Data Element list used by SAP ABAP Table BAPI1012_CHA_C (Inspection Characteristics in CREATE-BAPI for Routings)
SAP ABAP Table 
BAPI1012_CHA_C (Inspection Characteristics in CREATE-BAPI for Routings) is using
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Data Element |
AENNR | Change Number | |
| 2 | Data Element |
CPCS_ECN_TO | To change number | |
| 3 | Data Element |
DATUB | Valid-to date | |
| 4 | Data Element |
DATUV | Valid-From Date | |
| 5 | Data Element |
ISOCD_UNIT | ISO code for unit of measurement | |
| 6 | Data Element |
ISOCD_UNIT | ISO code for unit of measurement | |
| 7 | Data Element |
LKENZ | Deletion Indicator | |
| 8 | Data Element |
OPRID | Operation ID | |
| 9 | Data Element |
PLNAL | Group Counter | |
| 10 | Data Element |
PLNFOLGE | Sequence | |
| 11 | Data Element |
PLNNR | Key for Task List Group | |
| 12 | Data Element |
PSNFH | Item Number for Production Resource/Tool | |
| 13 | Data Element |
QADDPRO | Sample Quantity Is Added | |
| 14 | Data Element |
QAUSSLOS | Characteristic Relevant for Qual. Score and Scrap Share | |
| 15 | Data Element |
QBFHLZHL | Recording the Number of Defects | |
| 16 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 17 | Data Element |
QCHARACT_ID1 | Characteristic Description for Quality Data Exchange | |
| 18 | Data Element |
QCODEGR | Assigned Code Group | |
| 19 | Data Element |
QCODEGR | Assigned Code Group | |
| 20 | Data Element |
QCODEGR | Assigned Code Group | |
| 21 | Data Element |
QCODEGR | Assigned Code Group | |
| 22 | Data Element |
QCODEGRPO | Defect Code Group for Rejection at Upper Tolerance | |
| 23 | Data Element |
QCODEGRPQL | Defect Code Group for General Rejection | |
| 24 | Data Element |
QCODEGRPU | Defect Code Group for Rejection at Lower Tolerance | |
| 25 | Data Element |
QCODEO | Defect Code for Rejection at Upper Specification Limit | |
| 26 | Data Element |
QCODEQL | Defect Code for Rejection: General | |
| 27 | Data Element |
QCODEU | Defect Code for Rejection at Lower Specification Limit | |
| 28 | Data Element |
QDOKUKZ | Documentation Required for Inspection Results | |
| 29 | Data Element |
QDRUCK1 | ||
| 30 | Data Element |
QDYNREGEL | Dynamic Modification Rule | |
| 31 | Data Element |
QEANTVERF | Fraction Calculation | |
| 32 | Data Element |
QERGDATHPL | Planned Results Data Origin | |
| 33 | Data Element |
QESTUKZ | Recording Type | |
| 34 | Data Element |
QFEHLREC | Defects Recording Automatically Called Up | |
| 35 | Data Element |
QFORMEL | Formula Field | |
| 36 | Data Element |
QFORMEL | Formula Field | |
| 37 | Data Element |
QFORMELSL | Check and Calculate Formula in QM | |
| 38 | Data Element |
QGRENZO1C | First Upper Specification Limit | |
| 39 | Data Element |
QGRENZO2C | Second Upper Specification Limit | |
| 40 | Data Element |
QGRENZU1C | First Lower Specification Limit | |
| 41 | Data Element |
QGRENZU2C | Second Lower Specification Limit | |
| 42 | Data Element |
QHERSTKZ | Manufacturer Considered for Dynamic Modification | |
| 43 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 44 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 45 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 46 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 47 | Data Element |
QKLASMITC | Class Midpoint | |
| 48 | Data Element |
QKLASSBRC | Class Width | |
| 49 | Data Element |
QKLASSZAHL | Number of Value Classes for Inspection Results | |
| 50 | Data Element |
QKUNDKZ | Customer Considered for Dynamic Modification | |
| 51 | Data Element |
QKZAENBEL | Create Change Documents During Results Recording | |
| 52 | Data Element |
QKZDESTROY | Destructive Inspection | |
| 53 | Data Element |
QKZFORMEL | Calculated Characteristic | |
| 54 | Data Element |
QKZPKAT | Reference to Characteristic Attribute Required | |
| 55 | Data Element |
QKZQUMK | Measured Values Must Be Recorded | |
| 56 | Data Element |
QKZQUNMK | Quantitative Characteristic | |
| 57 | Data Element |
QKZSOLLPR | Check Target Value | |
| 58 | Data Element |
QKZTOLOB | Upper Specification Limit | |
| 59 | Data Element |
QKZTOLUN | Lower Specification Limit | |
| 60 | Data Element |
QLIFKZ | Vendor Considered for Dynamic Modification | |
| 61 | Data Element |
QLZEITKZ | Long-Term Inspection | |
| 62 | Data Element |
QMERKDYN | Characteristic (in Plan) whose Q-Level Will Be Copied | |
| 63 | Data Element |
QMERKGEW | Weighting of the Characteristic | |
| 64 | Data Element |
QMERKNR | Master Inspection Characteristics | |
| 65 | Data Element |
QMERKNRP | Inspection Characteristic Number | |
| 66 | Data Element |
QMGEH6 | Measurement Unit in Which Quantitative Data Is Maintained | |
| 67 | Data Element |
QPLAUSIOBC | Upper Plausibility Limit | |
| 68 | Data Element |
QPLAUSIUNC | Lower Plausibility Limit | |
| 69 | Data Element |
QPMETHODE | Inspection Method | |
| 70 | Data Element |
QPMK_IMPORT_MODUS | Mode for Reference to Master Inspection Characteristic | |
| 71 | Data Element |
QPMZWANG | Assignment of Test Equipment Required | |
| 72 | Data Element |
QPROBEFAK | Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.) | |
| 73 | Data Element |
QPROBEPL | Partial Sample No. for Inspection Charac. in Task List | |
| 74 | Data Element |
QPROBME | Sample Unit of Measure | |
| 75 | Data Element |
QPRQUALIF | Inspector Qualification | |
| 76 | Data Element |
QPUMFKZ | Inspection Scope | |
| 77 | Data Element |
QRZWANG | Characteristic Category | |
| 78 | Data Element |
QSOLLWERTC | Target Value for a Quantitative Characteristic | |
| 79 | Data Element |
QSPCKRIT | SPC Criterion | |
| 80 | Data Element |
QSPCMK | SPC Characteristic | |
| 81 | Data Element |
QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 82 | Data Element |
QSTEUERKZ | Key Containing Preset Characteristic Control Indicators | |
| 83 | Data Element |
QSTICHPR | Sampling Procedure is Required | |
| 84 | Data Element |
QSTICHVERF | Sampling Procedure in Inspection Characteristic | |
| 85 | Data Element |
QTOLERANZ | Tolerance Key | |
| 86 | Data Element |
QTOLOBC | Upper Specification Limit | |
| 87 | Data Element |
QTOLUNC | Lower Specification Limit | |
| 88 | Data Element |
QTXT10 | Text Line for Additional Information | |
| 89 | Data Element |
QTXT20 | Text Line for Additional Information | |
| 90 | Data Element |
QTXT40 | Text Line for Additional Information | |
| 91 | Data Element |
QTXT_CHA | Short Text for Inspection Characteristic | |
| 92 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 93 | Data Element |
Q_METH_PLANT | Plant for Inspection Method | |
| 94 | Data Element |
VORNR | Operation/Activity Number | |
| 95 | Data Element |
WERKS_D | Plant |
