SAP ABAP Data Element - Index Q, page 8
Data Element - Q
# | Data Element | Short Description | Domain | Data Type |
---|---|---|---|---|
![]() |
![]() |
![]() |
![]() |
![]() |
1 | ![]() |
Valuate on Enter | ![]() |
CHAR |
2 | ![]() |
Valuation of Object | ![]() |
CHAR |
3 | ![]() |
Variance | ![]() |
CHAR |
4 | ![]() |
Variant of The Inspection Lot Origin | ![]() |
CHAR |
5 | ![]() |
Dispersion (Variance) of Valid Measured Values | ![]() |
FLTP |
6 | ![]() |
Dispersion (Variance) of Valid Measured Values | ![]() |
CHAR |
7 | ![]() |
Indicator: Change Authorization for Posting to Unrest. Stock | ![]() |
CHAR |
8 | ![]() |
Change Authorization for Posting to Scrap | ![]() |
CHAR |
9 | ![]() |
Change Authorization for Posting to Sample Usage | ![]() |
CHAR |
10 | ![]() |
Change Authorization for Posting to Blocked Stock | ![]() |
CHAR |
11 | ![]() |
Change Authorization for Posting to Reserves | ![]() |
CHAR |
12 | ![]() |
Change Authorization for Posting to Different Material | ![]() |
CHAR |
13 | ![]() |
Change Authorization for Return Posting to Vendor | ![]() |
CHAR |
14 | ![]() |
Change Authorization for Posting Other Quantity | ![]() |
CHAR |
15 | ![]() |
Change Authorization for Posting Other Quantity (2) | ![]() |
CHAR |
16 | ![]() |
UD Valuation Description | ![]() |
CHAR |
17 | ![]() |
Usage Decision Code | ![]() |
CHAR |
18 | ![]() |
Code for Automatic Usage Decision | ![]() |
CHAR |
19 | ![]() |
Date of Code Used for Usage Decision | ![]() |
DATS |
20 | ![]() |
Date of code used for usage decision (batch input) | ![]() |
CHAR |
21 | ![]() |
Code Group for Automatic Usage Decision | ![]() |
CHAR |
22 | ![]() |
Selected Set for Usage Decision | ![]() |
CHAR |
23 | ![]() |
Reduced No. of Samples for Characteristic Summarization | ![]() |
CHAR |
24 | ![]() |
QM: Usage decision must be made | ![]() |
CHAR |
25 | ![]() |
Sampling Procedure | ![]() |
CHAR |
26 | ![]() |
Lieferantennummer | ![]() |
NUMC |
27 | ![]() |
Key Date for Version Selection | ![]() |
DATS |
28 | ![]() |
Version No. of the Sample-Drawing Procedure | ![]() |
CHAR |
29 | ![]() |
Version Number | ![]() |
CHAR |
30 | ![]() |
Version Number of the First Assigned Entry | ![]() |
CHAR |
31 | ![]() |
Version Number of the Second Assigned Entry | ![]() |
CHAR |
32 | ![]() |
Version Number of the Third Assigned Entry | ![]() |
CHAR |
33 | ![]() |
Version Number of the Fourth Assigned Entry | ![]() |
CHAR |
34 | ![]() |
Version Number of the Fifth Assigned Entry | ![]() |
CHAR |
35 | ![]() |
Version Number of the Selected Set Record | ![]() |
CHAR |
36 | ![]() |
Version Number of the Code Record | ![]() |
CHAR |
37 | ![]() |
Version Number of the Code Group Record | ![]() |
CHAR |
38 | ![]() |
Version Number of the Master Inspection Characteristic | ![]() |
CHAR |
39 | ![]() |
Version number of the master inspection characteristic | ![]() |
CHAR |
40 | ![]() |
Version Number of the Inspection Method | ![]() |
CHAR |
41 | ![]() |
Version number of the inspection method | ![]() |
CHAR |
42 | ![]() |
