Data Element list used by SAP ABAP Table QGMK (QM: Specifications and results for insp. charac. (GLV))
SAP ABAP Table 
QGMK (QM: Specifications and results for insp. charac. (GLV)) is using
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Data Element |
ATINN | Internal characteristic | |
| 2 | Data Element |
AUFNR | Order Number | |
| 3 | Data Element |
CHARG_D | Batch Number | |
| 4 | Data Element |
CHARG_D | Batch Number | |
| 5 | Data Element |
CIM_COUNT | Internal counter | |
| 6 | Data Element |
EBELN | Purchasing Document Number | |
| 7 | Data Element |
EBELP | Item Number of Purchasing Document | |
| 8 | Data Element |
ELIFN | Vendor's account number | |
| 9 | Data Element |
EMATN | Material number corresponding to manufacturer part number | |
| 10 | Data Element |
EQUNR | Equipment Number | |
| 11 | Data Element |
KZWES | GR blocked stock | |
| 12 | Data Element |
LGORT_D | Storage location | |
| 13 | Data Element |
MANDT | Client | |
| 14 | Data Element |
MATNR | Material Number | |
| 15 | Data Element |
MAT_KDAUF | Sales order number of valuated sales order stock | |
| 16 | Data Element |
MAT_KDPOS | Sales Order Item of Valuated Sales Order Stock | |
| 17 | Data Element |
PLNFOLGE | Sequence | |
| 18 | Data Element |
QADDPRO | Sample Quantity Is Added | |
| 19 | Data Element |
QAENDERER | Name of User who Most Recently Changed the Data Record | |
| 20 | Data Element |
QAENDERER | Name of User who Most Recently Changed the Data Record | |
| 21 | Data Element |
QANNAHMEZ | Acceptance Number | |
| 22 | Data Element |
QANTEIL | Estimated Fraction of Nonconforming Sample Units | |
| 23 | Data Element |
QANTEILC | Estimated Fraction of Nonconforming Units | |
| 24 | Data Element |
QANTEILKZ | Take Share Estimate into Account | |
| 25 | Data Element |
QANTEILO | Estimated Fraction Above the Tolerance Range | |
| 26 | Data Element |
QANTEILOC | Estimated Fraction Above the Tolerance Range | |
| 27 | Data Element |
QANTEILU | Estimated Fraction Below the Tolerance Range | |
| 28 | Data Element |
QANTEILUC | Estimated Fraction Below the Tolerance Range | |
| 29 | Data Element |
QANZFEHEH4 | Number of Nonconforming Sample Units | |
| 30 | Data Element |
QANZFEHL4 | Number of Defects Found | |
| 31 | Data Element |
QANZSTIPRO | Number of Partial Samples for the Characteristic | |
| 32 | Data Element |
QANZWERTG4 | Number of Inspected Sample Units | |
| 33 | Data Element |
QANZWERTO4 | Number of Measured Values Above the Tolerance Range | |
| 34 | Data Element |
QANZWERTU4 | Number of Measured Values Below the Tolerance Range | |
| 35 | Data Element |
QATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
| 36 | Data Element |
QAUSSLOS | Characteristic Relevant for Qual. Score and Scrap Share | |
| 37 | Data Element |
QBEASTATOD | Quality Status of Results Record Before Last Change | |
| 38 | Data Element |
QBEASTATUS | Results Record Status | |
| 39 | Data Element |
QBEWERT | Valuation Rule | |
| 40 | Data Element |
QBEWERT | Valuation Rule | |
| 41 | Data Element |
QBFHLZHL | Recording the Number of Defects | |
| 42 | Data Element |
QCODE | Code | |
| 43 | Data Element |
QCODE | Code | |
| 44 | Data Element |
QCODE | Code | |
| 45 | Data Element |
QCODE | Code | |
| 46 | Data Element |
QCODE | Code | |
| 47 | Data Element |
QCODEGRP | Code Group | |
| 48 | Data Element |
QCODEGRP | Code Group | |
| 49 | Data Element |
QCODEGRP | Code Group | |
| 50 | Data Element |
QCODEGRP | Code Group | |
| 51 | Data Element |
QCODEGRP | Code Group | |
| 52 | Data Element |
QCODEGRPQL | Defect Code Group for General Rejection | |
| 53 | Data Element |
QCODEQL | Defect Code for Rejection: General | |
| 54 | Data Element |
QDATUMAEND | Date on Which Data Record Was Changed | |
| 55 | Data Element |
QDATUMAEND | Date on Which Data Record Was Changed | |
| 56 | Data Element |
