SAP ABAP Message Class 5K (HR: Messages for Canada)
Basic Data
Hierarchy
☛
SAP_HRCCA (Software Component) Sub component SAP_HRCCA of SAP_HR
⤷
PA-PA-CA (Application Component) Canada
⤷
PB07 (Package) HR master data: Canada

⤷

⤷

Attributes
Message class | ![]() |
5K |
Short Description | ![]() |
HR: Messages for Canada |
Changed On | ![]() |
20130531 |
Last Changed At | ![]() |
125846 |
Messages
# | Message | Message Short Text | Documentation status | Authorization check |
---|---|---|---|---|
1 | ![]() |
& & & & | ||
2 | ![]() |
Social Insurance Number is invalid | Space: object requires documentation | |
3 | ![]() |
Social Insurance Number is not unique | Space: object requires documentation | |
4 | ![]() |
Age is not between 18 and 70 years - no eligibility for CPP/QPP | ||
5 | ![]() |
Enter commission remuneration & expense amounts | ||
6 | ![]() |
Postal code is invalid for province | Space: object requires documentation | |
7 | ![]() |
First 2 characters of short text not found in T005S | ||
8 | ![]() |
SIN consists of digits only | ||
9 | ![]() |
Unable to open SAPscript form & | Space: object requires documentation | |
10 | ![]() |
Job not found. Maintain this job in table T513 | Space: object requires documentation | |
11 | ![]() |
RCT/RQT number is missing for & & & & | ||
12 | ![]() |
Enter lieu of amount | ||
13 | ![]() |
Enter lieu of percent | ||
14 | ![]() |
UIC tax is not active | ||
15 | ![]() |
UIC annual tax formula activated | ||
16 | ![]() |
Tax authority not found | The short text describes the object sufficiently | |
17 | ![]() |
Tax authority not valid for subtype | ||
18 | ![]() |
Federal tax information should be added first (subtype 1) | ||
19 | ![]() |
Specify one amount or one percentage only | Space: object requires documentation | |
20 | ![]() |
Identical entries are not allowed | Space: object requires documentation | |
21 | ![]() |
Enter a tax authority or province code | Space: object requires documentation | |
22 | ![]() |
Enter either a formula number or an exemption indicator, but not both | Space: object requires documentation | |
23 | ![]() |
Enter a taxation period | Space: object requires documentation | |
24 | ![]() |
Unable to write SAPscript form & | ||
25 | ![]() |
Unable to close SAPscript form & | ||
26 | ![]() |
No shift schedule for time period & to & | ||
27 | ![]() |
No entry date found for personnel number & | ||
28 | ![]() |
Benefits modifier missing for & & & & | ||
29 | ![]() |
Unable to assign/output & data values to the form & | ||
30 | ![]() |
Must enter "T", "P" or "C" for run-type | Space: object requires documentation | |
31 | ![]() |
Postal code must consist of 6 characters (ANA NAN) | Space: object requires documentation | |
32 | ![]() |
Enter "Y" or "N" only | Space: object requires documentation | |
33 | ![]() |
& CPP basic exemption and rate not found; maintain via T5KTC | Space: object requires documentation | |
34 | ![]() |
& QPP basic exemption and rate not found; maintain via T5KTC | Space: object requires documentation | |
35 | ![]() |
EI employee premium rate for & not found; maintain via T5KTC | Space: object requires documentation | |
36 | ![]() |
EI employer premium rate for & not found; maintain via T5KTC | Space: object requires documentation | |
37 | ![]() |
Period modifier & not defined. Maintain this data in the IMG | Space: object requires documentation | |
38 | ![]() |
Tax entry & not found in table & for period &-& | ||
39 | ![]() |
& provincial data will be deleted | Space: object requires documentation | |
40 | ![]() |
Provincial data has not been reviewed | Space: object requires documentation | |
41 | ![]() |
Additional tax is not a multiple of five dollars | Space: object requires documentation | |
42 | ![]() |
Information has not been reviewed for Quebec | Space: object requires documentation | |
43 | ![]() |
Provincial data is not applicable | Space: object requires documentation | |
44 | ![]() |
Quebec information will be deleted | Space: object requires documentation | |
45 | ![]() |
Specify both estimated remuneration and expenses | Space: object requires documentation | |
46 | ![]() |
Taxation year is out of range (&..&) | ||
47 | ![]() |
Invalid return type code | ||
48 | ![]() |
Invalid data type code | ||
49 | ![]() |
Alpha portion of transmitter number is invalid | ||
50 | ![]() |
Numeric portion of transmitter number is out of range (000000..999999) | Space: object requires documentation | |
51 | ![]() |
Reference month is out of range (1..12) | Space: object requires documentation | |
52 | ![]() |
Reference month and year are out of range (&..&/&) | Space: object requires documentation | |
53 | ![]() |
Last pay period is either not closed or does not exist for &/& | ||
54 | ![]() |
Specify employee subgroup for & | Space: object requires documentation | |
55 | ![]() |
Pers. area/subarea &/& not found. Maintain this data in T001P | Space: object requires documentation | |
56 | ![]() |
Tax exemption indicators will be changed | Space: object requires documentation | |
