SAP ABAP Table QMIPS_INSP_CHA (Inspection Characteristic with Additional Information)

Hierarchy

☛

EA-APPL (Software Component) SAP Enterprise Extension PLM, SCM, Financials
⤷

QM-PT-IP (Application Component) Inspection Planning
⤷

QMIP_EA (Package) QM: Inspection Plans and Characteristics

Basic Data

Table Category	INTTAB	Structure
Structure	QMIPS_INSP_CHA	Table Relationship Diagram
Short Description	Inspection Characteristic with Additional Information

Delivery and Maintenance

Pool/cluster
Delivery Class
Data Browser/Table View Maintenance		Display/Maintenance Allowed with Restrictions

Components


	Field	Data Element	Domain	Data Type	Length	Decimal Places	Short Description	Check table
1	.INCLUDE				0	0	Maint. Task List: Inspection Characteristics
2	MAINTAIN_MODE	CP_TASK_LIST_MAINT_MODE	CP_TASK_LIST_MAINT_MODE	CHAR	1	0	Maint. Task List: Mode
3	FLAG_BAR_POINTER	CP_TASK_LIST_MAINT_POINTER		NUMC	10	0	Maint. Task List: Pointer of Checkbox Structure
4	SEQUENCE_NO	PLNFOLGE	PLNFOLGE	CHAR	6	0	Sequence
5	ACTIVITY	VORNR	VORNR	CHAR	4	0	Operation/Activity Number
6	OPERATION_ID	OPRID	CHAR8	CHAR	8	0	Operation ID
7	INSPCHAR	QMERKNRP	QMERKNRP	NUMC	4	0	Inspection Characteristic Number
8	QUANTITATIVE_IND	QKZQUNMK	QKZ	CHAR	1	0	Quantitative Characteristic
9	PRESET_CTRL_INDS_KEY	QSTEUERKZ	QSTEUKEY	CHAR	4	0	Key Containing Preset Characteristic Control Indicators	*
10	MSTR_CHAR	QMERKNR	QMERKNR	CHAR	8	0	Master Inspection Characteristics	*
11	PMSTR_CHAR	WERKS_D	WERKS	CHAR	4	0	Plant	*
12	VMSTR_CHAR	QVERSNRMK	QVERSNR	CHAR	6	0	Version Number of the Master Inspection Characteristic
13	CHAR_DESCR	QTXT_CHA	QKURZTEXT	CHAR	40	0	Short Text for Inspection Characteristic
14	METHOD	QPMETHODE	QPMETHODE	CHAR	8	0	Inspection Method	*
15	PMETHOD	Q_METH_PLANT	WERKS	CHAR	4	0	Plant for Inspection Method	*
16	VMETHOD	QVERSNRPM	QVERSNR	CHAR	6	0	Version Number of the Inspection Method
17	TOLERANCE_KEY	QTOLERANZ	QTOLERANZ	CHAR	4	0	Tolerance Key	*
18	MEAS_VALUE_CONFIRM_IND	QKZQUMK	QKZ	CHAR	1	0	Measured Values Must Be Recorded
19	ATTRIBUTE_REQUIRED_IND	QKZPKAT	QKZ	CHAR	1	0	Reference to Characteristic Attribute Required
20	UP_TOL_LMT_IND	QKZTOLOB	QKZ	CHAR	1	0	Upper Specification Limit
21	LW_TOL_LMT_IND	QKZTOLUN	QKZ	CHAR	1	0	Lower Specification Limit
22	TARGET_VAL_CHECK_IND	QKZSOLLPR	QKZ	CHAR	1	0	Check Target Value
23	SCOPE_IND	QPUMFKZ	QPUMFKZ	CHAR	1	0	Inspection Scope
24	LONG_TERM_INSP_IND	QLZEITKZ	QKZ	CHAR	1	0	Long-Term Inspection
25	RESULT_RECORDING_TYPE	QESTUKZ	QESTUKZ	CHAR	1	0	Recording Type
26	DOCU_REQU	QDOKUKZ	QDOKUKZ	CHAR	1	0	Documentation Required for Inspection Results
27	CONFIRMATION_CATEGORY	QRZWANG	QRZWANG	CHAR	1	0	Characteristic Category
28	ADD_SAMPLE_QUANTITY	QADDPRO	QKZ	CHAR	1	0	Sample Quantity Is Added
29	DESTRUCTIVE_INSP_IND	QKZDESTROY	QKZ	CHAR	1	0	Destructive Inspection
30	FORMULA_IND	QKZFORMEL	QKZFORMEL	CHAR	1	0	Calculated Characteristic
31	SAMPLING_PROCEDURE_IND	QSTICHPR	QKZ	CHAR	1	0	Sampling Procedure is Required
32	QSCORE_AND_SHARE_RELEVANT	QAUSSLOS	QKZ	CHAR	1	0	Characteristic Relevant for Qual. Score and Scrap Share
33	DEFECT_NO_CONFIRMATION	QBFHLZHL	QKZ	CHAR	1	0	Recording the Number of Defects
34	INSP_TOOL_IND	QPMZWANG	QKZ	CHAR	1	0	Assignment of Test Equipment Required
35	AUTO_DEFCT_RECORDING	QFEHLREC	QKZ	CHAR	1	0	Defects Recording Automatically Called Up
36	CHANGE_DOCUMENTS_REQ	QKZAENBEL	QKZ	CHAR	1	0	Create Change Documents During Results Recording
37	SPC_IND	QSPCMK	QKZ	CHAR	1	0	SPC Characteristic
38	PRINT_IND	QDRUCK1	QDRUCK1	CHAR	1	0	Print
39	CH_WGT_COD	QMERKGEW	QMERKKLAS	CHAR	2	0	Weighting of the Characteristic	*