QDATUMERST | Date on Which the Data Record Was Created | |
| 57 | Data Element |
QDATUMERST | Date on Which the Data Record Was Created | |
| 58 | Data Element |
QDBEWERTG | Valuation of the Characteristic for Dynamic Modification | |
| 59 | Data Element |
QDIFF_DEC_PLACES | Different Number of Decimal Places | |
| 60 | Data Element |
QDOKUKZ | Documentation Required for Inspection Results | |
| 61 | Data Element |
QDRUCK1 | ||
| 62 | Data Element |
QDYNREGEL | Dynamic Modification Rule | |
| 63 | Data Element |
QDYNSTRING | String for Dynamic Modification Criteria (Database Relevant) | |
| 64 | Data Element |
QEANTVERF | Fraction Calculation | |
| 65 | Data Element |
QENTST | Date of Lot Creation | |
| 66 | Data Element |
QENTSTZEIT | Time of Lot Creation | |
| 67 | Data Element |
QERGDATH | Origin of Results Data | |
| 68 | Data Element |
QERSTELLER | Name of User Who Created the Data Record | |
| 69 | Data Element |
QERSTELLER | Name of User Who Created the Data Record | |
| 70 | Data Element |
QESTUKZ | Recording Type | |
| 71 | Data Element |
QFEHLKLAS | Defect class | |
| 72 | Data Element |
QFEHLREC | Defects Recording Automatically Called Up | |
| 73 | Data Element |
QGEBEH | Lot Container | |
| 74 | Data Element |
QGESUMF | Sample Size that Has to Be Inspected for a Characteristic | |
| 75 | Data Element |
QGRENZO1C | First Upper Specification Limit | |
| 76 | Data Element |
QGRENZO2C | Second Upper Specification Limit | |
| 77 | Data Element |
QGRENZOB1 | First Upper Specification Limit | |
| 78 | Data Element |
QGRENZOB2 | Second Upper Specification Limit | |
| 79 | Data Element |
QGRENZU1C | First Lower Specification Limit | |
| 80 | Data Element |
QGRENZU2C | Second Lower Specification Limit | |
| 81 | Data Element |
QGRENZUN1 | First Lower Specification Limit | |
| 82 | Data Element |
QGRENZUN2 | Second Lower Specification Limit | |
| 83 | Data Element |
QGUELSTPAN | Number of Valid Partial Samples | |
| 84 | Data Element |
QHERK | Inspection Lot Origin | |
| 85 | Data Element |
QHPZ | 100% Inspection | |
| 86 | Data Element |
QISTSTPUMF | Number of Recorded Sample Units | |
| 87 | Data Element |
QIVARIANZ | Internal Dispersion of Valid Measured Values | |
| 88 | Data Element |
QIVARIANZC | Internal Dispersion of Valid Measured Values | |
| 89 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 90 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 91 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 92 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 93 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 94 | Data Element |
QKFAKTOR | K-Factor for a Variable Inspection | |
| 95 | Data Element |
QKFAKTORC | K-Factor for a Variable Inspection | |
| 96 | Data Element |
QKTEXTOBJ | Short Text for Inspection Object | |
| 97 | Data Element |
QKUNWE | Customer (Ship-To Party) | |
| 98 | Data Element |
QKURZTEXT | Short Text | |
| 99 | Data Element |
QKURZTEXT | Short Text | |
| 100 | Data Element |
QKURZTEXT | Short Text | |
| 101 | Data Element |
QKURZTEXT | Short Text | |
| 102 | Data Element |
QKURZTEXT | Short Text | |
| 103 | Data Element |
QKZAENBEL | Create Change Documents During Results Recording | |
| 104 | Data Element |
QKZATTRFE | Attributive Inspection by Nonconforming Units | |
| 105 | Data Element |
QKZATTRFZ | Attributive Inspection by Number of Defects | |
| 106 | Data Element |
QKZBEWERTG | Valuation Copied or Forced | |
| 107 | Data Element |
QKZCOD | Valuation by Code | |
| 108 | Data Element |
QKZDESTROY | Destructive Inspection | |
| 109 | Data Element |
QKZDYNR | Dynamic Modification Rule Available | |
| 110 | Data Element |
QKZEINSTMK | Characteristic Type | |
| 111 | Data Element |
QKZFERTPRF | Inspection with Inspection Points | |
| 112 | Data Element |
QKZFORMEL | Calculated Characteristic | |
| 113 | Data Element |
