SAP ABAP Function Module - Index E, page 27
Function Module - E
| # | Function Module | Mode | Short Description |
|---|---|---|---|
 |
|
|
|
| 1 |  ESH_BI_CONFIGURATION |
 R |
Configure BI for content generation ( exec.only once) |
| 2 | ESH_BI_SCHEDULING_JOBS |
Schedule BI jobs for deleting old logs/write appl.logs to db | |
| 3 | ESH_BP_RECOVER |
Recovery after backup (called by Python) | |
| 4 | ESH_BP_RECOVER_BACKEND |
R |
Recover ESH Backend Data after Hub Recovery |
| 5 | ESH_BP_SUSPEND |
R |
Suspend ABAP during Online-Backup |
| 6 | ESH_CALL_ADMIN_COCKPIT_UI |
Call Administration Cockpit UI | |
| 7 | ESH_CALL_SEARCH_UI |
Call Search UI | |
| 8 | ESH_CHECK_BI_USER_EXISTS |
R |
Check if BI user was created for RSA1 |
| 9 | ESH_CHECK_SYSTEM_CONNECTABLE |
Get the BW client | |
| 10 | ESH_CM_POST_SYS_COUP |
Post sys coupling table | |
| 11 | ESH_COI_GET_SNAPSHOT |
R |
Get config data for solution manager |
| 12 | ESH_CONNECT_BI_FOR_SOURCE_SYST |
Create RFC Destinations to Access the Search Data Provider | |
| 13 | ESH_CO_READ_TABLE |
Read table | |
| 14 | ESH_CP_SET_STATUS |
R |
Set status of change pointer processing (RFC Hub -> BE) |
| 15 | ESH_CREATE_BI_USER |
R |
Create a BI user for background |
| 16 | ESH_CREATE_BI_USER_FOR_LOGSYS |
R |
Create a BI user for background |
| 17 | ESH_CREATE_CONNECTOR_BI |
R |
Create a BI search connector |
| 18 | ESH_CREATE_RFC_DESTINATIONS |
Create RFC Destinations to Access the Search Data Provider | |
| 19 | ESH_CREATE_SOURCE_SYST_DIALOG |
Create in BI a source system based on defined RFC | |
| 20 | ESH_CTC_APPEND_DOMAIN_IPS |
Append internal domain and virtual IPs to exclusions | |
| 21 | ESH_CTC_CONVERT_EXCLUSIONS_A |
Convert exclusion list to ABAP format | |
| 22 | ESH_CTC_CONVERT_EXCLUSIONS_T |
Convert exclusion list to TREX format | |
| 23 | ESH_CTC_CREATE_DBMCLI_CONFFILE |
R |
Create a file containing dbmcli commands for setting params |
| 24 | ESH_CTC_SET_ABAP_PROXY |
R |
Configure ABAP Proxy settings |
| 25 | ESH_CTC_SET_SEC_LIMITS |
R |
Setup /etc/security/limits.conf |
| 26 | ESH_CTC_SET_TREX_PROXY |
R |
Configure TREX Proxy settings |
| 27 | ESH_DELETE_USER_DATA |
R |
Delete user data after indexing |
| 28 | ESH_DEL_FIRST_INIT |
Delete first init for BI DataSource | |
| 29 | ESH_DP_DATA_INTERCHANGE |
R |
Data interchange |
| 30 | ESH_DP_GET_DATA |
R |
Get data |
| 31 | ESH_DP_GET_DATA_PROVIDERS |
R |
Get data providers |
| 32 | ESH_DP_GET_INSTANCE |
R |
Get data provider instance |
| 33 | ESH_DP_GET_TIMESTAMP |
R |
Get timestamp of a data provider |
| 34 | ESH_DS_GENERATE_CONTENT |
Generate BI content for a DataSource | |
| 35 | ESH_ENG_CCMS_DELETE_NODES |
Delete Nodes Below Root Node 'Search Object Connectors' in CCMS | |
| 36 | ESH_ENG_CCMS_DELETE_SC_NODE |
Delete Search Connector Node in CCMS | |
| 37 | ESH_ENG_CCMS_SC_ANALYSIS |
Analysis Method for Search Connectors | |
| 38 | ESH_ENG_CCMS_SC_COLLECTOR |
Collector for Search Connectors | |
| 39 | ESH_ENG_CCMS_SC_COLLECTOR_INT |
R |
Collector for Search Connectors (other client) |
| 40 | ESH_EXECUTE_WDY_APPL_IN_PLACE |
R |
Execute Web Dynpro Application in Place |
| 41 | ESH_EX_CP_STATUS_DB |
DB Update Change Pointer Status | |
| 42 | ESH_EX_FU_CONN_DB |
DB Update Fast Update Connector Registration | |
| 43 | ESH_EX_FU_REGISTER_OTYPES_DB |
DB Update Fast Update Connector Registration | |
| 44 | ESH_EX_FU_SCHEDULE_EXECUTION |
X | Schedule execution |