40	PHYS_SMPL	QPROBEPL	QPROBEPL	NUMC	3	0	Partial Sample No. for Inspection Charac. in Task List
41	INSPECTOR_QUALIF	QPRQUALIF	QPRQUALIF	CHAR	5	0	Inspector Qualification	*
42	INFOFIELD1	QTXT10	QTXT10	CHAR	10	0	Text Line for Additional Information
43	INFOFIELD2	QTXT20	QTXT20	CHAR	20	0	Text Line for Additional Information
44	INFOFIELD3	QTXT40	QTXT40	CHAR	40	0	Text Line for Additional Information
45	CHARACTERISTIC_NAME	QCHARACT_ID1	QCHARACT_ID	CHAR	40	0	Characteristic Description for Quality Data Exchange
46	RES_ORG	QERGDATHPL	QERGDATH	CHAR	2	0	Planned Results Data Origin	*
47	SHARE_CALC	QEANTVERF	QEANTVERF	CHAR	2	0	Fraction Calculation	*
48	ITEM_NO_OF_PRODUCTION_RESOURCE	PSNFH	PSNFH	NUMC	4	0	Item Number for Production Resource/Tool
49	DEC_PLACES	QSTELLEN	QSTELLEN	INT1	3	0	Number of Places to the Right of a Decimal Point (Accuracy)
50	MEAS_UNIT	QMGEH6	MSEC6	CHAR	6	0	Measurement Unit in Which Quantitative Data Is Maintained	*
51	MEAS_UNIT_ISO	ISOCD_UNIT	ISOCD_UNIT	CHAR	3	0	ISO code for unit of measurement	*
52	TARGET_VAL	QSOLLWERTC	QSOLLWERTC	CHAR	16	0	Target Value for a Quantitative Characteristic
53	TARGET_VAL_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
54	LW_TOL_LMT	QTOLUNC	QSOLLWERTC	CHAR	16	0	Lower Specification Limit
55	LW_TOL_LMT_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
56	UP_TOL_LMT	QTOLOBC	QSOLLWERTC	CHAR	16	0	Upper Specification Limit
57	UP_TOL_LMT_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
58	CLASS_WIDTH	QKLASSBRC	QSOLLWERTC	CHAR	16	0	Class Width
59	CLASS_WIDTH_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
60	CLASS_MIDPOINT	QKLASMITC	QSOLLWERTC	CHAR	16	0	Class Midpoint
61	CLASS_MIDPOINT_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
62	UP_LMT_1	QGRENZO1C	QSOLLWERTC	CHAR	16	0	First Upper Specification Limit
63	UP_LMT_1_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
64	LW_LMT_1	QGRENZU1C	QSOLLWERTC	CHAR	16	0	First Lower Specification Limit
65	LW_LMT_1_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
66	UP_LMT_2	QGRENZO2C	QSOLLWERTC	CHAR	16	0	Second Upper Specification Limit
67	UP_LMT_2_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
68	LW_LMT_2	QGRENZU2C	QSOLLWERTC	CHAR	16	0	Second Lower Specification Limit
69	LW_LMT_2_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
70	UP_PLS_LMT	QPLAUSIOBC	QSOLLWERTC	CHAR	16	0	Upper Plausibility Limit
71	UP_PLS_LMT_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
72	LW_PLS_LMT	QPLAUSIUNC	QSOLLWERTC	CHAR	16	0	Lower Plausibility Limit
73	LW_PLS_LMT_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
74	UP_NEW_LMT	QTOLWOBC	QSOLLWERTC	CHAR	16	0	Change to Upper Specification Limit
75	UP_NEW_LMT_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
76	LW_NEW_LMT	QTOLWUNC	QSOLLWERTC	CHAR	16	0	Change to Lower Specification Limit
77	LW_NEW_LMT_NI	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
78	DAT_UP_NEW_LMT	QTOLWAB_C	CHAR10	CHAR	10	0	Date, from Which the Tolerance Change Is Valid (Batch Input)
79	DAT_LW_NEW_LMT	QTOLWBIS_C	CHAR10	CHAR	10	0	Date, to Which the Tolerance Change Is Valid (Batch Input)
80	FORMULA_CHECK_BY_SAP	QFORMELSL	QFORMELSL	CHAR	1	0	Check and Calculate Formula in QM
81	FORMULA_FIELD_1	QFORMEL	QFORMEL	CHAR	60	0	Formula Field
82	FORMULA_FIELD_2	QFORMEL	QFORMEL	CHAR	60	0	Formula Field
83	IND_SELSET_OR_CODEGRP1	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
84	CAT_TYPE1	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
85	SEL_SET1	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
86	PSEL_SET1	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
