Data Element list used by SAP ABAP Table MRTRSS_PLMKD (RMS-MRTRS : Inspection Plan Characteristics (Display))
SAP ABAP Table 
MRTRSS_PLMKD (RMS-MRTRS : Inspection Plan Characteristics (Display)) is using
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Data Element |
AENNR | Change Number | |
| 2 | Data Element |
ANDAT | Date Record Created on | |
| 3 | Data Element |
ANNAM | User Who Created Record | |
| 4 | Data Element |
ATBEZ | Characteristic description | |
| 5 | Data Element |
ATINN | Internal characteristic | |
| 6 | Data Element |
CIM_COUNT | Internal counter | |
| 7 | Data Element |
DATUB | Valid-to date | |
| 8 | Data Element |
DATUV | Valid-From Date | |
| 9 | Data Element |
FLGSEL | Version is valid on key date entered | |
| 10 | Data Element |
LKENZ | Deletion Indicator | |
| 11 | Data Element |
MANDT | Client | |
| 12 | Data Element |
MW_ENTRY | Dependent Charac. Specs Available for Characteristic | |
| 13 | Data Element |
PARKZ | Indicator: inactive changes | |
| 14 | Data Element |
PLNAL | Group Counter | |
| 15 | Data Element |
PLNKN | Number of the task list node | |
| 16 | Data Element |
PLNNR | Key for Task List Group | |
| 17 | Data Element |
PLNTY | Task List Type | |
| 18 | Data Element |
QAENDERER | Name of User who Most Recently Changed the Data Record | |
| 19 | Data Element |
QATNAM | Name of the Class Characteristic | |
| 20 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 21 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 22 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 23 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 24 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 25 | Data Element |
QCHARACT_ID1 | Characteristic Description for Quality Data Exchange | |
| 26 | Data Element |
QCODEGRPO | Defect Code Group for Rejection at Upper Tolerance | |
| 27 | Data Element |
QCODEGRPQL | Defect Code Group for General Rejection | |
| 28 | Data Element |
QCODEGRPU | Defect Code Group for Rejection at Lower Tolerance | |
| 29 | Data Element |
QCODEO | Defect Code for Rejection at Upper Specification Limit | |
| 30 | Data Element |
QCODEQL | Defect Code for Rejection: General | |
| 31 | Data Element |
QCODEU | Defect Code for Rejection at Lower Specification Limit | |
| 32 | Data Element |
QDATUMAEND | Date on Which Data Record Was Changed | |
| 33 | Data Element |
QDYNREGEL | Dynamic Modification Rule | |
| 34 | Data Element |
QDYNSTRING | String for Dynamic Modification Criteria (Database Relevant) | |
| 35 | Data Element |
QEANTVERF | Fraction Calculation | |
| 36 | Data Element |
QERGDATHPL | Planned Results Data Origin | |
| 37 | Data Element |
QFORMEL | Formula Field | |
| 38 | Data Element |
QFORMEL | Formula Field | |
| 39 | Data Element |
QFORMELSL | Check and Calculate Formula in QM | |
| 40 | Data Element |
QGRENZOB1 | First Upper Specification Limit | |
| 41 | Data Element |
QGRENZOB2 | Second Upper Specification Limit | |
| 42 | Data Element |
QGRENZUN1 | First Lower Specification Limit | |
| 43 | Data Element |
QGRENZUN2 | Second Lower Specification Limit | |
| 44 | Data Element |
QINPPROC | Parameters for Input Processing in QM Results Recording | |
| 45 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 46 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 47 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 48 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 49 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 50 | Data Element |
QKLASSBR | Class Width | |
| 51 | Data Element |
QKLASSMIT | Class Midpoint | |
| 52 | Data Element |
QKLASSZAHL | Number of Value Classes for Inspection Results | |
| 53 | Data Element |
QKTTAB | Catalog Entry Is a Selected Set | |
| 54 | Data Element |
QKTTAB | Catalog Entry Is a Selected Set | |
| 55 | Data Element |
QKTTAB | Catalog Entry Is a Selected Set | |
| 56 | Data Element |
QKTTAB | Catalog Entry Is a Selected Set | |
| 57 | Data Element |
QKTTAB | Catalog Entry Is a Selected Set | |
| 58 | Data Element |
QKURZTEXT | Short Text | |
| 59 | Data Element |
QKZEINSTMK | Characteristic Type | |
| 60 | Data Element |
QKZPRZIEH | Physical-Sample-Drawing Text Exists | |
| 61 | Data Element |
QKZQULMK | Qualitative Characteristic | |
| 62 | Data Element |
QKZQUNMK | Quantitative Characteristic | |
| 63 | Data Element |
QKZUMFS | Multiple Samples | |
| 64 | Data Element |
QKZ_REF | Reference to Master Insp. Characteristic in Task List | |
| 65 | Data Element |
QLTEXTKZ | Inspection Characteristic Long Text Exists | |
| 66 | Data Element |
QMASSEH | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 67 | Data Element |
QMERKDYN | Characteristic (in Plan) whose Q-Level Will Be Copied | |
| 68 | Data Element |
QMERKGEW | Weighting of the Characteristic | |
| 69 | Data Element |
QMERKNR | Master Inspection Characteristics | |
| 70 | Data Element |
QMERKNRP | Inspection Characteristic Number | |
| 71 | Data Element |
QMIP_CHAORIG_ID | Original Identification for Characteristic | |
| 72 | Data Element |
QMKCONTROL | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
