. area &3: no entries in &4 | Space: object requires documentation | |
| 586 | 586 |
Not poss. to determine fixed gas law deviation factors for period &1 - &2 | ||
| 587 | 587 |
Device &1 reg. &2 VCF proc. &3: no fixed volume correction factor in &4 | ||
| 588 | 588 |
Device &1 reg. &2 gas proc. &3 comparison &4: data inconsistency | Space: object requires documentation | |
| 589 | 589 |
Errors have occurred in rate determination | ||
| 590 | 590 |
Dev. &1 reg. &2 VCF proc. &3: reg. relat. ZZ cannot be billed presently | ||
| 591 | 591 |
Dev. &1 reg. &2 VCF proc. &3: reg. relat. ZE cannot be billed presently | ||
| 592 | 592 |
Billing class &1: no entries in &2 | Space: object requires documentation | |
| 593 | 593 |
Not possible to maintain franchise tax category in average price | ||
| 594 | 594 |
Program &1 client &2 file &3 number &4 converted successfully | ||
| 595 | 595 |
Rounding &1 is larger than &2 | ||
| 596 | 596 |
Round. rules for Wobbe factor only req. for correcting gas law dev.factor | ||
| 597 | 597 |
Bill. class &1 cal. value proc. &2 must match billing class &3 | ||
| 598 | 598 |
Bill. class &1 vol. corr. factor proc. &2 must match billing class &3 | ||
| 599 | 599 |
Billing class &1 does not match billing class &2 gas procedure &3 | Space: object requires documentation | |
| 600 | 600 |
No billing documents were reversed | ||
| 601 | 601 |
The following billing documents were reversed: | ||
| 602 | 602 |
Schema step &1 cannot be executed | ||
| 603 | 603 |
Log. register &1 from &2 to &3: no entry in ITHG | ||
| 604 | 604 |
Backbilling group &1 in step &2 is inconsistent | ||
| 605 | 605 |
Maintain the 'execute backbilling' indicator in step &1 | ||
| 606 | 606 |
Specify the length of the backbilling period | Space: object requires documentation | |
| 607 | 607 |
Specify the difference between periodic billing and period-end billing | ||
| 608 | 608 |
Equip. no. &1 reg. &2 from &3 to &4: no entry in ITHG | Space: object requires documentation | |
| 609 | 609 |
(Device &1) equip. no. &2 reg. &3 key date &4: no entry in ITHG | Space: object requires documentation | |
| 610 | 610 |
Enter document number(s) | Space: object requires documentation | |
| 611 | 611 |
Document &1 has already been released and can no longer be changed | ||
| 612 | 612 |
Air pressure area &1 <= date &2: air pressure missing in &3 | ||
| 613 | 613 |
Reversal terminated with error | ||
| 614 | 614 |
Reversal carried out successfully | ||
| 615 | 615 |
Fixed temperature &1 not in table &2 | Space: object requires documentation | |
| 616 | 616 |
Choose a valid billing line item as reference | Space: object requires documentation | |
| 617 | 617 |
Choose a different line item to delete | Space: object requires documentation | |
| 618 | 618 |
&1 tax line item(s) generated | Space: object requires documentation | |
| 619 | 619 |
Enter a to-date for the budget billing simulation | Space: object requires documentation | |
| 620 | 620 |
Allocation date &1 default value &2: permissible deviation +/- &3 month | Space: object requires documentation | |
| 621 | 621 |
Gas date &1 default value &2: deviation of maximum &3 months | Space: object requires documentation | |
| 622 | 622 |
No entry in table &1 for bill.class/bill. trans./portion/background &2 | Space: object requires documentation | |
| 623 | 623 |
Default &1 is greater than permitted deviation &2 | Space: object requires documentation | |
| 624 | 624 |
&1 document line items were generated by automatic proration | Space: object requires documentation | |
| 625 | 625 |
Delete value &1 in field &2 | Space: object requires documentation | |
| 626 | 626 |
Select price category &1 | Space: object requires documentation | |
| 627 | 627 |
There is no secondary meter for the primary meter | Space: object requires documentation | |
| 628 | 628 |
Primary meter device &1 register &2 is its own secondary meter | Space: object requires documentation | |
| 629 | 629 |
There are two primary meters for secondary meter device &1 register &2 | Space: object requires documentation | |
| 630 | 630 |
Gas proc.&1: MUnit bef. conv.w. CV &2 uneq. to MUnit after conv.w. VCF &3 | Space: object requires documentation | |
| 631 | 631 |
Specify the length of the period-end billing period | Space: object requires documentation | |
| 632 | 632 |
Tax code could not be determined | Space: object requires documentation | |
| 633 | 633 |
External price &1 price cat. &2 price level &3: incorrect history table | Space: object requires documentation | |
