SAP ABAP Message Class AJ (Billing program)
Basic Data
Hierarchy
☛
IS-UT (Software Component) SAP Utilities/Telecommunication
⤷
IS-U-BI (Application Component) Contract Billing
⤷
EE20 (Package) IS-U: Billing
IS-UT (Software Component) SAP Utilities/Telecommunication⤷
IS-U-BI (Application Component) Contract Billing⤷
EE20 (Package) IS-U: Billing 
Attributes
| Message class |  |
AJ |
| Short Description |  |
Billing program |
| Changed On |  |
20110810 |
| Last Changed At |  |
143619 |
Messages
| # | Message | Message Short Text | Documentation status | Authorization check |
|---|---|---|---|---|
| 1 |  001 |
No billing orders exist for contract &1 | Space: object requires documentation | |
| 2 | 002 |
For contract &1 there is at least one bill. order to be processed first | Space: object requires documentation | |
| 3 | 003 |
Billing of contract &1 canceled | ||
| 4 | 004 |
Billing of contract &1 successfully completed | ||
| 5 | 005 |
Internal: invalid access control &1 for operand &2 | Space: object requires documentation | |
| 6 | 006 |
Contract is only valid for the period &3 - &4 | Space: object requires documentation | |
| 7 | 007 |
Select one permissibility only | Space: object requires documentation | |
| 8 | 008 |
The division category &1 is not permitted | Space: object requires documentation | |
| 9 | 009 |
No rate found for rate type &1 and rate category &2 | ||
| 10 | 010 |
Internal: error in function module &1 | Space: object requires documentation | |
| 11 | 011 |
Contract &1 is not billable | ||
| 12 | 012 |
No season period was defined for season &1 | ||
| 13 | 013 |
No operand values were found for operand &1 | ||
| 14 | 014 |
An optional schema step was only assigned values for part of the period | ||
| 15 | 015 |
Different rate fact groups were found for rate &1 | ||
| 16 | 016 |
Rate &1 is not in schema &2 | ||
| 17 | 017 |
Schema &1 has been blocked for billing since &2 | ||
| 18 | 018 |
Billing transaction &1 is not permitted here | ||
| 19 | 019 |
Invalid value in control; value: &1 | Space: object requires documentation | |
| 20 | 020 |
Division cannot be carried out; divisor is zero | Space: object requires documentation | |
| 21 | 021 |
Output operand of variant can only be updated once | ||
| 22 | 022 |
Negative differences are not permitted | ||
| 23 | 023 |
Error in IF-ELSE-ENDIF nesting: ELSE variant without previous IF | Space: object requires documentation | |
| 24 | 024 |
Error in IF-ELSE-ENDIF nesting: missing ENDIF variant | Space: object requires documentation | |
| 25 | 025 |
Error in IF-ELSE-ENDIF nesting: too many ENDIF variants | Space: object requires documentation | |
| 26 | 026 |
Internal error in form &1 (function module &2) | Space: object requires documentation | |
| 27 | 027 |
No billing orders exist for installation &1 | Space: object requires documentation | |
| 28 | 028 |
Installation &1: no installation time slices were found | Space: object requires documentation | |
| 29 | 029 |
No unit of measurement for meter reading exists | ||
| 30 | 030 |
No unit of measurement for billing exists | ||
| 31 | 031 |
System expects &1 line item types; actual number: &2 | Space: object requires documentation | |
| 32 | 032 |
System expects &1 controls; actual number: &2 | Space: object requires documentation | |
| 33 | 033 |
Maximum sort field permitted: &1; actual maximum: &2 | Space: object requires documentation | |
| 34 | 034 |
Unknown time category &1 in variable &2 | Space: object requires documentation | |
| 35 | 035 |
Discount type &1 for discount &2 is not permitted in the variant | Space: object requires documentation | |
| 36 | 036 |
Reference base &1 for discount &2 is not permitted in the variant | Space: object requires documentation | |
| 37 | 037 |
Simulation carried out for contract &1 | ||
| 38 | 038 |
Simulation canceled for contract &1 | ||
| 39 | 039 |
Budget billing simulation carried out for contract &1 | ||
| 40 | 040 |
Start of billing______: date: &1; time: &2 | Space: object requires documentation | |
| 41 | 041 |
End of billing________: date: &1; time: &2 | Space: object requires documentation | |
| 42 | 042 |
Simulation canceled for installation &1 | ||
| 43 | 043 |
Simulation carried out for installation &1 | ||
| 44 | 044 |
Billing was executed successfully for installation &1 | ||
| 45 | 045 |
Billing was terminated for installation &1 | ||
| 46 | 046 |
Budget billing simulation canceled for contract &1 | ||
| 47 | 047 |
Budget billing simulation canceled for installation &1 | ||
| 48 | 048 |
Budget billing simulation carried out for installation &1 | ||
| 49 | 049 |
Contract &1 is not billable | Space: object requires documentation | |
| 50 | 050 |
Contract &1 is billable | Space: object requires documentation | |
| 51 | 051 |
Installation &1 is not billable | Space: object requires documentation | |
| 52 | 052 |
Installation &1 is billable | Space: object requires documentation | |
| 53 | 053 |
Table &1 in program &2 must be empty | ||
| 54 | 054 |
Internal: all proration reasons are already filled in table ITERM | Space: object requires documentation | |
| 55 | 055 |
No rate was found for the period &1 to &2 | Space: object requires documentation | |
| 56 | 056 |
Not possible to update operand &1 to the installation facts | ||
| 57 | 057 |
Error updating operand &1 in the installation facts | ||
| 58 | 058 |
Simulation of contract &1 completed with document number &2 | ||
| 59 | 059 |
No values found for price &1 | Space: object requires documentation | |
| 60 | 060 |
Error updating operand &1 in the installation facts | ||
| 61 | 061 |
Document &1 reversed | ||
| 62 | 062 |
All documents have been reversed | Space: object requires documentation | |
| 63 | 063 |
Contract &1 is blocked for billing, billing block reason &2 | Space: object requires documentation | |
| 64 | 064 |
Field &1 is empty | Space: object requires documentation | |
| 65 | 065 |
Error updating operand &1 in the installation facts | ||
| 66 | 066 |
* | ||
| 67 | 067 |
Do not process demand from facts next to demand from registers | Space: object requires documentation | |
| 68 | 068 |
Internal: this type of budget billing amt extrapolation is not possible | Space: object requires documentation | |
| 69 | 069 |
Price &1 has incorrect franchise fee category | Space: object requires documentation | |
| 70 | 070 |
No price key was found for price operand &1 | Space: object requires documentation | |
| 71 | 071 |
Price &4 is not an average price | Space: object requires documentation | |
| 72 | 072 |
The type of backbilling was changed | Space: object requires documentation | |
| 73 | 073 |
The type of period-end billing was changed | Space: object requires documentation | |
| 74 | 074 |
The length of the backbilling period has changed | Space: object requires documentation | |
| 75 | 075 |
The length of the period-end billing period has changed | Space: object requires documentation | |
| 76 | 076 |
Operand &1 has invalid value &2 | Space: object requires documentation | |
| 77 | 077 |
Period-end bill. order w. sched. billing date &2 created for contract &1 | Space: object requires documentation | |
| 78 | 078 |
No price amounts for currency &2 were found for price &1 | Space: object requires documentation | |
| 79 | 079 |
Amount for operand &v1& has incorrect currency | Space: object requires documentation | |
| 80 | 080 |
Outsorting has already been released | Space: object requires documentation | |
| 81 | 081 |
Document has already been reversed | Space: object requires documentation | |
| 82 | 082 |
Register discount not possible | Space: object requires documentation | |
| 83 | 083 |
Register discount &1 has incorrect reference base | Space: object requires documentation | |
| 84 | 084 |
No discount amounts for currency &2 were found for discount &1 | Space: object requires documentation | |
| 85 | 085 |
Amount for operand &1 cannot be converted | Space: object requires documentation | |
| 86 | 086 |
Not possible to update operand &1 to the installation facts | Space: object requires documentation | |
| 87 | 087 |
Contract &1 is blocked from automatic billing | Space: object requires documentation | |
| 88 | 088 |
Specify a date starting from &1 as the check date | Space: object requires documentation | |
| 89 | 089 |
Specify a date starting from &1 as the extrapolation date | Space: object requires documentation | |
| 90 | 090 |
Specify a valid simulation period | Space: object requires documentation | |
| 91 | 091 |
Billing order for &1 cannot be processed | Space: object requires documentation | |
| 92 | 092 |
Price &1 has incorrect unit of measurement | Space: object requires documentation | |
| 93 | 093 |
Discount &1 has incorrect unit of measurement | Space: object requires documentation | |
| 94 | 094 |
No values found for discount &1 | Space: object requires documentation | |
| 95 | 095 |
Contract &1 is not allocated to an installation | Space: object requires documentation | |
| 96 | 096 |
Division &1 is not permitted for billing objects | Space: object requires documentation | |
| 97 | 097 |
Unexpected termination in variant &1 in schema &2 | Space: object requires documentation | |
| 98 | 098 |
Billing document &1 for contract &2 has been outsorted | Space: object requires documentation | |
| 99 | 099 |
No valid budget billing period has been determined | Space: object requires documentation | |
| 100 | 100 |
Operand &1 is season-based, but no season has been defined | Space: object requires documentation | |
| 101 | 101 |
The number of demand peaks for operand &1 is zero | Space: object requires documentation | |
| 102 | 102 |
Period-end billing cannot be executed yet | Space: object requires documentation | |
| 103 | 103 |
Portion has been changed within the backbilling period | Space: object requires documentation | |
| 104 | 104 |
Meter reading unit has been changed within the backbilling period | Space: object requires documentation | |
| 105 | 105 |
Portion has been changed within the period-end billing period | Space: object requires documentation | |
| 106 | 106 |
Meter reading unit has been changed within the period-end billing period | Space: object requires documentation | |
| 107 | 107 |
Periodic billing cannot be performed yet | Space: object requires documentation | |
| 108 | 108 |
Interim billing is not permitted within the backbilling period | Space: object requires documentation | |
| 109 | 109 |
Interim billing is not permitted within the period-end billing period | Space: object requires documentation | |
| 110 | 110 |
Execute period-end billing first | Space: object requires documentation | |
| 111 | 111 |
Period-end billing order is missing | Space: object requires documentation | |
| 112 | 112 |
Schema contains no period-end billing rate | Space: object requires documentation | |
| 113 | 113 |
Not permissible to change rate category in period-end billing period | Space: object requires documentation | |
| 114 | 114 |
Not permissible to change rate category in backbilling period | Space: object requires documentation | |
| 115 | 115 |
Not permissible to change rate category in period-end billing period | Space: object requires documentation | |
| 116 | 116 |
Number of contracts billed____________________: &1 | Space: object requires documentation | |
| 117 | 117 |
Number of contracts simulated_________________: &1 | Space: object requires documentation | |
| 118 | 118 |
Number of incorrect contracts_________________: &1 | Space: object requires documentation | |
| 119 | 119 |
Start of overall chk: date: &1; time: &2 | Space: object requires documentation | |
| 120 | 120 |
End of overall check: date: &1; time: &2 | Space: object requires documentation | |
| 121 | 121 |
Total number of contracts selected____________: &1 | Space: object requires documentation | |
| 122 | 122 |
Number of overall checks performed____________: &1 | Space: object requires documentation | |
| 123 | 123 |
Total number of contracts processed___________: &1 | Space: object requires documentation | |
| 124 | 124 |
Budget billing amount extrapolation cannot be performed | Space: object requires documentation | |
| 125 | 125 |
