Data Element list used by SAP ABAP Table QMIPS_INSP_CHA (Inspection Characteristic with Additional Information)
SAP ABAP Table QMIPS_INSP_CHA (Inspection Characteristic with Additional Information) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
1 | Data Element | AENNR | Change Number | |
2 | Data Element | CP_TASK_LIST_MAINT_MODE | Maint. Task List: Mode | |
3 | Data Element | CP_TASK_LIST_MAINT_POINTER | Maint. Task List: Pointer of Checkbox Structure | |
4 | Data Element | DATUV | Valid-From Date | |
5 | Data Element | ISOCD_UNIT | ISO code for unit of measurement | |
6 | Data Element | ISOCD_UNIT | ISO code for unit of measurement | |
7 | Data Element | NUMC4 | Count parameters | |
8 | Data Element | OPRID | Operation ID | |
9 | Data Element | PLNFOLGE | Sequence | |
10 | Data Element | PSNFH | Item Number for Production Resource/Tool | |
11 | Data Element | QADDPRO | Sample Quantity Is Added | |
12 | Data Element | QAUSSLOS | Characteristic Relevant for Qual. Score and Scrap Share | |
13 | Data Element | QBFHLZHL | Recording the Number of Defects | |
14 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
15 | Data Element | QCHARACT_ID1 | Characteristic Description for Quality Data Exchange | |
16 | Data Element | QCODEGR | Assigned Code Group | |
17 | Data Element | QCODEGR | Assigned Code Group | |
18 | Data Element | QCODEGR | Assigned Code Group | |
19 | Data Element | QCODEGR | Assigned Code Group | |
20 | Data Element | QCODEGRPO | Defect Code Group for Rejection at Upper Tolerance | |
21 | Data Element | QCODEGRPQL | Defect Code Group for General Rejection | |
22 | Data Element | QCODEGRPU | Defect Code Group for Rejection at Lower Tolerance | |
23 | Data Element | QCODEO | Defect Code for Rejection at Upper Specification Limit | |
24 | Data Element | QCODEQL | Defect Code for Rejection: General | |
25 | Data Element | QCODEU | Defect Code for Rejection at Lower Specification Limit | |
26 | Data Element | QDOKUKZ | Documentation Required for Inspection Results | |
27 | Data Element | QDRUCK1 | ||
28 | Data Element | QDYNREGEL | Dynamic Modification Rule | |
29 | Data Element | QEANTVERF | Fraction Calculation | |
30 | Data Element | QERGDATHPL | Planned Results Data Origin | |
31 | Data Element | QESTUKZ | Recording Type | |
32 | Data Element | QFEHLREC | Defects Recording Automatically Called Up | |
33 | Data Element | QFORMEL | Formula Field | |
34 | Data Element | QFORMEL | Formula Field | |
35 | Data Element | QFORMELSL | Check and Calculate Formula in QM | |
36 | Data Element | QGRENZO1C | First Upper Specification Limit | |
37 | Data Element | QGRENZO2C | Second Upper Specification Limit | |
38 | Data Element | QGRENZU1C | First Lower Specification Limit | |
39 | Data Element | QGRENZU2C | Second Lower Specification Limit | |
40 | Data Element | QHERSTKZ | Manufacturer Considered for Dynamic Modification | |
41 | Data Element | QINPPROC | Parameters for Input Processing in QM Results Recording | |
42 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
43 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
44 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
45 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
46 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
47 | Data Element | QKLASMITC | Class Midpoint | |
48 | Data Element | QKLASSBRC | Class Width | |
49 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
50 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
51 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
52 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
53 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
54 | Data Element | QKUNDKZ | Customer Considered for Dynamic Modification | |
55 | Data Element | QKZAENBEL | Create Change Documents During Results Recording | |
56 | Data Element | QKZDESTROY | Destructive Inspection | |
57 | Data Element | QKZFORMEL | Calculated Characteristic | |
58 | Data Element | QKZPKAT | Reference to Characteristic Attribute Required | |
59 | Data Element | QKZQUMK | Measured Values Must Be Recorded | |
60 | Data Element | QKZQUNMK | Quantitative Characteristic | |
61 | Data Element | QKZSOLLPR | Check Target Value | |
62 | Data Element | QKZTOLOB | Upper Specification Limit | |
63 | Data Element | QKZTOLUN | Lower Specification Limit | |
64 | Data Element | QLIFKZ | Vendor Considered for Dynamic Modification | |