| 634 | 634 |
CV dist. &1 CV proc. &2 <= date &3: billing calorific value is missing | Space: object requires documentation | |
| 635 | 635 |
No installation is allocated to the contract | Space: object requires documentation | |
| 636 | 636 |
Contract &1 not found in &2 | Space: object requires documentation | |
| 637 | 637 |
Enter a demand | Space: object requires documentation | |
| 638 | 638 |
Temperature area &1 <= date &2: temperature missing in &3 | Space: object requires documentation | |
| 639 | 639 |
Temperature area &1 <= date &2: temperature missing in &3 | Space: object requires documentation | |
| 640 | 640 |
FM &1: Parameters &2 and &3 cannot be specified simultaneously | Space: object requires documentation | |
| 641 | 641 |
FM &1: parameter &2 is required | Space: object requires documentation | |
| 642 | 642 |
Device &1 register number &3 has no rate type on &4 | Space: object requires documentation | |
| 643 | 643 |
Price &1 price category &2 price level &3 in currency &4 already exists | Space: object requires documentation | |
| 644 | 644 |
Price &1 price category &2 price level &3: other currency &4 exists | Space: object requires documentation | |
| 645 | 645 |
Price &1 price category &2 price level &3 currency &4: history missing | Space: object requires documentation | |
| 646 | 646 |
Price &1 price category &2 price level &3: price type &4 is ignored | Space: object requires documentation | |
| 647 | 647 |
Only time basis &2 is permissible for time category &1 | Space: object requires documentation | |
| 648 | 648 |
FM &1: do not enter parameters &2 and &3 simultaneously | Space: object requires documentation | |
| 649 | 649 |
Price &1 price category &2 price level &3: currency &4 deleted | Space: object requires documentation | |
| 650 | 650 |
Franchise fee group &1 has billing class &2 instead of &3 | Space: object requires documentation | |
| 651 | 651 |
Price &1 price category &2 price level &3 currency &4: deletion error | Space: object requires documentation | |
| 652 | 652 |
FM &1: parameter &2 or &3 is required in order to delete | Space: object requires documentation | |
| 653 | 653 |
Device &1 register &2 has negative consumption deduction | Space: object requires documentation | |
| 654 | 654 |
No meter reading result exists on &3 for device &1 register &2 | Space: object requires documentation | |
| 655 | 655 |
Historical data is not taken into account | Space: object requires documentation | |
| 656 | 656 |
Only quantity base 1 is permitted for average prices | Space: object requires documentation | |
| 657 | 657 |
Update in price &1 not permitted | Space: object requires documentation | |
| 658 | 658 |
Operand &1 for updating price: inconsistent parameters | Space: object requires documentation | |
| 659 | 659 |
Specify a currency key | Space: object requires documentation | |
| 660 | 660 |
Manual credit memo/backbilling &1 cannot be reversed | Space: object requires documentation | |
| 661 | 661 |
Volume correction factor procedure &1 is not active | Space: object requires documentation | |
| 662 | 662 |
Calorific value procedure &1 is not active | Space: object requires documentation | |
| 663 | 663 |
Key date is missing for month-based billing | Space: object requires documentation | |
| 664 | 664 |
Enter a price level for rental prices | Space: object requires documentation | |
| 665 | 665 |
Key date is required for access control for operand &1 | Space: object requires documentation | |
| 666 | 666 |
No meter reading unit in table &1 for date &2 (include &3) | Space: object requires documentation | |
| 667 | 667 |
Not possible to determine alloc. date for meter reading unit &1 date &2 | Space: object requires documentation | |
| 668 | 668 |
Specify an average price that is calculated at runtime | Space: object requires documentation | |
| 669 | 669 |
Enter the replacement value "Runtime" | Space: object requires documentation | |
| 670 | 670 |
Only selection &2 is permissible for meter reading reason &1 | Space: object requires documentation | |
| 671 | 671 |
Sub-transaction &1 has a special meaning | Space: object requires documentation | |
| 672 | 672 |
Operand &1 does not belong to division &2 | Space: object requires documentation | |
| 673 | 673 |
Sub-transaction &1 has incorrect debit/credit indicator | Space: object requires documentation | |
| 674 | 674 |
Not permissible to maintain operand &1 in the installation facts | Space: object requires documentation | |
