Data Element list used by SAP ABAP Table CHA_CLASS_DATA (Data for the class of inspection charcteristics)
SAP ABAP Table CHA_CLASS_DATA (Data for the class of inspection charcteristics) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
1 | Data Element | AENNR | Change Number | |
2 | Data Element | ANDAT | Date Record Created on | |
3 | Data Element | ANNAM | User Who Created Record | |
4 | Data Element | ATINN | Internal characteristic | |
5 | Data Element | CHA_LOCK | Inspection Characteristic Is Locked | |
6 | Data Element | CIM_COUNT | Internal counter | |
7 | Data Element | CPCS_ECN_TO | To change number | |
8 | Data Element | DATUB | Valid-to date | |
9 | Data Element | DATUV | Valid-From Date | |
10 | Data Element | FHMNR | Production resource/tool number | |
11 | Data Element | HANDLE | Internal ID of an object | |
12 | Data Element | LKENZ | Deletion Indicator | |
13 | Data Element | MANDT | Client | |
14 | Data Element | OPRID | Operation ID | |
15 | Data Element | OPR_HER | Origin of an operation | |
16 | Data Element | OPR_REFID | Operation ID of the referenced operation | |
17 | Data Element | PARKZ | Indicator: inactive changes | |
18 | Data Element | PLNAL | Group Counter | |
19 | Data Element | PLNFOLGE | Sequence | |
20 | Data Element | PLNKN | Number of the task list node | |
21 | Data Element | PLNNR | Key for Task List Group | |
22 | Data Element | PLNTY | Task List Type | |
23 | Data Element | PSNFH | Item Number for Production Resource/Tool | |
24 | Data Element | QADDPRO | Sample Quantity Is Added | |
25 | Data Element | QAENDERER | Name of User who Most Recently Changed the Data Record | |
26 | Data Element | QATNAM | Name of the Class Characteristic | |
27 | Data Element | QAUSSLOS | Characteristic Relevant for Qual. Score and Scrap Share | |
28 | Data Element | QBFHLZHL | Recording the Number of Defects | |
29 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
30 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
31 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
32 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
33 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
34 | Data Element | QCHARACT_ID1 | Characteristic Description for Quality Data Exchange | |
35 | Data Element | QCODEGRPO | Defect Code Group for Rejection at Upper Tolerance | |
36 | Data Element | QCODEGRPQL | Defect Code Group for General Rejection | |
37 | Data Element | QCODEGRPU | Defect Code Group for Rejection at Lower Tolerance | |
38 | Data Element | QCODEO | Defect Code for Rejection at Upper Specification Limit | |
39 | Data Element | QCODEQL | Defect Code for Rejection: General | |
40 | Data Element | QCODEU | Defect Code for Rejection at Lower Specification Limit | |
41 | Data Element | QDATUMAEND | Date on Which Data Record Was Changed | |
42 | Data Element | QDOKUKZ | Documentation Required for Inspection Results | |
43 | Data Element | QDRUCK1 | ||
44 | Data Element | QDYNHEAD | Level at Which Dynamic Modification Parameters Are Defined | |
45 | Data Element | QDYNREGEL | Dynamic Modification Rule | |
46 | Data Element | QDYNSTRING | String for Dynamic Modification Criteria (Database Relevant) | |
47 | Data Element | QEANTVERF | Fraction Calculation | |
48 | Data Element | QERGDATHPL | Planned Results Data Origin | |
49 | Data Element | QESTUKZ | Recording Type | |
50 | Data Element | QFEHLREC | Defects Recording Automatically Called Up | |
51 | Data Element | QFORMEL | Formula Field | |
52 | Data Element | QFORMEL | Formula Field | |
53 | Data Element | QFORMELSL | Check and Calculate Formula in QM | |
54 | Data Element | QGRENZOB1 | First Upper Specification Limit | |
55 | Data Element | QGRENZOB2 | Second Upper Specification Limit | |
56 | Data Element | QGRENZUN1 | First Lower Specification Limit | |
57 | Data Element | QGRENZUN2 | Second Lower Specification Limit | |
58 | Data Element | QHERSTKZ | Manufacturer Considered for Dynamic Modification | |
59 | Data Element | QINPPROC | Parameters for Input Processing in QM Results Recording | |
60 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
61 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
62 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