Simulation cannot be performed due to backbilling or final billing | Space: object requires documentation | |
| 126 | 126 |
Season definition for season &1 is not unique | Space: object requires documentation | |
| 127 | 127 |
Not possible to update operand &1 of the operand category &2 | Space: object requires documentation | |
| 128 | 128 |
Billing document was placed in the spool | Space: object requires documentation | |
| 129 | 129 |
Simulation performed for contract account &1 | Space: object requires documentation | |
| 130 | 130 |
Billing executed for contract account &1 | Space: object requires documentation | |
| 131 | 131 |
Simulation of contract account &1 terminated | Space: object requires documentation | |
| 132 | 132 |
Billing of contract account &1 terminated | Space: object requires documentation | |
| 133 | 133 |
Contract account &1 can be billed | Space: object requires documentation | |
| 134 | 134 |
Contract account &1 cannot be billed | Space: object requires documentation | |
| 135 | 135 |
Operand &1 requires a weighting key | Space: object requires documentation | |
| 136 | 136 |
Outsorting has already been released | Space: object requires documentation | |
| 137 | 137 |
Document has already been released | Space: object requires documentation | |
| 138 | 138 |
Control document &1 was deleted; invoicing document &2 was posted | Space: object requires documentation | |
| 139 | 139 |
Billing document &1 released | Space: object requires documentation | |
| 140 | 140 |
Outsorting &1 of invoicing document &2 has been released | Space: object requires documentation | |
| 141 | 141 |
Outsorting &1 of billing document &2 has been released | Space: object requires documentation | |
| 142 | 142 |
Variant &1 terminated because condition was (not) met | Space: object requires documentation | |
| 143 | 143 |
Operand &1 has value zero; block adjustment not possible | Space: object requires documentation | |
| 144 | 144 |
Manual billing of contract &1 terminated | Space: object requires documentation | |
| 145 | 145 |
Value &1 is too high for multiplying it with price block of price &2 | Space: object requires documentation | |
| 146 | 146 |
Billing order for method UtilBillingDocAuto.Create is missing | Space: object requires documentation | |
| 147 | 147 |
Enter selection criteria | Space: object requires documentation | |
| 148 | 148 |
Enter a reconciliation key | Space: object requires documentation | |
| 149 | 149 |
Last processed contract_______________________: &1 | Space: object requires documentation | |
| 150 | 150 |
Not possible to update an average price for price &1 | Space: object requires documentation | |
| 151 | 151 |
Not possible to update operand &1 to the installation facts | Space: object requires documentation | |
| 152 | 152 |
Number of incorrect contracts per division____: &2 division &1 | Space: object requires documentation | |
| 153 | 153 |
No. of incorrect contracts for other divisions: &1 | Space: object requires documentation | |
| 154 | 154 |
Not possible to delete line items in the case of price summary &1 | Space: object requires documentation | |
| 155 | 155 |
Burning hours for operation mode &1 not maintained from &2 to &3 | Space: object requires documentation | |
| 156 | 156 |
No previous document could be found for contract &1 | Space: object requires documentation | |
| 157 | 157 |
Previous document for contract &1 could not be read | Space: object requires documentation | |
| 158 | 158 |
Period-end billing document could not be read for contract &1 | Space: object requires documentation | |
| 159 | 159 |
No period-end billing document could be determined for contract &1 | Space: object requires documentation | |
| 160 | 160 |
No documents for period-end billing period found for contract &1 | Space: object requires documentation | |
| 161 | 161 |
No backbilling period documents found for contract &1 | Space: object requires documentation | |
| 162 | 162 |
No operation modes maintained for lighting unit &1 | Space: object requires documentation | |
| 163 | 163 |
Key date is required for access control &1 | Space: object requires documentation | |
| 164 | 164 |
Operation mode &1 is already allocated (entry no. &2) | Space: object requires documentation | |
| 165 | 165 |
Enter a value for operation mode &1 | Space: object requires documentation | |
| 166 | 166 |
Specify a key date for period control &1 | Space: object requires documentation | |
| 167 | 167 |
Quantity bases for price &1 and price &2 do not match | Space: object requires documentation | |
| 168 | 168 |
Only standard prices can be processed | Space: object requires documentation | |
| 169 | 169 |
Billing run number__: &1 | Space: object requires documentation | |
| 170 | 170 |
Operand &1 is used twice in deletion variants | Space: object requires documentation | |
| 171 | 171 |
Deletion operand &1 in step &2 is inconsistent | Space: object requires documentation | |
| 172 | 172 |
Operand &1 is not used as a deletion operand | Space: object requires documentation | |
| 173 | 173 |
Deletion variant with inconsistent time slice | Space: object requires documentation | |
| 174 | 174 |
Deletion operand &3 in schema &1 is inconsistent | Space: object requires documentation | |
| 175 | 175 |
Portion &1 was simulated successfully | Space: object requires documentation | |
| 176 | 176 |
Portion &1 was billed successfully | Space: object requires documentation | |
| 177 | 177 |
Simulation of portion &1 was terminated | Space: object requires documentation | |
| 178 | 178 |
Billing of portion &1 was terminated | Space: object requires documentation | |
| 179 | 179 |
Processing of contract &1 was terminated | Space: object requires documentation | |
| 180 | 180 |
Output operand &1 in step &2 does not correspond to deletion operand &3 | Space: object requires documentation | |
| 181 | 181 |
Error during release; check the log | Space: object requires documentation | |
| 182 | 182 |
Calorific value procedure &1 does not exist | Space: object requires documentation | |
| 183 | 183 |
Cal. value maintenance not permitted for CV procedure &1 time ref. CV &2 | Space: object requires documentation | |
| 184 | 184 |
Only arithmetic average is possible for daily temperature values | Space: object requires documentation | |
| 185 | 185 |
Only possible to calculate average using billing period | Space: object requires documentation | |
| 186 | 186 |
Weighting key &1 not permissible with weighting procedure &2 | Space: object requires documentation | |
| 187 | 187 |
&2 of &1 checked rates are inconsistent | Space: object requires documentation | |
| 188 | 188 |
Create operand values for operand &1 (season &2) | Space: object requires documentation | |
| 189 | 189 |
Processing was terminated | Space: object requires documentation | |
| 190 | 190 |
Rate determination for rate type &1 and rate category &2 inconsistent | Space: object requires documentation | |
| 191 | 191 |
Enter a rate type and a rate category | Space: object requires documentation | |
| 192 | 192 |
A rate determination does not exist for rate type &1 and rate category &2 | Space: object requires documentation | |
| 193 | 193 |
A rate determination already exists for rate type &1 and rate category &2 | Space: object requires documentation | |
| 194 | 194 |
Device &1 register &2 period &3-&4: calorific value district missing | Space: object requires documentation | |
| 195 | 195 |
Device &1 reg. &2 period &3-&4: compressibility via user exit incorrect | Space: object requires documentation | |
| 196 | 196 |
Device &1 reg. &2 period &3-&4: compressibility from user exit missing | Space: object requires documentation | |
| 197 | 197 |
Dev. &1 reg. &2 per. &3-&4: incor. from-date in comp.table from user exit | Space: object requires documentation | |
| 198 | 198 |
Dev. &1 reg. &2 per. &3-&4: incor. to-date in compr. table from user exit | Space: object requires documentation | |
| 199 | 199 |
Device &1 reg. &2 per. &3-&4: compress. table from user exit inconsistent | Space: object requires documentation | |
| 200 | 200 |
At least two operands are required to check units of measurement | Space: object requires documentation | |
| 201 | 201 |
Device &1 reg. &2 per. &3-&4: compress. table from user exit implausible | Space: object requires documentation | |
| 202 | 202 |
Device &1 reg. &2 per. &3-&4: compress. table from user exit unclear | Space: object requires documentation | |
| 203 | 203 |
Rate type &1 and rate category &2 belong to different divisions | Space: object requires documentation | |
| 204 | 204 |
Rate type &1 and rate category &2 belong to different billing classes | Space: object requires documentation | |
| 205 | 205 |
Rate &1 has division &2; rate category &3 has division &4 | Space: object requires documentation | |
| 206 | 206 |
Rate &1 has billing class &2; rate category &3 has billing class &4 | Space: object requires documentation | |
| 207 | 207 |
Rate &1 is not contained in schema &2 | Space: object requires documentation | |
| 208 | 208 |
Calorific value district &1 date &2: no entry in V_TE450 | Space: object requires documentation | |
| 209 | 209 |
Franchise contract &1 not valid in specified period | Space: object requires documentation | |
| 210 | 210 |
Enter a from-date | Space: object requires documentation | |
| 211 | 211 |
Enter a to-date | Space: object requires documentation | |
| 212 | 212 |
Enter a to-date that is after or on the from-date | Space: object requires documentation | |
| 213 | 213 |
Enter at least one rate | Space: object requires documentation | |
| 214 | 214 |
Schema &1 does not contain rate &2 | Space: object requires documentation | |
| 215 | 215 |
Lock problem occurred during rate determination | Space: object requires documentation | |
| 216 | 216 |
Calorific value district &1: no daily calorific values exist | Space: object requires documentation | |
| 217 | 217 |
Changes were transferred | Space: object requires documentation | |
| 218 | 218 |
Calorific value district &1 <,= date &2: cal. values for billing missing | Space: object requires documentation | |
| 219 | 219 |
You have already entered rate &1 | Space: object requires documentation | |
| 220 | 220 |
Incorrect combination of field entries for base procedure &1 | Space: object requires documentation | |
| 221 | 221 |
Rate &1 permissibility does not correspond to permissibility for &2 | Space: object requires documentation | |
| 222 | 222 |
No register rate is allocated to rate type &1 and rate category &2 | Space: object requires documentation | |
| 223 | 223 |
Device &1 reg. &2 period &3-&4: measured press./air press./temp. missing | Space: object requires documentation | |
| 224 | 224 |
Rate determination created for rate type &1 and rate category &2 | Space: object requires documentation | |
| 225 | 225 |
Rate determination changed for rate type &1 and rate category &2 | Space: object requires documentation | |
| 226 | 226 |
Rate determination deleted for rate type &1 and rate category &2 | Space: object requires documentation | |
| 227 | 227 |
Create a rate determination | Space: object requires documentation | |
| 228 | 228 |
Rate determination is inconsistent | Space: object requires documentation | |
| 229 | 229 |
Rate determination is consistent | Space: object requires documentation | |
| 230 | 230 |
Automation data for rate determination is inconsistent | Space: object requires documentation | |
| 231 | 231 |
Automation data for rate determination is inconsistent | Space: object requires documentation | |
| 232 | 232 |
Automation data for rate determination is inconsistent | Space: object requires documentation | |
| 233 | 233 |
Allow at least one value | Space: object requires documentation | |
| 234 | 234 |
No default values were entered for the deletion operands | Space: object requires documentation | |
| 235 | 235 |
Periods were adjusted | Space: object requires documentation | |
| 236 | 236 |
Not possible to correct gas law deviation factor for GL dev. factor 03 | Space: object requires documentation | |
| 237 | 237 |
Gas law deviation factor 03 is only possible for temp./pressure billing | Space: object requires documentation | |