57 | ![]() |
Production run already exists for &1 &2 for tax reporting unit &3 | Space: object requires documentation | |
58 | ![]() |
Production run for &1 &2 for tax unit reporting &3 filed | Space: object requires documentation | |
59 | ![]() |
Production run does not exist for &1 &2 for tax reporting unit &3 | Space: object requires documentation | |
60 | ![]() |
No corresponding run exists for &1 &2 for tax reporting unit &3 | Space: object requires documentation | |
61 | ![]() |
No data was selected to be displayed | Space: object requires documentation | |
62 | ![]() |
Select a valid run to process | Space: object requires documentation | |
63 | ![]() |
Select a print copy to output | Space: object requires documentation | |
64 | ![]() |
You have selected a runid &1 as a run parameter, but it will be ignored | Space: object requires documentation | |
65 | ![]() |
Invalid run type | Space: object requires documentation | |
66 | ![]() |
Select a form for processing | Space: object requires documentation | |
67 | ![]() |
Invalid configuration for table &1 for tax year &2 | Space: object requires documentation | |
68 | ![]() |
No valid SAPscript form assigned to tax form &1 for tax year &2 | Space: object requires documentation | |
69 | ![]() |
Production run not filed for &1 &2 for tax reporting unit &3 | Space: object requires documentation | |
70 | ![]() |
No personnel number selection allowed with the selected run parameters | Space: object requires documentation | |
71 | ![]() |
No employees were selected for possible amendments | Space: object requires documentation | |
72 | ![]() |
Amendment/Cancelled run not filed for &1 &2 for tax unit reporting &3 | Space: object requires documentation | |
73 | ![]() |
No run information available for run &1 | Space: object requires documentation | |
74 | ![]() |
Unable to create new run | Space: object requires documentation | |
75 | ![]() |
Unable to set status (&1) for run &2 | Space: object requires documentation | |
76 | ![]() |
Unable to set attribute (&1: &2) for run &3 | Space: object requires documentation | |
77 | ![]() |
Insert a blank disk into the drive | Space: object requires documentation | |
78 | ![]() |
Cannot write file &1. Insert a blank disk into the drive to continue | Space: object requires documentation | |
79 | ![]() |
Magnetic Media Filing is indicated, but no TemSe file will be created | Space: object requires documentation | |
80 | ![]() |
TemSe file does not match standard format | Space: object requires documentation | |
81 | ![]() |
Cluster extraction error: &1 &2 &3 | Space: object requires documentation | |
82 | ![]() |
No relevant data found in T512E | Space: object requires documentation | |
83 | ![]() |
Personnel area &1 not found in T500P | Space: object requires documentation | |
84 | ![]() |
Employer data from &1 to &2 not found in P0001 | Space: object requires documentation | |
85 | ![]() |
Company code &1 not found in T001 | Space: object requires documentation | |
86 | ![]() |
Error accessing data from T5KTC | Space: object requires documentation | |
87 | ![]() |
Valid transmitter numbers for T4 and T4A must begin with "MM" | Space: object requires documentation | |
88 | ![]() |
Insert a blank, formatted disk into the &1 drive | Space: object requires documentation | |
89 | ![]() |
Label the floppy "Disk &1 of &2" | Space: object requires documentation | |
90 | ![]() |
Impact printing is not available for RL-1 / RL-2 | Space: object requires documentation | |
91 | ![]() |
MRQ form number required for Magnetic Media Filing | Space: object requires documentation | |
92 | ![]() |
Invalid length for MRQ form number | Space: object requires documentation | |
93 | ![]() |
"Number of slips per summary" must lie between 1 and 10,000 | Space: object requires documentation | |
94 | ![]() |
Employee &1 has invalid SIN number "000 000 000" | Space: object requires documentation | |
95 | ![]() |
Specify a payroll area | Space: object requires documentation | |
96 | ![]() |
Magnetic Media file was not saved properly | Space: object requires documentation | |
97 | ![]() |
TemSe filename has not been provided, or is not of the correct format | Space: object requires documentation | |
98 | ![]() |
Valid Relevé transmitter numbers must begin with "NP" | Space: object requires documentation | |
99 | ![]() |
No existing values were found for this field | Space: object requires documentation | |
100 | ![]() |
Error retrieving F4 values | Space: object requires documentation | |
101 | ![]() |
File destination not found: &1 | Space: object requires documentation | |
102 | ![]() |
SAP form number required when printing with SAP tax forms | Space: object requires documentation | |
103 | ![]() |
TemSe file was created, filename: & | Space: object requires documentation | |
104 | ![]() |
No values available for the specified adjustment date | Space: object requires documentation | |
105 | ![]() |
Specified combination not allowed | Space: object requires documentation | |
106 | ![]() |