87	IND_SELSET_OR_CODEGRP2	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
88	CAT_TYPE2	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
89	CODE_GROUP2	QCODEGR	QCGRAUSW	CHAR	8	0	Assigned Code Group
90	PSEL_SET2	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
91	IND_SELSET_OR_CODEGRP3	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
92	CAT_TYPE3	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
93	CODE_GROUP3	QCODEGR	QCGRAUSW	CHAR	8	0	Assigned Code Group
94	PSEL_SET3	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
95	IND_SELSET_OR_CODEGRP4	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
96	CAT_TYPE4	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
97	CODE_GROUP4	QCODEGR	QCGRAUSW	CHAR	8	0	Assigned Code Group
98	PSEL_SET4	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
99	IND_SELSET_OR_CODEGRP5	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
100	CAT_TYPE5	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
101	CODE_GROUP5	QCODEGR	QCGRAUSW	CHAR	8	0	Assigned Code Group
102	PSEL_SET5	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
103	DEF_CODE_GRP_GENERAL	QCODEGRPQL	QCODEGRP	CHAR	8	0	Defect Code Group for General Rejection	*
104	DEF_CODE_GENERAL	QCODEQL	QCODE	CHAR	4	0	Defect Code for Rejection: General	*
105	LW_DEF_CODE_GRP	QCODEGRPU	QCODEGRP	CHAR	8	0	Defect Code Group for Rejection at Lower Tolerance	*
106	LW_DEF_CODE	QCODEU	QCODE	CHAR	4	0	Defect Code for Rejection at Lower Specification Limit	*
107	UP_DEF_CODE_GRP	QCODEGRPO	QCODEGRP	CHAR	8	0	Defect Code Group for Rejection at Upper Tolerance	*
108	UP_DEF_CODE	QCODEO	QCODE	CHAR	4	0	Defect Code for Rejection at Upper Specification Limit	*
109	SMPL_PROCEDURE	QSTICHVERF	QSTPRVER	CHAR	8	0	Sampling Procedure in Inspection Characteristic	*
110	SMPL_UNIT	QPROBME	MEINS	UNIT	3	0	Sample Unit of Measure	*
111	SMPL_UNIT_ISO	ISOCD_UNIT	ISOCD_UNIT	CHAR	3	0	ISO code for unit of measurement	*
112	SMPL_QUANT	QPROBEFAK	QPROBEFAK	DEC	5	2	Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.)
113	SPC_CRITERION_KEY	QSPCKRIT	QSPCKRIT	CHAR	3	0	SPC Criterion	QPSP
114	INPPROC	QINPPROC	CHAR3	CHAR	3	0	Parameters for Input Processing in QM Results Recording
115	DYN_MODIF_RULE	QDYNREGEL	QDYNREGEL	CHAR	3	0	Dynamic Modification Rule	*
116	DYN_MODIF_REF_CHA	QMERKDYN	QMERKNRP	NUMC	4	0	Characteristic (in Plan) whose Q-Level Will Be Copied
117	DYN_MODIF_BY_MATERIAL	QMATKZ	QKZ	CHAR	1	0	Material Considered for Dynamic Modification
118	DYN_MODIF_BY_VENDOR	QLIFKZ	QKZ	CHAR	1	0	Vendor Considered for Dynamic Modification
119	DYN_MODIF_BY_MANUFAC	QHERSTKZ	QKZ	CHAR	1	0	Manufacturer Considered for Dynamic Modification
120	DYN_MODIF_BY_CUSTOMR	QKUNDKZ	QKZ	CHAR	1	0	Customer Considered for Dynamic Modification
121	DYN_MODIF_BY_MACHINE	QMASCHKZ	QKZ	CHAR	1	0	Machine Considered for Dynamic Modification
122	CHA_ORIGIN_TYPE	QP_CHAORIG	QP_CHAORIG	CHAR	3	0	Inspection Characteristic Origin	*
123	CHA_ORIGIN_ID	QMIP_CHAORIG_ID	QMIP_CHAORIG_ID	CHAR	40	0	Original Identification for Characteristic
124	CHA_ORIGIN_GUID	QP_CHAORIG_GUID	PLM_AUDIT_GUID_AUD	RAW	16	0	Reference to Characteristic That Was Adopted
125	NO_COPY_CHAR_TO_LOT	QP_NO_INSPECTION	QKZ	CHAR	1	0	Do Not Copy Inspection Characteristic to Inspection Lot
126	CONTROL_METHOD	QP_CTRMETH	QP_CTRMETH	CHAR	3	0	Control Method	*
127	RESPONSE_PLAN	QP_RESPLAN	QP_RESPLAN	CHAR	3	0	Response Plan	*
128	AENDERGNR	AENNR	AENNR	CHAR	12	0	Change Number	AENR
129	GUELTIGAB	DATUV	DATUM	DATS	8	0	Valid-From Date
130	POINTER_CHV	NUMC4	NUMC4	NUMC	4	0	Count parameters