63 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
64 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
65 | Data Element | QKLASSBR | Class Width | |
66 | Data Element | QKLASSMIT | Class Midpoint | |
67 | Data Element | QKLASSZAHL | Number of Value Classes for Inspection Results | |
68 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
69 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
70 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
71 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
72 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
73 | Data Element | QKUNDKZ | Customer Considered for Dynamic Modification | |
74 | Data Element | QKZAENBEL | Create Change Documents During Results Recording | |
75 | Data Element | QKZDESTROY | Destructive Inspection | |
76 | Data Element | QKZEINSTMK | Characteristic Type | |
77 | Data Element | QKZFORMEL | Calculated Characteristic | |
78 | Data Element | QKZPKAT | Reference to Characteristic Attribute Required | |
79 | Data Element | QKZPROCCHAR | Process Characteristic | |
80 | Data Element | QKZPRZIEH | Physical-Sample-Drawing Text Exists | |
81 | Data Element | QKZQUMK | Measured Values Must Be Recorded | |
82 | Data Element | QKZQUNMK | Quantitative Characteristic | |
83 | Data Element | QKZSOLLPR | Check Target Value | |
84 | Data Element | QKZTOLOB | Upper Specification Limit | |
85 | Data Element | QKZTOLUN | Lower Specification Limit | |
86 | Data Element | QKZUMFS | Multiple Samples | |
87 | Data Element | QKZ_REF | Reference to Master Insp. Characteristic in Task List | |
88 | Data Element | QLEITSTKZ | Control Characteristics Results - QM Subsystem | |
89 | Data Element | QLIFKZ | Vendor Considered for Dynamic Modification | |
90 | Data Element | QLTEXTKZ | Inspection Characteristic Long Text Exists | |
91 | Data Element | QLZEITKZ | Long-Term Inspection | |
92 | Data Element | QMASCHKZ | Machine Considered for Dynamic Modification | |
93 | Data Element | QMASSEH | Unit of Measurement, in Which Quantitative Data Is Stored | |
94 | Data Element | QMATKZ | Material Considered for Dynamic Modification | |
95 | Data Element | QMERKDYN | Characteristic (in Plan) whose Q-Level Will Be Copied | |
96 | Data Element | QMERKGEW | Weighting of the Characteristic | |
97 | Data Element | QMERKNR | Master Inspection Characteristics | |
98 | Data Element | QMERKNRP | Inspection Characteristic Number | |
99 | Data Element | QMIP_CHAORIG_ID | Original Identification for Characteristic | |
100 | Data Element | QMKCONTROL | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
101 | Data Element | QNAENDKZ | Default Control Indicators Cannot Be Changed | |
102 | Data Element | QNINITIAL | Value Not Initial if Set | |
103 | Data Element | QNINITIAL | Value Not Initial if Set | |
104 | Data Element | QNINITIAL | Value Not Initial if Set | |
105 | Data Element | QNINITIAL | Value Not Initial if Set | |
106 | Data Element | QNINITIAL | Value Not Initial if Set | |
107 | Data Element | QNINITIAL | Value Not Initial if Set | |
108 | Data Element | QNINITIAL | Value Not Initial if Set | |
109 | Data Element | QNINITIAL | Value Not Initial if Set | |
110 | Data Element | QNINITIAL | Value Not Initial if Set | |
111 | Data Element | QNINITIAL | Value Not Initial if Set | |
112 | Data Element | QNINITIAL | Value Not Initial if Set | |
113 | Data Element | QNINITIAL | Value Not Initial if Set | |
114 | Data Element | QNINITIAL | Value Not Initial if Set | |
115 | Data Element | QPARA | Control Indicator "Parameter Characteristic" Set/Not Set | |
116 | Data Element | QPLAUSIOB | Upper Plausibility Limit | |
117 | Data Element | QPLAUSIUN | Lower Plausibility Limit | |
118 | Data Element | QPMETHODE | Inspection Method | |
119 | Data Element | QPMZWANG | Assignment of Test Equipment Required | |
120 | Data Element | QPROBEFAK | Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.) | |
121 | Data Element | QPROBEPL | Partial Sample No. for Inspection Charac. in Task List | |
122 | Data Element | QPROBME | Sample Unit of Measure | |
123 | Data Element | QPROKZ | Project Considered for Dynamic Modification | |
124 | Data Element | QPRQUALIF | Inspector Qualification | |