| 45 | ESH_EX_FU_SCHEDULE_EXEC_UPDT |
Schedule execution (UPDATE Function Module) | |
| 46 | ESH_EX_RTI_CALLBACK_ON_ST_CHG |
Real-Time Indexing Callback on Status Change (Upd. Module) | |
| 47 | ESH_F4_HELP_EXIT |
ESH: Generic Function Module for F4 Search Help Exit | |
| 48 | ESH_F4_SHLP_EXIT_OTYP |
Beispiel für ein Suchhilfe-Exit eine Suchhilfe | |
| 49 | ESH_FED_EXECUTE_TASK |
X | Execute a search task |
| 50 | ESH_FILL_DS_IN_DATA_MODEL |
Fill the data model with BI DataSources and fields | |
| 51 | ESH_FU_GET_PROCESS_JOBLOG |
R |
Get ESH Fast Update Demon Logs |
| 52 | ESH_FU_GET_REGISTERED_OTYPES |
R |
Get object types registered for fast update |
| 53 | ESH_FU_GET_STATUS |
R |
Get Fast Update Status |
| 54 | ESH_FU_INI_IDX_DEL_CPOINTERS |
R |
Cleanup Old Changepointers prior to Initial Indexing |
| 55 | ESH_FU_INI_IDX_SET_CPSTATUS_T |
R |
Set Changepointer Status to 'T' after Initial Indexing |
| 56 | ESH_FU_REGISTER_OBJECT_TYPES |
R |
Fast Update: Connector Registration |
| 57 | ESH_FU_RFC_PING |
R |
RFC Ping |
| 58 | ESH_FU_SET_STATUS |
R |
Set Fast Update Process Status |
| 59 | ESH_FU_START_DEMON |
R |
Set Fast Update Process Status |
| 60 | ESH_FU_STOP_DEMON |
R |
Set Fast Update Process Status |
| 61 | ESH_GENERATE_CONTENT |
R |
Generate content for a list of DataSources |
| 62 | ESH_GET_ALL_USER_DATA_DELTA |
get users, profiles and auth. for given auth.objects | |
| 63 | ESH_GET_ALL_USER_DATA_FOR_AOBJ |
get users, profiles and auth. for given auth.objects | |
| 64 | ESH_GET_AOBJ_PROF_VAL_FOR_AOBJ |
get users, profiles and auth. for given auth.objects | |
| 65 | ESH_GET_APPL_COMPONENTS |
Get the application components from the source system | |
| 66 | ESH_GET_COCKPIT_URL |
R |
Get the URL of the ESH Cockpit |
| 67 | ESH_GET_DS_FOR_APPL |
Get the BI DataSources for selected application components | |
| 68 | ESH_GET_PROCESS_CHAIN |
Get the process chain for logical system, object, and node | |
| 69 | ESH_GET_PROCESS_CHAIN_CALL |
Get the name of the process chain to be executed | |
| 70 | ESH_GET_PROCESS_CHAIN_UPD_MODE |
Get the process chain for logical system, object, and node | |
| 71 | ESH_GET_PROF_USER_FOR_AOBJ |
get users, profiles and auth. for given auth.objects | |
| 72 | ESH_GET_TABLENAME |
Get the process chain for logical system, object, and node | |
| 73 | ESH_GET_USRBF2_UST12 |
Get users with Auth.Object, auths and values | |
| 74 | ESH_GET_USRBF2_UST12_DELTA |
Get users with Auth.Object, auths and values | |
| 75 | ESH_IEF_CHECK_DEVCLASS_4_SNOTE |
R |
Get package of the SWC |
| 76 | ESH_IEF_CHECK_SNOTE_IS_ACTIVE |
R |
Get package of the SWC |
| 77 | ESH_IEF_CHECK_SWC_IN_OLD_REQ |
R |
Get package of the SWC |
| 78 | ESH_IEF_CHECK_SWC_PACK_REQUEST |
R |
Check if SWC is registerable for SNOTE |
| 79 | ESH_IEF_DO_FULL_GENERAT_4_SWC |
R |
Get package of the SWC |
| 80 | ESH_IEF_GET_DATA_FROM_CODE |
Unpack Object Repository Data | |
| 81 | ESH_IEF_GET_DEVCLASS_FOR_SWC |
R |
Get package of the SWC |
| 82 | ESH_IEF_IMP_OM_UPDATE_CONT_BGD |
R |
Schedule Background Job for ESH Model Import |
| 83 | ESH_IF_CREATE_CONNECTOR |
R |
Create a search connector |
| 84 | ESH_IF_EXECUTE_SEARCH |
R |
Execute Search |
| 85 | ESH_IF_GET_AUTH_OBJECT_NAMES |
R |
Retrieve the names of relevant authorization objects |
| 86 | ESH_IF_GET_CONNECTORS |
R |
Get search connectors |
| 87 | ESH_IF_GET_CONN_REQUEST_TYPES |
R |
Get request types of a search connector |
