Data Element list used by SAP ABAP Table QAQEE (Fields for inspection results recording)
SAP ABAP Table QAQEE (Fields for inspection results recording) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
1 | Data Element | FHKTX | Description of the production resource/tool | |
2 | Data Element | FHMNR | Production resource/tool number | |
3 | Data Element | QANDSICHTX | Short Text for Characteristic View that is Displayed Next | |
4 | Data Element | QANNEHMEN | Accept Characteristic (Partial Sample) | |
5 | Data Element | QANTEILC | Estimated Fraction of Nonconforming Units | |
6 | Data Element | QANTEILC | Estimated Fraction of Nonconforming Units | |
7 | Data Element | QANTEILOC | Estimated Fraction Above the Tolerance Range | |
8 | Data Element | QANTEILUC | Estimated Fraction Below the Tolerance Range | |
9 | Data Element | QANZFEHEH4 | Number of Nonconforming Sample Units | |
10 | Data Element | QANZFEHL1 | Number of Defects Found | |
11 | Data Element | QANZFEHL4 | Number of Defects Found | |
12 | Data Element | QANZPRO | Number of New Partial Samples for the Insp. Characteristic | |
13 | Data Element | QANZPROBAB | Current Sample in Dependent Multiple Samples | |
14 | Data Element | QANZPROBMA | Maximum Samples for Dependent Multiple Samples | |
15 | Data Element | QANZWERTG4 | Number of Inspected Sample Units | |
16 | Data Element | QANZWERTO4 | Number of Measured Values Above the Tolerance Range | |
17 | Data Element | QANZWERTP4 | Number of Single Results that Are Missing | |
18 | Data Element | QANZWERTU4 | Number of Measured Values Below the Tolerance Range | |
19 | Data Element | QATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
20 | Data Element | QATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
21 | Data Element | QATTTEXT | Description of Characteristic Attribute | |
22 | Data Element | QBEASTATUS | Results Record Status | |
23 | Data Element | QBELTXTKZ | Indicator: Long Text Available for Inspection Description | |
24 | Data Element | QCGRAUSWX | Assigned Code Group or Selected Set | |
25 | Data Element | QCHAR40 | Text String with a Length of 40 Characters | |
26 | Data Element | QCHAR80 | Text String with a Length of 80 Characters | |
27 | Data Element | QCHARTTYPE | Start with Graphic Type | |
28 | Data Element | QCODE | Code | |
29 | Data Element | QCODE | Code | |
30 | Data Element | QCODE | Code | |
31 | Data Element | QCODE | Code | |
32 | Data Element | QCODE | Code | |
33 | Data Element | QCODE | Code | |
34 | Data Element | QCODEGRP | Code Group | |
35 | Data Element | QCODEGRP | Code Group | |
36 | Data Element | QCODEGRP | Code Group | |
37 | Data Element | QCODEGRP | Code Group | |
38 | Data Element | QCODEGRP | Code Group | |
39 | Data Element | QCODEGRP | Code Group | |
40 | Data Element | QDBEWERTG | Valuation of the Characteristic for Dynamic Modification | |
41 | Data Element | QDIFF_DEC_PLACES | Different Number of Decimal Places | |
42 | Data Element | QDTEIL | Text: Documentation Required for the Material | |
43 | Data Element | QDYNPRO | Screen Number | |
44 | Data Element | QEEACTYP | Activity Type for Results Recording Transactions | |
45 | Data Element | QEINFELD | Field for Summarized Results or Single Results | |
46 | Data Element | QEINFELD | Field for Summarized Results or Single Results | |
47 | Data Element | QEINFELD | Field for Summarized Results or Single Results | |
48 | Data Element | QEINVORG | Only One Operation for the Lot Meets the Selection Criteria | |
49 | Data Element | QERFSICHT | Recording View | |
50 | Data Element | QERFSICHTSMAL | Limiting Options in the Recording View | |
51 | Data Element | QERF_SOF | Start Results Recording Using Automatic Selection | |
52 | Data Element | QERGDATH | Origin of Results Data | |
53 | Data Element | QESEL_MAN | Expand Worklist Manually | |