QKZKNULL | Inspection Against Specification Limits (k = 0) | |
| 114 | Data Element |
QKZMAN | Manual Valuation | |
| 115 | Data Element |
QKZPKAT | Reference to Characteristic Attribute Required | |
| 116 | Data Element |
QKZPROCCHAR | Process Characteristic | |
| 117 | Data Element |
QKZQALT | Partial Lots Exist | |
| 118 | Data Element |
QKZQRK | Acceptance Using Control Chart | |
| 119 | Data Element |
QKZQUMK | Measured Values Must Be Recorded | |
| 120 | Data Element |
QKZQUNMK | Quantitative Characteristic | |
| 121 | Data Element |
QKZRAST | Indicator: Sampling Procedure for Inspection Points | |
| 122 | Data Element |
QKZSKIPLOT | Lot Skipped | |
| 123 | Data Element |
QKZSOLLPR | Check Target Value | |
| 124 | Data Element |
QKZTOLOB | Upper Specification Limit | |
| 125 | Data Element |
QKZTOLUN | Lower Specification Limit | |
| 126 | Data Element |
QKZUMFS | Multiple Samples | |
| 127 | Data Element |
QKZVARS | Variable Inspection by S-Method | |
| 128 | Data Element |
QKZ_REF_EE | Type of Master Insp. Characteristic Ref. Results Recording | |
| 129 | Data Element |
QLEITSTKZ | Control Characteristics Results - QM Subsystem | |
| 130 | Data Element |
QLFNKN | Current Node Number from Order Counter APLZL | |
| 131 | Data Element |
QLFNKN | Current Node Number from Order Counter APLZL | |
| 132 | Data Element |
QLGORTVORG | Storage Location for Inspection Lot Stock | |
| 133 | Data Element |
QLIFNR | Number of Manufacturer | |
| 134 | Data Element |
QLMENGEIST | Actual Lot Quantity | |
| 135 | Data Element |
QLMENGELZ | Sample Quantity for Long-Term Characteristics | |
| 136 | Data Element |
QLMENGEPR | Quantity Actually Inspected | |
| 137 | Data Element |
QLMENGESCH | Defective Quantity in Inspected Quantity | |
| 138 | Data Element |
QLMENGEZER | Quantity Destroyed During Inspection | |
| 139 | Data Element |
QLOSMENGE | Inspection Lot Quantity | |
| 140 | Data Element |
QLOSMENGEH | Base Unit of Measure for The Inspection Lot Quantity | |
| 141 | Data Element |
QLZEITKZ | Long-Term Inspection | |
| 142 | Data Element |
QMASCHINE | General Information | |
| 143 | Data Element |
QMAXWERT | Maximum Value of the Valid Measured Values | |
| 144 | Data Element |
QMAXWERTC | Maximum Value of the Valid Measured Values | |
| 145 | Data Element |
QMBEWERTG | Inspection Result Valuation | |
| 146 | Data Element |
QMERKDYN | Characteristic (in Plan) whose Q-Level Will Be Copied | |
| 147 | Data Element |
QMERKGEW | Weighting of the Characteristic | |
| 148 | Data Element |
QMERKNR | Master Inspection Characteristics | |
| 149 | Data Element |
QMERKNRP | Inspection Characteristic Number | |
| 150 | Data Element |
QMGEH6 | Measurement Unit in Which Quantitative Data Is Maintained | |
| 151 | Data Element |
QMINWERT | Minimum Value of the Valid Measured Values | |
| 152 | Data Element |
QMINWERTC | Minimum Value of the Valid Measured Values | |
| 153 | Data Element |
QMITTELWRT | Arithmetic Mean of Valid Measured Values | |
| 154 | Data Element |
QMITTEWRTC | Arithmetic Mean of Valid Measured Values | |
| 155 | Data Element |
QMKCONTROL | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
| 156 | Data Element |
QMKKURZTXT | Short Text for the Inspection Characteristic | |
| 157 | Data Element |
QMOMENT3 | Third Central Moment of Valid Measured Values | |
| 158 | Data Element |
QMOMENT3C | Third Central Moment of Valid Measured Values | |
| 159 | Data Element |
QMOMENT4 | Fourth Central Moment of Valid Measured Values | |
| 160 | Data Element |
QMOMENT4C | Fourth Central Moment of Valid Measured Values | |
| 161 | Data Element |
QNAENDKZ | Default Control Indicators Cannot Be Changed | |
| 162 | Data Element |
QNIANTEIL | Not Initialized for Fraction | |