| 675 | 675 |
Not permissible to maintain operand &1 in the rate category facts | Space: object requires documentation | |
| 676 | 676 |
Avg. prices with starting val. can be maintained in the inst. facts only | Space: object requires documentation | |
| 677 | 677 |
Avg prices are possible only for time- and quantity-based price operands | Space: object requires documentation | |
| 678 | 678 |
Sub-transaction &1 does not exist in table TE305 for division &2 | Space: object requires documentation | |
| 679 | 679 |
Not permissible to maintain operand &1 in the rate facts | Space: object requires documentation | |
| 680 | 680 |
Device &1 reg. &2 (log. reg. &3): min. of &4 meter reading results reqd | Space: object requires documentation | |
| 681 | 681 |
You cannot change the currency for an amount already calculated | Space: object requires documentation | |
| 682 | 682 |
You are not permitted to specify a document number | Space: object requires documentation | |
| 683 | 683 |
Specify a value that has no more than &1 decimal places | Space: object requires documentation | |
| 684 | 684 |
Dev. &1 reg. &2 per. &3-&4: No MR result marking start of billing period | Space: object requires documentation | |
| 685 | 685 |
Dev. &1 reg. &2 per. &3-&4: No MR result marking end of billing period | Space: object requires documentation | |
| 686 | 686 |
Billing order selection contains no entries | Space: object requires documentation | |
| 687 | 687 |
Enter a franchise fee price that is calculated at runtime | Space: object requires documentation | |
| 688 | 688 |
Enter an end date | Space: object requires documentation | |
| 689 | 689 |
Routine &1 include &2: parameter &3 not specified | Space: object requires documentation | |
| 690 | 690 |
Deviation of meter reading results: min. date &1 max. date &2 | Space: object requires documentation | |
| 691 | 691 |
Device &1 register &2 date &3: (periodic) meter reading result missing | Space: object requires documentation | |
| 692 | 692 |
Billing document &1: end of billing period is missing | Space: object requires documentation | |
| 693 | 693 |
Gas procedure &1 is not permitted | Space: object requires documentation | |
| 694 | 694 |
Gas procedure &1 vol. corr. factor proc. &2: fixed temp. key is missing | Space: object requires documentation | |
| 695 | 695 |
Gas procedure &1 vol. corr. factor proc. &2: temp. area is missing | Space: object requires documentation | |
| 696 | 696 |
Gas procedure &1 vol. corr. factor proc. &2: pressure area is missing | Space: object requires documentation | |
| 697 | 697 |
Gas proc. &1 vol. corr. factor proc. &2: altitude correct. press. is zero | Space: object requires documentation | |
| 698 | 698 |
Gas proc. &1 vol. corr. factor proc. &2: set gas law dev. factor is zero | Space: object requires documentation | |
| 699 | 699 |
Gas proc. &1 vol. corr. factor proc. &2: actual gas law dev.fact. is zero | Space: object requires documentation | |
| 700 | 700 |
Gas proc. &1 cal. value proc. &2: cal. value district is missing | Space: object requires documentation | |
| 701 | 701 |
Specify a price with suitable franchise category &1 | Space: object requires documentation | |
| 702 | 702 |
Do not enter a rate type | Space: object requires documentation | |
| 703 | 703 |
Inconsistent period control for operand &1 | Space: object requires documentation | |
| 704 | 704 |
Do not specify an original value for operand &1 | Space: object requires documentation | |
| 705 | 705 |
You are not permitted to use presort key &1 in the schema | Space: object requires documentation | |
| 706 | 706 |
Specify a division | Space: object requires documentation | |
| 707 | 707 |
Meter reading results are incorrect for the following devices/registers: | Space: object requires documentation | |
| 708 | 708 |
Device &1 register &2 scheduled meter reading date &3 | Space: object requires documentation | |
| 709 | 709 |
Equipment no. &1 register &2 scheduled meter reading date &3 | Space: object requires documentation | |
| 710 | 710 |
Period control and specification of billing period are inconsistent | Space: object requires documentation | |
| 711 | 711 |
Period control and specifications in the portion are inconsistent | Space: object requires documentation | |
| 712 | 712 |
Billing document &1 was outsorted | Space: object requires documentation | |
| 713 | 713 |
Measured pressure &1 is not permissible | Space: object requires documentation | |
| 714 | 714 |