| 238 | 238 |
Mass run terminated due to customer check | Space: object requires documentation | |
| 239 | 239 |
Value not permissible for a month: &1 | Space: object requires documentation | |
| 240 | 240 |
Error in communication processing | Space: object requires documentation | |
| 241 | 241 |
Device &1 (logical register &2) period &3-&4: error reading P_X_ZW | Space: object requires documentation | |
| 242 | 242 |
Dev. &1 reg. &2 per. &3-&4: no VCF (oper.vol. meter shows zero consumpt.) | Space: object requires documentation | |
| 243 | 243 |
Line item type &1 does not exist | Space: object requires documentation | |
| 244 | 244 |
Different franchise fee groups exist for line item type &1 in the rate | Space: object requires documentation | |
| 245 | 245 |
No franchise fee group exists in the rate for line item type &1 | Space: object requires documentation | |
| 246 | 246 |
No franchise fee group exists in the rate | Space: object requires documentation | |
| 247 | 247 |
No franchise contract in the installation | Space: object requires documentation | |
| 248 | 248 |
Dev. &1 reg. &2 per. &3-&4: no VCF (stnd vol. meter shows zero consumpt.) | Space: object requires documentation | |
| 249 | 249 |
No contribution defined for the franchise contract being used | Space: object requires documentation | |
| 250 | 250 |
Select the corresponding indicator for the exception list | Space: object requires documentation | |
| 251 | 251 |
Reference value was deleted | Space: object requires documentation | |
| 252 | 252 |
Invoicing completed | Space: object requires documentation | |
| 253 | 253 |
Not possible to maintain block adjustment fields for scale prices | Space: object requires documentation | |
| 254 | 254 |
Price update with operand &1: price type does not match | Space: object requires documentation | |
| 255 | 255 |
Price blocks do not match; price update is not possible | Space: object requires documentation | |
| 256 | 256 |
New line items have resulted | Space: object requires documentation | |
| 257 | 257 |
Number of line items were reduced to &1 | Space: object requires documentation | |
| 258 | 258 |
Enter a value that is not season-based for operand &1 | Space: object requires documentation | |
| 259 | 259 |
Enter a value for season &2 for operand &1 | Space: object requires documentation | |
| 260 | 260 |
Meter reading result for device &1 register &2 missing on &3 | Space: object requires documentation | |
| 261 | 261 |
End of check for rate &1 | Space: object requires documentation | |
| 262 | 262 |
Results of the overall check for all rates | Space: object requires documentation | |
| 263 | 263 |
Installation &1 key date &2 not found (access FM &3) | Space: object requires documentation | |
| 264 | 264 |
Installation &1 not found (access FM &2) | Space: object requires documentation | |
| 265 | 265 |
Backbilling period &1: error at start of meter reading result determin. | Space: object requires documentation | |
| 266 | 266 |
Backbilling period &1: error at end of meter reading result determination | Space: object requires documentation | |
| 267 | 267 |
FM &1: earliest from-date in &2 not equal to &3 (internal error) | Space: object requires documentation | |
| 268 | 268 |
FM &1: gap before from-date &2 in &3 (internal error) | Space: object requires documentation | |
| 269 | 269 |
&1-&2 from I_TIMESLICES not in &3-&4 (internal error) | Space: object requires documentation | |
| 270 | 270 |
Most recent to-date &1 from &2 must be &3 (internal error) | Space: object requires documentation | |
| 271 | 271 |
FM &1 import table &2 is empty (internal error) | Space: object requires documentation | |
| 272 | 272 |
Function module &1: error during extrapolation | Space: object requires documentation | |
| 273 | 273 |
Specify a rate type that results in an appropriate unit of measurement | Space: object requires documentation | |
| 274 | 274 |
Internal error translating amount field in outsorting &1 | Space: object requires documentation | |
| 275 | 275 |
Billing document &1 was billed again | Space: object requires documentation | |
| 276 | 276 |
Invoicing documents cannot be billed again | Space: object requires documentation | |
| 277 | 277 |
Released documents cannot be reversed or billed again | Space: object requires documentation | |
| 278 | 278 |
Reversed documents cannot be released or billed again | Space: object requires documentation | |
| 279 | 279 |
Do not use price type "scale price" for price category "flat rate" | Space: object requires documentation | |
| 280 | 280 |
Portion &1 can be billed | Space: object requires documentation | |
| 281 | 281 |
Portion &1 cannot be billed | Space: object requires documentation | |
| 282 | 282 |
Billing was terminated via the UTILIT99 variant | Space: object requires documentation | |
| 283 | 283 |
Simulation of billing order selection was terminated | Space: object requires documentation | |
| 284 | 284 |
Billing order selection can be billed | Space: object requires documentation | |
| 285 | 285 |
Billing order cannot be processed | Space: object requires documentation | |
| 286 | 286 |
Billing of billing selection was terminated | Space: object requires documentation | |
| 287 | 287 |
Billing selection was simulated | Space: object requires documentation | |
| 288 | 288 |
Billing selection was billed | Space: object requires documentation | |
| 289 | 289 |
Billing order selection cannot be billed | Space: object requires documentation | |
| 290 | 290 |
Internal: event &1 for object type &2 cannot be triggered | Space: object requires documentation | |
| 291 | 291 |
Portion &1 was simulated | Space: object requires documentation | |
| 292 | 292 |
Billing order selection was simulated | Space: object requires documentation | |
| 293 | 293 |
Not possible to maintain history for average price without history | Space: object requires documentation | |
| 294 | 294 |
Not possible to maintain a factor here with franchise fee category | Space: object requires documentation | |
| 295 | 295 |
Prices with history require a transaction currency | Space: object requires documentation | |
| 296 | 296 |
Individual contracts for outline contr. &1 did not pass completeness chck | Space: object requires documentation | |
| 297 | 297 |
Results of the mass check for all rate determinations | Space: object requires documentation | |
| 298 | 298 |
End of rate determination check: rate type &1, rate category &2, rate &3 | Space: object requires documentation | |
| 299 | 299 |
&1 rate determinations were checked; of these, &2 are inconsistent | Space: object requires documentation | |
| 300 | 300 |
More than one value was updated for operand &1 | Space: object requires documentation | |
| 301 | 301 |
Rate type &1 does not have a unique permissibility | Space: object requires documentation | |
| 302 | 302 |
No demand values are set to active | Space: object requires documentation | |
| 303 | 303 |
Contract &1 is blocked for billing, billing block reason &2 | Space: object requires documentation | |
| 304 | 304 |
&1 schemas were checked; of these, &2 are inconsistent | Space: object requires documentation | |
| 305 | 305 |
End of check for schema &1 | Space: object requires documentation | |
| 306 | 306 |
Results of the mass check for all billing schemas | Space: object requires documentation | |
| 307 | 307 |
************************************************************************* | Space: object requires documentation | |
| 308 | 308 |
Price can only be saved with historical data | Space: object requires documentation | |
| 309 | 309 |
Specify a date within the period &1 - &2 | Space: object requires documentation | |
| 310 | 310 |
&1 was not found | Space: object requires documentation | |
| 311 | 311 |
Billing was terminated for installation &1 | Space: object requires documentation | |
| 312 | 312 |
Total number of selected installations________: &1 | Space: object requires documentation | |
| 313 | 313 |
Total number of processed installations_______: &1 | Space: object requires documentation | |
| 314 | 314 |
Number of incorrect installations_____________: &1 | Space: object requires documentation | |
| 315 | 315 |
Number of incorrect installations per division: &2, &1 division | Space: object requires documentation | |
| 316 | 316 |
Installation processed last___________________: &1 | Space: object requires documentation | |
| 317 | 317 |
Number of installations billed successfully___: &1 | Space: object requires documentation | |
| 318 | 318 |
Number of incorrect installations per division: &2, &1 division | Space: object requires documentation | |
| 319 | 319 |
Number of installations simulated successfully: &1 | Space: object requires documentation | |
| 320 | 320 |
Operand &1 is not from operand category &2 | Space: object requires documentation | |
| 321 | 321 |
Transfer of facts for installation &1 terminated due to errors | Space: object requires documentation | |
| 322 | 322 |
Not possible to transfer facts for installation &1 | Space: object requires documentation | |
| 323 | 323 |
Not possible to transfer facts to installation &1 | Space: object requires documentation | |
| 324 | 324 |
Device &1 with division &2 does not exist in installation &3 | Space: object requires documentation | |
| 325 | 325 |
Register number &1 does not exist in device &2 | Space: object requires documentation | |
| 326 | 326 |
Error occurred reversing the transfer of facts for installation &v1& | Space: object requires documentation | |
| 327 | 327 |
Document number &1: error in user exit for billing reversal | Space: object requires documentation | |
| 328 | 328 |
Contract &1: no billing documents exist in the period &2 - &3 | Space: object requires documentation | |
| 329 | 329 |
Method &1: error inserting document number &2 for table &3 | Space: object requires documentation | |
| 330 | 330 |
Number of outsorted documents per division____: &2, &1 division | Space: object requires documentation | |
| 331 | 331 |
First contract processed______________________: &1 | Space: object requires documentation | |
| 332 | 332 |
Choose contract or installation | Space: object requires documentation | |
| 333 | 333 |
First installation processed: &1 | Space: object requires documentation | |
| 334 | 334 |
Choose contract, installation, or contract account | Space: object requires documentation | |
| 335 | 335 |
No values were found for operand &1 on &2 | Space: object requires documentation | |
| 336 | 336 |
Installation &1 is not billed with schema &3 on &2 | Space: object requires documentation | |
| 337 | 337 |
Select an input operand | Space: object requires documentation | |
| 338 | 338 |
Document &1: update error in function module &2 | Space: object requires documentation | |
| 339 | 339 |
No discounts exist for line item &1 | Space: object requires documentation | |
| 340 | 340 |
No conversions exist for line item &1 | Space: object requires documentation | |
| 341 | 341 |
Discount &1 has division &2 instead of &3 | Space: object requires documentation | |
| 342 | 342 |
Discount &1 has billing class &2 instead of &3 | Space: object requires documentation | |
| 343 | 343 |
Discount &1 is not valid through &2 | Space: object requires documentation | |
| 344 | 344 |
Choose a shorter billing period | Space: object requires documentation | |
| 345 | 345 |
Operand &1 updates to schema step with fact values | Space: object requires documentation | |
| 346 | 346 |
Implausible overflow for device &1, register &2, from-date &3, to-date &4 | Space: object requires documentation | |
| 347 | 347 |
Proration error | Space: object requires documentation | |
| 348 | 348 |
Error rounding actual meter reading results to the meter reading rounding | Space: object requires documentation | |
| 349 | 349 |
Outsorted billing documents must be released prior to invoicing | Space: object requires documentation | |
| 350 | 350 |
Specify a contract for which backbilling or period-end billing is active | Space: object requires documentation | |
| 351 | 351 |
OUtsorted print documents must be released prior to bill printout | Space: object requires documentation | |