54 | Data Element | QE_TEXT_CLOSE | Text Style of Completed Items in Tree of QE51N | |
55 | Data Element | QE_TEXT_OPEN | Text Style of Open Items in Tree of QE51N | |
56 | Data Element | QFAKTOR | Factor for Scale Conversion of Measured Values | |
57 | Data Element | QFEHLKLAS | Defect class | |
58 | Data Element | QFKLWINAKT | Possible Entry for Defect Class is Active | |
59 | Data Element | QFKTCALL | Transaction is Called Up as Function Module | |
60 | Data Element | QFRAERGEBN | Inspection Results | |
61 | Data Element | QFRAVORGAB | Specifications for the Inspection | |
62 | Data Element | QGRAFIKON | Start with Graphic | |
63 | Data Element | QGRENZO1C | First Upper Specification Limit | |
64 | Data Element | QGRENZO2C | Second Upper Specification Limit | |
65 | Data Element | QGRENZU1C | First Lower Specification Limit | |
66 | Data Element | QGRENZU2C | Second Lower Specification Limit | |
67 | Data Element | QIMAGE_NAME | Screen in Results Recording | |
68 | Data Element | QINPPROC_READY | Input Processing Successfully Completed | |
69 | Data Element | QISTWERTC | Mean Value Field | |
70 | Data Element | QIVARIANZC | Internal Dispersion of Valid Measured Values | |
71 | Data Element | QKATALGKZ | Catalog Confirmations Available | |
72 | Data Element | QKLASMITC | Class Midpoint | |
73 | Data Element | QKLASSBRC | Class Width | |
74 | Data Element | QKLSGRNZOC | Upper Class Limit (Not Considered) | |
75 | Data Element | QKLSGRNZUC | Lower Class Limit (Considered) | |
76 | Data Element | QKURZTEXT | Short Text | |
77 | Data Element | QKURZTEXT | Short Text | |
78 | Data Element | QKURZTEXT | Short Text | |
79 | Data Element | QKURZTEXT | Short Text | |
80 | Data Element | QKZ | X and Blank (Indicator) | |
81 | Data Element | QKZ | X and Blank (Indicator) | |
82 | Data Element | QKZ | X and Blank (Indicator) | |
83 | Data Element | QKZ | X and Blank (Indicator) | |
84 | Data Element | QKZ | X and Blank (Indicator) | |
85 | Data Element | QKZ | X and Blank (Indicator) | |
86 | Data Element | QKZ | X and Blank (Indicator) | |
87 | Data Element | QKZ | X and Blank (Indicator) | |
88 | Data Element | QKZ | X and Blank (Indicator) | |
89 | Data Element | QKZ | X and Blank (Indicator) | |
90 | Data Element | QKZ | X and Blank (Indicator) | |
91 | Data Element | QKZ | X and Blank (Indicator) | |
92 | Data Element | QKZ | X and Blank (Indicator) | |
93 | Data Element | QKZ | X and Blank (Indicator) | |
94 | Data Element | QKZ | X and Blank (Indicator) | |
95 | Data Element | QKZ | X and Blank (Indicator) | |
96 | Data Element | QKZ | X and Blank (Indicator) | |
97 | Data Element | QKZ | X and Blank (Indicator) | |
98 | Data Element | QKZ | X and Blank (Indicator) | |
99 | Data Element | QKZ | X and Blank (Indicator) | |
100 | Data Element | QKZ | X and Blank (Indicator) | |
101 | Data Element | QKZEINDTG | Check External Numbering to Ensure Uniqueness | |
102 | Data Element | QKZEQUI | Check of External Number Against Equipment | |
103 | Data Element | QKZFIRSFEA | First Selected Characteristic Reached | |
104 | Data Element | QKZFIRSTOP | First Transaction Reached | |
105 | Data Element | QKZFISTSAM | First Selected Sample Reached | |
106 | Data Element | QKZFISTUNI | First Unit to Be Inspected Reached | |
107 | Data Element | QKZKASER | External Numbering of Units to Be Inspected is Optional | |
108 | Data Element | QKZLASTFEA | Last Selected Characteristic Reached | |
109 | Data Element | QKZLASTOP | Last Transaction Reached | |
110 | Data Element | QKZLASTSAM | Last Selected Sample Reached | |
111 | Data Element | QKZLASTUNI | Last Unit to Be Inspected Reached | |
112 | Data Element | QKZMUSER | External Numbering of Units to Be Inspected is required | |
113 | Data Element | QKZNOSER | No External Numbering of Units to Be Inspected | |
114 | Data Element | QLFNKN | Current Node Number from Order Counter APLZL | |