| 88 | ESH_IF_GET_NAVIGATION_TARGETS |
R |
Get navigation targets |
| 89 | ESH_IF_GET_RELATED_CONNECTORS |
R |
Get related templates |
| 90 | ESH_IF_GET_RELATED_TEMPLATES |
R |
Get related templates |
| 91 | ESH_IF_GET_TEMPLATES |
R |
Get search connector templates |
| 92 | ESH_IF_GET_TEMPLATE_ATTRIBUTES |
R |
Get attributes of a search connector template |
| 93 | ESH_IF_GET_TEMPL_REQUEST_TYPES |
R |
Get request types of a search connector template |
| 94 | ESH_IF_SEARCH_REQUEST |
R |
Execute Search (RFC Search Request for ES Appliance) |
| 95 | ESH_IF_SEARCH_REQUEST_CR |
R |
Execute Search (RFC Search Request for ES Appliance) |
| 96 | ESH_IF_SET_AUTHORIZATIONS |
R |
Set authorizations of a logical system |
| 97 | ESH_IF_SET_AUTHORIZATIONS_720 |
R |
Set authorizations of a logical system |
| 98 | ESH_INT_CONNECT_BACKEND |
R |
Connect backend system to appliance |
| 99 | ESH_INT_CP_STATUS_LOCALLY_DB |
DB Update Change Pointer Status | |
| 100 | ESH_INT_DELETE_CONNECTOR |
R |
Delete connector in backend system |
| 101 | ESH_INT_DISCONNECT_BACKEND |
R |
Detach backend system from ES hub |
| 102 | ESH_INT_EXPORT_TREX_INDICES |
R |
Export content of relevant TREX indices |
| 103 | ESH_INT_GET_CONFIG_DATA |
R |
Get complete configuration data from backend system |
| 104 | ESH_INT_GET_DDIC_DOMAIN_DATA |
R |
Get DDIC domain data |
| 105 | ESH_INT_GET_DDIC_TABLE_DATA |
R |
Get DDIC table/ structure/ view data |
| 106 | ESH_INT_GET_DEPENDENT_NODES |
R |
Get IDs of dependent nodes |
| 107 | ESH_INT_GET_MODEL_DATA |
R |
Get complete model data from backend system |
| 108 | ESH_INT_GET_RUNTIME_BUFFER |
R |
Get runtime buffer |
| 109 | ESH_INT_GET_SWC_LIST |
R |
Get software component list from backend system |
| 110 | ESH_INT_GET_SWITCHES |
R |
Get active Switches |
| 111 | ESH_INT_GET_TEMPLATE_LIST |
R |
Set runtime buffer in backend system |
| 112 | ESH_INT_GET_TREX_DESTINATION |
R |
Get Trex machine destination |
| 113 | ESH_INT_HAS_CONNECTORS |
R |
Check for existing connectors |
| 114 | ESH_INT_PUSH_DATA |
R |
Data Push over System Boundary |
| 115 | ESH_INT_REGISTER_HUB |
R |
Connect backend system to appliance |
| 116 | ESH_INT_RELOCATE_SEARCH |
R |
Relocate from embedded search to ES hub |
| 117 | ESH_INT_SET_CONNECTOR_STATUS |
R |
Set connector status on updates |
| 118 | ESH_INT_SET_MODEL_DATA |
R |
Get complete model data from backend system |
| 119 | ESH_INT_SET_RUNTIME_BUFFER |
R |
Set runtime buffer |
| 120 | ESH_INT_TEST_CONNECTION |
R |
Test Connection for Data Push |
| 121 | ESH_INT_TRANSFER_TREX_INDICES |
R |
Transfer content of relevant TREX indices to ES hub |
| 122 | ESH_LIC_AUDIT |
To be called by License Auditing | |
| 123 | ESH_LIC_GET_TOTAL_MEMORY |
Get total memory for licensing | |
| 124 | ESH_LTXT_KEY_MAINT_DB_UPDATE |
Longtext key mapping DB updater | |
| 125 | ESH_LTXT_READ_LONGTEXTS |
R |
Enterprise Search Longtext Extraction for an Object |
| 126 | ESH_MU_F4_SM59_SYSID_RFCDEST |
SM59 Destinations eingeschränkt nach System Id | |
| 127 | ESH_OM_CHECK_SYSREL_CODE_GEN |
R |
Check if swc can be registered for code generation |
| 128 | ESH_OM_IMPORT_MODELS |
R |
Import models |
| 129 | ESH_OM_ODP_ADMISSION |
Save (G)TADIR | |
| 130 | ESH_OM_ODP_CHECK |
Check ODP | |
| 131 | ESH_OM_ODP_CREATION |
Check ODP creation | |
| 132 | ESH_OM_ODP_DUPLICATE_KEY |
Check ODP creation | |
| 133 | ESH_OM_ODP_LIST_GET_RFC |
R |
Get ODP List |