65 | Data Element | QLZEITKZ | Long-Term Inspection | |
66 | Data Element | QMASCHKZ | Machine Considered for Dynamic Modification | |
67 | Data Element | QMATKZ | Material Considered for Dynamic Modification | |
68 | Data Element | QMERKDYN | Characteristic (in Plan) whose Q-Level Will Be Copied | |
69 | Data Element | QMERKGEW | Weighting of the Characteristic | |
70 | Data Element | QMERKNR | Master Inspection Characteristics | |
71 | Data Element | QMERKNRP | Inspection Characteristic Number | |
72 | Data Element | QMGEH6 | Measurement Unit in Which Quantitative Data Is Maintained | |
73 | Data Element | QMIP_CHAORIG_ID | Original Identification for Characteristic | |
74 | Data Element | QNINITIAL | Value Not Initial if Set | |
75 | Data Element | QNINITIAL | Value Not Initial if Set | |
76 | Data Element | QNINITIAL | Value Not Initial if Set | |
77 | Data Element | QNINITIAL | Value Not Initial if Set | |
78 | Data Element | QNINITIAL | Value Not Initial if Set | |
79 | Data Element | QNINITIAL | Value Not Initial if Set | |
80 | Data Element | QNINITIAL | Value Not Initial if Set | |
81 | Data Element | QNINITIAL | Value Not Initial if Set | |
82 | Data Element | QNINITIAL | Value Not Initial if Set | |
83 | Data Element | QNINITIAL | Value Not Initial if Set | |
84 | Data Element | QNINITIAL | Value Not Initial if Set | |
85 | Data Element | QNINITIAL | Value Not Initial if Set | |
86 | Data Element | QNINITIAL | Value Not Initial if Set | |
87 | Data Element | QPLAUSIOBC | Upper Plausibility Limit | |
88 | Data Element | QPLAUSIUNC | Lower Plausibility Limit | |
89 | Data Element | QPMETHODE | Inspection Method | |
90 | Data Element | QPMZWANG | Assignment of Test Equipment Required | |
91 | Data Element | QPROBEFAK | Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.) | |
92 | Data Element | QPROBEPL | Partial Sample No. for Inspection Charac. in Task List | |
93 | Data Element | QPROBME | Sample Unit of Measure | |
94 | Data Element | QPRQUALIF | Inspector Qualification | |
95 | Data Element | QPUMFKZ | Inspection Scope | |
96 | Data Element | QP_CHAORIG | Inspection Characteristic Origin | |
97 | Data Element | QP_CHAORIG_GUID | Reference to Characteristic That Was Adopted | |
98 | Data Element | QP_CTRMETH | Control Method | |
99 | Data Element | QP_NO_INSPECTION | Do Not Copy Inspection Characteristic to Inspection Lot | |
100 | Data Element | QP_RESPLAN | Response Plan | |
101 | Data Element | QRZWANG | Characteristic Category | |
102 | Data Element | QSOLLWERTC | Target Value for a Quantitative Characteristic | |
103 | Data Element | QSPCKRIT | SPC Criterion | |
104 | Data Element | QSPCMK | SPC Characteristic | |
105 | Data Element | QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
106 | Data Element | QSTEUERKZ | Key Containing Preset Characteristic Control Indicators | |
107 | Data Element | QSTICHPR | Sampling Procedure is Required | |
108 | Data Element | QSTICHVERF | Sampling Procedure in Inspection Characteristic | |
109 | Data Element | QTOLERANZ | Tolerance Key | |
110 | Data Element | QTOLOBC | Upper Specification Limit | |
111 | Data Element | QTOLUNC | Lower Specification Limit | |
112 | Data Element | QTOLWAB_C | Date, from Which the Tolerance Change Is Valid (Batch Input) | |
113 | Data Element | QTOLWBIS_C | Date, to Which the Tolerance Change Is Valid (Batch Input) | |
114 | Data Element | QTOLWOBC | Change to Upper Specification Limit | |
115 | Data Element | QTOLWUNC | Change to Lower Specification Limit | |
116 | Data Element | QTXT10 | Text Line for Additional Information | |
117 | Data Element | QTXT20 | Text Line for Additional Information | |
118 | Data Element | QTXT40 | Text Line for Additional Information | |
119 | Data Element | QTXT_CHA | Short Text for Inspection Characteristic | |
120 | Data Element | QVERSNRMK | Version Number of the Master Inspection Characteristic | |
121 | Data Element | QVERSNRPM | Version Number of the Inspection Method | |
122 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
123 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
124 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
125 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
126 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
127 | Data Element | Q_METH_PLANT | Plant for Inspection Method | |
128 | Data Element | VORNR | Operation/Activity Number | |
129 | Data Element | WERKS_D | Plant |