Dev. &1 reg. &2 date &3: move-in meter read. result missing or incorrect | Space: object requires documentation | |
| 715 | 715 |
Beginning of error list | Space: object requires documentation | |
| 716 | 716 |
End of error list | Space: object requires documentation | |
| 717 | 717 |
Billing doc. &1 invoicing doc. &2 deleted by user &3 via report &4 | Space: object requires documentation | |
| 718 | 718 |
Enter a document number you wish to delete | Space: object requires documentation | |
| 719 | 719 |
Final billing has already been performed for contract &1 | Space: object requires documentation | |
| 720 | 720 |
Enter a valid date | Space: object requires documentation | |
| 721 | 721 |
Error in the automation data for operand &1 (season &2) | Space: object requires documentation | |
| 722 | 722 |
Before making selection, specify a from-date | Space: object requires documentation | |
| 723 | 723 |
No inconsistencies found in the sub-transactions | Space: object requires documentation | |
| 724 | 724 |
You must specify a currency for average prices with a start value | Space: object requires documentation | |
| 725 | 725 |
Internal: function module &1 was called in direct input | Space: object requires documentation | |
| 726 | 726 |
Rate step &1 variant &2: data entered in fields not ready for input | Space: object requires documentation | |
| 727 | 727 |
Installation &1 not found (access FM &2) | Space: object requires documentation | |
| 728 | 728 |
Installation &1 key date &2 not found (access FM &3) | Space: object requires documentation | |
| 729 | 729 |
Maintain the adding and the multiplying component | Space: object requires documentation | |
| 730 | 730 |
Installation &1 scheduled billing date &2: meter reading date &3 <> &4 | Space: object requires documentation | |
| 731 | 731 |
Billing document &1: outsorting with print document &2 | Space: object requires documentation | |
| 732 | 732 |
Billing document &1 print document &2: Ind1 &3 = Ind2 &4 | Space: object requires documentation | |
| 733 | 733 |
Enter 2, 3, 4, 6 or 12 | Space: object requires documentation | |
| 734 | 734 |
Document &1: no PE billing order with start of PE billing period &2 | Space: object requires documentation | |
| 735 | 735 |
Period control &1 not permitted for period-end billing | Space: object requires documentation | |
| 736 | 736 |
Outsorting in case of manual document &1: inconsistency | Space: object requires documentation | |
| 737 | 737 |
Enter a contract account | Space: object requires documentation | |
| 738 | 738 |
Contract account &1 deleted by user &2 report &3 | Space: object requires documentation | |
| 739 | 739 |
Enter invoicing document number or billing document number(s) | Space: object requires documentation | |
| 740 | 740 |
Specify either invoicing document number(s) or billing document number(s) | Space: object requires documentation | |
| 741 | 741 |
Billing documents for adjustment reversal have not been selected | Space: object requires documentation | |
| 742 | 742 |
Document &1 is a simulation document | Space: object requires documentation | |
| 743 | 743 |
Document &1 has been outsorted | Space: object requires documentation | |
| 744 | 744 |
Invoicing doc. &1: no billing documents for adjustment reversal | Space: object requires documentation | |
| 745 | 745 |
Billing doc. &1 reversed for adjustment (comp. doc. &2) | Space: object requires documentation | |
| 746 | 746 |
Adjustment reversal not possible for manual billing &1 | Space: object requires documentation | |
| 747 | 747 |
Billing document &1 was reversed for adjustment (invoicing doc. &2) | Space: object requires documentation | |
| 748 | 748 |
Billing document &1 cannot be reversed for adjustment | Space: object requires documentation | |
| 749 | 749 |
Billing document &1 is not invoiced -> adjustment reversal not possible | Space: object requires documentation | |
| 750 | 750 |
Specify a schema that contains backbilling steps | Space: object requires documentation | |
| 751 | 751 |
Specify a schema that contains a period-end billing rate | Space: object requires documentation | |
| 752 | 752 |
Operand &1: control fields for demand are filled | Space: object requires documentation | |
| 753 | 753 |
Number of demand peaks is 0 for register operand &1 | Space: object requires documentation | |
| 754 | 754 |
Register operands only possible for operand categories QUANT or DEMAND | Space: object requires documentation | |
| 755 | 755 |