Select an option | Space: object requires documentation | |
107 | ![]() |
Cannot append results to run &1. Run has been filed or voided | Space: object requires documentation | |
108 | ![]() |
Invalid file source &1 | Space: object requires documentation | |
109 | ![]() |
Invalid Magnetic Media form type | Space: object requires documentation | |
110 | ![]() |
Enter a correction date | Space: object requires documentation | |
111 | ![]() |
&1 forms for &2 employees were processed for run &3 | Space: object requires documentation | |
112 | ![]() |
No overlaps between the T4 and T4A were found for this selection | Space: object requires documentation | |
113 | ![]() |
Cannot open TemSe file &1 | Space: object requires documentation | |
114 | ![]() |
& provincial total credits amount is 0. Verify that this is correct | Space: object requires documentation | |
115 | ![]() |
& provincial total credits will be updated | Space: object requires documentation | |
116 | ![]() |
Provincial total credits for &1 not found in &2 | Space: object requires documentation | |
117 | ![]() |
Prov.of employment has been changed. Verify Prov.of residence & | Space: object requires documentation | |
118 | ![]() |
Disk creation successful. File path: &1 | Space: object requires documentation | |
119 | ![]() |
Enter a valid tax year | Space: object requires documentation | |
120 | ![]() |
Select a Magnetic Media file to read from | Space: object requires documentation | |
121 | ![]() |
Select a TemSe file to generate Magnetic Media data | Space: object requires documentation | |
122 | ![]() |
Enter a transmitter number | Space: object requires documentation | |
123 | ![]() |
Enter a transmitter name | Space: object requires documentation | |
124 | ![]() |
Enter a transmitter address | Space: object requires documentation | |
125 | ![]() |
Enter a transmitter city | Space: object requires documentation | |
126 | ![]() |
Enter a transmitter province | Space: object requires documentation | |
127 | ![]() |
Enter a transmitter country | Space: object requires documentation | |
128 | ![]() |
Enter a transmitter postal code | Space: object requires documentation | |
129 | ![]() |
Enter a technical contact name | Space: object requires documentation | |
130 | ![]() |
Enter a technical contact phone number with area code | Space: object requires documentation | |
131 | ![]() |
Enter an accounting contact name | Space: object requires documentation | |
132 | ![]() |
Enter an accounting contact phone number with area code | Space: object requires documentation | |
133 | ![]() |
Select a form for processing | Space: object requires documentation | |
134 | ![]() |
Choose 'E' for English or 'F' for French | Space: object requires documentation | |
135 | ![]() |
Choose 'F' for French or 'A' for English | Space: object requires documentation | |
136 | ![]() |
Insert Magnetic Media disk &1 of &2 | Space: object requires documentation | |
137 | ![]() |
Invalid WCB Business Number; check your entry | Space: object requires documentation | |
138 | ![]() |
Enter the WCB Business Number | Space: object requires documentation | |
139 | ![]() |
WCB Business Number will be cleared | Space: object requires documentation | |
140 | ![]() |
Please enter a reference date for tax data display | Space: object requires documentation | |
141 | ![]() |
Number Range Interval RP_CBSID not valid for Company code &1 | Space: object requires documentation | |
142 | ![]() |
Error in TemSe database; TemSe file was not created | Space: object requires documentation | |
143 | ![]() |
Error while opening TemSe file &1 | Space: object requires documentation | |
144 | ![]() |
Error while reading TemSe file &1 | Space: object requires documentation | |
145 | ![]() |
Error while closing TemSe file &1 | Space: object requires documentation | |
146 | ![]() |
You are not authorized to write &1 | Space: object requires documentation | |
147 | ![]() |
You are not authorized to read &1 | Space: object requires documentation | |
148 | ![]() |
Invalid designated group value | Space: object requires documentation | |
149 | ![]() |
The XML file is empty | The short text describes the object sufficiently | |
150 | ![]() |
Another ROE is already being processed for this employee in Run ID &1 | Space: object requires documentation | |
151 | ![]() |
You cannot amend ROE forms with Run ID 0 | Space: object requires documentation | |
152 | ![]() |
Entry &1 not found in table &2 | Space: object requires documentation | |
153 | ![]() |
Select Run ID to &1 | Space: object requires documentation | |
154 | ![]() |
Error updating table &1 | Space: object requires documentation | |
155 | ![]() |
Error retrieving employee's final pay period information | Space: object requires documentation | |
156 | ![]() |
ROE Serial No. &1 already issued for the period from &2 to &3 | Space: object requires documentation | |
157 | ![]() |
Reporting period from &1 to &2 is invalid | Space: object requires documentation | |
158 | ![]() |