| 134 | ESH_OM_ODP_METADATA_GET |
Get metadata | |
| 135 | ESH_OM_ODP_METADATA_GET_RFC |
R |
Get metadata |
| 136 | ESH_OM_ODP_SYSREL_EXT_RFC |
R |
Get sysrel extensions |
| 137 | ESH_OM_ODP_SYSREL_GET |
R |
Get sysrel |
| 138 | ESH_OM_ODP_SYSREL_RELEVANCE |
Sysrel Relevance | |
| 139 | ESH_OM_ODP_SYSREL_VERSION_GET |
R |
Get sysrel version |
| 140 | ESH_OM_ODP_SYSTEMTYPE_GET |
Get systemtype | |
| 141 | ESH_OM_ODP_TADIR |
Tadir access | |
| 142 | ESH_OM_ODP_TADIR_WRITE |
Save (G)TADIR | |
| 143 | ESH_OM_ODP_TRANSPORT |
Transport ODPs | |
| 144 | ESH_OM_PERFORM_ON_X |
Set perform on commit | |
| 145 | ESH_OM_POST_AUTHC |
Post Authorization check Tables | |
| 146 | ESH_OM_POST_AUTHNW |
Post NW-Authorization Tables | |
| 147 | ESH_OM_POST_AUTHPB |
Post Path based Authorization check Tables | |
| 148 | ESH_OM_POST_CATEG |
Post Category Tables | |
| 149 | ESH_OM_POST_CATTR |
Post Common Layout Configurations | |
| 150 | ESH_OM_POST_DATATY |
Post Data Type Tables | |
| 151 | ESH_OM_POST_DPRVD |
Post Data Provider Tables | |
| 152 | ESH_OM_POST_LCONF |
Post Common Attribute Tables | |
| 153 | ESH_OM_POST_MODELS |
Post Model Tables | |
| 154 | ESH_OM_POST_OTYP |
Post Object Type Tables | |
| 155 | ESH_OM_POST_OTYP_CHANGE |
Post processing of object type change | |
| 156 | ESH_OM_POST_SWASGN |
Post Switch Assignment Tables | |
| 157 | ESH_OM_POST_UI_AREA |
Post UI Areas | |
| 158 | ESH_OM_RESOLVE_TEXT_REFERENCES |
R |
Resolve Text References |
| 159 | ESH_OM_SYSREL_SHLP_EXIT |
Search help exit for Software Components | |
| 160 | ESH_OM_TRANSPORT_EXPORT |
Before-Export-Methode des Transportobjekts ACGR | |
| 161 | ESH_OM_TRANSPORT_IMPORT |
After-Import-Methode des Transportobjekts SEST | |
| 162 | ESH_OM_TRANSPORT_IMPORT_STEP |
R |
Import step via RFC |
| 163 | ESH_PREPARE_NODE |
Prepare the specified node | |
| 164 | ESH_PREPARE_SEARCH_CONNECTORS |
R |
Activate the Specified Search Connectors |
| 165 | ESH_QL_SCHEDULE_AGGREGATION |
R |
Schedule Query Log Aggregation and Push to DB Index |
| 166 | ESH_RESET_SEARCH_CONNECTOR |
Reset the Specified Search Object Connector | |
| 167 | ESH_RSO_CTC_NWA_ADD_BI_SYS_CTR |
Create BI user in the source system | |
| 168 | ESH_RSO_CTC_NWA_ADD_BI_SYS_LOC |
R |
Create user and call back RFC in source system |
| 169 | ESH_RSO_CTC_NWA_GET_INFO_CENTR |
Get BI information about the central system | |
| 170 | ESH_RSO_CTC_PREPARE_BI_DWB |
Configuration of BI without dialog | |
| 171 | ESH_SEARCH_CELL_TABLE |
Search | |
| 172 | ESH_SEARCH_TABLE |
R |
Search using cell_table TREX API (and navigation) |
| 173 | ESH_SET_BI_PARAMETERS |
Set the necessary parameters for working with BI | |
| 174 | ESH_SET_SEARCH_REQUEST |
Set Search Request | |
| 175 | ESH_SE_POST_RD_TO_MIME |
Post runtime data to MIME repository | |
| 176 | ESH_SOURCE_SYSTEM_CONNECT |
Connect a source system to the appliance (all steps) | |
| 177 | ESH_SREP_GET_CEPC_TDNAME |
ESH: Extrakt Profit Ceenter SAPscript Standardtexte | |
| 178 | ESH_SREP_GET_CSKA_TDNAME |
ESH: Extrakt Kostenarten SAPscript Standardtexte | |
| 179 | ESH_SREP_GET_CSKS_TDNAME |
ESH: Extrakt Kostenstellen SAPscript Standardtexte | |
| 180 | ESH_TST_AUT_CALL_TESTCONSOLE |
Call the WD app of test console | |
| 181 | ESH_TST_REP_PROCESS_EXECUTE |
R |
Create process |
| 182 | ESH_VALUE_SUGGESTION_EXIT |
Value Suggestion Search Help Exit | |
| 183 | ESPHR_WRITE_DOCUMENT |
CHDO ESPHR => Gen. by RSSCD000 | |