115 | Data Element | QLSTPROBE | Last Sample Number | |
116 | Data Element | QLTEXTCODE | Long Text Exists for the Code | |
117 | Data Element | QLTEXTCODE | Long Text Exists for the Code | |
118 | Data Element | QLTEXTCODE | Long Text Exists for the Code | |
119 | Data Element | QLTEXTCODE | Long Text Exists for the Code | |
120 | Data Element | QLTEXTCODE | Long Text Exists for the Code | |
121 | Data Element | QLTEXTKZ | Inspection Characteristic Long Text Exists | |
122 | Data Element | QMASCHINE | General Information | |
123 | Data Element | QMAXWERTC | Maximum Value of the Valid Measured Values | |
124 | Data Element | QMBEWERTG | Inspection Result Valuation | |
125 | Data Element | QMBEWERTG | Inspection Result Valuation | |
126 | Data Element | QMEDIAWRTC | Median of Valid Measured Values | |
127 | Data Element | QMERKNR | Master Inspection Characteristics | |
128 | Data Element | QMERKNRP | Inspection Characteristic Number | |
129 | Data Element | QMERKTXTKZ | Long-Text Indicator for the Characteristic Description | |
130 | Data Element | QMESSWERTC | Measured Value for a Sample Unit | |
131 | Data Element | QMESSWERTC | Measured Value for a Sample Unit | |
132 | Data Element | QMESSWERTC | Measured Value for a Sample Unit | |
133 | Data Element | QMESSWERTC | Measured Value for a Sample Unit | |
134 | Data Element | QMINWERTC | Minimum Value of the Valid Measured Values | |
135 | Data Element | QMITLSTANC | Arithmetic Mean or Standard Deviation of Measured Values | |
136 | Data Element | QMITTEWRTC | Arithmetic Mean of Valid Measured Values | |
137 | Data Element | QMITTEWRTC | Arithmetic Mean of Valid Measured Values | |
138 | Data Element | QMODE | Characteristic Filter (Processing Mode) for Inspection Chars | |
139 | Data Element | QMOMENT3C | Third Central Moment of Valid Measured Values | |
140 | Data Element | QMOMENT4C | Fourth Central Moment of Valid Measured Values | |
141 | Data Element | QOFFSETC | Offset for the Scale Conversion of Measured Values | |
142 | Data Element | QOFSETFAKT | Info on Offset, Factor and Presentation of Single Results | |
143 | Data Element | QORIGINAL_INPUT | Original Value Before Input Processing | |
144 | Data Element | QPLAUSIOBC | Upper Plausibility Limit | |
145 | Data Element | QPLAUSIUNC | Lower Plausibility Limit | |
146 | Data Element | QPLNFL_BIS | Upper Limit of the Node Sequence for the Inspection Plan | |
147 | Data Element | QPLNFL_VON | Lower Limit of the Node Sequence for the Inspection Plan | |
148 | Data Element | QPLNFOLGE | Sequence of Operations Within a Plan | |
149 | Data Element | QPLOSART | Inspection Type | |
150 | Data Element | QPLOSARTXT | Short Text for the Inspection Type | |
151 | Data Element | QPLOSLTXT | Long Text for Inspection Lot | |
152 | Data Element | QPMETHODE | Inspection Method | |
153 | Data Element | QPROBEFAK | Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.) | |
154 | Data Element | QPROBENR | Sample Number | |
155 | Data Element | QPROBME | Sample Unit of Measure | |
156 | Data Element | QPRPLATZ | Work Center | |
157 | Data Element | QPRPOS | Test Position | |
158 | Data Element | QPRUEFDATB | End Date of the Inspection | |
159 | Data Element | QPRUEFDATV | Inspection Start Date | |
160 | Data Element | QPRUEFER | Name of the Inspector | |
161 | Data Element | QPRUEFKZ | Inspection Description Exists | |
162 | Data Element | QPRUEFLINR | Single-Unit Number for the Unit to Be Inspected | |
163 | Data Element | QPRUEFZTB | End Time of the Inspection | |
164 | Data Element | QPRUEFZTV | Starting Time of the Inspection | |
165 | Data Element | QPVOLTXT | Long Text for the Inspection Operation | |
166 | Data Element | QRKANZE | Display Control Charts | |
167 | Data Element | QRUECKNR | Confirmation Number for Inspection Characteristic | |
168 | Data Element | QRUECKNRVE | Use Confirmation Number | |