Overlapping ROEs detected for ROE period from &1 to &2 | Space: object requires documentation | |
159 | ![]() |
Error locating Run ID &1 in table &2 | Space: object requires documentation | |
160 | ![]() |
Pay period type &1 not supported for ROE | Space: object requires documentation | |
161 | ![]() |
Invalid Other Monies Code &1 will not be reported | Space: object requires documentation | |
162 | ![]() |
ROE logical file path and file name have not been defined | Space: object requires documentation | |
163 | ![]() |
The Expected Date Of Recall was set to default value &1 | Space: object requires documentation | |
164 | ![]() |
No employees valid for processing in Run ID &1 | Space: object requires documentation | |
165 | ![]() |
Employee number &1 not valid for processing | Space: object requires documentation | |
166 | ![]() |
Error retrieving employee ROE data from PCL4 | Space: object requires documentation | |
167 | ![]() |
Error writing employee ROE data to PCL4 | Space: object requires documentation | |
168 | ![]() |
No name format configured for Contact Person | Space: object requires documentation | |
169 | ![]() |
No ROE records formatted for export | Space: object requires documentation | |
170 | ![]() |
File download error | Space: object requires documentation | |
171 | ![]() |
File upload error | Space: object requires documentation | |
172 | ![]() |
HRSDC Laser Print application not launched automatically | Space: object requires documentation | |
173 | ![]() |
No. of exported employees does not match no. of records in import file | Space: object requires documentation | |
174 | ![]() |
Incorrect or corrupted import file | Space: object requires documentation | |
175 | ![]() |
ROE serial number &1 already used | Space: object requires documentation | |
176 | ![]() |
No valid ROE Serial Number was returned from HRSDC | Space: object requires documentation | |
177 | ![]() |
Run ID &1: Test import - no records updated | Space: object requires documentation | |
178 | ![]() |
Select an entry to void | Space: object requires documentation | |
179 | ![]() |
Run &1 status must be set to void | Space: object requires documentation | |
180 | ![]() |
Run ID &1 with personnel number &2 status &3 cannot be deleted | Space: object requires documentation | |
181 | ![]() |
Status of Run ID &1 invalid for import | Space: object requires documentation | |
182 | ![]() |
Background processing only permitted with Application server | Space: object requires documentation | |
183 | ![]() |
Error retrieving payroll result in sequence number &1 | Space: object requires documentation | |
184 | ![]() |
Run ID &1 status not updated. &2 | Space: object requires documentation | |
185 | ![]() |
Run ID &1 set to status &2 | Space: object requires documentation | |
186 | ![]() |
ROE amended successfully. Original ROE with S/N# &1 has been voided. | Space: object requires documentation | |
187 | ![]() |
HRSDC software attributes not configured | Space: object requires documentation | |
188 | ![]() |
No ROE will be generated for the selection period from &1 to &2 | Space: object requires documentation | |
189 | ![]() |
Amended ROE not required for the selection period from &1 to &2 | Space: object requires documentation | |
190 | ![]() |
Data missing from ROE Block &1 | Space: object requires documentation | |
191 | ![]() |
Status of Run Id set to EXPORTED. | Space: object requires documentation | |
192 | ![]() |
Run id &1 cannot be voided as amendment runs exist | Space: object requires documentation | |
193 | ![]() |
Maintain 3 char ISO code for country &1 in table T005 or feature 07ISO.&2 | Space: object requires documentation | |
194 | ![]() |
Address in Infotype 0006 longer than specification for employee &1. | Space: object requires documentation | |
195 | ![]() |
Errors were encountered while processing. Check spool for list of errors. | The short text describes the object sufficiently | |
196 | ![]() |
Errors were encountered while processing. Check the Error List. | Space: object requires documentation | |
197 | ![]() |
Box 8: Web ROE with SIN 000-000-000 will be rejected by HRSDC | Space: object requires documentation | |
198 | ![]() |
Street/House number for Business No. &1 longer than specification | The short text describes the object sufficiently | |
199 | ![]() |
Employer Name &1 for Business No. &2, longer than specification | The short text describes the object sufficiently | |
200 | ![]() |
An error occurred with the RFC destination | Space: object requires documentation | |
201 | ![]() |
The specified target year cannot precede the source year | Space: object requires documentation | |
202 | ![]() |
Due to errors during database update, no changes were made | Space: object requires documentation | |
203 | ![]() |
Tax form &1 for year &2 does not exist | Space: object requires documentation | |
204 | ![]() |
Enter a valid postal code | Space: object requires documentation | |
205 | ![]() |
&1 forms for &2 employees were processed for Production run &3. | Space: object requires documentation | |
