SAP ABAP Table BIPMK (Inspection characteristics for batch input of task lists)

Hierarchy

☛ BBPCRM (Software Component) BBPCRM
   ⤷ CRM (Application Component) Customer Relationship Management
     ⤷ CRM_APPLICATION (Package) All CRM Components Without Special Structure Packages
       ⤷ QP (Package) QM inspection plan characteristics

Basic Data

Table Category	INTTAB	Structure
Structure	BIPMK	Table Relationship Diagram
Short Description	Inspection characteristics for batch input of task lists

Delivery and Maintenance

Pool/cluster
Delivery Class
Data Browser/Table View Maintenance	Display/Maintenance Allowed with Restrictions

Components

	Field	Key	Data Element	Domain	Data Type	Length	Decimal Places	Short Description	Check table
1	RECTY	☐	RECTY	CHAR2	CHAR	2	0	Record type for batch input of task lists
2	PLNTY	☐	PLNTY	PLNTY	CHAR	1	0	Task List Type	*
3	PLNNR	☐	PLNNR	PLNNR	CHAR	8	0	Key for Task List Group
4	PLNAL	☐	PLNAL	ALTNR	CHAR	2	0	Group Counter
5	PLNFL	☐	PLNFOLGE	PLNFOLGE	CHAR	6	0	Sequence
6	VORNR	☐	VORNR	VORNR	CHAR	4	0	Operation/Activity Number
7	MERKNR	☐	QMERKNR_C	CHAR4	CHAR	4	0	Inspection Characteristic Number (Batch Input)
8	KURZTEXT	☐	QKURZTEXT	QKURZTEXT	CHAR	40	0	Short Text
9	TXTSP	☐	SPRAS_BI	CHAR1	CHAR	1	0	Language key (batch input)
10	VSTEUERKZ	☐	QSTEUERKZ	QSTEUKEY	CHAR	4	0	Key Containing Preset Characteristic Control Indicators	*
11	TOLERANZSL	☐	QTOLERANZ	QTOLERANZ	CHAR	4	0	Tolerance Key	*
12	.INCLUDE	☐				0	0	Characteristic control indicators
13	QUANTITAT	☐	QKZQUNMK	QKZ	CHAR	1	0	Quantitative Characteristic
14	MESSWERTE	☐	QKZQUMK	QKZ	CHAR	1	0	Measured Values Must Be Recorded
15	PRUEFKAT	☐	QKZPKAT	QKZ	CHAR	1	0	Reference to Characteristic Attribute Required
16	TOLEROBEN	☐	QKZTOLOB	QKZ	CHAR	1	0	Upper Specification Limit
17	TOLERUNTEN	☐	QKZTOLUN	QKZ	CHAR	1	0	Lower Specification Limit
18	SOLLPRUEF	☐	QKZSOLLPR	QKZ	CHAR	1	0	Check Target Value
19	PUMFKZ	☐	QPUMFKZ	QPUMFKZ	CHAR	1	0	Inspection Scope
20	LZEITKZ	☐	QLZEITKZ	QKZ	CHAR	1	0	Long-Term Inspection
21	ESTUKZ	☐	QESTUKZ	QESTUKZ	CHAR	1	0	Recording Type
22	DOKUKZ	☐	QDOKUKZ	QDOKUKZ	CHAR	1	0	Documentation Required for Inspection Results
23	RZWANG	☐	QRZWANG	QRZWANG	CHAR	1	0	Characteristic Category
24	SYNCRO	☐	QSYNCRO	QKZ	CHAR	1	0	Synchronization is Active
25	ADDPRO	☐	QADDPRO	QKZ	CHAR	1	0	Sample Quantity Is Added
26	ZERSTPRF	☐	QKZDESTROY	QKZ	CHAR	1	0	Destructive Inspection
27	FORMELMK	☐	QKZFORMEL	QKZFORMEL	CHAR	1	0	Calculated Characteristic
28	STICHPR	☐	QSTICHPR	QKZ	CHAR	1	0	Sampling Procedure is Required
29	AUSSLOS	☐	QAUSSLOS	QKZ	CHAR	1	0	Characteristic Relevant for Qual. Score and Scrap Share
30	FIXIERT	☐	QNAENDKZ	QKZ	CHAR	1	0	Default Control Indicators Cannot Be Changed
31	BEWFHLZHL	☐	QBFHLZHL	QKZ	CHAR	1	0	Recording the Number of Defects
32	LSTKZ	☐	QLEITSTKZ	QKZ	CHAR	1	0	Control Characteristics Results - QM Subsystem
33	VORGAEND	☐	QVORGAEND	QKZ	CHAR	1	0	Specifications Can Be Changed
34	PMMZWANG	☐	QPMZWANG	QKZ	CHAR	1	0	Assignment of Test Equipment Required
