SAP ABAP Table LDPS_CHA_DATA (Inspection Characteristics for OMS)

Hierarchy

☛

BBPCRM (Software Component) BBPCRM
⤷

PP (Application Component) Production Planning and Control
⤷

LALD (Package) Logistics Automotive Line Design

Basic Data

Table Category	INTTAB	Structure
Structure	LDPS_CHA_DATA	Table Relationship Diagram
Short Description	Inspection Characteristics for OMS

Delivery and Maintenance

Pool/cluster
Delivery Class
Data Browser/Table View Maintenance		Display/Maintenance Allowed with Restrictions

Components


	Field	Data Element	Domain	Data Type	Length	Decimal Places	Short Description	Check table
1	PLNTY	PLNTY	PLNTY	CHAR	1	0	Task List Type	*
2	PLNNR	PLNNR	PLNNR	CHAR	8	0	Key for Task List Group
3	MERKNR	QMERKNRP	QMERKNRP	NUMC	4	0	Inspection Characteristic Number
4	GUELTIGAB	DATUV	DATUM	DATS	8	0	Valid-From Date
5	AENDERGNR	AENNR	AENNR	CHAR	12	0	Change Number	*
6	ERSTELLER	ANNAM	USNAM	CHAR	12	0	User Who Created Record
7	ERSTELLDAT	ANDAT	DATUM	DATS	8	0	Date Record Created on
8	AENDERER	QAENDERER	QAENDERER	CHAR	12	0	Name of User who Most Recently Changed the Data Record
9	AENDERDAT	QDATUMAEND	DATUM	DATS	8	0	Date on Which Data Record Was Changed
10	QMTB_WERKS	Q_METH_PLANT	WERKS	CHAR	4	0	Plant for Inspection Method	*
11	PMETHODE	QPMETHODE	QPMETHODE	CHAR	8	0	Inspection Method	*
12	PMTVERSION	QVERSNRPM	QVERSNR	CHAR	6	0	Version Number of the Inspection Method
13	QPMK_REF	QKZ_REF	QKZ	CHAR	1	0	Reference to Master Insp. Characteristic in Task List
14	QPMK_ZAEHL	QZAEHLER	QZAEHLER	CHAR	4	0	Plant for the Master Inspection Characteristic
15	VERWMERKM	QMERKNR	QMERKNR	CHAR	8	0	Master Inspection Characteristics	*
16	MKVERSION	QVERSNRMK	QVERSNR	CHAR	6	0	Version Number of the Master Inspection Characteristic
17	MERKGEW	QMERKGEW	QMERKKLAS	CHAR	2	0	Weighting of the Characteristic	*
18	PROBENR	QPROBEPL	QPROBEPL	NUMC	3	0	Partial Sample No. for Inspection Charac. in Task List
19	PRUEFQUALI	QPRQUALIF	QPRQUALIF	CHAR	5	0	Inspector Qualification	*
20	TOLERANZSL	QTOLERANZ	QTOLERANZ	CHAR	4	0	Tolerance Key	*
21	KURZTEXT	QTXT_CHA	QKURZTEXT	CHAR	40	0	Short Text for Inspection Characteristic
22	LTEXTKZ	QLTEXTKZ	QKZ	CHAR	1	0	Inspection Characteristic Long Text Exists
23	LTEXTEKZ	QKZPRZIEH	QKZWSP	CHAR	1	0	Physical-Sample-Drawing Text Exists
24	KLASANZAHL	QKLASSZAHL	QKLASSZAHL	INT1	3	0	Number of Value Classes for Inspection Results
25	TOLERWAB	QTOLWAB	DATUM	DATS	8	0	Date from Which the Tolerance Change Is Valid
26	TOLERWBIS	QTOLWBIS	DATUM	DATS	8	0	Date Until Which the Tolerance Change Is Valid
27	STICHPRVER	QSTICHVERF	QSTPRVER	CHAR	8	0	Sampling Procedure in Inspection Characteristic	*
28	PROBEMGEH	QPROBME	MEINS	UNIT	3	0	Sample Unit of Measure	*
29	PRUEFEINH	QPROBEFAK	QPROBEFAK	DEC	5	2	Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.)
30	FORMELSL	QFORMELSL	QFORMELSL	CHAR	1	0	Check and Calculate Formula in QM
31	FORMEL1	QFORMEL	QFORMEL	CHAR	60	0	Formula Field
32	FORMEL2	QFORMEL	QFORMEL	CHAR	60	0	Formula Field
33	CODEGR9U	QCODEGRPU	QCODEGRP	CHAR	8	0	Defect Code Group for Rejection at Lower Tolerance	*
34	CODE9U	QCODEU	QCODE	CHAR	4	0	Defect Code for Rejection at Lower Specification Limit	*
35	CODEGR9O	QCODEGRPO	QCODEGRP	CHAR	8	0	Defect Code Group for Rejection at Upper Tolerance	*
36	CODEVR9O	QVERSNR	QVERSNR	CHAR	6	0	Version Number