206 | ![]() |
&1 forms for &2 employees were processed for Amendment run &3. | Space: object requires documentation | |
207 | ![]() |
&1 forms for &2 employees were processed for Cancelled run &3. | Space: object requires documentation | |
208 | ![]() |
&4 - Basic personal amount not found in T511K and cannot be defaulted | Space: object requires documentation | |
209 | ![]() |
Main Contract is either empty or invalid | Space: object requires documentation | |
210 | ![]() |
Tax authorities &1 not maintained. Default tax authorities were entered | Space: object requires documentation | |
211 | ![]() |
Corresponding infotype record must exist for the entire period | Space: object requires documentation | |
212 | ![]() |
Existing record will be updated with CMA code &3 | Space: object requires documentation | |
213 | ![]() |
Create new record with CMA code &3 | Space: object requires documentation | |
214 | ![]() |
Create new record without CMA code | Space: object requires documentation | |
215 | ![]() |
No update required. Infotype 0224 does not contain a CMA code | Space: object requires documentation | |
216 | ![]() |
Record(s) committed to database | Space: object requires documentation | |
217 | ![]() |
Test mode - record(s) not committed to database | Space: object requires documentation | |
218 | ![]() |
TemSe object & already exists. Object has not been created | Space: object requires documentation | |
219 | ![]() |
Error inserting new records into database table PA0077; old records lost | Space: object requires documentation | |
220 | ![]() |
Total non-indexed amount cannot exceed total credit amount | Space: object requires documentation | |
221 | ![]() |
Tax formula will be defaulted to Option 1 | Space: object requires documentation | |
222 | ![]() |
No data stored in the selected period | Space: object requires documentation | |
223 | ![]() |
Data record has grouping value "&1" instead of "&2" | Space: object requires documentation | |
224 | ![]() |
&1 is missing for the Main Personnel Assignment "&2" | Space: object requires documentation | |
225 | ![]() |
Payroll not run for the employee &1. No form generated. | The short text describes the object sufficiently | |
226 | ![]() |
Status for Payroll Area &1 is not set to EXIT. No form generated. | The short text describes the object sufficiently | |
227 | ![]() |
Payroll results could not be retrieved for employee number &1. | The short text describes the object sufficiently | |
228 | ![]() |
&1 rejected assigned to Business number &2 and &3 province(-ve Box value) | Space: object requires documentation | |
229 | ![]() |
Amendments for Laser ROE forms not allowed | Space: object requires documentation | |
230 | ![]() |
Initial Run had Tax Reporting Unit, Enter Tax Reporting Unit | The short text describes the object sufficiently | |
231 | ![]() |
Space: object requires documentation | ||
232 | ![]() |
Space: object requires documentation | ||
233 | ![]() |
Tax calculation is not supported for date specified | Space: object requires documentation | |
234 | ![]() |
You cannot assign tax indicator R to tax authority QRES | Space: object requires documentation | |
235 | ![]() |
Country Name not maintained in table T005T. & will be used instead. | The short text describes the object sufficiently | |
236 | ![]() |
Error while opening file &1&2&3 | Space: object requires documentation | |
237 | ![]() |
Cannot create logical document reference for XML schema &1 | Space: object requires documentation | |
238 | ![]() |
Data does not exist in PCL4 for run id &1 | Space: object requires documentation | |
239 | ![]() |
Data does not exist in PCL4 for employee &1 and run id &2 | Space: object requires documentation | |
240 | ![]() |
Encoding &1 cannot be set for XML file | Space: object requires documentation | |
241 | ![]() |
Attribute &1 cannot be set for element &2 | Space: object requires documentation | |
242 | ![]() |
Error while converting data to XML | Space: object requires documentation | |
243 | ![]() |
Cannot create directory &1 | Space: object requires documentation | |
244 | ![]() |
Error while downloading file to &1&2&3 | Space: object requires documentation | |
245 | ![]() |
XML file has been downloaded to &1&2&3 | Space: object requires documentation | |
246 | ![]() |
Cannot create root element &1 for XML file &2 | Space: object requires documentation | |
247 | ![]() |
Cannot create logical document reference for XML file &1 | Space: object requires documentation | |
248 | ![]() |
Cannot determine root element for XML schema &1 | Space: object requires documentation | |
249 | ![]() |
Test run successfully completed; database has not changed | Space: object requires documentation | |
250 | ![]() |
Enter a valid transmitter number (format MMNNNNNN); for example, MM888888 | Space: object requires documentation | |
251 | ![]() |
Enter a valid province, territory or state; for example, QC, YT, NY or ZZ | Space: object requires documentation | |
252 | ![]() |