| 163 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 164 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 165 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 166 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 167 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 168 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 169 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 170 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 171 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 172 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 173 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 174 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 175 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 176 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 177 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 178 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 179 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 180 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 181 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 182 | Data Element |
QNIPLANMK | Unplanned Characteristic | |
| 183 | Data Element |
QNOINPUT | Results Are Calculated Internally | |
| 184 | Data Element |
QOFFELZMK | Number of Outstanding Long-Term Chars Which Require Conf. | |
| 185 | Data Element |
QOFFENLZMK | Number of Outstanding Short-Term Chars Which Require Conf. | |
| 186 | Data Element |
QORIGINAL_INPUT | Original Value Before Input Processing | |
| 187 | Data Element |
QPARA | Control Indicator "Parameter Characteristic" Set/Not Set | |
| 188 | Data Element |
QPART | Inspection Type | |
| 189 | Data Element |
QPHYSPRNR | Physical Sample Number | |
| 190 | Data Element |
QPHYSPROBE | Number of the Partial Sample | |
| 191 | Data Element |
QPLOS | Inspection Lot Number | |
| 192 | Data Element |
QPMETHODE | Inspection Method | |
| 193 | Data Element |
QPMZWANG | Assignment of Test Equipment Required | |
| 194 | Data Element |
QPROBEFAK | Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.) | |
| 195 | Data Element |
QPROBEMGEH | Base Unit of Measure for the Sample Unit | |
| 196 | Data Element |
QPROBENR | Sample Number | |
| 197 | Data Element |
QPROBME | Sample Unit of Measure | |
| 198 | Data Element |
QPROBNRBIS | Highest Partial Sample No. Valid for Instruction | |
| 199 | Data Element |
QPRPOS | Test Position | |
| 200 | Data Element |
QPRQUALIF | Inspector Qualification | |
| 201 | Data Element |
QPRSCHAERF | Inspection Severity | |
| 202 | Data Element |
QPRSTUFE | Inspection Stage | |
| 203 | Data Element |
QPRUEFDATB | End Date of the Inspection | |
| 204 | Data Element |
QPRUEFDATV | Inspection Start Date | |
| 205 | Data Element |
QPRUEFER | Name of the Inspector | |
| 206 | Data Element |
QPRUEFUMF | Quantity to Be Inspected | |
| 207 | Data Element |
QPRUEFZTB | End Time of the Inspection | |
| 208 | Data Element |
QPRUEFZTV | Starting Time of the Inspection | |
| 209 | Data Element |
QPRZIEHVER | Sample-Drawing Procedure | |
| 210 | Data Element |
QPUMFKZ | Inspection Scope | |
| 211 | Data Element |
QPZLFH | Assigned Test Equipment | |
| 212 | Data Element |
QQRKNR | Control Chart Number | |
| 213 | Data Element |
QRASTER | Inspection Frequency (Only for Inspection with Insp. Points) | |
| 214 | Data Element |
QRES_TEXT | Text for Code | |
| 215 | Data Element |
QRUECKNR | Confirmation Number for Inspection Characteristic | |
| 216 | Data Element |
QRUECKWEZ | Rejection Number | |
| 217 | Data Element |
QRZWANG | Characteristic Category | |
| 218 | Data Element |
QSOLLWERTC | Target Value for a Quantitative Characteristic | |
| 219 | Data Element |
QSOLLWERTE | Target Value for a Quantitative Characteristic | |
| 220 | Data Element |
QSOSTPANZ | Number of Planned Partial Samples | |
| 221 | Data Element |
QSPANNWEI | Range of Valid Measured Values | |
| 222 | Data Element |
QSPANNWEIC | Range of Valid Measured Values | |