| 184 | ESP_GET_ESPPL |
Read plant parameter for ESP procurement | |
| 185 | ESP_GET_ESPST |
Read storage location parameter for ESP procurement | |
| 186 | ESREP_WRITE_DOCUMENT |
CHDO ESREP => Gen. by RSSCD000 | |
| 187 | ESR_CHECK_DIGIT_CALCULATE |
Module 10, Recursive | |
| 188 | ESR_CHECK_DIGIT_CREATE |
Determination of Check Digits for ISR Procedure | |
| 189 | ESR_GET_REL |
AGS ESR: relationship between customer/solution/installation no/sid | |
| 190 | ESR_HLPEXIT_4_CREATEBY |
ESR ESR Value Help Exit for Customer | |
| 191 | ESR_HLPEXIT_4_CUSTOMER |
ESR ESR Value Help Exit for Customer | |
| 192 | ESR_HLPEXIT_4_INSTALLATION_ID |
ESR Value Help Exit for Installation ID | |
| 193 | ESR_HLPEXIT_4_SCH_ID |
ESR ESR Value Help Exit for Schedule ID | |
| 194 | ESR_HLPEXIT_4_SOLUTION_ID |
ESR Value Help Exit for Solution ID | |
| 195 | ESR_HLPEXIT_4_SOLUTION_ID2 |
ESR Value Help Exit for Solution ID | |
| 196 | ESR_HLPEXIT_4_SYSTEM_ID |
ESR Value Help Exit for System ID | |
| 197 | ESR_HLPEXIT_4_VARID |
ESR Variant ID Infomation Input Help | |
| 198 | ESR_HLPEXIT_4_VARID2 |
ESR Variant ID Infomation Input Help | |
| 199 | ESR_NUMBER_CHECK |
R |
Check of PBC/POR number |
| 200 | ESR_NUMBER_MAKE |
ESR Nummer erstellen | |
| 201 | ESR_NUMBER_MAKE_TPM |
ESR Nummer erstellen | |
| 202 | ESR_UPLOAD_IMG_TO_MIME |
ESR: upload generated jpg to mime repository | |
| 203 | ESSADM_WRITE_DOCUMENT |
CHDO ESSADM => Gen. by RSSCD000 | |
| 204 | ESSUB_WRITE_DOCUMENT |
CHDO ESSUB => Gen. by RSSCD000 | |
| 205 | ESS_DYNAMIC_DATA_READ |
R |
Returns required data for a service |
| 206 | ESS_DYNAMIC_INFOTYPE_READ |
R |
reads infotype data into a two column table |
| 207 | ESS_FOTO_BIRTHDAY |
R |
Benutzerspezifische Daten auf der Datenbank speichern |
| 208 | ESS_GET_LE_COLOR_TABLE |
Reads the colors and descriptions used in a life event | |
| 209 | ESS_GET_LIFE_EVENT_MENU |
R |
Get ESS live event menu |
| 210 | ESS_LE_STATUS |
R |
Set status life event menu items. |
| 211 | ESS_LE_STATUS_CHECK |
Reads status information for life events | |
| 212 | ESS_MA_NEWS_GET_PERS |
R |
|
| 213 | ESS_MA_NEWS_SET_PERS |
R |
|
| 214 | ESS_MA_STOCKS_GET_PERS |
R |
|
| 215 | ESS_MA_STOCKS_SET_PERS |
R |
|
| 216 | ESS_MA_WEBSEARCH_GET_PERS |
R |
|
| 217 | ESS_MA_WEBSEARCH_SET_PERS |
R |
|
| 218 | ESS_NEW_HIRE_CHECK |
check if the New Hire Event is active for this user | |
| 219 | ESS_NEW_HIRE_DATA_01 |
R |
reads data for the first screen of the new hire life event |
| 220 | ESS_USERGROUP_CHECK |
R |
|
| 221 | ESS_USERS_OF_ROLE_GET |
R |
|
| 222 | ESTABLISH_USERS_TO_UPD_BUFFER |
Establish the users to be invalidated in runtime buffer | |
| 223 | ESTDF_OBCT_WRITE_DOCUMENT |
CHDO ESTDF_OBCT => Gen. by RSSCD000 | |
| 224 | ESTDU_OBCT_WRITE_DOCUMENT |
CHDO ESTDU_OBCT => Gen. by RSSCD000 | |
| 225 | ESTLP_OBCT_WRITE_DOCUMENT |
CHDO ESTLP_OBCT => Gen. by RSSCD000 | |
| 226 | ESTLR_OBCT_WRITE_DOCUMENT |
CHDO ESTLR_OBCT => Gen. by RSSCD000 | |
| 227 | ESTLU_OBCT_WRITE_DOCUMENT |
CHDO ESTLU_OBCT => Gen. by RSSCD000 | |
| 228 | ESTLV_OBCT_WRITE_DOCUMENT |
CHDO ESTLV_OBCT => Gen. by RSSCD000 | |
| 229 | ESTMJ_OBCT_WRITE_DOCUMENT |
CHDO ESTMJ_OBCT => Gen. by RSSCD000 | |
| 230 | ESTOH_OBCT_WRITE_DOCUMENT |
CHDO ESTOH_OBCT => Gen. by RSSCD000 | |
| 231 | ESTPH_OBCT_WRITE_DOCUMENT |
CHDO ESTPH_OBCT => Gen. by RSSCD000 | |
| 232 | ESTPJ_OBCT_WRITE_DOCUMENT |
CHDO ESTPJ_OBCT => Gen. by RSSCD000 | |
| 233 | ESTPO_OBCT_WRITE_DOCUMENT |