125 | Data Element | QPUMFKZ | Inspection Scope | |
126 | Data Element | QPZLFH | Assigned Test Equipment | |
127 | Data Element | QP_CHAORIG | Inspection Characteristic Origin | |
128 | Data Element | QP_CHAORIG_GUID | Reference to Characteristic That Was Adopted | |
129 | Data Element | QP_CTRMETH | Control Method | |
130 | Data Element | QP_NO_INSPECTION | Do Not Copy Inspection Characteristic to Inspection Lot | |
131 | Data Element | QP_RESPLAN | Response Plan | |
132 | Data Element | QRZWANG | Characteristic Category | |
133 | Data Element | QSLWBEZ | Identification for the Inspection Point Field Combination | |
134 | Data Element | QSOLLWERTE | Target Value for a Quantitative Characteristic | |
135 | Data Element | QSPCKRIT | SPC Criterion | |
136 | Data Element | QSPCMK | SPC Characteristic | |
137 | Data Element | QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
138 | Data Element | QSTEUERKZ | Key Containing Preset Characteristic Control Indicators | |
139 | Data Element | QSTICHPR | Sampling Procedure is Required | |
140 | Data Element | QSTICHVERF | Sampling Procedure in Inspection Characteristic | |
141 | Data Element | QSYNCRO | Synchronization is Active | |
142 | Data Element | QTOLERANZ | Tolerance Key | |
143 | Data Element | QTOLOB | Upper Specification Limit | |
144 | Data Element | QTOLUN | Lower Tolerance Limit | |
145 | Data Element | QTOLWAB | Date from Which the Tolerance Change Is Valid | |
146 | Data Element | QTOLWBIS | Date Until Which the Tolerance Change Is Valid | |
147 | Data Element | QTOLWOB | Change to Upper Specification Limit | |
148 | Data Element | QTOLWUN | Change to Lower Specification Limit | |
149 | Data Element | QTXT10 | Text Line for Additional Information | |
150 | Data Element | QTXT20 | Text Line for Additional Information | |
151 | Data Element | QTXT40 | Text Line for Additional Information | |
152 | Data Element | QTXTSMPPRO | Short Text for the Sampling Procedure | |
153 | Data Element | QTXT_CHA | Short Text for Inspection Characteristic | |
154 | Data Element | QTXT_CHA | Short Text for Inspection Characteristic | |
155 | Data Element | QUMREN | Factor for Converting MatUnitOfMeasure to SampUnitOfMeasure | |
156 | Data Element | QUMRENPME | Factor for Converting SampUnitOfMeasure to MatUnitOfMeasure | |
157 | Data Element | QVERSDAT | Key Date for Version Selection | |
158 | Data Element | QVERSDAT | Key Date for Version Selection | |
159 | Data Element | QVERSDAT | Key Date for Version Selection | |
160 | Data Element | QVERSDAT | Key Date for Version Selection | |
161 | Data Element | QVERSDAT | Key Date for Version Selection | |
162 | Data Element | QVERSDAT | Key Date for Version Selection | |
163 | Data Element | QVERSNR | Version Number | |
164 | Data Element | QVERSNR | Version Number | |
165 | Data Element | QVERSNR | Version Number | |
166 | Data Element | QVERSNR | Version Number | |
167 | Data Element | QVERSNR | Version Number | |
168 | Data Element | QVERSNR | Version Number | |
169 | Data Element | QVERSNR | Version Number | |
170 | Data Element | QVERSNRMK | Version Number of the Master Inspection Characteristic | |
171 | Data Element | QVERSNRPM | Version Number of the Inspection Method | |
172 | Data Element | QVORGAEND | Specifications Can Be Changed | |
173 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
174 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
175 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
176 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
177 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
178 | Data Element | QZAEHLER | Plant for the Master Inspection Characteristic | |
179 | Data Element | Q_METH_PLANT | Plant for Inspection Method | |
180 | Data Element | SPRAS | Language Key | |
181 | Data Element | SPRAS | Language Key | |
182 | Data Element | TECHV | Technical status from | |
183 | Data Element | TXTZ1 | First line of text for production resources/tools | |
184 | Data Element | VORNR | Operation/Activity Number | |
185 | Data Element | VPLNAL | Group counter of the referenced task list | |
186 | Data Element | VPLNNR | Group of the referenced task list | |
187 | Data Element | VPLNTY | Type of the referenced task list |