Maximum line item &1 not equal to &2 (FM &3) | Space: object requires documentation | |
| 756 | 756 |
Register indicator is not set for operand &1 | Space: object requires documentation | |
| 757 | 757 |
Not possible to maintain facts for operand &1 | Space: object requires documentation | |
| 758 | 758 |
Document &1 cannot be reversed for adjustment due to document &2 | Space: object requires documentation | |
| 759 | 759 |
Operand &1 is a register operand | Space: object requires documentation | |
| 760 | 760 |
Doc. &1 -> doc. &2: inconsistent concatenation due to doc. &3 | Space: object requires documentation | |
| 761 | 761 |
Doc. &1 cannot be reversed (-> period-end bill. order with adj. reversal) | Space: object requires documentation | |
| 762 | 762 |
Doc. &4 is not indicated in table ERCHC as reversed for adjustment | Space: object requires documentation | |
| 763 | 763 |
Document &4 is not indicated in table ERCHC as invoiced | Space: object requires documentation | |
| 764 | 764 |
Doc. &4 has doc. number that refers to new billing despite billing order | Space: object requires documentation | |
| 765 | 765 |
Not possible to delete billing order because of document number &1 | Space: object requires documentation | |
| 766 | 766 |
Document &4 -> invoicing document &3 not reversed in invoicing | Space: object requires documentation | |
| 767 | 767 |
Operand &1 used for proration purposes only | Space: object requires documentation | |
| 768 | 768 |
Variant &2 updates to the installation facts | Space: object requires documentation | |
| 769 | 769 |
Doc. no. &4: billing order not marked w. doc. no. for adjustmt reversal | Space: object requires documentation | |
| 770 | 770 |
Variant &1 updates to the correction periods | Space: object requires documentation | |
| 771 | 771 |
Doc. no. &4 does not correspond to doc. no. &3 in billing order | Space: object requires documentation | |
| 772 | 772 |
Operand &1 is provided by a special update | Space: object requires documentation | |
| 773 | 773 |
Not possible to change the rate category | Space: object requires documentation | |
| 774 | 774 |
Deletion of doc. no. "adjustment reversal" from billing order: terminated | Space: object requires documentation | |
| 775 | 775 |
Deletion of doc. no. "adjustment reversal" from billing order: completed | Space: object requires documentation | |
| 776 | 776 |
No billing orders were changed | Space: object requires documentation | |
| 777 | 777 |
Following document numbers were deleted from billing orders: | Space: object requires documentation | |
| 778 | 778 |
Not possible to change the rate category | Space: object requires documentation | |
| 779 | 779 |
Doc. &1 (inv.doc. &2) del. from bill.order for inst. &3 sch. bill.date &4 | Space: object requires documentation | |
| 780 | 780 |
Deletion of doc. no. &1 from billing order: terminated due to error | Space: object requires documentation | |
| 781 | 781 |
Document no. &4: no changeable billing order exists | Space: object requires documentation | |
| 782 | 782 |
Error in user exit EXIT_SAPLEA01_001 | Space: object requires documentation | |
| 783 | 783 |
Error in user exit EXIT_SAPLEA00_001 | Space: object requires documentation | |
| 784 | 784 |
Error processing external proration dates | Space: object requires documentation | |
| 785 | 785 |
Price summary with indicator &1: different backbilling indicators | Space: object requires documentation | |
| 786 | 786 |
Billing document &1 not indicated as reversed for adjustment | Space: object requires documentation | |
| 787 | 787 |
Billing doc. &1 reversed for adjustment already reversed in invoicing | Space: object requires documentation | |
| 788 | 788 |
Billing document &1: adjustment reversal indicator is inconsistent | Space: object requires documentation | |
| 789 | 789 |
Variant &1 updates from correction period to periodic billing period | Space: object requires documentation | |
| 790 | 790 |
Update type &1 not permitted for period category &2 | Space: object requires documentation | |
| 791 | 791 |
Update type &1 not permitted for operand category &2 | Space: object requires documentation | |
| 792 | 792 |
Device &1 register &2 (log. reg. &3): MR result missing for &4 | Space: object requires documentation | |
| 793 | 793 |
Unknown calculation reason: &1 | Space: object requires documentation | |
| 794 | 794 |
Error in user exit EXIT_SAPLE20Q_001 | Space: object requires documentation | |
| 795 | 795 |
Operand &1 has non-linear weighting &2 | Space: object requires documentation | |