| 352 | 352 |
Device &1 register &2: meter reading document numbers &3/&4 incorrect | Space: object requires documentation | |
| 353 | 353 |
Simulated billing documents were saved | Space: object requires documentation | |
| 354 | 354 |
Rate &1 is not a register rate | Space: object requires documentation | |
| 355 | 355 |
Simulated billing documents were invoiced | Space: object requires documentation | |
| 356 | 356 |
Document no. &1: incorrect call of adjustment reversal for a move-out | Space: object requires documentation | |
| 357 | 357 |
Adjustment reversal not poss. for period-end billing doc. &1 for move-out | Space: object requires documentation | |
| 358 | 358 |
No unit of measurement for billing exists | Space: object requires documentation | |
| 359 | 359 |
Error occurred in quantity conversion regarding number of conversions | Space: object requires documentation | |
| 360 | 360 |
Error occurred in quantity conversion when grouping together time slices | Space: object requires documentation | |
| 361 | 361 |
Unknown register category &1 include &2 routine &3 in quantity conversion | Space: object requires documentation | |
| 362 | 362 |
Not possible to balance rounding in quantity conversion | Space: object requires documentation | |
| 363 | 363 |
No entry in &4 for logical register &1 from &2 to &3 | Space: object requires documentation | |
| 364 | 364 |
Device &1 register &2 operand &3 date &4 | Space: object requires documentation | |
| 365 | 365 |
Not permissible to change billing rounding from &1 to &2 | Space: object requires documentation | |
| 366 | 366 |
Billing document &1 cannot be reversed after a period of &2 &3 | Space: object requires documentation | |
| 367 | 367 |
Bill. doc. &1 end of bill. period &2 cannot be reversed due to archiving | Space: object requires documentation | |
| 368 | 368 |
Document to be reversed (&1) cannot be found in file &2 | Space: object requires documentation | |
| 369 | 369 |
Billing document &1 is in archiving index &2 | Space: object requires documentation | |
| 370 | 370 |
Document &1 is already in archiving index | Space: object requires documentation | |
| 371 | 371 |
Previous document &1 for document &2 is in archiving index | Space: object requires documentation | |
| 372 | 372 |
Previous document &1 for billing document &2 cannot be determined | Space: object requires documentation | |
| 373 | 373 |
"Temperature extra" indic. only poss. for thermal gas billing 01 and 02 | Space: object requires documentation | |
| 374 | 374 |
"Pressure extra" indicator only possible for thermal gas billing 02 | Space: object requires documentation | |
| 375 | 375 |
Curreny &1 is not a currency of the European Monetary Union | Space: object requires documentation | |
| 376 | 376 |
Maintain the statistics groups in step &1 | Space: object requires documentation | |
| 377 | 377 |
Can only choose "Temp. extra" with "Press. extra" (for ther. gas bill.02) | Space: object requires documentation | |
| 378 | 378 |
&4 &1 is inconsistent: entry missing in table &2 | Space: object requires documentation | |
| 379 | 379 |
Statistics group &1 is inconsistent: field &2 is not permissible | Space: object requires documentation | |
| 380 | 380 |
&4 &1 is inconsistent: field &2 is not permissible | Space: object requires documentation | |
| 381 | 381 |
&1 &2 is inconsistent: value &3 not permitted for field &4 | Space: object requires documentation | |
| 382 | 382 |
&1 &2 has no update rules for Profitability Analysis | Space: object requires documentation | |
| 383 | 383 |
&1 &2 has no update rules for UIS | Space: object requires documentation | |
| 384 | 384 |
Level of operand group &1 is inconsistent | Space: object requires documentation | |
| 385 | 385 |
Group hierarchy for operand group &1 is inconsistent | Space: object requires documentation | |
| 386 | 386 |
Operand group &1 contains itself as upper-level group | Space: object requires documentation | |
| 387 | 387 |
Upper-level group &2 for operand group &1 was not found | Space: object requires documentation | |
| 388 | 388 |
Operand &1 cannot be deleted | Space: object requires documentation | |
| 389 | 389 |
Update not possible for operand &1 | Space: object requires documentation | |
| 390 | 390 |
No device or register exists that is subject to a rental price | Space: object requires documentation | |
| 391 | 391 |
Internal: error adjusting installation facts | Space: object requires documentation | |
| 392 | 392 |
Internal: error occurred balancing rounding errors | Space: object requires documentation | |
| 393 | 393 |
Joule-Thomson indicator cannot be used yet | Space: object requires documentation | |
| 394 | 394 |
Statistics group &1 not permitted for variant &2 | Space: object requires documentation | |
| 395 | 395 |
Billing line item &1 > maximum &2 | Space: object requires documentation | |
| 396 | 396 |
Statistics group &1 does not exist | Space: object requires documentation | |
| 397 | 397 |
Statistics group &1 not permitted for variant &2 | Space: object requires documentation | |
| 398 | 398 |
Enter a value in the "Type of qty" field | Space: object requires documentation | |
| 399 | 399 |
Quantity type only for variants that write posting-relevant b.line items | Space: object requires documentation | |
| 400 | 400 |
Record &2 not found in the table | Space: object requires documentation | |
| 401 | 401 |
Facts for rate &2 for fact group &1 are inconsistent | Space: object requires documentation | |
| 402 | 402 |
------------------------------------------------------------------------- | Space: object requires documentation | |
| 403 | 403 |
No objects with error messages found | Space: object requires documentation | |
| 404 | 404 |
No objects with warnings found | Space: object requires documentation | |
| 405 | 405 |
Quantity entered for operand &1 is zero | Space: object requires documentation | |
| 406 | 406 |
Division for the new contract is different from the reference | Space: object requires documentation | |
| 407 | 407 |
No meter reading results were found for the billing order | Space: object requires documentation | |
| 408 | 408 |
No default value entered for measured pressure for technical device inst. | Space: object requires documentation | |
| 409 | 409 |
You chose several default value for measured pressure at tech. installat. | Space: object requires documentation | |
| 410 | 410 |
There is exactly one default value for the technical device installation | Space: object requires documentation | |
| 411 | 411 |
Billing document &1 is still being used | Space: object requires documentation | |
| 412 | 412 |
Combination of franchise fee procedure and operand not permitted | Space: object requires documentation | |
| 413 | 413 |
Enter a quantity base | Space: object requires documentation | |
| 414 | 414 |
Select a franchise fee group to copy it | Space: object requires documentation | |
| 415 | 415 |
Enter a currency | Space: object requires documentation | |
| 416 | 416 |
The measured pressure &1 does not exist | Space: object requires documentation | |
| 417 | 417 |
No FF group could be found in the interval from &1 to &2 | Space: object requires documentation | |
| 418 | 418 |
In spec. procedure ZE you cannot enter determ. of GLDF and corr. of GLDF | Space: object requires documentation | |
| 419 | 419 |
Error in determination of GLDF for equipment &1, register &2 | Space: object requires documentation | |
| 420 | 420 |
Franchise fee price limit only permitted in category No franchise fee | Space: object requires documentation | |
| 421 | 421 |
A Customizing transport request was created | Space: object requires documentation | |
| 422 | 422 |
You can find expl. of field contents for radio buttons in the long text | Space: object requires documentation | |
| 423 | 423 |
Program &1 is obsolete and is only used for control purposes | Space: object requires documentation | |
| 424 | 424 |
You are not allowed to enter a time category | Space: object requires documentation | |
| 425 | 425 |
Error transferring to Excel sheet | Space: object requires documentation | |
| 426 | 426 |
First you must reverse the following documents: | Space: object requires documentation | |
| 427 | 427 |
Contract &1, Document &2, end of billing period &3 | Space: object requires documentation | |
| 428 | 428 |
Reverse the billing documents that were created after the &1 billing doc. | Space: object requires documentation | |
| 429 | 429 |
Do not suppress temperature calculation when Joule-Thomson effect is used | Space: object requires documentation | |
| 430 | 430 |
The &1 document entered cannot be found | Space: object requires documentation | |
| 431 | 431 |
The &1 reversal reason is not in the &2 table | Space: object requires documentation | |
| 432 | 432 |
The transport entry for price &1 has been created | Space: object requires documentation | |
| 433 | 433 |
Choose additional temperature calculation to take J-T effect into account | Space: object requires documentation | |
| 434 | 434 |
Choose additional pressure calculation to take J-T effect into account | Space: object requires documentation | |
| 435 | 435 |
Choose GasPr.det. to take J-T effect into account | Space: object requires documentation | |
| 436 | 436 |
Enter a PrTempR-JT key to calculate J-T effect | Space: object requires documentation | |
| 437 | 437 |
Only enter PrTempR-JT key if J-T effect is to be calculated | Space: object requires documentation | |
| 438 | 438 |
The operand group level of the &1 operand group is too high | Space: object requires documentation | |
| 439 | 439 |
No errors found - operand group levels were set | Space: object requires documentation | |
| 440 | 440 |
Missing &1 franchise fee group in franchise contract | Space: object requires documentation | |
| 441 | 441 |
Initial pressure cannot be determined for time period from &1 to &2 | Space: object requires documentation | |
| 442 | 442 |
Errors occured - refer to log | Space: object requires documentation | |
| 443 | 443 |
&1 key is not in &2 table | Space: object requires documentation | |
| 444 | 444 |
&1 key: No values for pressure/temperature drop in &2 table | Space: object requires documentation | |
| 445 | 445 |
Special procedures are not permitted for temperature or pressure extra | Space: object requires documentation | |
| 446 | 446 |
Inconsistency in billing - Contact SAP | Space: object requires documentation | |
| 447 | 447 |
Select at least one currency | Space: object requires documentation | |
| 448 | 448 |
Key press./temp. f. J-T effect &1: no from-date less than or equal to &2 | Space: object requires documentation | |
| 449 | 449 |
It is not possible to combine billing in advance and period-end billing | Space: object requires documentation | |
| 450 | 450 |
Fields not ready for input in &1 schema step, &2 variant are filled | Space: object requires documentation | |
| 451 | 451 |
A valid advance period cannot be determined | Space: object requires documentation | |
| 452 | 452 |
Cannot bill in advance | Space: object requires documentation | |
| 453 | 453 |
Enter a &1 that is not equal to zero | Space: object requires documentation | |
| 454 | 454 |
Enter a validity date | Space: object requires documentation | |
| 455 | 455 |
Enter a key | Space: object requires documentation | |
| 456 | 456 |
Pressure drop for &1 key is zero | Space: object requires documentation | |
| 457 | 457 |
Data may be lost if you use the Joule-thomson Effect | Space: object requires documentation | |
| 458 | 458 |
Data may be lost if you use temperature extra and pressure extra | Space: object requires documentation | |
| 459 | 459 |
Transport of &1 &2 was cancelled | Space: object requires documentation | |
| 460 | 460 |
Gas billing type must match type in reference | Space: object requires documentation | |
| 461 | 461 |
Joule-Thomson effect is only possible with thermal gas billing 00 | Space: object requires documentation | |
| 462 | 462 |
The gas allocation date &2 already exists for the &1 billing document | Space: object requires documentation | |
| 463 | 463 |