Enter a valid three-letter transmitter country code; for example, CAN | Space: object requires documentation | |
253 | ![]() |
Enter transm. province code ZZ; transmitter country is not Canada or USA | Space: object requires documentation | |
254 | ![]() |
Download file path was not specified. Cannot download the file | The short text describes the object sufficiently | |
255 | ![]() |
Due to incompatible frontend platform, XML file validation has terminated | Space: object requires documentation | |
256 | ![]() |
Error occured while creating the validating file; Validation terminated | The short text describes the object sufficiently | |
257 | ![]() |
XML file validation completed; No errors found | The short text describes the object sufficiently | |
258 | ![]() |
XML file validation completed; XML file contains errors | Space: object requires documentation | |
259 | ![]() |
Due to incompatible application server platform,validation has terminated | Space: object requires documentation | |
260 | ![]() |
XML file stored on an incompatile platform, validation has terminated | The short text describes the object sufficiently | |
261 | ![]() |
XML schema stored on an incompatile platform, validation has terminated | The short text describes the object sufficiently | |
262 | ![]() |
Enter a valid transmitter number (format NPVVVVVV); for example, NP888888 | Space: object requires documentation | |
263 | ![]() |
Footnote overflow, please note the pernr. | The short text describes the object sufficiently | |
264 | ![]() |
***** 400 - 600: Reserved area for Canadian garnishment ***************** | ||
265 | ![]() |
Only one of those two fields may be entered | Space: object requires documentation | |
266 | ![]() |
Enter an operator | Space: object requires documentation | |
267 | ![]() |
Check the box in the special rule when using &1 | Space: object requires documentation | |
268 | ![]() |
Enter the unit in the special rule when making any entries | Space: object requires documentation | |
269 | ![]() |
Enter the field description in the special rule when using &1 | Space: object requires documentation | |
270 | ![]() |
Enter some operands | Space: object requires documentation | |
271 | ![]() |
Enter either a percentage and a unit or no percentage limit at all | Space: object requires documentation | |
272 | ![]() |
Enter either an amount and a unit or no amount limit at all | Space: object requires documentation | |
273 | ![]() |
Enter an amount per dependant | Space: object requires documentation | |
274 | ![]() |
Enter the missing limit | Space: object requires documentation | |
275 | ![]() |
Enter a relationship, since both limits are given | Space: object requires documentation | |
276 | ![]() |
Enter either a normal rule or a special rule, but not both | Space: object requires documentation | |
277 | ![]() |
Enter both the non-exempt amount model and the relationship model | Space: object requires documentation | |
278 | ![]() |
It is recommended to make the calculation rule a required entry | ||
279 | ![]() |
Make entries in all fields | Space: object requires documentation | |
280 | ![]() |
Select a debt with the debt category set to "garnishee fee" | Space: object requires documentation | |
281 | ![]() |
Enter a garnishee fee rule | Space: object requires documentation | |
282 | ![]() |
Enter the amount of the ongoing payment | Space: object requires documentation | |
283 | ![]() |
Enter the unit of the ongoing payment | Space: object requires documentation | |
284 | ![]() |
Ongoing payments should not be specified for one-time garnishments | Space: object requires documentation | |
285 | ![]() |
Enter the amount for the one-time garnishment | Space: object requires documentation | |
286 | ![]() |
No supplemental data is required | ||
287 | ![]() |
It is not allowed to specify a pay schedule | ||
288 | ![]() |
The number of dependants is specified but apparently not needed | Space: object requires documentation | |
289 | ![]() |
Clear selection(s) from field(s) | Space: object requires documentation | |
290 | ![]() |
The garnishment order & starts at & | ||
291 | ![]() |
The garnishment order & ends at & | ||
292 | ![]() |
Create garnishment order & first | Space: object requires documentation | |
293 | ![]() |
Set the status of the order & to "&" | Space: object requires documentation | |
294 | ![]() |
Specify a release date that comes after the receipt date | Space: object requires documentation | |
295 | ![]() |
Enter a correspondence language | Space: object requires documentation | |
296 | ![]() |
Enter the initial balance | Space: object requires documentation | |
297 | ![]() |
The garnishment order is not released. Delete the release date | Space: object requires documentation | |
298 | ![]() |
Specify a receipt date no later than the current date | Space: object requires documentation | |
299 | ![]() |
Select the single cheque indicator if cheque is payable to plaintiff | Space: object requires documentation | |
300 | ![]() |
Enter a vendor | Space: object requires documentation | |
301 | ![]() |