| 796 | 796 |
Error in user exit EXIT_SAPLE20Q_002 | Space: object requires documentation | |
| 797 | 797 |
Enter selection criteria | Space: object requires documentation | |
| 798 | 798 |
Complete history is not permitted for operand category &1 | Space: object requires documentation | |
| 799 | 799 |
Error in user exit EXIT_SAPLEA01_002 | Space: object requires documentation | |
| 800 | 800 |
IF-ELSE-ENDIF clause with different backbilling allocation indicators | Space: object requires documentation | |
| 801 | 801 |
Maintenance of bill printout operands not permitted | Space: object requires documentation | |
| 802 | 802 |
Operand &1: "bill printout history" indicator has incorrect value | Space: object requires documentation | |
| 803 | 803 |
Update in operand &1 not permitted | Space: object requires documentation | |
| 804 | 804 |
Billing unit of measurement could not be determined | Space: object requires documentation | |
| 805 | 805 |
Position cursor on a device or register | Space: object requires documentation | |
| 806 | 806 |
Enter standard temperature/zero temperature | Space: object requires documentation | |
| 807 | 807 |
Not possible to maintain standard temperature/zero temperature | Space: object requires documentation | |
| 808 | 808 |
Time basis and time cat. required when you enter consumption or amount | Space: object requires documentation | |
| 809 | 809 |
Specify the currency for the amount | Space: object requires documentation | |
| 810 | 810 |
Device &1 reg. &2 period &3 - &4: vol. corr. factor cannot be determined | Space: object requires documentation | |
| 811 | 811 |
Device &1 reg. &2 period &3 - &4: standard volume cannot be determined | Space: object requires documentation | |
| 812 | 812 |
Device &1 reg. &2 period &3 - &4: operating volume cannot be determined | Space: object requires documentation | |
| 813 | 813 |
Device &1 reg. &2 period &3 - &4: error in register relationship | Space: object requires documentation | |
| 814 | 814 |
Device &1 reg. &2 period &3 - &4: vol. corr. factor cannot be determined | Space: object requires documentation | |
| 815 | 815 |
Device &1 reg. &2 period &3 - &4: error in register relationship | Space: object requires documentation | |
| 816 | 816 |
Dev. &1 reg. &2 per. &3 - &4: VCF to be transferred cannot be determined | Space: object requires documentation | |
| 817 | 817 |
Weighting key &1 division cat. &2: energy feeding table incomplete | Space: object requires documentation | |
| 818 | 818 |
Enter gas pressure correction only for gas pressure determination | Space: object requires documentation | |
| 819 | 819 |
Initialization of controls in rate steps started on &1 at &2 | Space: object requires documentation | |
| 820 | 820 |
No gas pressure area found for period &1 - &2 | Space: object requires documentation | |
| 821 | 821 |
Not possisble to determine gas pressure area for period &1 - &2 | Space: object requires documentation | |
| 822 | 822 |
Not possible to determine gas correction pressure for period &1 - &2 | Space: object requires documentation | |
| 823 | 823 |
Gas pressure area &1: no entries in table &2 | Space: object requires documentation | |
| 824 | 824 |
Gas pressure cannot be determined for period &1 - &2 | Space: object requires documentation | |
| 825 | 825 |
Only gas pr. correctn can be maintained for GPr. determ. using GPr. area | Space: object requires documentation | |
| 826 | 826 |
Gas proced. &1 VCF proced. &2: gas pressure area missing | Space: object requires documentation | |
| 827 | 827 |
Gas proced. &1 VCF proced. &2: gas correction pressure is zero | Space: object requires documentation | |
| 828 | 828 |
Only enter weighting key if you have set the conversion factor indicator | Space: object requires documentation | |
| 829 | 829 |
Weighting key &1 weighting procedure &2 not permissible | Space: object requires documentation | |
| 830 | 830 |
Specify a rate type that results in the same meter reading group | Space: object requires documentation | |
| 831 | 831 |
Specify a rate type that results in the same validation class | Space: object requires documentation | |
| 832 | 832 |
Specify a rate type that results in the same minimum portion | Space: object requires documentation | |
| 833 | 833 |
Specify a rate type that results in the same reference value | Space: object requires documentation | |
| 834 | 834 |
Execute contract account billing prior to invoicing simulation | Space: object requires documentation | |