Version Number for the Inspection Method Text (QM) | ![]() |
CHAR |
43 | ![]() |
Version Number for the Inspection Method Text (QM) | ![]() |
CHAR |
44 | ![]() |
New Inspection Stage if Not OK | ![]() |
NUMC |
45 | ![]() |
Selection of Master Inspection Characs for All Versions | ![]() |
CHAR |
46 | ![]() |
Version Number of the Selected Set Record | ![]() |
CHAR |
47 | ![]() |
Data Record is Being Used | ![]() |
CHAR |
48 | ![]() |
Evaluation of Reference Operation Set | ![]() |
CHAR |
49 | ![]() |
Indicator: Quality Score Class Is Used | ![]() |
CHAR |
50 | ![]() |
Code Version Used for an Automatic Usage Decision | ![]() |
CHAR |
51 | ![]() |
Plant of Selected Set for Automatic Usage Decision | ![]() |
CHAR |
52 | ![]() |
Counter for Usage Decision | ![]() |
CHAR |
53 | ![]() |
Time when Usage Decision Changed | ![]() |
TIMS |
54 | ![]() |
Time when Usage Decision Was Recorded | ![]() |
TIMS |
55 | ![]() |
Time of Usage Decision Recording (UTC Time Stamp) | ![]() |
DEC |
56 | ![]() |
Code Group of the Usage Decision | ![]() |
CHAR |
57 | ![]() |
Scaling line | ![]() |
CHAR |
58 | ![]() |
Quantity and Demand Check Active | ![]() |
CHAR |
59 | ![]() |
Quantity Is or Was in Inspection Stock | ![]() |
CHAR |
60 | ![]() |
Window for Stock Postings Processed in the Background | ![]() |
CHAR |
61 | ![]() |
Monitor Control for Inspection Lots in Worklist | ![]() |
CHAR |
62 | ![]() |
Selected Set of the Usage Decision | ![]() |
CHAR |
63 | ![]() |
Quantity that Is To Be Posted to Unrestricted-Use Stock | ![]() |
QUAN |
64 | ![]() |
Quantity that Is To Be Posted to Scrap | ![]() |
QUAN |
65 | ![]() |
Quantity To Be Posted to Sample Usage | ![]() |
QUAN |
66 | ![]() |
Quantity that Is Posted to Blocked Stock | ![]() |
QUAN |
67 | ![]() |
Quantity that Is Posted to Reserve Samples | ![]() |
QUAN |
68 | ![]() |
Quantity that Is Posted to a New Material | ![]() |
QUAN |
69 | ![]() |
Quantity that Is To Be Returned to Vendor | ![]() |
QUAN |
70 | ![]() |
Quantity that Is To Be Posted as Other Quantity | ![]() |
QUAN |
71 | ![]() |
Quantity that Is To Be Posted as Other Quantity (2) | ![]() |
QUAN |
72 | ![]() |
Assignment Level of Defects (Insp.Lot, Operation, Charac.) | ![]() |
CHAR |
73 | ![]() |
Version of the Master Inspection Characteristic | ![]() |
CHAR |
74 | ![]() |
Person who Made the Usage Decision | ![]() |
CHAR |
75 | ![]() |
Copy Model/Reference Characteristic | ![]() |
CHAR |
76 | ![]() |
Copy Model/Reference Characteristic | ![]() |
CHAR |
77 | ![]() |
Text Field: From | ![]() |
CHAR |
78 | ![]() |
Specifications Can Be Changed | ![]() |
CHAR |
79 | ![]() |
Current Operation Number | ![]() |
NUMC |
80 | ![]() |
Lot Creation Lead Time (in Days) for Source Inspection | ![]() |
INT1 |
81 | ![]() |
Text Line for Additional Information | ![]() |
CHAR |
82 | ![]() |
Certificate Profile Number | ![]() |
CHAR |
83 | ![]() |
Enterprise Search: Certificate Profile External Number | CHAR | |
84 | ![]() |
Operation Number | ![]() |
CHAR |
85 | ![]() |
Operation Number in the Quality Level | ![]() |
CHAR |
86 | ![]() |