35	FEHLREC	☐	QFEHLREC	QKZ	CHAR	1	0	Defects Recording Automatically Called Up
36	AENDBELEG	☐	QKZAENBEL	QKZ	CHAR	1	0	Create Change Documents During Results Recording
37	QSPCMK	☐	QSPCMK	QKZ	CHAR	1	0	SPC Characteristic
38	KEINDRUCK	☐	QDRUCK1	QDRUCK1	CHAR	1	0	Print
39	PARA	☐	QPARA	QKZ	CHAR	1	0	Control Indicator "Parameter Characteristic" Set/Not Set
40	PROCESSMK	☐	QKZPROCCHAR	QKZ	CHAR	1	0	Process Characteristic
41	VERWMERKM	☐	QMERKNR	QMERKNR	CHAR	8	0	Master Inspection Characteristics	*
42	QPMK_REF	☐	QKZ_REF	QKZ	CHAR	1	0	Reference to Master Insp. Characteristic in Task List
43	QPMK_ZAEHL	☐	QZAEHLER	QZAEHLER	CHAR	4	0	Plant for the Master Inspection Characteristic
44	MKVERSION	☐	QVERSNRMK	QVERSNR	CHAR	6	0	Version Number of the Master Inspection Characteristic
45	PMETHODE	☐	QPMETHODE	QPMETHODE	CHAR	8	0	Inspection Method	*
46	QMTB_WERKS	☐	WERKS_D	WERKS	CHAR	4	0	Plant	*
47	PMTVERSION	☐	QVERSNRPM	QVERSNR	CHAR	6	0	Version Number of the Inspection Method
48	PROBENR	☐	QPROBEPL_C	CHAR3	CHAR	3	0	Partial Sample for an Insp. Characteristic (Batch Input)
49	PRUEFQUALI	☐	QPRQUALIF	QPRQUALIF	CHAR	5	0	Inspector Qualification	*
50	MERKGEW	☐	QMERKGEW	QMERKKLAS	CHAR	2	0	Weighting of the Characteristic	*
51	EEANTVERF	☐	QEANTVERF	QEANTVERF	CHAR	2	0	Fraction Calculation	*
52	PSNFH	☐	PSNFH_BI	CHAR4	CHAR	4	0	Item number of the production resource/tool (batch input)
53	DUMMY10	☐	QTXT10	QTXT10	CHAR	10	0	Text Line for Additional Information
54	DUMMY20	☐	QTXT20	QTXT20	CHAR	20	0	Text Line for Additional Information
55	DUMMY40	☐	QTXT40	QTXT40	CHAR	40	0	Text Line for Additional Information
56	STICHPRVER	☐	QSTICHVERF	QSTPRVER	CHAR	8	0	Sampling Procedure in Inspection Characteristic	*
57	PROBEMGEH	☐	QPROBME_C	CHAR3	CHAR	3	0	Sample Unit of Measure (Batch Input)
58	PRUEFEINH	☐	QPROBEFAKC	CHAR6	CHAR	6	0	Sample Quantity Factor for Sample (Batch Input)
59	SPCKRIT	☐	QSPCKRIT	QSPCKRIT	CHAR	3	0	SPC Criterion	*
60	DYNMERKREF	☐	QMERKDYN_C	CHAR4	CHAR	4	0	Tlist Characteristic, Whose Q-Level Is Copied (Batch Input)
61	QDYNREGEL	☐	QDYNREGEL	QDYNREGEL	CHAR	3	0	Dynamic Modification Rule	*
62	LIEFKZ	☐	QLIFKZ	QKZ	CHAR	1	0	Vendor Considered for Dynamic Modification
63	HERSTKZ	☐	QHERSTKZ	QKZ	CHAR	1	0	Manufacturer Considered for Dynamic Modification
64	KUNDKZ	☐	QKUNDKZ	QKZ	CHAR	1	0	Customer Considered for Dynamic Modification
65	STELLEN	☐	QSTELLEN_C	CHAR2	CHAR	2	0	No. of Decimal Places (Batch Input)
66	MASSEINHSW	☐	QMGEH6	MSEC6	CHAR	6	0	Measurement Unit in Which Quantitative Data Is Maintained	*
67	SOLLWERT	☐	QSOLLWERTC	QSOLLWERTC	CHAR	16	0	Target Value for a Quantitative Characteristic
68	TOLERANZOB	☐	QTOLOBC	QSOLLWERTC	CHAR	16	0	Upper Specification Limit
69	TOLERANZUN	☐	QTOLUNC	QSOLLWERTC	CHAR	16	0	Lower Specification Limit
70	KLASANZAHL	☐	QKLASSZAHC	CHAR3	CHAR	3	0	Number of Value Classes for Inspection Results
71	KLASBREITE	☐	QKLASSBRC	QSOLLWERTC	CHAR	16	0	Class Width
72	KLASMITTE	☐	QKLASMITC	QSOLLWERTC	CHAR	16	0	Class Midpoint
73	GRENZEOB1	☐	QGRENZO1C	QSOLLWERTC	CHAR	16	0	First Upper Specification Limit