Gas allocation date &1 is set | Space: object requires documentation | |
| 464 | 464 |
Enter a meter-reading document number and a gas allocation date | Space: object requires documentation | |
| 465 | 465 |
Specify a rate type for weighting key &1 | Space: object requires documentation | |
| 466 | 466 |
Specify a rate type for billing unit of measure &1 | Space: object requires documentation | |
| 467 | 467 |
Maintain facts for RTP operands at rate level | Space: object requires documentation | |
| 468 | 468 |
The selection was limited to the maximum permitted amount | Space: object requires documentation | |
| 469 | 469 |
The last value does not match the one in the &1 calorific value procedure | Space: object requires documentation | |
| 470 | 470 |
There is no executable schema step | Space: object requires documentation | |
| 471 | 471 |
'Last value' cannot be combined with proration or calculation of average | Space: object requires documentation | |
| 472 | 472 |
'Last value' in CV procedure &3 is unequal to value in VCF procedure &1 | Space: object requires documentation | |
| 473 | 473 |
'Last value' in VCF proc. &1 is unequal to value in cal. val. proc. &2 | Space: object requires documentation | |
| 474 | 474 |
Select a different billing order | Space: object requires documentation | |
| 475 | 475 |
&1 document cannot be reversed for adjustment | Space: object requires documentation | |
| 476 | 476 |
Billing quantities with mixed plus and minus signs is not permitted | Space: object requires documentation | |
| 477 | 477 |
Control of billing in advance is not standard in the IF-ENDIF clause | Space: object requires documentation | |
| 478 | 478 |
&1 deletion operand: Control of billing in advance is not consistent | Space: object requires documentation | |
| 479 | 479 |
&1 container is allocated to &2 location at &3 | Space: object requires documentation | |
| 480 | 480 |
&1 container is allocated to another cont. (&2 installation, &3 operand) | Space: object requires documentation | |
| 481 | 481 |
Enter the missing energy feeding volume for &1 calorific value district | Space: object requires documentation | |
| 482 | 482 |
No entries in &2 table for &1 calorific value district | Space: object requires documentation | |
| 483 | 483 |
Enter a container for &1 installation, &2 operand | Space: object requires documentation | |
| 484 | 484 |
Energy feeding volumes for &1 cal. val. district incompletely maintained | Space: object requires documentation | |
| 485 | 485 |
Energy feeding vols for spec. cal. val. districts completely maintained | Space: object requires documentation | |
| 486 | 486 |
&1 is not permitted as control for advance billing in &2 step | Space: object requires documentation | |
| 487 | 487 |
If you want to transport &1 manually, please read the long text | Space: object requires documentation | |
| 488 | 488 |
Rate determination for rate type &1 of rate category &2 does not exist | Space: object requires documentation | |
| 489 | 489 |
You do not have authorization to display &1 contract with &2 auth. group | Space: object requires documentation | |
| 490 | 490 |
Error in user exit for calorific value altitude test | Space: object requires documentation | |
| 491 | 491 |
You Cannot Select Info Lines in Case of Back Billing in Step &1 | Space: object requires documentation | |
| 492 | 492 |
Specify the number of output parameters for RTP interface &1 | Space: object requires documentation | |
| 493 | 493 |
Select an output parameter for operand category &1 | Space: object requires documentation | |
| 494 | 494 |
Address data for &1 premise could not be found | Space: object requires documentation | |
| 495 | 495 |
Register operand &1 exists several times in rate step &2 | Space: object requires documentation | |
| 496 | 496 |
Profile value is missing for profile &1, date &2, time&3 | Space: object requires documentation | |
| 497 | 497 |
&4 is zero in device &1, register &2 | Space: object requires documentation | |
| 498 | 498 |
Error determining meter reading | Space: object requires documentation | |
| 499 | 499 |
Error determining meter reading | Space: object requires documentation | |
| 500 | 500 |
Enter a lower limit for the interval | Space: object requires documentation | |
| 501 | 501 |
You chose more than one billing document | Space: object requires documentation | |
| 502 | 502 |
The quantity base for price &1 is zero | Space: object requires documentation | |
| 503 | 503 |
No profile value exists for profile &1 period &2 to &3 | Space: object requires documentation | |
| 504 | 504 |
Error occured when opening profile &1 period &2 to &3 | Space: object requires documentation | |
| 505 | 505 |
RTP operands only possible for operand categories QUANT, DEMAND or AMOUNT | Space: object requires documentation | |
| 506 | 506 |
No register allocations for role &1 | Space: object requires documentation | |
| 507 | 507 |
No register allocations for role &1 until &2 | Space: object requires documentation | |
| 508 | 508 |
Billing document &1 already invoiced with invoicing document &2 | Space: object requires documentation | |
| 509 | 509 |
In gas procedure &1 the VCF is missing from the VCF procedure &2 | Space: object requires documentation | |
| 510 | 510 |
Choose only one volume correction factor access when using VCF from reg. | Space: object requires documentation | |
| 511 | 511 |
Volume correction factor is missing for register for period &2 to &3 | Space: object requires documentation | |
| 512 | 512 |
Cannot maintain MeasPrPror/GasPrDeterm/GasPrCorr for thermal gas bill. &1 | Space: object requires documentation | |
| 513 | 513 |
Not possible to take JT effect into account for thermal gas billing 03 | Space: object requires documentation | |
| 514 | 514 |
Joule-Thompson effect is not taken into account for special procedures | Space: object requires documentation | |
| 515 | 515 |
In gas procedure &1, &3 is missing from VCF procedure &2 | Space: object requires documentation | |
| 516 | 516 |
Spec. proc. for register rel. ZZ: compressibility only possible by device | Space: object requires documentation | |
| 517 | 517 |
You can only enter the RTP interface when interval counters are allowed | Space: object requires documentation | |
| 518 | 518 |
RTP interface &1 has division &2 instead &3 | Space: object requires documentation | |
| 519 | 519 |
RTP interface &1 does not exist | Space: object requires documentation | |
| 520 | 520 |
Rate for interval meter permitted; enter an RTP interface | Space: object requires documentation | |
| 521 | 521 |
Operand &1 only permissible for interval meter rates | Space: object requires documentation | |
| 522 | 522 |
You cannot use RTP operand &1 as an output operand | Space: object requires documentation | |
| 523 | 523 |
Rate does not contain RTP operands | Space: object requires documentation | |
| 524 | 524 |
Error in user exit EXIT_SAPLEA01_006 | Space: object requires documentation | |
| 525 | 525 |
No interval meter rate allocated to rate type &1 and rate category &2 | Space: object requires documentation | |
| 526 | 526 |
Cannot reset document number &1 due to re-billing &2 | Space: object requires documentation | |
| 527 | 527 |
RTP interface &2 does not supply operand &1 | Space: object requires documentation | |
| 528 | 528 |
Schema &1 contains steps for rate &2 in another sequence | Space: object requires documentation | |
| 529 | 529 |
Fields will be hidden for the gross price | Space: object requires documentation | |
| 530 | 530 |
Schema steps compared to sequence of rate &1 steps | Space: object requires documentation | |
| 531 | 531 |
You cannot maintain all fields for dynamic period control | Space: object requires documentation | |
| 532 | 532 |
Error &3 in &4 when accessing RTP component &1 period &2 | Space: object requires documentation | |
| 533 | 533 |
Error &3 in &4 when accessing RTP component &1 event parameter &2 | Space: object requires documentation | |
| 534 | 534 |
RTP component &1: Event parameter &2, event &3, access error &4 | Space: object requires documentation | |
| 535 | 535 |
Incorrect call of adjustment reversal f. cust. change in doc. no. &1 | Space: object requires documentation | |
| 536 | 536 |
Incorrect call of adjustment reversal for document number &1 | Space: object requires documentation | |
| 537 | 537 |
Incorrect call of adjustment reversal for contract change for doc. no. &1 | Space: object requires documentation | |
| 538 | 538 |
Select an output parameter for unit of measure &1 | Space: object requires documentation | |
| 539 | 539 |
No further adjustment reversal possible for billing document &1 | Space: object requires documentation | |
| 540 | 540 |
Error in user exit "EXIT_SAPLEABW_001" | Space: object requires documentation | |
| 541 | 541 |
Cannot carry out meter reading unit replacement | Space: object requires documentation | |
| 542 | 542 |
Cannot carry out meter reading unit replacement | Space: object requires documentation | |
| 543 | 543 |
Doc. no. &1: Cannot cancel adjustment reversal | Space: object requires documentation | |
| 544 | 544 |
Doc. no. &1: Adj. rev. (cust./cont. change) only poss. for zero bill | Space: object requires documentation | |
| 545 | 545 |
Doc. no. &1: Error cancelling adjustment reversal | Space: object requires documentation | |
| 546 | 546 |
Cancel doc. no. &1: Cannot cancel adjustment revers. (cust./cont. change) | Space: object requires documentation | |
| 547 | 547 |
Doc. no. &1: Orig. doc. number for cancelling adjust. reversal missing | Space: object requires documentation | |
| 548 | 548 |
Print. doc. &2 for billing doc. &1 has already been cancelled for billing | Space: object requires documentation | |
| 549 | 549 |
Billing document &1 has not been invoiced correctly | Space: object requires documentation | |
| 550 | 550 |
Document &1 has not been cancelled | Space: object requires documentation | |
| 551 | 551 |
Doc. number &1: Cannot cancel adjustment reversal | Space: object requires documentation | |
| 552 | 552 |
Contract &1 (doc. no. &2) does not fit contract &3 (doc. no. &4) | Space: object requires documentation | |
| 553 | 553 |
Document &1: Print document &2 is more recent than print document &3 | Space: object requires documentation | |
| 554 | 554 |
Specify a weighting key | Space: object requires documentation | |
| 555 | 555 |
You cannot use a weighting key with the "Last value" procedure | Space: object requires documentation | |
| 556 | 556 |
Doc. no. &1 (contract &2) has separate period-end billing | Space: object requires documentation | |
| 557 | 557 |
Internal error: price is inconsistent | Space: object requires documentation | |
| 558 | 558 |
Unknown value &1, domain &2, program &3, routine &4 | Space: object requires documentation | |
| 559 | 559 |
Invalid value &1: ID &2, user exit &3, function &4 | Space: object requires documentation | |
| 560 | 560 |
Invalid value &1: ID &2, routine &3, include &4 | Space: object requires documentation | |
| 561 | 561 |
Document number &1 of contract &2: error during simulation run | Space: object requires documentation | |
| 562 | 562 |
Contract &1: Error during re-billing (contract/customer change) | Space: object requires documentation | |
| 563 | 563 |
Document no. &1: Adjustment reversal can only be partially canceled | Space: object requires documentation | |
| 564 | 564 |
Install. &1, billing date &2: Bill. doc. &3, line item &4 inconsistent | Space: object requires documentation | |
| 565 | 565 |
Unit of measurement &1, time &2-&3: Error in usage factor | Space: object requires documentation | |
| 566 | 566 |
Doc. no. &1, installation &2, period &3-&4: Error cancelling usage factor | Space: object requires documentation | |
| 567 | 567 |
Operand period &1-&2 is not within billing period &3-&4 | Space: object requires documentation | |
| 568 | 568 |
Cannot determine usage factor for bill &1, operand &2 due to schema step | Space: object requires documentation | |
| 569 | 569 |
Cannot determine usage factor (operand &1/&2 equals unit of measure &3) | Space: object requires documentation | |
| 570 | 570 |