Upper Limit for an Inspection Operation Interval | ![]() |
CHAR |
87 | ![]() |
Lower Limit for an Inspection Operation Interval | ![]() |
CHAR |
88 | ![]() |
Sampling Method (Proposal) | ![]() |
CHAR |
89 | ![]() |
Code for Party Responsible | ![]() |
CHAR |
90 | ![]() |
Code Group - Party Responsible | ![]() |
CHAR |
91 | ![]() |
Catalog Type - Party Responsible | ![]() |
CHAR |
92 | ![]() |
Certificate Required for Each Purchase Order Item | ![]() |
CHAR |
93 | ![]() |
1 Point Outside Action Limits | ![]() |
CHAR |
94 | ![]() |
2 of 3 Outside 2/3 of Action Limits | ![]() |
CHAR |
95 | ![]() |
4 of 5 Outside 1/3 of Action Limits | ![]() |
CHAR |
96 | ![]() |
At Least 8 Points in a Row Above/Below Center Line | ![]() |
CHAR |
97 | ![]() |
15 Points in a Row in Center Third of Action Limits | ![]() |
CHAR |
98 | ![]() |
At Least 6 Points in a Row in Ascending/Descending Order | ![]() |
CHAR |
99 | ![]() |
Plant of the Assigned Selected Set | ![]() |
CHAR |
100 | ![]() |
Plant of the First Assigned Selected Set | ![]() |
CHAR |
101 | ![]() |
Plant of the Second Assigned Selected Set | ![]() |
CHAR |
102 | ![]() |
Plant of the Third Assigned Selected Set | ![]() |
CHAR |
103 | ![]() |
Plant of the Fourth Assigned Selected Set | ![]() |
CHAR |
104 | ![]() |
Plant of the Fifth Assigned Selected Set | ![]() |
CHAR |
105 | ![]() |
Upper Selection Limit for the Range of Plants | ![]() |
CHAR |
106 | ![]() |
Lower Selection Limit for the Range of Plants | ![]() |
CHAR |
107 | ![]() |
Plant for Work Center | ![]() |
CHAR |
108 | ![]() |
Plant of the Inspection Method | ![]() |
CHAR |
109 | ![]() |
Plant of the Inspection Method | ![]() |
CHAR |
110 | ![]() |
Plant | ![]() |
CHAR |
111 | ![]() |
Plant for Creating Material/Plan Assignmt in Inspection Plan | ![]() |
CHAR |
112 | ![]() |
Plant Where Stock for Inspection Lot Is Held | ![]() |
CHAR |
113 | ![]() |
Goods Receipt Is Blocked | ![]() |
CHAR |
114 | ![]() |
Start date for qualifying week | ![]() |
DATS |
115 | ![]() |
Reference Notification Number | ![]() |
CHAR |
116 | ![]() |
Extend Physical-Sample Drawing | ![]() |
CHAR |
117 | ![]() |
New Sample-Drawing Without Copy Model | ![]() |
CHAR |
118 | ![]() |
New Physical-Sample Drawing with Copy Model | ![]() |
CHAR |
119 | ![]() |
New Sample with Copy Model | ![]() |
CHAR |
120 | ![]() |
New Sample Without Copy Model | ![]() |
CHAR |
121 | ![]() |
Mean Value | ![]() |
FLTP |
122 | ![]() |
Mean of Single Values | ![]() |
FLTP |
123 | ![]() |
Mean Value of the Mean Values | ![]() |
FLTP |
124 | ![]() |
Seqntl Counter for Sampling Instructions in Sampling Scheme | ![]() |
INT2 |
125 | ![]() |
Plant for the Master Inspection Characteristic | ![]() |
CHAR |
126 | ![]() |
Sequential Counter for Different Quality Levels | ![]() |
INT4 |
127 | ![]() |
Plant of the master inspection characteristic | ![]() |
CHAR |
128 | ![]() |
Sequential Counter for Items in a Sampling Scheme | ![]() |
INT2 |
129 | ![]() |
Item Number in Sample-Drawing Procedure | ![]() |
NUMC |
130 | ![]() |
Source and target document | ![]() |