| 73 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 74 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 75 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 76 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 77 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 78 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 79 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 80 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 81 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 82 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 83 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 84 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 85 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 86 | Data Element |
QPLAUSIOB | Upper Plausibility Limit | |
| 87 | Data Element |
QPLAUSIUN | Lower Plausibility Limit | |
| 88 | Data Element |
QPMETHODE | Inspection Method | |
| 89 | Data Element |
QPROBEFAK | Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.) | |
| 90 | Data Element |
QPROBEPL | Partial Sample No. for Inspection Charac. in Task List | |
| 91 | Data Element |
QPROBME | Sample Unit of Measure | |
| 92 | Data Element |
QPRQUALIF | Inspector Qualification | |
| 93 | Data Element |
QPZLFH | Assigned Test Equipment | |
| 94 | Data Element |
QP_CHAORIG | Inspection Characteristic Origin | |
| 95 | Data Element |
QP_CHAORIG_GUID | Reference to Characteristic That Was Adopted | |
| 96 | Data Element |
QP_CTRMETH | Control Method | |
| 97 | Data Element |
QP_NO_INSPECTION | Do Not Copy Inspection Characteristic to Inspection Lot | |
| 98 | Data Element |
QP_RESPLAN | Response Plan | |
| 99 | Data Element |
QSOLLWERTC | Target Value for a Quantitative Characteristic | |
| 100 | Data Element |
QSOLLWERTE | Target Value for a Quantitative Characteristic | |
| 101 | Data Element |
QSPCKRIT | SPC Criterion | |
| 102 | Data Element |
QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 103 | Data Element |
QSTEUERKZ | Key Containing Preset Characteristic Control Indicators | |
| 104 | Data Element |
QSTICHVERF | Sampling Procedure in Inspection Characteristic | |
| 105 | Data Element |
QTOLERANZ | Tolerance Key | |
| 106 | Data Element |
QTOLOB | Upper Specification Limit | |
| 107 | Data Element |
QTOLOBC | Upper Specification Limit | |
| 108 | Data Element |
QTOLUN | Lower Tolerance Limit | |
| 109 | Data Element |
QTOLUNC | Lower Specification Limit | |
| 110 | Data Element |
QTOLWAB | Date from Which the Tolerance Change Is Valid | |
| 111 | Data Element |
QTOLWBIS | Date Until Which the Tolerance Change Is Valid | |
| 112 | Data Element |
QTOLWOB | Change to Upper Specification Limit | |
| 113 | Data Element |
QTOLWUN | Change to Lower Specification Limit | |
| 114 | Data Element |
QTXT10 | Text Line for Additional Information | |
| 115 | Data Element |
QTXT20 | Text Line for Additional Information | |
| 116 | Data Element |
QTXT40 | Text Line for Additional Information | |
| 117 | Data Element |
QTXTMETHOD | Short Text for Inspection Method | |
| 118 | Data Element |
QTXTSMPPRO | Short Text for the Sampling Procedure | |
| 119 | Data Element |
QTXT_CHA | Short Text for Inspection Characteristic | |
| 120 | Data Element |
QTXT_CODE | Short Text for Code | |
| 121 | Data Element |
QTXT_CODE | Short Text for Code | |
| 122 | Data Element |
QTXT_CODE | Short Text for Code | |
| 123 | Data Element |
QTXT_GROUP | Short Text for the Code Group/Selected Set | |
| 124 | Data Element |
QTXT_GROUP | Short Text for the Code Group/Selected Set | |
| 125 | Data Element |
QTXT_GROUP | Short Text for the Code Group/Selected Set | |
| 126 | Data Element |
QTXT_GROUP | Short Text for the Code Group/Selected Set | |
| 127 | Data Element |
QTXT_GROUP | Short Text for the Code Group/Selected Set | |
| 128 | Data Element |
QUMREN | Factor for Converting MatUnitOfMeasure to SampUnitOfMeasure | |
| 129 | Data Element |
QUMRENPME | Factor for Converting SampUnitOfMeasure to MatUnitOfMeasure | |
| 130 | Data Element |
QVERSDAT | Key Date for Version Selection | |
| 131 | Data Element |
QVERSDAT | Key Date for Version Selection | |
| 132 | Data Element |
QVERSDAT | Key Date for Version Selection | |
| 133 | Data Element |
QVERSDAT | Key Date for Version Selection | |
| 134 | Data Element |
QVERSDAT | Key Date for Version Selection | |
| 135 | Data Element |
QVERSDAT | Key Date for Version Selection | |
| 136 | Data Element |
QVERSNR | Version Number | |
| 137 | Data Element |
QVERSNR | Version Number | |
| 138 | Data Element |
QVERSNR | Version Number | |
| 139 | Data Element |
QVERSNR | Version Number | |
| 140 | Data Element |
QVERSNR | Version Number | |
| 141 | Data Element |
QVERSNR | Version Number | |
| 142 | Data Element |
QVERSNR | Version Number | |
| 143 | Data Element |
QVERSNRMK | Version Number of the Master Inspection Characteristic | |
| 144 | Data Element |
QVERSNRPM | Version Number of the Inspection Method | |
| 145 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 146 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 147 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 148 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 149 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 150 | Data Element |
QZAEHLER | Plant for the Master Inspection Characteristic | |
| 151 | Data Element |
Q_METH_PLANT | Plant for Inspection Method | |
| 152 | Data Element |
SPRAS | Language Key | |
| 153 | Data Element |
SPRAS | Language Key | |
| 154 | Data Element |
TECHV | Technical status from | |
| 155 | Data Element |
VAL_TEXT | Short Text for Fixed Values | |
| 156 | Data Element |
VBKZ | Update indicator | |
| 157 | Data Element |
WERKS_D | Plant |