Conversion error: Date &1, time &2, time zone &3 to time zone &4 | Space: object requires documentation | |
| 571 | 571 |
Schema step &1: Table layout &2 not possible for period-end billing | Space: object requires documentation | |
| 572 | 572 |
Period-end billing rate &1 cannot be used | Space: object requires documentation | |
| 573 | 573 |
Backbilling is not allowed in schema &1 | Space: object requires documentation | |
| 574 | 574 |
Billing in advance control &1 is not valid | Space: object requires documentation | |
| 575 | 575 |
Period control &1 is not allowed with dynamic period control | Space: object requires documentation | |
| 576 | 576 |
Backbilling group &1 in step &2 is inconsistent | Space: object requires documentation | |
| 577 | 577 |
Formula &1, paramater &2, time &3-&4: Cannot determine calculation mode | Space: object requires documentation | |
| 578 | 578 |
Maintain the time slice generator in step &1 | Space: object requires documentation | |
| 579 | 579 |
The gross price and net price have different zones in price group &4 | Space: object requires documentation | |
| 580 | 580 |
Update type &1 not allowed with dynamic period control | Space: object requires documentation | |
| 581 | 581 |
Gross group &1 is inconsistent | Space: object requires documentation | |
| 582 | 582 |
Gross group &1 is not compatible with period control | Space: object requires documentation | |
| 583 | 583 |
Gross group &1 is only used once | Space: object requires documentation | |
| 584 | 584 |
The gross line field is not consistent in gross group &1 | Space: object requires documentation | |
| 585 | 585 |
Step &1 has no gross group, but the gross line field is selected | Space: object requires documentation | |
| 586 | 586 |
Step &1: Gross line and posting-relevant fields selected | Space: object requires documentation | |
| 587 | 587 |
Step &1: Gross group not allowed with price grouping | Space: object requires documentation | |
| 588 | 588 |
Gross group &1 is used for multiple rates | Space: object requires documentation | |
| 589 | 589 |
No calculation mode for formula &1, parameter &2, event &3 | Space: object requires documentation | |
| 590 | 590 |
Net lines for the gross price are missing in gross group &4 | Space: object requires documentation | |
| 591 | 591 |
Net lines for the gross price are missing in gross group &4 | Space: object requires documentation | |
| 592 | 592 |
Net lines for the gross price are missing in gross group &4 | Space: object requires documentation | |
| 593 | 593 |
Step &1: Variant category &2 is not valid | Space: object requires documentation | |
| 594 | 594 |
Billing document &1 contains an error in gross group &4 | Space: object requires documentation | |
| 595 | 595 |
Internal: Differentiator missing in gross group &1 | Space: object requires documentation | |
| 596 | 596 |
Internal: Gross group &2 has no gross price in billing document &1 | Space: object requires documentation | |
| 597 | 597 |
Internal: Error reading weighting key &1 (&2 &3) | Space: object requires documentation | |
| 598 | 598 |
The temperature area in installation &2 is missing for weighting key &1 | Space: object requires documentation | |
| 599 | 599 |
Installation &1, date &2: Temp. area missing for degree day weight. &3 | Space: object requires documentation | |
| 600 | 600 |
Period category not filled in table IZWST | Space: object requires documentation | |
| 601 | 601 |
Inconsistency in MR document &1, connector &2, log. register &3, date &4 | Space: object requires documentation | |
| 602 | 602 |
Internal error: CSNO &1 not found in table &2 | Space: object requires documentation | |
| 603 | 603 |
Meter reading reason is not relevant for billing | Space: object requires documentation | |
| 604 | 604 |
No proration due to incorrect schema setup for dynamic period control | Space: object requires documentation | |
| 605 | 605 |
Error during dynamic billing reversal | Space: object requires documentation | |
| 606 | 606 |
Installation &1 not valid on key date &2 | Space: object requires documentation | |
| 607 | 607 |
Do not process positive/negative time-dependent quantities simultaneously | Space: object requires documentation | |
| 608 | 608 |
The document will be released in the background | Space: object requires documentation | |
| 609 | 609 |
An error occurred - invoice account &1 again | Space: object requires documentation | |
| 610 | 610 |
Error during release of document &1 - restart the process | Space: object requires documentation | |
| 611 | 611 |
No documents available for release in the background | Space: object requires documentation | |
| 612 | 612 |
Gas procedure &1 is not valid | Space: object requires documentation | |
| 613 | 613 |
Gas procedure &1 is not valid | Space: object requires documentation | |
| 614 | 614 |
A transport request for discount &1 was generated | Space: object requires documentation | |
| 615 | 615 |
Gross group &1 does not exist in schema &2 for rate &3 | Space: object requires documentation | |
| 616 | 616 |
Error in user exit EXIT_SAPLEA01_006 | Space: object requires documentation | |
| 617 | 617 |
DEMAND18 cannot process register operands with multiple registers | Space: object requires documentation | |
| 618 | 618 |
Gas date must lie between the previous and the subsequent meter reading | Space: object requires documentation | |
| 619 | 619 |
Document and contract have different currencies; conversion not possible | Space: object requires documentation | |
| 620 | 620 |
You are not authorized to create object &1 in division &2, class &3 | Space: object requires documentation | |
| 621 | 621 |
You are not authorized to change object &1 in division &2, class &3 | Space: object requires documentation | |
| 622 | 622 |
You are not authorized to display object &1 in division &2, class &3 | Space: object requires documentation | |
| 623 | 623 |
The time slices of operand &1 are not identical | Space: object requires documentation | |
| 624 | 624 |
No periods to be set up exist in schema &2 for category &1 | Space: object requires documentation | |
| 625 | 625 |
An actual meter reading result must be followed by recalculation | Space: object requires documentation | |
| 626 | 626 |
Error in enhancement EBIS0009: Price &1 not available in currency &2 | Space: object requires documentation | |
| 627 | 627 |
Error in User Exit EXIT_SAPLEA01_007 | Space: object requires documentation | |
| 628 | 628 |
Several rates (&3-&4) found for rate type &1 and rate category &2 | Space: object requires documentation | |
| 629 | 629 |
Division &1 unsuitable for permissibility for waste management | Space: object requires documentation | |
| 630 | 630 |
Variant &1 is only valid for rates in Waste Management | Space: object requires documentation | |
| 631 | 631 |
Variant &1 is invalid for rates in Waste Management | Space: object requires documentation | |
| 632 | 632 |
Special value assignment &2 of operand &1 is not valid | Space: object requires documentation | |
| 633 | 633 |
Error in user exit EXIT_SAPLEA54_002 | Space: object requires documentation | |
| 634 | 634 |
Value &1 for grouping of gas factors (transaction EA74) is unrecognized | Space: object requires documentation | |
| 635 | 635 |
Tax determination group &1 is inconsistent | Space: object requires documentation | |
| 636 | 636 |
Enter a tax determinataion group in schema step &1 | Space: object requires documentation | |
| 637 | 637 |
Simulation cannot be carried out from billing | Space: object requires documentation | |
| 638 | 638 |
RTP interface is already displayed for rate &1 | Space: object requires documentation | |
| 639 | 639 |
Selected rate &1 does not have an RTP interface | Space: object requires documentation | |
| 640 | 640 |
Billing schema already contains &1 steps | Space: object requires documentation | |
| 641 | 641 |
Invoicing is not possible for contract account &1 | Space: object requires documentation | |
| 642 | 642 |
Day offset &1 does not match interval size &2 | Space: object requires documentation | |
| 643 | 643 |
Contract &1 is blocked for billing | Space: object requires documentation | |
| 644 | 644 |
You did not select an RTP rate | Space: object requires documentation | |
| 645 | 645 |
Installation &1: No contract valid from &2 to &3 | The short text describes the object sufficiently | |
| 646 | 646 |
DPC ESTB: Meter reading result determination at start of &1 has errors... | Space: object requires documentation | |
| 647 | 647 |
DPC ESTB: Meter reading result determination at end of &2 has errors | Space: object requires documentation | |
| 648 | 648 |
The reason categories specified for dynamic per.ctrl &1 do not match up | Space: object requires documentation | |
| 649 | 649 |
DPC ESTB: Meter reading result determination at start of &1 has errors | Space: object requires documentation | |
| 650 | 650 |
You changed billing-specific data before the last billing (&1) | Space: object requires documentation | |
| 651 | 651 |
No documents found for contract &1 | Space: object requires documentation | |
| 652 | 652 |
The to-date for &1 has been adjusted | Space: object requires documentation | |
| 653 | 653 |
Values exist in the reversal period for installation &1 , operand &2 | Space: object requires documentation | |
| 654 | 654 |
DPC ESTB: Meter reading result determination at end of &2 has errors | Space: object requires documentation | |
| 655 | 655 |
You cannot combine dynamic period ctrl &1 with budget billing amount | Space: object requires documentation | |
| 656 | 656 |
DPC ESTB: Meter reading result determ. for previous period has errors | Space: object requires documentation | |
| 657 | 657 |
DPC ESTB: Meter reading result determ. for previous period has errors | Space: object requires documentation | |
| 658 | 658 |
Meter reading result determination for previous period has errors | Space: object requires documentation | |
| 659 | 659 |
Previous period &1-&2 UNEQUAL to budget billing period &3-&4 | Space: object requires documentation | |
| 660 | 660 |
You can only combine to-the-day air pressure with the daily procedure | Space: object requires documentation | |
| 661 | 661 |
Manual reversal is necessary to obtain correct period-end billing | Space: object requires documentation | |
| 662 | 662 |
Invalid value in field &1 and/or &2 routine &3 document number &4 | Space: object requires documentation | |
| 663 | 663 |
DPC ESTB:BillOrd. Install. &1, SchBillDate &2, BillTrans. &3 not billable | Space: object requires documentation | |
| 664 | 664 |
Error in user exit 'EXIT_SAPLEABR_001' | Space: object requires documentation | |
| 665 | 665 |
DPC ESTB: Category of current period is not unique | Space: object requires documentation | |
| 666 | 666 |
DPC-ESTB: Original category of current period is not unique | Space: object requires documentation | |
| 667 | 667 |
Document &1 -> print document &2 not reversed (chain &3) | Space: object requires documentation | |
| 668 | 668 |
Billing doc. &1 (invoicing indicator incorrect in ERCHC) (start doc. &2) | Space: object requires documentation | |
| 669 | 669 |
Adjust. reversal not executed for billing document &1 (start document &2) | Space: object requires documentation | |
| 670 | 670 |
Billing doc. &1 not reversable by EA21 (invoicing doc. &2 reversed w. &3) | Space: object requires documentation | |
| 671 | 671 |
No transaction found with search term you specified | Space: object requires documentation | |
| 672 | 672 |
Device/register &1 date &2: multiple meter reading overflow | Space: object requires documentation | |
| 673 | 673 |
Installation &1 time &2-&3: Error determining usage factor | Space: object requires documentation | |
| 674 | 674 |
The billing document does not contain a document number: Contract &1 | Space: object requires documentation | |
| 675 | 675 |
Billing class is inconsistent | Space: object requires documentation | |
| 676 | 676 |
No values found for rate &1, rate fact group &2 | Space: object requires documentation | |
| 677 | 677 |
Meter reading unit does not match rate category | Space: object requires documentation | |
| 678 | 678 |