CHDO ESTPO_OBCT => Gen. by RSSCD000 | |
| 234 | ESTPP_OBCT_WRITE_DOCUMENT |
CHDO ESTPP_OBCT => Gen. by RSSCD000 | |
| 235 | ESTPS_OBCT_WRITE_DOCUMENT |
CHDO ESTPS_OBCT => Gen. by RSSCD000 | |
| 236 | ESTPT_OBCT_WRITE_DOCUMENT |
CHDO ESTPT_OBCT => Gen. by RSSCD000 | |
| 237 | ESTRH_OBCT_WRITE_DOCUMENT |
CHDO ESTRH_OBCT => Gen. by RSSCD000 | |
| 238 | ESTRI_OBCT_WRITE_DOCUMENT |
CHDO ESTRI_OBCT => Gen. by RSSCD000 | |
| 239 | ESTRL_OBCT_WRITE_DOCUMENT |
CHDO ESTRL_OBCT => Gen. by RSSCD000 | |
| 240 | ESTRR_OBCT_WRITE_DOCUMENT |
CHDO ESTRR_OBCT => Gen. by RSSCD000 | |
| 241 | ESTVA_OBCT_WRITE_DOCUMENT |
CHDO ESTVA_OBCT => Gen. by RSSCD000 | |
| 242 | ESTVH_OBCT_WRITE_DOCUMENT |
CHDO ESTVH_OBCT => Gen. by RSSCD000 | |
| 243 | ESTVP_OBCT_WRITE_DOCUMENT |
CHDO ESTVP_OBCT => Gen. by RSSCD000 | |
| 244 | ES_APPEND_USER_OBJECTS |
verwendetes Objekt merken bis zum Speichern | |
| 245 | ES_APPEND_USER_SETTINGS |
verwendetes Objekt merken bis zum Speichern | |
| 246 | ES_DELETE_USER_OBJECTS |
verwendetes Objekt merken bis zum Speichern | |
| 247 | ES_DELETE_USER_SETTINGS |
Benutzerparameter löschen | |
| 248 | ES_EXECUTE_CROSS_OBJECT_SEARCH |
R |
Führt eine objektübergreifende Suche aus |
| 249 | ES_EXECUTE_OBJECT_SEARCH |
R |
Führt eine Suche über den spezifizierten Objekttyp aus |
| 250 | ES_READ_USER_OBJECTS |
zuletzt verwendete Objekte aus ESRUO lesen | |
| 251 | ES_READ_USER_SETTINGS |
zuletzt verwendete Objekte aus ESRUO lesen | |
| 252 | ES_REMOVE_SPECIAL_CHARACTER |
Remove Special Character from String | |
| 253 | ES_RETRIEVE_OBJECT |
R |
Enterprise Search Lese Objektdaten |
| 254 | ES_RETRIEVE_REPOSITORY_INFO |
R |
Gibt alle informationen zu einer ES Repository zurück |
| 255 | ES_SAVE_USER_OBJECTS |
verwendete Objekte auf Datenbank (ESRUO) schreiben | |
| 256 | ES_SAVE_USER_SETTINGS |
verwendete Objekte auf Datenbank (ESDUS) schreiben | |
| 257 | ETH_HEAT_DAY |
Heizkostenaufteilung, Heizwerttage | |
| 258 | ETH_HEIZ_TAG |
Heizkostenaufteilung, Heizwerttage | |
| 259 | ETH_SAVE_PARTS |
Heizkostenaufteilung speichern | |
| 260 | ETH_UMLAGE_GET |
Holt einen VIAK21-Satz, Aufteilung in Abrechnungsgrössen | |
| 261 | ETP_IF_ADD_TEXT |
R |
EasyTaskPlanning: Text zum Task/Subtask hinzufügen |
| 262 | ETP_IF_CHANGE_COWORKERS |
R |
EasyTaskPlanning: Taskmitarbeiter ändern/löschen/hinzufügen |
| 263 | ETP_IF_CHANGE_TASK |
R |
EasyTaskPlanning: TAsk/Subtask ändern |
| 264 | ETP_IF_CHECK_AUTHORITY |
R |
EasyTaskPlanning: Berechtigungen |
| 265 | ETP_IF_CHECK_AVAILABILITY |
R |
EasyTaskPlanning: Mitarbeiterverfügbarkeit prüfen |
| 266 | ETP_IF_CREATE_TASK |
R |
EasyTaskPlanning: Task bzw. Subtask anlegen |
| 267 | ETP_IF_CUSTOMIZING_GET |
R |
Easy Task Planning: Auslesen des Backend-Customizings |
| 268 | ETP_IF_CUSTOMIZING_SET |
R |
Easy Task Planning: neue Customizing-Einstellungen speichern |
| 269 | ETP_IF_GET_ADD_FIELDCAT |
R |
ETP: Feldkatalog der Erweiterungsfelder |
| 270 | ETP_IF_GET_TASKS_FOR_USER |
R |
EasyTaskPlanning: Tasks für bestimmten Benutzer selektieren |
| 271 | ETP_IF_GET_TASK_BY_NUMB |
R |
EasyTaskPlanning: Task über Nummer lesen |
| 272 | ETP_IF_GET_USER |
R |
EasyTaskPlanning: Userinfo ermitteln |
| 273 | ETP_IF_SEARCH_USER |
R |
EasyTaskPlanning: User-Suche (Kapselung des BAPI_EMPLOYEE_GETDATA) |
| 274 | ETP_STANDALONE_ADD_TEXT |
EasytaskPlanning: Text zu Task/Subtask hinzufügen | |
| 275 | ETP_STANDALONE_CHANGE_FIELD |