37	KATAB1	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
38	KATALGART1	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
39	AUSWMENGE1	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
40	AUSWMGWRK1	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
41	KATAB2	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
42	KATALGART2	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
43	AUSWMENGE2	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
44	AUSWMGWRK2	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
45	KATAB3	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
46	KATALGART3	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
47	AUSWMENGE3	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
48	AUSWMGWRK3	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
49	KATAB4	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
50	KATALGART4	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
51	AUSWMENGE4	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
52	AUSWMGWRK4	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
53	KATAB5	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
54	KATALGART5	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
55	AUSWMENGE5	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
56	AUSWMGWRK5	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
57	DUMMY10	QTXT10	QTXT10	CHAR	10	0	Text Line for Additional Information
58	DUMMY20	QTXT20	QTXT20	CHAR	20	0	Text Line for Additional Information
59	DUMMY40	QTXT40	QTXT40	CHAR	40	0	Text Line for Additional Information
60	CHARACT_ID1	QCHARACT_ID1	QCHARACT_ID	CHAR	40	0	Characteristic Description for Quality Data Exchange
61	QERGDATH	QERGDATHPL	QERGDATH	CHAR	2	0	Planned Results Data Origin	*
62	EEANTVERF	QEANTVERF	QEANTVERF	CHAR	2	0	Fraction Calculation	*
63	QDYNREGEL	QDYNREGEL	QDYNREGEL	CHAR	3	0	Dynamic Modification Rule	*
64	DYNMERKREF	QMERKDYN	QMERKNRP	NUMC	4	0	Characteristic (in Plan) whose Q-Level Will Be Copied
65	PZLFH	QPZLFH	PZLFH	NUMC	8	0	Assigned Test Equipment
66	CODEGRQUAL	QCODEGRPQL	QCODEGRP	CHAR	8	0	Defect Code Group for General Rejection	*
67	CODEQUAL	QCODEQL	QCODE	CHAR	4	0	Defect Code for Rejection: General	*
68	SPCKRIT	QSPCKRIT	QSPCKRIT	CHAR	3	0	SPC Criterion	*
69	RES_PLAN	QP_RESPLAN	QP_RESPLAN	CHAR	3	0	Response Plan	*
70	CTRMETH	QP_CTRMETH	QP_CTRMETH	CHAR	3	0	Control Method	*
71	PLNAL	PLNAL	ALTNR	CHAR	2	0	Group Counter
72	PLNFL	PLNFOLGE	PLNFOLGE	CHAR	6	0	Sequence
73	VORNR	VORNR	VORNR	CHAR	4	0	Operation/Activity Number
74	VPLTY	VPLNTY	PLNTY	CHAR	1	0	Type of the referenced task list	*
75	VPLNR	VPLNNR	PLNNR	CHAR	8	0	Group of the referenced task list
76	VPLAL	VPLNAL	ALTNR	CHAR	2	0	Group counter of the referenced task list
77	IDENT	OPRID	CHAR8	CHAR	8	0	Operation ID
78	DATUB	DATUB	DATUM	DATS	8	0	Valid-to date
79	AENNR_AUS	CPCS_ECN_TO	AENNR	CHAR	12	0	To change number	*
80	QUANTITAT	QKZQUNMK	QKZ	CHAR	1	0	Quantitative Characteristic
81	MESSWERTE	QKZQUMK	QKZ	CHAR	1	0	Measured Values Must Be Recorded
82	PRUEFKAT	QKZPKAT	QKZ	CHAR	1	0	Reference to Characteristic Attribute Required
83	TOLEROBEN	QKZTOLOB	QKZ	CHAR	1	0	Upper Specification Limit
84	TOLERUNTEN	QKZTOLUN	QKZ	CHAR	1	0	Lower Specification Limit
85	SOLLPRUEF	QKZSOLLPR	QKZ	CHAR	1	0	Check Target Value
86	LZEITKZ	QLZEITKZ	QKZ	CHAR	1	0	Long-Term Inspection
87	ESTUKZ	QESTUKZ	QESTUKZ	CHAR	1	0	Recording Type