Error changing from rate category &1 to rate category &2 | Space: object requires documentation | |
| 679 | 679 |
No categories of current period can be determined | Space: object requires documentation | |
| 680 | 680 |
Rate change is only possible after dynamic backbilling | Space: object requires documentation | |
| 681 | 681 |
Rate category change is only possible after meter reading on database | Space: object requires documentation | |
| 682 | 682 |
Rate category &1 does not exist | Space: object requires documentation | |
| 683 | 683 |
Operand &1 is not a register operand | Space: object requires documentation | |
| 684 | 684 |
You have not defined a season | Space: object requires documentation | |
| 685 | 685 |
Operand &1 has an impermissible control for this variant | Space: object requires documentation | |
| 686 | 686 |
Number of seasons is greater than the number of output operands | Space: object requires documentation | |
| 687 | 687 |
Error in User Exit 'EXIT_SAPLEBRECOV_001' | Space: object requires documentation | |
| 688 | 688 |
End of the last simulation period is not clear | Space: object requires documentation | |
| 689 | 689 |
Start date cannot be determined | Space: object requires documentation | |
| 690 | 690 |
Discount &1 already exists w/o currency. Choose another key. | Space: object requires documentation | |
| 691 | 691 |
ERCHV anchor line not used for backbilling | Space: object requires documentation | |
| 692 | 692 |
Document &1 preceding document &2 is in the archiving period | Space: object requires documentation | |
| 693 | 693 |
Billing document could not be determined for installation &1 | Space: object requires documentation | |
| 694 | 694 |
Price &1 not available in currency &2 | Space: object requires documentation | |
| 695 | 695 |
Discount/surcharge &1 not available in currency &2 | Space: object requires documentation | |
| 696 | 696 |
Error in enhancement EBIS0009: Discount &1 not available in currency &2 | Space: object requires documentation | |
| 697 | 697 |
Billing orders &1, &2, &3 cannot be deleted | Space: object requires documentation | |
| 698 | 698 |
No entry in therm. gas billing | The short text describes the object sufficiently | |
| 699 | 699 |
No Authorization to create price &1 division, &2 bill class &3, reason &4 | Space: object requires documentation | |
| 700 | 700 |
No authorization to change price &1, division &2, bill class &3, reasn &4 | Space: object requires documentation | |
| 701 | 701 |
No authorization to display price &1, division &2, bill class &3, reasn&4 | Space: object requires documentation | |
| 702 | 702 |
Price block adjustment only possible for quantity-dependent block prices | Space: object requires documentation | |
| 703 | 703 |
Price &1 cannot be selected as an average price | The short text describes the object sufficiently | |
| 704 | 704 |
Billing document &1 reversed | Space: object requires documentation | |
| 705 | 705 |
Enter a text for the price | Space: object requires documentation | |
| 706 | 706 |
Price level can only be entered for rental price (price cat. 3) | Space: object requires documentation | |
| 707 | 707 |
Do not enter a unit of meas.for flat-rate/rental price (price cat. 2/3) | Space: object requires documentation | |
| 708 | 708 |
Enter a unit of measurement | Space: object requires documentation | |
| 709 | 709 |
Do not enter a time basis/time category for quantity-based scale price | Space: object requires documentation | |
| 710 | 710 |
Do not select the quantity-based standard price as FF price limit | Space: object requires documentation | |
| 711 | 711 |
Enter time basis and time category | Space: object requires documentation | |
| 712 | 712 |
Installation cannot be changed | Space: object requires documentation | |
| 713 | 713 |
Installation &1 is not available | Space: object requires documentation | |
| 714 | 714 |
Specify an entry with from block 0 for currency &2, date &1 | Space: object requires documentation | |
| 715 | 715 |
Entry already exists for date &1 and from block &2 | Space: object requires documentation | |
| 716 | 716 |
Zones cannot be defined for quantity-based prices | Space: object requires documentation | |
| 717 | 717 |
Enter a date in the field 'valid from' | Space: object requires documentation | |
| 718 | 718 |
Not possible to update operand &1 to the installation facts | Space: object requires documentation | |
| 719 | 719 |
Div., billing class and price type can only be maintained when created | Space: object requires documentation | |
| 720 | 720 |
Enter a billing class | Space: object requires documentation | |
| 721 | 721 |
Enter a division | Space: object requires documentation | |
| 722 | 722 |
Enter a price | Space: object requires documentation | |
| 723 | 723 |
The indicator set cannot be used for rate type &1 | Space: object requires documentation | |
| 724 | 724 |
Operand &1 cannot be limited | Space: object requires documentation | |
| 725 | 725 |
Dependent entries in the volume correction factor procedure table (TE685) | Space: object requires documentation | |
| 726 | 726 |
Price &1 cannot be deleted or changed | Space: object requires documentation | |
| 727 | 727 |
Enter discount type and category | Space: object requires documentation | |
| 728 | 728 |
Discount type and category can only be entered for flat-rate scale prices | Space: object requires documentation | |
| 729 | 729 |
Too many price entries. Limit the selection. | Space: object requires documentation | |
| 730 | 730 |
Select exactly one currency. | Space: object requires documentation | |
| 731 | 731 |
Access date for customer-defined access procedure is missing | Space: object requires documentation | |
| 732 | 732 |
Enter a price category | Space: object requires documentation | |
| 733 | 733 |
Consumption type &1 is inconsistent with other data | Space: object requires documentation | |
| 734 | 734 |
Select one of the currencies &2 | Space: object requires documentation | |
| 735 | 735 |
Automation data: To-date comes before from-date | Space: object requires documentation | |
| 736 | 736 |
Calculated amount is too large | Space: object requires documentation | |
| 737 | 737 |
Interim billing cannot be executed | Space: object requires documentation | |
| 738 | 738 |
Enter an installation | Space: object requires documentation | |
| 739 | 739 |
Values for operand &1 must not be deleted | Space: object requires documentation | |
| 740 | 740 |
&1: Unknown or unexpected meter reading reason &2 in &3 | The short text describes the object sufficiently | |
| 741 | 741 |
Price &2 can only be used in the installation facts of installation &1 | Space: object requires documentation | |
| 742 | 742 |
Price &2 can only be allocated to a product-related operand | Space: object requires documentation | |
| 743 | 743 |
Installation &1 in price &2 is not the same as installation &3 | Space: object requires documentation | |
| 744 | 744 |
Adjustment reversal for document &1 from contract &2 is not permitted | The short text describes the object sufficiently | |
| 745 | 745 |
Enter a valid value for rounding (interval -9 to +9) | The short text describes the object sufficiently | |
| 746 | 746 |
Document was released by user &1, on &2, at &3 | Space: object requires documentation | |
| 747 | 747 |
Document &1 does not have a log | Space: object requires documentation | |
| 748 | 748 |
Start generation: Date: &1 Time: &2 | The short text describes the object sufficiently | |
| 749 | 749 |
End generation: Date: &1 Time: &2 | The short text describes the object sufficiently | |
| 750 | 750 |
No documents determined from installation facts of istallation &1 | Space: object requires documentation | |
| 751 | 751 |
Inconsistent time slices in installn facts of installn &1 (operand &2 &3) | Space: object requires documentation | |
| 752 | 752 |
No billing document found between &1 and &2 | Space: object requires documentation | |
| 753 | 753 |
From block must be different to infinity ('9999999999') | The short text describes the object sufficiently | |
| 754 | 754 |
Generated ERCHV in &1 were deleted | The short text describes the object sufficiently | |
| 755 | 755 |
Consumption history generated in document &1 | Space: object requires documentation | |
| 756 | 756 |
&1 documents were processed for extraction | The short text describes the object sufficiently | |
| 757 | 757 |
No values exist for reference value &1 | Space: object requires documentation | |
| 758 | 758 |
A franchise fee procedure cannot be found using document type &1 | Space: object requires documentation | |
| 759 | 759 |
No notes exist for schema step &1 | Space: object requires documentation | |
| 760 | 760 |
Invoicing order missing for billing document &1 | Space: object requires documentation | |
| 761 | 761 |
Calculation triggers already exist for profile &1 | Space: object requires documentation | |
| 762 | 762 |
The calculated consumption is too high | Space: object requires documentation | |
| 763 | 763 |
Operand name must not contain special characters "*" and "," | Space: object requires documentation | |
| 764 | 764 |
Extractions index cannot be deleted because archiving already started | Space: object requires documentation | |
| 765 | 765 |
Consumption history not generated in document &1 | Space: object requires documentation | |
| 766 | 766 |
Same consumption history already exists in document &1 | Space: object requires documentation | |
| 767 | 767 |
Consumption history generated in &1 documents of installation &2 | Space: object requires documentation | |
| 768 | 769 |
Change to group characteristics for installation &1 date &2 not permitted | Space: object requires documentation | |
| 769 | 770 |
Division &1 does not exist | Space: object requires documentation | |
| 770 | 771 |
Billing class &1 does not exist | Space: object requires documentation | |
| 771 | 772 |
GASABART &1 does not exist | Space: object requires documentation | |
| 772 | 773 |
Outsorting group &1 does not exist | Space: object requires documentation | |
| 773 | 774 |
Statistics group type &1 does not exist | Space: object requires documentation | |
| 774 | 775 |
Operand category &1 does not exist | Space: object requires documentation | |
| 775 | 776 |
Unit of measurement &1 does not exist | Space: object requires documentation | |
| 776 | 777 |
Meter reading group &1 does not exist | Space: object requires documentation | |
| 777 | 778 |
Weighting key &1 does not exist | Space: object requires documentation | |
| 778 | 779 |
Operand group &1 does not exist | Space: object requires documentation | |
| 779 | 780 |
Consumption type &1 does not exist | Space: object requires documentation | |
| 780 | 781 |
Currency unit &1 does not exist | Space: object requires documentation | |
| 781 | 782 |
Rate cat. &1 has an inconsistent definition for back/period-end billing | Space: object requires documentation | |
| 782 | 783 |
Operand &1 has an inconsistent rounding definition | Space: object requires documentation | |
| 783 | 784 |
Operand &1 has inconsistent values in the service fields | Space: object requires documentation | |
| 784 | 785 |
Discount/surchage &1 has an incorrect category | Space: object requires documentation | |
| 785 | 786 |
Field &1 in discount/surcharge &2 is inconsistent | Space: object requires documentation | |
| 786 | 787 |
Currency &1 in discount/surcharge &2 is inconsistent | Space: object requires documentation | |
| 787 | 788 |
Inconsistent gas date for meter reading &1, device &2, register &3 | Space: object requires documentation | |
| 788 | 789 |
The time restriction in discount/surcharge &1 is inconsistent | Space: object requires documentation | |
| 789 | 790 |
Error in BAdI for price block adjustment ISU_BI_PR_BLOCK_ADJ | Space: object requires documentation | |
| 790 | 791 |
Internal error calling method &1 | Space: object requires documentation | |
| 791 | 792 |
Internal error: Inconsistent parameter &1 in method &2 | Space: object requires documentation | |
| 792 | 793 |
Contract &2 billing document &1 does not belong to installation group | Space: object requires documentation | |
| 793 | 794 |