CHAR |
131 | ![]() |
Additional Data Is Available | ![]() |
CHAR |
132 | ![]() |
Old Line Number | ![]() |
NUMC |
133 | ![]() |
New Line Number | ![]() |
NUMC |
134 | ![]() |
Time at which data record was last changed | ![]() |
TIMS |
135 | ![]() |
Time at which partial lot was created | ![]() |
TIMS |
136 | ![]() |
Time at which data record was created | ![]() |
TIMS |
137 | ![]() |
Valid-To Date for The Batch Certificate | ![]() |
DATS |
138 | ![]() |
Certificate Required for Each Delivery | ![]() |
CHAR |
139 | ![]() |
Explicit Inspection of GR Certificate Necessary | ![]() |
CHAR |
140 | ![]() |
Certificate Required | ![]() |
CHAR |
141 | ![]() |
Certificate Type | ![]() |
CHAR |
142 | ![]() |
Number of Inspection Lots with Discontinued Inspections | ![]() |
INT4 |
143 | ![]() |
No. of activities | ![]() |
INT4 |
144 | ![]() |
Number of Accepted Inspection Lots (Including Skips) | ![]() |
INT4 |
145 | ![]() |
Process Capability Index (Cp value) | ![]() |
FLTP |
146 | ![]() |
Number of Notifications Completed on Schedule | ![]() |
INT4 |
147 | ![]() |
Number of Notifications Completed on Schedule | ![]() |
INT4 |
148 | ![]() |
Number of Model Inspection Lots | ![]() |
INT4 |
149 | ![]() |
No. of Defects | ![]() |
INT4 |
150 | ![]() |
Number of Defects | ![]() |
INT4 |
151 | ![]() |
No. of Defective Units To Be Inspected | ![]() |
INT4 |
152 | ![]() |
Number of Summarized Inspection Lots | ![]() |
INT4 |
153 | ![]() |
Number of Summarized Lots (Including Share of Scrap) | ![]() |
INT4 |
154 | ![]() |
Number of Summarized Inspection Lots (Lead Time) | ![]() |
INT4 |
155 | ![]() |
Number of Summarized Inspection Lots for Quality Score | ![]() |
INT4 |
156 | ![]() |
No. of Tasks with Status Completed | ![]() |
INT4 |
157 | ![]() |
Number of Tasks with Status 'Outstanding' or 'Released' | ![]() |
INT4 |
158 | ![]() |
No. of Tasks | ![]() |
INT4 |
159 | ![]() |
No. of Notifications | ![]() |
INT4 |
160 | ![]() |
No. of Tasks with Status Successful | ![]() |
INT4 |
161 | ![]() |
No. of Notifications with Status Being Processed | ![]() |
INT4 |
162 | ![]() |
No. of Notifications with Status Completed | ![]() |
INT4 |
163 | ![]() |
No. of Notifications with Status Outstanding | ![]() |
INT4 |
164 | ![]() |
No. of Notifications with Stauts Reset | ![]() |
INT4 |
165 | ![]() |
Number of Inspected and Closed Samples | ![]() |
INT4 |
166 | ![]() |
Number of Accepted Samples | ![]() |
INT4 |
167 | ![]() |
No. of Defects | ![]() |
INT4 |
168 | ![]() |
Number of Nonconforming Units | ![]() |
INT4 |
169 | ![]() |
No. of Samples with Major Defect as Defect Class | ![]() |
INT4 |
170 | ![]() |
No. of Samples with Critical Defect as Defect Class | ![]() |
INT4 |
171 | ![]() |
Number of Samples with Minor Defect as Defect Class | ![]() |
INT4 |
172 | ![]() |
Number of Rejected Samples | ![]() |
INT4 |
173 | ![]() |
Number of Skipped Samples | ![]() |
INT4 |
174 | ![]() |
Number of Valid Single Values | ![]() |
INT4 |
175 | ![]() |
Sample Size (No. of Valid Values in Sample) | ![]() |
INT4 |
176 | ![]() |