Delete the initial balance, input is prohibited | Space: object requires documentation | |
302 | ![]() |
Enter the ongoing payment or pay schedule | Space: object requires documentation | |
303 | ![]() |
Delete the ongoing payment or pay schedule, input is prohibited | Space: object requires documentation | |
304 | ![]() |
Report for country grouping & not yet released | ||
305 | ![]() |
Enter an amount | Space: object requires documentation | |
306 | ![]() |
Enter the treatment | Space: object requires documentation | |
307 | ![]() |
The date of relevance should not be larger than the adjustment date | Space: object requires documentation | |
308 | ![]() |
This value is not allowed in the case of a stopped payment | Space: object requires documentation | |
309 | ![]() |
Enter either ongoing payment or pay schedule, but not both | Space: object requires documentation | |
310 | ![]() |
The payroll time unit has changed. Adjust the pay schedule accordingly | Space: object requires documentation | |
311 | ![]() |
Delete entries from the supplement screen | Space: object requires documentation | |
312 | ![]() |
Changes concerning the pay schedule. Unused entries will be deleted | Space: object requires documentation | |
313 | ![]() |
Delete adjustments before you delete the debt | Space: object requires documentation | |
314 | ![]() |
Delete debts and adjustments before you delete the order | Space: object requires documentation | |
315 | ![]() |
No evaluation run found for & | Space: object requires documentation | |
316 | ![]() |
Specify a value less than 100 in the Ongoing Payment field | The short text describes the object sufficiently | |
317 | ![]() |
Labour-spon.fund entered is valid only for first 60 days of & | Space: object requires documentation | |
318 | ![]() |
Space: object requires documentation | ||
319 | ![]() |
Prov. of health tax can only be ON, MB, NF, QC or Prov. of Employment | The short text describes the object sufficiently | |
320 | ![]() |
************* 600 - 899 Reserved area for South Africa ***************** | ||
321 | ![]() |
ID number is missing | ||
322 | ![]() |
ID-number does not match RSA rules | ||
323 | ![]() |
ID-number and birth-date do not correspond | ||
324 | ![]() |
Total contribution amount and percentage may not both be entered | ||
325 | ![]() |
Ethnic origin invalid | ||
326 | ![]() |
Military status invalid | ||
327 | ![]() |
SI-type not valid - check possible entries | ||
328 | ![]() |
Medical Aid not valid - check possible entries | ||
329 | ![]() |
Exemption reason may only be specified if there is no contribution | ||
330 | ![]() |
Exemption reason not valid - check possible entries | ||
331 | ![]() |
For no contribution only exemption reason may be specified | ||
332 | ![]() |
See table T5W1K for valid data (possible entries) | ||
333 | ![]() |
No reference number has been specified | ||
334 | ![]() |
See table T5W1O for valid data (possible entries) | ||
335 | ![]() |
End date may not be less than begin date | ||
336 | ![]() |
Max earnings may not be less than min earnings | ||
337 | ![]() |
Total contribution and employee percentage must both be entered | ||
338 | ![]() |
Tax office invalid - check possible entries | ||
339 | ![]() |
Tax status invalid - check possible entries | ||
340 | ![]() |
Invalid tax status for males | ||
341 | ![]() |
Female as sole breadwinner - no directive received | ||
342 | ![]() |
Number of children may only be entered if tax status is "M" | Space: object requires documentation | |
343 | ![]() |
Employment indicator invalid - check possible entries | ||
344 | ![]() |
Directive percentage entered - no directive received | ||
345 | ![]() |
Directive received - percentage must be entered | ||
346 | ![]() |
No of children entered does not correspond to personal data | ||
347 | ![]() |
No tax reference number has been entered | ||
348 | ![]() |
'To Age' may not be less than 'From Age' | ||
349 | ![]() |
Unable to evaluate age group - no valid entry in T5W2C | ||
350 | ![]() |
Tax procedure invalid - check possible entries | ||
351 | ![]() |
Tax region invalid - check possible entries | ||
352 | ![]() |
Age group indicator invalid - check possible entries | ||
353 | ![]() |
No Subgroup selected | Space: object requires documentation | |
354 | ![]() |
Tax year not valid | ||
355 | ![]() |
Taxable earning max may not be less than min value | ||
356 | ![]() |
Do you really want to close that tax year? | ||
357 | ![]() |
The current date is less than the end date of that tax year | ||
358 | ![]() |
It is not advised to do that | ||
359 | ![]() |
The tax reference number should be numerical | ||
360 | ![]() |
Minority Type will be set to "Others" as its status is 'YES' | Space: object requires documentation | |
361 | ![]() |
Additional Personal data exists even if Participation in survey is 'No' | Space: object requires documentation | |
362 | ![]() |
Additional Personal data exists even if Release of data is 'No'. | Space: object requires documentation | |
363 | ![]() |
No policy/membership number specified | ||