Bill. order of inst. &1 with sched. bill date &2 does not belong to instG | Space: object requires documentation | |
| 794 | 795 |
No text symbols ( program &1 language &2 <> 'D') found | Space: object requires documentation | |
| 795 | 796 |
No text symbols found ( program &1 language &2 ) | Space: object requires documentation | |
| 796 | 797 |
Documents/billing orders are missing from secondary installation &1 | Space: object requires documentation | |
| 797 | 798 |
Billing period from sec. installation &1 does not match prim. inst. &2 | Space: object requires documentation | |
| 798 | 799 |
Billing document missing for secondary installation &1 | Space: object requires documentation | |
| 799 | 800 |
Error during log processing | Space: object requires documentation | |
| 800 | 801 |
The consistency check has not yet been executed | Space: object requires documentation | |
| 801 | 802 |
Download rejected due to inconsistent objects | Space: object requires documentation | |
| 802 | 803 |
Transport no___: &1 | Space: object requires documentation | |
| 803 | 804 |
Download to file: _ &1 cancelled | Space: object requires documentation | |
| 804 | 805 |
Master data successfully downloaded to file &1 | Space: object requires documentation | |
| 805 | 806 |
&1 executed | Space: object requires documentation | |
| 806 | 807 |
Incorrect file format, upload has to be cancelled | The short text describes the object sufficiently | |
| 807 | 808 |
No objects or inconsistent transport requirements found | Space: object requires documentation | |
| 808 | 809 |
Transport rejected: Different releases or same system/client | Space: object requires documentation | |
| 809 | 810 |
Start of consistency check for billing master data &1 - &2 | Space: object requires documentation | |
| 810 | 811 |
End of consistency check for billing master data &1 - &2 | Space: object requires documentation | |
| 811 | 812 |
<<<< Start of consistency check for &1 | Space: object requires documentation | |
| 812 | 813 |
>>>> End of check of &1 &2 &3 &4 | Space: object requires documentation | |
| 813 | 814 |
&1 &2 checked, &3 inconsistent | Space: object requires documentation | |
| 814 | 815 |
No object found for the update | Space: object requires documentation | |
| 815 | 816 |
Objects could not be locked for the update | Space: object requires documentation | |
| 816 | 817 |
Error accessing database | Space: object requires documentation | |
| 817 | 818 |
Update successfully completed ! | Space: object requires documentation | |
| 818 | 819 |
Update completed using forced transaction | Space: object requires documentation | |
| 819 | 820 |
Real update not permitted in simulation run | Space: object requires documentation | |
| 820 | 821 |
Division &1 still used by current or historical installations | Space: object requires documentation | |
| 821 | 822 |
Update terminated due to inconsistent objects | Space: object requires documentation | |
| 822 | 823 |
Update or simulation has not yet been executed | Space: object requires documentation | |
| 823 | 824 |
Update cancelled | Space: object requires documentation | |
| 824 | 825 |
Simulation or update has already been executed | Space: object requires documentation | |
| 825 | 826 |
Update has already been executed for the transport file | Space: object requires documentation | |
| 826 | 827 |
This variant enhances price &1 without adjusting the price block | Space: object requires documentation | |
| 827 | 828 |
Inconsistent objects found during update simulation | Space: object requires documentation | |
| 828 | 829 |
No inconsistent objects found during update simulation | Space: object requires documentation | |
| 829 | 830 |
Report can only be executed by &1 in system &2, client &3 | Space: object requires documentation | |
| 830 | 831 |
&1 has not yet been registered for the report | Space: object requires documentation | |
| 831 | 832 |
Error during backup of modified master data | Space: object requires documentation | |
| 832 | 833 |
Master data was deleted | Space: object requires documentation | |
| 833 | 834 |
Reading error for table &1 in &2 ( key &3 = &4) | Space: object requires documentation | |
| 834 | 835 |
Include &1: Error allocating field symbol &2 to &3 | Space: object requires documentation | |
| 835 | 836 |
Secondary installation &1: Installation role changed | Space: object requires documentation | |
| 836 | 837 |
Grouping type &1 has distribution type &2 | Space: object requires documentation | |
| 837 | 838 |
No installation roles allocated to grouping type &1 | Space: object requires documentation | |
| 838 | 839 |
Grouping type &1 has distribution-relevant installation role &2 | Space: object requires documentation | |
| 839 | 840 |
Installation role &1 is not used for any grouping type | Space: object requires documentation | |
| 840 | 841 |
Grouping type &1 installation role &2: Consumption-relevant ind. &3 | Space: object requires documentation | |
| 841 | 842 |
Grouping type &1 installation role &2: Distribution-relevant indicator &3 | Space: object requires documentation | |
| 842 | 843 |
Impermissible combination of indicators | Space: object requires documentation | |
| 843 | 844 |
Distribution type &1 not used | Space: object requires documentation | |
| 844 | 845 |
Grouping type &1 installation role &2: Operand &3 not permitted | Space: object requires documentation | |
| 845 | 846 |
Target operand &1 is not permitted for supply using ERCHV | Space: object requires documentation | |
| 846 | 847 |
Primary installation billing order: End of billing period not specified | Space: object requires documentation | |
| 847 | 848 |
Termination caused by error in processing secondary installation | Space: object requires documentation | |
| 848 | 849 |
Secondary installation &1: Billing order must already be billed | Space: object requires documentation | |
| 849 | 850 |
Billing order for primary inst. not found for secondary installation | Space: object requires documentation | |
| 850 | 851 |
Cannot uniquely determine primary inst. billing order for sec. inst. | Space: object requires documentation | |
| 851 | 852 |
Installation &1 is inconsistent | Space: object requires documentation | |
| 852 | 853 |
Cannot uniquely determine primary inst. billing doc. for sec. inst. | Space: object requires documentation | |
| 853 | 854 |
Distribution bill cannot be used with this billing method | Space: object requires documentation | |
| 854 | 855 |
If indicator &1 or &2 is set, set indicator &3 as well | Space: object requires documentation | |
| 855 | 856 |
Primary installation w. distribution: Document &1 cannot be ind. reversed | Space: object requires documentation | |
| 856 | 857 |
Sec. inst.: Customizing does not permit individual reversal of doc. &1 | Space: object requires documentation | |
| 857 | 858 |
Update error table ERCH: Document &1 for prim.inst document &2 for S.ins | Space: object requires documentation | |
| 858 | 859 |
Impermissible call ISU_BILL_CANCELLATION for installation group reversal | Space: object requires documentation | |
| 859 | 860 |
Programming error lock parameters: Call ISU_BILL_CANCELLATION | Space: object requires documentation | |
| 860 | 861 |
Programming error lock table: Aufruf ISU_BILL_CANCELLATION | Space: object requires documentation | |
| 861 | 862 |
Programming error when calling ISU_BILL_CANCELLATION | Space: object requires documentation | |
| 862 | 863 |
Installation &1 is not a primary installation on &2 | Space: object requires documentation | |
| 863 | 864 |
Sec. installation &1: Impermissible change to primary installation &4 | Space: object requires documentation | |
| 864 | 865 |
Inst. Group: Reversal of doc.no. &1 (doc. no. &2 for PI) ended with error | Space: object requires documentation | |
| 865 | 866 |
Reversal: Update error table ERCH: Document &1 for PI, doc. &2 for SI | Space: object requires documentation | |
| 866 | 867 |
Billing document &1, contract &2 does not fit current contract &3 | Space: object requires documentation | |
| 867 | 868 |
No documents determined for your entry | Space: object requires documentation | |
| 868 | 869 |
Update error: Secondary installation billing order &1 (doc. &2 for PI) | Space: object requires documentation | |
| 869 | 870 |
Inst. group: Reversal of doc. no. &1 (doc. for PI) ended with error | Space: object requires documentation | |
| 870 | 871 |
Child print doc. reversal: Doc. no.&1 (doc.no.&2 for PI) ended with error | Space: object requires documentation | |
| 871 | 872 |
Child print document reversal: Doc.no. &1 (doc. for PI) ended with error | Space: object requires documentation | |
| 872 | 873 |
Child print doc. reversal: Document number &1 (doc.no. &2 for prim. inst) | Space: object requires documentation | |
| 873 | 874 |
Child print doc. reversal: Document no. &1 (doc. for prim. installation) | Space: object requires documentation | |
| 874 | 875 |
Installation group: Reversal document no. &1 (doc. for primary inst.&2) | Space: object requires documentation | |
| 875 | 876 |
Installation group: Reversal document number &1 (doc. for primary inst.) | Space: object requires documentation | |
| 876 | 877 |
Billing document &1 | Space: object requires documentation | |
| 877 | 878 |
Start of installation group: | Space: object requires documentation | |
| 878 | 879 |
End of installation group | Space: object requires documentation | |
| 879 | 880 |
Incomplete selection for primary installation document &1 | Space: object requires documentation | |
| 880 | 881 |
> Secondary installation document &1 (primary installation doc. &2) | Space: object requires documentation | |
| 881 | 882 |
Not relevant for translation (test message) | Space: object requires documentation | |
| 882 | 883 |
Billing document &1 does not contain consumption lines | The short text describes the object sufficiently | |
| 883 | 884 |
Billing order &1 (primary installation &2): Interval check not poss. | Space: object requires documentation | |
| 884 | 885 |
Bill. order &1 (prim. inst. &2): End of bill. period outside interval | Space: object requires documentation | |
| 885 | 886 |
Billing order for secondary installation &1 cannot be billed yet | Space: object requires documentation | |
| 886 | 887 |
Error updating billing order for secondary installation &1 | Space: object requires documentation | |
| 887 | 888 |
* | Space: object requires documentation | |
| 888 | 889 |
Internal billing simulation for secondary inst.&1 cancelled with error | Space: object requires documentation | |
| 889 | 890 |
Cannot determine reconciliation key | Space: object requires documentation | |
| 890 | 891 |
Consumption information for negative consumption difference | Space: object requires documentation | |
| 891 | 892 |
Billing document &1 for primary installation &2 is outsorted | Space: object requires documentation | |
| 892 | 893 |
Billing document &1 for secondary installation &2 is outsorted | Space: object requires documentation | |
| 893 | 894 |
Simulation document for secondary installation &1 is outsorted | Space: object requires documentation | |
| 894 | 895 |
Outsorted billing docs for secondary installation lead to termination | Space: object requires documentation | |
| 895 | 896 |
Time zone &1 from profile &2 does not match time zone &3 from billing | The short text describes the object sufficiently | |
| 896 | 897 |
There are quantities with different plus/minus signs in operand &1 | Space: object requires documentation | |
| 897 | 898 |
Quantity in operand &1 is zero | Space: object requires documentation | |
| 898 | 899 |
Inconsistency: Indicator BICO is set incorrectly in billing | The short text describes the object sufficiently | |
| 899 | 900 |
The document was reversed by user &1 on &2 at &3 | The short text describes the object sufficiently | |
| 900 | 902 |
The interval length for the interface and the profile do not match | Space: object requires documentation | |
| 901 | 903 |
Start reversal of billing document | The short text describes the object sufficiently |
History
| Last changed on/by | |
20110810 | SAP |
| SAP Release Created in |