| 223 | Data Element |
QSPCMK | SPC Characteristic | |
| 224 | Data Element |
QSTAT34 | Stock Postings Completed | |
| 225 | Data Element |
QSTAT35 | Usage Decision Has Been Made | |
| 226 | Data Element |
QSTATUS | Specification Record Status | |
| 227 | Data Element |
QSTATUS | Specification Record Status | |
| 228 | Data Element |
QSTDAW | Standard Deviation of Valid Measured Values | |
| 229 | Data Element |
QSTDAWC | Standard Deviation of Valid Measured Values | |
| 230 | Data Element |
QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 231 | Data Element |
QSTICHPR | Sampling Procedure is Required | |
| 232 | Data Element |
QSTICHVERF | Sampling Procedure in Inspection Characteristic | |
| 233 | Data Element |
QSTIPROUMF | Sample Size that Must Be Inspected | |
| 234 | Data Element |
QSYNCRO | Synchronization is Active | |
| 235 | Data Element |
QTECH | Following Fields - Technical (Gen. List Viewer) | |
| 236 | Data Element |
QTLOS | Partial lot number | |
| 237 | Data Element |
QTLOS | Partial lot number | |
| 238 | Data Element |
QTOLERWKZ | Tolerance Change Is Active | |
| 239 | Data Element |
QTOLOB | Upper Specification Limit | |
| 240 | Data Element |
QTOLOBC | Upper Specification Limit | |
| 241 | Data Element |
QTOLUN | Lower Tolerance Limit | |
| 242 | Data Element |
QTOLUNC | Lower Specification Limit | |
| 243 | Data Element |
QTSTICHPRO | Partial Samples Possible | |
| 244 | Data Element |
QTXT10 | Text Line for Additional Information | |
| 245 | Data Element |
QTXT20 | Text Line for Additional Information | |
| 246 | Data Element |
QTXT40 | Text Line for Additional Information | |
| 247 | Data Element |
QUMREN | Factor for Converting MatUnitOfMeasure to SampUnitOfMeasure | |
| 248 | Data Element |
QUMRENPME | Factor for Converting SampUnitOfMeasure to MatUnitOfMeasure | |
| 249 | Data Element |
QVARIANZ | Dispersion (Variance) of Valid Measured Values | |
| 250 | Data Element |
QVARIANZC | Dispersion (Variance) of Valid Measured Values | |
| 251 | Data Element |
QVERDICHTG | Reduced No. of Samples for Characteristic Summarization | |
| 252 | Data Element |
QVERSNPRZV | Version No. of the Sample-Drawing Procedure | |
| 253 | Data Element |
QVERSNR | Version Number | |
| 254 | Data Element |
QVERSNR | Version Number | |
| 255 | Data Element |
QVERSNR | Version Number | |
| 256 | Data Element |
QVERSNR | Version Number | |
| 257 | Data Element |
QVERSNR | Version Number | |
| 258 | Data Element |
QVERSNRMK | Version Number of the Master Inspection Characteristic | |
| 259 | Data Element |
QVERSNRPM | Version Number of the Inspection Method | |
| 260 | Data Element |
QVINSMK | Quantity Is or Was in Inspection Stock | |
| 261 | Data Element |
QVORGAEND | Specifications Can Be Changed | |
| 262 | Data Element |
QWERKVORG | Plant Where Stock for Inspection Lot Is Held | |
| 263 | Data Element |
QZAEHLER | Plant for the Master Inspection Characteristic | |
| 264 | Data Element |
QZAEHLERQL | Sequential Counter for Different Quality Levels | |
| 265 | Data Element |
QZAEHLPRZV | Item Number in Sample-Drawing Procedure | |
| 266 | Data Element |
QZEITAEND | Time at which data record was last changed | |
| 267 | Data Element |
QZEITERSTL | Time at which data record was created | |
| 268 | Data Element |
REVLV | Revision level | |
| 269 | Data Element |
SERAIL | Serial Number Profile | |
| 270 | Data Element |
TPLNR | Functional Location | |
| 271 | Data Element |
VAL_TEXT | Short Text for Fixed Values | |
| 272 | Data Element |
VAL_TEXT | Short Text for Fixed Values | |
| 273 | Data Element |
VERID | Production Version | |
| 274 | Data Element |
VORNR | Operation/Activity Number | |
| 275 | Data Element |
WERKS_D | Plant | |
| 276 | Data Element |
WERKS_D | Plant | |
| 277 | Data Element |
XCHPF | Batch management requirement indicator |