364 | ![]() |
Caution: duplicate policy number - to be ignored when delimiting records | ||
365 | ![]() |
Both Directive percentage and amount may not be set | ||
366 | ![]() |
Directive received was set automatically | ||
367 | ![]() |
Directive percentage or amount must be specified | ||
368 | ![]() |
No entry found in T549A for payroll subunit & | ||
369 | ![]() |
Tax year invalid | ||
370 | ![]() |
Invalid constant from & for & | ||
371 | ![]() |
Form type requested not available | Space: object requires documentation | |
372 | ![]() |
Visible Minorities will be deselected as Visible Minority is set to 'No'. | Space: object requires documentation | |
373 | ![]() |
Wage type description not in T512T | ||
374 | ![]() |
No infotype & record exists on & | ||
375 | ![]() |
Persons with Disabilities will be deselected as Disability is 'No'. | Space: object requires documentation | |
376 | ![]() |
Release of data not possible as Survey Participation flag is 'No'. | Space: object requires documentation | |
377 | ![]() |
Aboriginal Peoples Group will be deselected as Aboriginal is set to 'No'. | Space: object requires documentation | |
378 | ![]() |
Choose 'A' for English or 'F' for French | Space: object requires documentation | |
379 | ![]() |
Enter a Québec enterprise number | Space: object requires documentation | |
380 | ![]() |
Error reading Infotype 0224. Conversion not possible | Space: object requires documentation | |
381 | ![]() |
&4 - Business Logic error during data conversion | Space: object requires documentation | |
382 | ![]() |
General error during data conversion | Space: object requires documentation | |
383 | ![]() |
This employee had errors. Infotype record(s) not converted | Space: object requires documentation | |
384 | ![]() |
No conversion errors found | Space: object requires documentation | |
385 | ![]() |
&4 - Previously existing infotype records deleted | Space: object requires documentation | |
386 | ![]() |
Test mode. Records not committed to database | Space: object requires documentation | |
387 | ![]() |
&4 - Record(s) committed to database | Space: object requires documentation | |
388 | ![]() |
&4 - End date extended to high date | Space: object requires documentation | |
389 | ![]() |
Retroactive accounting has not been deactivated | Space: object requires documentation | |
390 | ![]() |
&4 - Error during User Exit conversion | Space: object requires documentation | |
391 | ![]() |
All existing tax infotypes will be deleted for selected employees | Space: object requires documentation | |
392 | ![]() |
Employee checked - status OK | Space: object requires documentation | |
393 | ![]() |
All selected employees checked - status OK | Space: object requires documentation | |
394 | ![]() |
&4 - Existing infotype record(s) detected | Space: object requires documentation | |
395 | ![]() |
&4 - Cannot delete existing infotype records. Manual deletion required | Space: object requires documentation | |
396 | ![]() |
&4 - Province of Employment "ZZ" cannot be converted | Space: object requires documentation | |
397 | ![]() |
&4 - Employee requires additional &1 &4 record to be created | Space: object requires documentation | |
398 | ![]() |
Choice only available for lines with garnishments | Space: object requires documentation | |
399 | ![]() |
Gender and form of address (Mr./Ms.) are inconsistent | Space: object requires documentation | |
400 | ![]() |
Social Insurance Number must consist of nine digits | Space: object requires documentation | |
401 | ![]() |
Valid transmitter numbers for RL1 and RL2 must begin with "NP" | Space: object requires documentation | |
402 | ![]() |
Error finding Main Assignment. | The short text describes the object sufficiently | |
403 | ![]() |
&1 : &2 &3 &4 | The short text describes the object sufficiently | |
404 | ![]() |
&1 : Error retrieving employee ROE data from PCL4 | The short text describes the object sufficiently | |
405 | ![]() |
Assignment has been rejected. Refer to the error log. | The short text describes the object sufficiently | |
406 | ![]() |
&1 : Reporting period from &2 to &3 is invalid | The short text describes the object sufficiently | |
407 | ![]() |
&1 : Overlapping ROEs detected period &2 to &3. Pernr rejected | The short text describes the object sufficiently | |
408 | ![]() |
&1 : No earnings on Run date/As-of-date. | The short text describes the object sufficiently | |
409 | ![]() |
The Runid is not an Amendment run. | The short text describes the object sufficiently | |
410 | ![]() |
The Run does not contain any forms. | The short text describes the object sufficiently | |
411 | ![]() |
The Runid does not exist. | The short text describes the object sufficiently | |
412 | ![]() |
Pernr has no Tax forms in any of the Runs entered. | The short text describes the object sufficiently | |
413 | ![]() |
The Runid has been voided. | The short text describes the object sufficiently |
History
Last changed on/by | ![]() |
20130531 | SAP |
SAP Release Created in |