Number of Values Above Upper Tolerance | ![]() |
INT4 |
177 | ![]() |
Number of Values Below Lower Tolerance | ![]() |
INT4 |
178 | ![]() |
Number of Insp. Lots with Outstanding Long-Term Characs | ![]() |
INT4 |
179 | ![]() |
Problem Frequency | ![]() |
INT4 |
180 | ![]() |
No. of Problem Items | ![]() |
INT4 |
181 | ![]() |
Number of Rejected Inspection Lots | ![]() |
INT4 |
182 | ![]() |
Number of Summarized Inspection Lots (Without Cancellation) | ![]() |
INT4 |
183 | ![]() |
Number of Skipped Inspection Lots | ![]() |
INT4 |
184 | ![]() |
Number of Closed Physical Samples | ![]() |
INT4 |
185 | ![]() |
No. of Accepted Physical Samples | ![]() |
INT4 |
186 | ![]() |
No. of Rejected Physical Samples | ![]() |
INT4 |
187 | ![]() |
Number of Cancelled Inspection Lots | ![]() |
INT4 |
188 | ![]() |
Total of Sample Dispersions | ![]() |
FLTP |
189 | ![]() |
Total of Sample Variances | ![]() |
FLTP |
190 | ![]() |
Total of Single Value Variances | ![]() |
FLTP |
191 | ![]() |
No. of causes | ![]() |
INT4 |
192 | ![]() |
Number of inspection lots | ![]() |
INT4 |
193 | ![]() |
Number of accepted inspection lots (including skips) | ![]() |
INT4 |
194 | ![]() |
Number of rejected inspection lots | ![]() |
INT4 |
195 | ![]() |
Number of lots with skip | ![]() |
INT4 |
196 | ![]() |
Lower Limit of Copying Interval for Dependent Char. Specs | ![]() |
NUMC |
197 | ![]() |
Upper Limit of Copying Interval for Dependent Char. Specs | ![]() |
NUMC |
198 | ![]() |
Quantity that Is Still To Be Posted at the Usage Decision | ![]() |
CHAR |
199 | ![]() |
Quantity that Is Still To Be Posted at the Usage Decision | ![]() |
QUAN |
200 | ![]() |
Defect Class Allowed for Valuation 'A' | ![]() |
CHAR |
201 | ![]() |
Number for Dependent Characteristic Specifications | ![]() |
NUMC |
202 | ![]() |
No. for the Dependent Char. Specs (Batch Input) | ![]() |
CHAR |
203 | ![]() |
Number of Characteristics Recorded Additionally | ![]() |
INT2 |
204 | ![]() |
Defects Present/No Defects Present | ![]() |
CHAR |
205 | ![]() |
Current Batch Status | ![]() |
CHAR |
206 | ![]() |
Current Batch Status Not Released | ![]() |
CHAR |
207 | ![]() |
New Batch Status Unrestricted Use | ![]() |
CHAR |
208 | ![]() |
New Batch Status Restricted | ![]() |
CHAR |
209 | ![]() |
Change Number | ![]() |
CHAR |
210 | ![]() |
Background Processing of Stock Screen | ![]() |
CHAR |
211 | ![]() |
Stock Posting Proposal | ![]() |
CHAR |
212 | ![]() |
Certificate Required for Goods Receipt | ![]() |
CHAR |
213 | ![]() |
Information for Inspection Characteristic | ![]() |
CHAR |
214 | ![]() |
Internal Counter for DB Objects | ![]() |
NUMC |
215 | ![]() |
Function Module that Sets CUA Menu | ![]() |
CHAR |
216 | ![]() |
Date of Balance Sheet Preparation | ![]() |
DATS |
217 | ![]() |
Automatic Usage Decision for Completed Inspection Lots | ![]() |
CHAR |
218 | ![]() |
Take Long-Term Characs Into Account During Automatic UD | ![]() |
CHAR |
219 | ![]() |
Display the Order Number for the Inspection Lot | ![]() |
CHAR |
220 | ![]() |