88	ADDPRO	QADDPRO	QKZ	CHAR	1	0	Sample Quantity Is Added
89	ZERSTPRF	QKZDESTROY	QKZ	CHAR	1	0	Destructive Inspection
90	FORMELMK	QKZFORMEL	QKZFORMEL	CHAR	1	0	Calculated Characteristic
91	AUSSLOS	QAUSSLOS	QKZ	CHAR	1	0	Characteristic Relevant for Qual. Score and Scrap Share
92	FIXIERT	QNAENDKZ	QKZ	CHAR	1	0	Default Control Indicators Cannot Be Changed
93	BEWFHLZHL	QBFHLZHL	QKZ	CHAR	1	0	Recording the Number of Defects
94	FEHLREC	QFEHLREC	QKZ	CHAR	1	0	Defects Recording Automatically Called Up
95	AENDBELEG	QKZAENBEL	QKZ	CHAR	1	0	Create Change Documents During Results Recording
96	MATKZ	QMATKZ	QKZ	CHAR	1	0	Material Considered for Dynamic Modification
97	LIEFKZ	QLIFKZ	QKZ	CHAR	1	0	Vendor Considered for Dynamic Modification
98	HERSTKZ	QHERSTKZ	QKZ	CHAR	1	0	Manufacturer Considered for Dynamic Modification
99	KUNDKZ	QKUNDKZ	QKZ	CHAR	1	0	Customer Considered for Dynamic Modification
100	VSTEUERKZ	QSTEUERKZ	QSTEUKEY	CHAR	4	0	Key Containing Preset Characteristic Control Indicators	*
101	PSNFH	PSNFH	PSNFH	NUMC	4	0	Item Number for Production Resource/Tool
102	FHMNR	FHMNR	FHMNR	CHAR	33	0	Production resource/tool number
103	KZUMFS	QKZUMFS	QKZUMFS	CHAR	1	0	Multiple Samples
104	ATINN	ATINN	ATINN	NUMC	10	0	Internal characteristic	*
105	ATNAM	QATNAM	ATNAM	CHAR	30	0	Name of the Class Characteristic
106	QDYNHEAD	QDYNHEAD	QDYNHEAD	CHAR	1	0	Level at Which Dynamic Modification Parameters Are Defined	*
107	TXTZ1	TXTZ1	TEXT40	CHAR	40	0	First line of text for production resources/tools
108	STICHPRTXT	QTXTSMPPRO	QKURZTEXT	CHAR	40	0	Short Text for the Sampling Procedure
109	MASTERCTXT	QTXT_CHA	QKURZTEXT	CHAR	40	0	Short Text for Inspection Characteristic
110	STELLEN	QSTELLEN	QSTELLEN	INT1	3	0	Number of Places to the Right of a Decimal Point (Accuracy)
111	MASSEINHSW	QMGEH6	MSEC6	CHAR	6	0	Measurement Unit in Which Quantitative Data Is Maintained	*
112	SOLLWERT	QSOLLWERTC	QSOLLWERTC	CHAR	16	0	Target Value for a Quantitative Characteristic
113	TOLERANZOB	QTOLOBC	QSOLLWERTC	CHAR	16	0	Upper Specification Limit
114	TOLERANZUN	QTOLUNC	QSOLLWERTC	CHAR	16	0	Lower Specification Limit
115	TOLERWEIOB	QTOLWOBC	QSOLLWERTC	CHAR	16	0	Change to Upper Specification Limit
116	TOLERWEIUN	QTOLWUNC	QSOLLWERTC	CHAR	16	0	Change to Lower Specification Limit
117	KLASBREITE	QKLASSBRC	QSOLLWERTC	CHAR	16	0	Class Width
118	KLASMITTE	QKLASMITC	QSOLLWERTC	CHAR	16	0	Class Midpoint
119	GRENZEOB1	QGRENZO1C	QSOLLWERTC	CHAR	16	0	First Upper Specification Limit
120	GRENZEUN1	QGRENZU1C	QSOLLWERTC	CHAR	16	0	First Lower Specification Limit
121	GRENZEOB2	QGRENZO2C	QSOLLWERTC	CHAR	16	0	Second Upper Specification Limit
122	GRENZEUN2	QGRENZU2C	QSOLLWERTC	CHAR	16	0	Second Lower Specification Limit
123	PLAUSIOBEN	QPLAUSIOBC	QSOLLWERTC	CHAR	16	0	Upper Plausibility Limit
124	PLAUSIUNTE	QPLAUSIUNC	QSOLLWERTC	CHAR	16	0	Lower Plausibility Limit
125	CHV_LINK	CHV_LINK	SYCHAR132	CHAR	132	0	Dependent Characteristic Specifications Exist
126	QUALITAT	QKZQULMK	QKZ	CHAR	1	0	Qualitative Characteristic
127	QPMT_KTEXT	QTXTMETHOD	QKURZTEXT	CHAR	40	0	Short Text for Inspection Method
128	DYNREGTXT	QTXTDYNRUL	QKURZTEXT	CHAR	40	0	Short Text for the Dynamic Modification Rule
129	SPCTXT	QTXTSPC_CR	QKURZTEXT	CHAR	40	0	Short Text for the SPC Criterion
130	ATTRIBUTES_TEXT	TEXT132	TEXT132	CHAR	132	0	Text (length 132)
131	PS_LANGTEXT			LCHR	4000	0