169 | Data Element | QRUECKWEIS | Reject Characteristic (Partial Sample) | |
170 | Data Element | QSERIALNRVER | Use Single Unit Number | |
171 | Data Element | QSERNPINST | Record PM Serial Numbers | |
172 | Data Element | QSERRUECK | Results Confirmation Exists for Unit to Be Inspected | |
173 | Data Element | QSIAUSPRG | Characteristic Overview for Characteristic Attributes | |
174 | Data Element | QSIEINFELD | Characteristic Overview (Summarized) | |
175 | Data Element | QSIFEHLEH | Characteristic Overview for Nonconforming Units | |
176 | Data Element | QSIFEHLER | Characteristic Overview of Defect Numbers | |
177 | Data Element | QSIPRUEFL | Characteristic Overview of Unit to Be Inspected | |
178 | Data Element | QSISUMPLUS | Characteristic Overview (Summarized Plus) | |
179 | Data Element | QSIUEBERB | Characteristic Overview | |
180 | Data Element | QSIVARIAB | Characteristic Overview of Confirmation of Measured Values | |
181 | Data Element | QSOLLWERTC | Target Value for a Quantitative Characteristic | |
182 | Data Element | QSPANNWEIC | Range of Valid Measured Values | |
183 | Data Element | QSTDAWC | Standard Deviation of Valid Measured Values | |
184 | Data Element | QSTDAWC | Standard Deviation of Valid Measured Values | |
185 | Data Element | QSTICHVERF | Sampling Procedure in Inspection Characteristic | |
186 | Data Element | QSTSCHL | Key Code | |
187 | Data Element | QSTUECKNR | Counter for Inspection Unit Number | |
188 | Data Element | QSTUECKNR | Counter for Inspection Unit Number | |
189 | Data Element | QTABIXN | Current Item in the Processing Table | |
190 | Data Element | QTFILLN | Scope of the Processing Table | |
191 | Data Element | QTOLOBC | Upper Specification Limit | |
192 | Data Element | QTOLUNC | Lower Specification Limit | |
193 | Data Element | QTXT_CODE | Short Text for Code | |
194 | Data Element | QTXT_CODE | Short Text for Code | |
195 | Data Element | QTXT_CODE | Short Text for Code | |
196 | Data Element | QTXT_CODE | Short Text for Code | |
197 | Data Element | QTXT_CODE | Short Text for Code | |
198 | Data Element | QTXT_GROUP | Short Text for the Code Group/Selected Set | |
199 | Data Element | QTXT_GROUP | Short Text for the Code Group/Selected Set | |
200 | Data Element | QTXT_GROUP | Short Text for the Code Group/Selected Set | |
201 | Data Element | QTXT_GROUP | Short Text for the Code Group/Selected Set | |
202 | Data Element | QTXT_GROUP | Short Text for the Code Group/Selected Set | |
203 | Data Element | QURWBLOCK | Record Individual Results in a Table | |
204 | Data Element | QUSERTEXT | Short Description of a User Function Key | |
205 | Data Element | QUSERTEXT | Short Description of a User Function Key | |
206 | Data Element | QUSERTEXT | Short Description of a User Function Key | |
207 | Data Element | QUSERTEXT | Short Description of a User Function Key | |
208 | Data Element | QVARIANZC | Dispersion (Variance) of Valid Measured Values | |
209 | Data Element | QVARIANZC | Dispersion (Variance) of Valid Measured Values | |
210 | Data Element | QVERSNR | Version Number | |
211 | Data Element | QVERSNR | Version Number | |
212 | Data Element | QVERSNR | Version Number | |
213 | Data Element | QVERSNR | Version Number | |
214 | Data Element | QVERSNR | Version Number | |
215 | Data Element | QVERSNRMK | Version Number of the Master Inspection Characteristic | |
216 | Data Element | QVERSNRPM | Version Number of the Inspection Method | |
217 | Data Element | QVORNR | Operation Number | |
218 | Data Element | QVORNR_BIS | Upper Limit for an Inspection Operation Interval | |
219 | Data Element | QVORNR_VON | Lower Limit for an Inspection Operation Interval | |
220 | Data Element | Q_MS_FLG | Indicator: Multiple Specifications | |
221 | Data Element | WERKS_D | Plant | |
222 | Data Element | WERKS_D | Plant | |
223 | Data Element | WERKS_D | Plant |