| 835 | 835 |
No billing documents found for company code &1 | Space: object requires documentation | |
| 836 | 836 |
No billing documents found for division &1 | Space: object requires documentation | |
| 837 | 837 |
No billing documents found for portion &1 | Space: object requires documentation | |
| 838 | 838 |
Only time basis 1, 2, 3, 4, 6, and 12 permissible for time category &1 | Space: object requires documentation | |
| 839 | 839 |
Manual billing &1 cannot be reversed | Space: object requires documentation | |
| 840 | 840 |
Enter standard pressure | Space: object requires documentation | |
| 841 | 841 |
No document found for &1 &2 | Space: object requires documentation | |
| 842 | 842 |
Amount operand &1 has no weighting key | Space: object requires documentation | |
| 843 | 843 |
Internal: Change to time category not allowed | Space: object requires documentation | |
| 844 | 844 |
Internal: Change of weighting key not allowed | Space: object requires documentation | |
| 845 | 845 |
Internal: Time cat. &1, func. mod. &2, include &3, routine &4 unknown | Space: object requires documentation | |
| 846 | 846 |
Maintain interval specifications only for price block adjustment | Space: object requires documentation | |
| 847 | 847 |
Enter the number of days as a whole number | Space: object requires documentation | |
| 848 | 848 |
Lower limit of interval &1 must be <= upper limit of interval &2 | Space: object requires documentation | |
| 849 | 849 |
Specify time category for price block adjustment | Space: object requires documentation | |
| 850 | 850 |
Specify time basis for price block adjustment | Space: object requires documentation | |
| 851 | 851 |
Lower limit of interval &1 must be <= time basis of &2 days | Space: object requires documentation | |
| 852 | 852 |
Upper limit of interval &1 must be >= time basis of &2 days | Space: object requires documentation | |
| 853 | 853 |
Weight. key &1 temp. area &2 period &3 - &4: entire weight is zero | Space: object requires documentation | |
| 854 | 854 |
Weighting key &1 temp. area &2 period &3 - &4: denominator is zero | Space: object requires documentation | |
| 855 | 855 |
Device &1 reg. &2 period &3 - &4: conversion factor cannot be determined | Space: object requires documentation | |
| 856 | 856 |
Update to deletion variant: overwriting of values is not permitted | Space: object requires documentation | |
| 857 | 857 |
Device &1 reg. &2 period &3 - &4: no conversion factor due to gas date | Space: object requires documentation | |
| 858 | 858 |
Enter replacement VCF procedure for register relationship ZZ only | Space: object requires documentation | |
| 859 | 859 |
Replacement vol. corr. factor proc. is required for reg. relationship ZZ | Space: object requires documentation | |
| 860 | 860 |
Volume correction factor procedure &1 not permiss. as replacement proc. | Space: object requires documentation | |
| 861 | 861 |
Specify a valid key date | Space: object requires documentation | |
| 862 | 862 |
Not permitted to use only presorting keys with no subtotal | Space: object requires documentation | |
| 863 | 863 |
Price key name cannot contain the special characters * and , | Space: object requires documentation | |
| 864 | 864 |
Price level name cannot contain the special characters * and , | Space: object requires documentation | |
| 865 | 865 |
Not possible to enter a rate type for registers from category &1 | Space: object requires documentation | |
| 866 | 866 |
No rate category found in table &1 for date &2 | Space: object requires documentation | |
| 867 | 867 |
Price class cannot contain the special characters * and , | Space: object requires documentation | |
| 868 | 868 |
Entry must be made for price class | Space: object requires documentation | |
| 869 | 869 |
Entry must be made for price level | Space: object requires documentation | |
| 870 | 870 |
Not possible to convert unit of measurement &1 to &2 | Space: object requires documentation | |
| 871 | 871 |
Error involving device &1 register &2: | Space: object requires documentation | |
| 872 | 872 |
No energy feeding volume found in month &1 - &2 for cal. val. district &3 | Space: object requires documentation | |
| 873 | 873 |
No energy feeding volume found for calorific value district &2 from &1 | Space: object requires documentation | |
| 874 | 874 |
IF-ELSE-ENDIF clause contains different seasons | Space: object requires documentation | |
| 875 | 875 |