Recurring Inspection: Block Batch at Lot Creation | ![]() |
CHAR |
221 | ![]() |
Recurring Inspection: Block Batch at Inspection Date | ![]() |
CHAR |
222 | ![]() |
Block Batch at Expiry Date | ![]() |
CHAR |
223 | ![]() |
Display the Batch Number for the Inspection Lot | ![]() |
CHAR |
224 | ![]() |
Display the Short Text for the Inspection Lot | ![]() |
CHAR |
225 | ![]() |
Display the Object Short Text for the Inspection Lot | ![]() |
CHAR |
226 | ![]() |
Display the Customer (Ship-To Party) | ![]() |
CHAR |
227 | ![]() |
Display Account Number for the Vendor | ![]() |
CHAR |
228 | ![]() |
Display the Material Number for the Inspection Lot | ![]() |
CHAR |
229 | ![]() |
Display the Material Document for the Inspection Lot | ![]() |
CHAR |
230 | ![]() |
Recurring Inspection: Lot Creation Only | ![]() |
CHAR |
231 | ![]() |
Recurring Inspection: To Inspection Stock at Lot Creation | ![]() |
CHAR |
232 | ![]() |
Recurring Inspection: To Inspection Stock at Inspection Date | ![]() |
CHAR |
233 | ![]() |
Automatic Usage Decision for Skipped Inspection Lots | ![]() |
CHAR |
234 | ![]() |
Opening Period (D) | NUMC | |
235 | ![]() |
Consider Long-Term Inspections | ![]() |
CHAR |
236 | ![]() |
Inspect Without Batch | ![]() |
CHAR |
237 | ![]() |
Maintained Qualifications | ![]() |
INT4 |
238 | ![]() |
Consider Material Assignment for Test Equipment | ![]() |
CHAR |
239 | ![]() |
Plant for Inspection Method | ![]() |
CHAR |
240 | ![]() |
Correct Quantity in Materials Management | ![]() |
CHAR |
241 | ![]() |
Field Name for Classification by Multiple Specification | ![]() |
CHAR |
242 | ![]() |
Indicator: Multiple Specifications | ![]() |
CHAR |
243 | ![]() |
Control of Object for Multiple Specifications | ![]() |
CHAR |
244 | ![]() |
Object for Multiple Specifications | ![]() |
CHAR |
245 | ![]() |
Type of Object for Multiple Specifications | ![]() |
CHAR |
246 | ![]() |
Ind.: Auto. UD for Insp. Lots W/o Batch Despite BtchManReq | ![]() |
CHAR |
247 | ![]() |
Worklist for Physical Samples Not Created | ![]() |
CHAR |
248 | ![]() |
Sales office (queueing) | ![]() |
CHAR |
249 | ![]() |
QM authorization for field control in header and operation | ![]() |
CHAR |
250 | ![]() |
Worklist Created for Physical Samples | ![]() |
CHAR |
251 | ![]() |
Change Required in Quality Info Record | ![]() |
CHAR |
252 | ![]() |
Source (Representative Material) for Costs Derived (EC-PCA) | ![]() |
CHAR |
253 | ![]() |
Inspection Lot Is Relevant to Stock | ![]() |
CHAR |
254 | ![]() |
Number of Evaluation Step | ![]() |
NUMC |
255 | ![]() |
Take into Acc. Test Equipment Assignment for Insp. Charac. | ![]() |
CHAR |
256 | ![]() |
Take into Account the Usage List for the Test Equipment | ![]() |
CHAR |
257 | ![]() |
Field Not Used as of 3.0 Field Reserved for SAP | ![]() |
CHAR |
258 | ![]() |
Field Not Used as of 3.0 Field Reserved for SAP | ![]() |
CHAR |
259 | ![]() |
Field Not Used Field Reserved for SAP | ![]() |
DATS |
260 | ![]() |
Initial Run in Days | NUMC | |
261 | ![]() |
Default for Next Inspection Point | ![]() |
CHAR |