74	GRENZEUN1	☐	QGRENZU1C	QSOLLWERTC	CHAR	16	0	First Lower Specification Limit
75	GRENZEOB2	☐	QGRENZO2C	QSOLLWERTC	CHAR	16	0	Second Upper Specification Limit
76	GRENZEUN2	☐	QGRENZU2C	QSOLLWERTC	CHAR	16	0	Second Lower Specification Limit
77	PLAUSIOBEN	☐	QPLAUSIOBC	QSOLLWERTC	CHAR	16	0	Upper Plausibility Limit
78	PLAUSIUNTE	☐	QPLAUSIUNC	QSOLLWERTC	CHAR	16	0	Lower Plausibility Limit
79	TOLERWEIOB	☐	QTOLWOBC	QSOLLWERTC	CHAR	16	0	Change to Upper Specification Limit
80	TOLERWEIUN	☐	QTOLWUNC	QSOLLWERTC	CHAR	16	0	Change to Lower Specification Limit
81	TOLERWAB	☐	QTOLWAB_C	CHAR10	CHAR	10	0	Date, from Which the Tolerance Change Is Valid (Batch Input)
82	TOLERWBIS	☐	QTOLWBIS_C	CHAR10	CHAR	10	0	Date, to Which the Tolerance Change Is Valid (Batch Input)
83	FORMELSL	☐	QFORMELSL	QFORMELSL	CHAR	1	0	Check and Calculate Formula in QM
84	FORMEL1	☐	QFORMEL	QFORMEL	CHAR	60	0	Formula Field
85	FORMEL2	☐	QFORMEL	QFORMEL	CHAR	60	0	Formula Field
86	CODEGRQUAL	☐	QCODEGRPQL	QCODEGRP	CHAR	8	0	Defect Code Group for General Rejection	*
87	CODEQUAL	☐	QCODEQL	QCODE	CHAR	4	0	Defect Code for Rejection: General	*
88	CODEGR9U	☐	QCODEGRPU	QCODEGRP	CHAR	8	0	Defect Code Group for Rejection at Lower Tolerance	*
89	CODE9U	☐	QCODEU	QCODE	CHAR	4	0	Defect Code for Rejection at Lower Specification Limit	*
90	CODEGR9O	☐	QCODEGRPO	QCODEGRP	CHAR	8	0	Defect Code Group for Rejection at Upper Tolerance	*
91	CODE9O	☐	QCODEO	QCODE	CHAR	4	0	Defect Code for Rejection at Upper Specification Limit	*
92	KATAB1	☐	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
93	KATALGART1	☐	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
94	AUSWMENGE1	☐	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
95	AUSWMGWRK1	☐	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
96	KATAB2	☐	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
97	KATALGART2	☐	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
98	AUSWMENGE2	☐	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
99	AUSWMGWRK2	☐	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
100	KATAB3	☐	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
101	KATALGART3	☐	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
102	AUSWMENGE3	☐	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
103	AUSWMGWRK3	☐	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
104	KATAB4	☐	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
105	KATALGART4	☐	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
106	AUSWMENGE4	☐	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
107	AUSWMGWRK4	☐	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
108	KATAB5	☐	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
109	KATALGART5	☐	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
110	AUSWMENGE5	☐	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
111	AUSWMGWRK5	☐	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
112	INPPROC	☐	QINPPROC	CHAR3	CHAR	3	0	Parameters for Input Processing in QM Results Recording

History

Last changed by/on	SAP	20130529
SAP Release Created in