Transfer tables for function module &1 are blank | Space: object requires documentation | |
| 876 | 876 |
Parameter &V1& in function module &V2& is missing | Space: object requires documentation | |
| 877 | 877 |
Discount cannot contain special characters * and , | Space: object requires documentation | |
| 878 | 878 |
Operand &1 season &2 valid from &3 valid to &4: possible to overwrite | Space: object requires documentation | |
| 879 | 879 |
Field &1 is not filled | Space: object requires documentation | |
| 880 | 880 |
Table &1 is empty | Space: object requires documentation | |
| 881 | 881 |
Automation data already transferred for operand &1 (season &2) | Space: object requires documentation | |
| 882 | 882 |
Variant &1 requires &2 input operands and &3 output operands | Space: object requires documentation | |
| 883 | 883 |
Fields &1 and &2 are not filled | Space: object requires documentation | |
| 884 | 884 |
"Adjust price blocks" is set, but weighting key is missing in operand | Space: object requires documentation | |
| 885 | 885 |
Invoic. simulation completed; branched directly to print document display | Space: object requires documentation | |
| 886 | 886 |
Not possible to convert unit of measurement &1 to &2 | Space: object requires documentation | |
| 887 | 887 |
Device &1 register &2: not possible to convert &3 to &4 | Space: object requires documentation | |
| 888 | 888 |
Enter indicator in the case of an irregular posting | Space: object requires documentation | |
| 889 | 889 |
Numerical value required for the time basis | Space: object requires documentation | |
| 890 | 890 |
The deletion logic of price summary indicator &1 is not consistent | Space: object requires documentation | |
| 891 | 891 |
Line item type missing for variant &1 in step &2 | Space: object requires documentation | |
| 892 | 892 |
Enter a transaction currency | Space: object requires documentation | |
| 893 | 893 |
Reference value &1 does not have reference value type &4 | Space: object requires documentation | |
| 894 | 894 |
Not permissible to enter season for variant &1 | Space: object requires documentation | |
| 895 | 895 |
Enter a gas procedure | Space: object requires documentation | |
| 896 | 896 |
Price does not exist in currency &1 | Space: object requires documentation | |
| 897 | 897 |
Billing document &1 with origin &2 cannot be reversed | Space: object requires documentation | |
| 898 | 898 |
Document &1 cannot be reversed (migration) | Space: object requires documentation | |
| 899 | 899 |
Billing document &1 can only be reversed for adjustment (migration) | Space: object requires documentation | |
| 900 | 900 |
Franchise contract &1 not valid in specified period | Space: object requires documentation | |
| 901 | 901 |
You cannot manually maintain operand &1 | Space: object requires documentation | |
| 902 | 902 |
Intervals must not overlap | Space: object requires documentation | |
| 903 | 903 |
No rates maintained in table TE224 | Space: object requires documentation | |
| 904 | 904 |
Intervals Consistent | Space: object requires documentation | |
| 905 | 905 |
No operands maintained in table TE228 | Space: object requires documentation | |
| 906 | 906 |
Use at least one selection | Space: object requires documentation | |
| 907 | 907 |
Enter a consecutive number | The short text describes the object sufficiently | |
| 908 | 908 |
Simulation period not completely covered by price/operand &1 | Space: object requires documentation | |
| 909 | 909 |
Only the 'normal price' price type is permitted | The short text describes the object sufficiently | |
| 910 | 910 |
Prices from different time categories are allocated to operand &1 | Space: object requires documentation | |
| 911 | 911 |
Time base of prices must correspond during update | Space: object requires documentation | |
| 912 | 912 |
No quantity type is defined in table &1 | The short text describes the object sufficiently | |
| 913 | 913 |
A document with end date &2 already exists for contract &1 | Space: object requires documentation | |
| 914 | 914 |
&1 billing documents were generated | Space: object requires documentation | |
| 915 | 915 |
Quantity for operand update is too high | Space: object requires documentation | |
| 916 | 918 |
Price does not exist as of &1, but as of &2 | Space: object requires documentation | |
| 917 | 999 |
Rate category &1 does not exist | The short text describes the object sufficiently |
History
| Last changed on/by | |
20110810 | SAP |
| SAP Release Created in |