EasyTaskPlanning: Ändern eines einzelnen Taskfeldes | |
| 276 | ETP_STANDALONE_CHANGE_TASK |
EasyTaskPlanning: Task (Subtask) ändern | |
| 277 | ETP_STANDALONE_CREATE_NI |
EasyTaskPlanning: Nummernkreisintervall anlegen! | |
| 278 | ETP_STANDALONE_CREATE_TASK |
Anlegen eines Tasks/Subtasks | |
| 279 | ETP_STANDALONE_DELETE_TASK |
EasyTaskPlanning: Task löschen | |
| 280 | ETP_STANDALONE_DEL_ADDFIELDS |
ETP: Zusatzfelder löschen | |
| 281 | ETP_STANDALONE_GET_ADDFIELDS |
ETP: Zusatzfelder lesen | |
| 282 | ETP_STANDALONE_GET_SUBTASK |
EasytaskPlanning: Lesen eines Subtasks | |
| 283 | ETP_STANDALONE_GET_TASK |
EasyTaskPlanning: Task lesen | |
| 284 | ETP_STANDALONE_SAVE_ADDFIELDS |
ETP: Zusatzfelder lesen | |
| 285 | ETP_STANDALONE_SELECT_TASKS |
EasyTaskPlanning: Tasks zum Partner lesen | |
| 286 | ETP_UTILS_CHECK_AVAILABILITY |
EasyTaskPlanning: Verfügbarkeit Basismeldung/grosse Meldung prüfen | |
| 287 | ETP_UTILS_CONVERT_IN2OUT |
Konvertierung: Zusatzfelder intern -> extern | |
| 288 | ETP_UTILS_CONVERT_OUT2IN |
KOnvertierung: Zusatzfelder extern -> intern | |
| 289 | ETP_UTILS_CREATE_LOGOBJ |
Anwendungs-Logobjekt erzeugen | |
| 290 | ETP_UTILS_DEBUG |
Ruft eine Endlosschleife auf, um Backenddebugging zu ermöglichen | |
| 291 | ETP_UTILS_DELETE_LOG |
R |
Löschen aller vorhandenen Logs zum MSS |
| 292 | ETP_UTILS_GET_ETP_SETTINGS |
EasyTaskPlanning: Steuerparameter lesen | |
| 293 | ETP_UTILS_GET_LOGS |
R |
Logs zum MSS lesen |
| 294 | ETP_UTILS_SET_DEBUG_USER |
Debugging-User setzen | |
| 295 | ETP_UTILS_SET_LOGGING_USER |
R |
Logging-User setzen |
| 296 | ETP_UTILS_SPLIT_MESSAGE |
Teilt einen Meldungsstring auf | |
| 297 | ETP_UTILS_SYSTEM_DATA_GET |
R |
Systemdaten für Checktool |
| 298 | ETT_CAT_CHANGE |
ETT-CATT: Bearbeitet einen Test des ext. Test Tools | |
| 299 | ETT_CAT_CTRL_CREATE |
ETT-CATT: Erzeugt das ActiveX im Dynpro | |
| 300 | ETT_CAT_CTRL_DESTROY |
ETT-CATT: Entfernt das ActiveX vom Dynpro | |
| 301 | ETT_CAT_EXECUTE |
ETT-CATT: Führt einen Test eines ext. Test Tools aus | |
| 302 | ETT_CAT_GETDATA |
ETT-CATT: Liest die Property Testdata, Testparam | |
| 303 | ETT_CAT_GET_INFO |
ETT-CATT: Ermittelt Statusinformationen | |
| 304 | ETT_CAT_SETDATA |
ETT-CATT: Setzt die ActiveX Property TestData, TestParam | |
| 305 | ETX_DOC_GET_AWKEY |
Determine Key for Tax Document | |
| 306 | ETX_DOC_GET_AWKEY_FROM_MEMORY |
Get AWKEY of Tax Document from Global Data | |
| 307 | ETX_DOC_GET_FI_DOC_NUMBER |
Get Fi-Document number for ETXDCH-DOC_NUMBER | |
| 308 | ETX_DOC_SET_AWKEY_INTO_MEMORY |
Set AWKEY of Tax Document into Global Data | |
| 309 | ETX_DOC_SET_FI_DOC_NUMBER |
Set Fi-Document number for ETXDH-DOC_NUMBER | |
| 310 | EUP_BSP_DELETE_IV_CTX |
Delete the bsp input context. Not to be called by the BSP application. | |
| 311 | EUP_CALLABLE_OBJECT_EXECUTE |
R |
Executes a callable object. |
| 312 | EUP_CO_EXECUTE_WITH_FIELDS |
R |
Execute callable object with fields. |
| 313 | EUP_CREATE_BSP_OUTPUT_STRUCT |
Creates top level strucutre for BSP callable object output parameters. | |
| 314 | EUP_GENERATE_IFORM_WITH_FIELDS |
R |
Generate interactive form with fields. |
| 315 | EUP_GENERATE_INTERACTIVE_FORM |
R |
Generate interactive form. |
| 316 | EUP_GET_BSP_INPUT_DATA |
Gets the input data for bsp co. The data is deleted. | |
| 317 | EUP_GET_BSP_OUTPUT_DATA |
R |
Called by the J2EE to get the output data. |
| 318 | EUP_GET_PROCESS_INSTANCE |
R |
Returns a running workflow instance and all its data, so structure, status |
| 319 | EUP_START_PROCESS |
R |
Starts a given workflow. |
| 320 | EUP_START_PROCESS_WITH_FIELDS |
R |
Start process with fields. |
| 321 | EUP_STORE_BSP_INPUT_DATA |
R |
Called by the J2EE to store the input data. |
| 322 | EUP_STORE_BSP_OUTPUT_DATA |
Used to store the bsp co output data. | |
| 323 | EUP_TSP_EXPORT |
R |
EUP_TSP_EXPORT |
| 324 | EUP_TSP_GET_REQUEST_IDS |
R |
EUP_TSP_GET_REQUEST_IDS |
| 325 | EUP_TSP_IMPORT |
R |
EUP_TSP_IMPORT |
| 326 | EU_ADIR_CHANGE_GET_DEP_OBJS |
Abhängige Objekte ermitteln | |
| 327 | EU_AFTER_TADIR_CHANGED |
TADIR has been changed | |
| 328 | EU_BEFORE_TADIR_CHANGED |
TADIR will be changed | |
| 329 | EU_CHECK_RELOCATION_TRANS |
Check relocation transport request | |
| 330 | EU_TAX_NUMBER_CHECK |
R |
Check of VAT registration number (EU tax number) |
| 331 | EVALUATE_BDL_TABLES |
Evaluate BDL tables for a chosen service | |
| 332 | EVALUATE_FORM__AVE_CONDITION |
Evaluate Formula and Average Condition | |
| 333 | EVALUATE_TERM |
Aufruf von EVAL_FORMULA | |
| 334 | EVALUATE_TRANSPORT_OBJECT |
||
| 335 | EVALUATION_CALCULATE |
Kursgewinn-/-verlustermittlung | |
| 336 | EVALUATION_CALCULATE_NEW |
Kursgewinn-/-verlustermittlung | |
| 337 | EVALUATION_CHECK_POST_GT_DATE |
Prüfen auf gebuchte Daten in zusammen bewerteten Depots | |
| 338 | EVALUATION_CORRECTION_GET |
Rückgabe der für einen Zugang erzeugten Korrektursätze aller Depots | |
| 339 | EVALUATION_CORRECTION_GET_I |
Rückgabe der für einen Zugang erzeugten IST-Korrektursätze aller Depots | |
| 340 | EVALUATION_CORRECTION_GET_NEW |
Rückgabe der für einen Zugang erzeugten Korrektursätze aller Depots | |
| 341 | EVALUATION_CORRECTION_PN |
Versorgen der für Zugang erzeugten Korrektursätze aller Depots mit Priman. | |
| 342 | EVALUATION_INIT |
Initialisierung der Kursgewinn-Parameter | |
| 343 | EVALUATION_LOAD |
Laden aller zusätzlichen Bewegungen des 'relevanten Bestandes' | |
| 344 | EVALUATION_LOAD_NEW |
Laden aller zusätzlichen Bewegungen des 'relevanten Bestandes' | |
| 345 | EVALUATION_MEMO_FOR_TRANSFER |
Initialisierung der Kursgewinn-Parameter | |
| 346 | EVALUATION_PARA_DETERMINE |
Bestimmung der Parameter für Kursgewinn und Bewertung | |
| 347 | EVALUATION_PARA_DETERMINE_LOAN |
Bestimmung der Parameter für Kursgewinn und Bewertung | |
| 348 | EVALUATION_PARA_DETERMINE_RFC |
R |
liest Parameter für Kursgewinn und Bewertung via RFC |
| 349 | EVALUATION_PARA_DISPLAY |
Anzeige Bewertungsparameter | |
| 350 | EVALUATION_PREPARE |
Kursgewinn-/-verlustermittlung | |
| 351 | EVALUATION_RECALL |
Kursgewinn-/-verlustermittlung | |
| 352 | EVALUATION_SAVE |
Übergabe der Daten der Zusatzdepots an den Verbucher, ohne COMMIT | |
| 353 | EVALUATION_SAVE_NEW |
Übergabe der Daten der Zusatzdepots an den Verbucher, ohne COMMIT | |
| 354 | EVAL_AUTOMATIC_CRITERIA_S013 |
Lieferantenbeurteilung Ermittlung der Noten aus S013: Termin - Menge | |
| 355 | EVAL_AUTO_INVOICE_VERIFICATION |
Bewertungsergebnisse zu Rechnungsbelegen | |
| 356 | EVAL_AUTO_SUST_VENDOR |
Automatic Calculation of Sustainability Vendor Rating | |
| 357 | EVAL_A_FAZ |
Brutto / Netto / CVaR. Dies ist die OBERSTE STUFE (entry-point). | |
| 358 | EVAL_DEFAULT_ORGUNIT |
Stamm Org.-einheit einer Person (via Infotyp 0001) | |
| 359 | EVAL_DOWN |
Strukturauswertung von O nach unten zu Ps und Os | |
| 360 | EVAL_FAZ_COLLAT_MAX |
Hilfsfkt: Das Maximum (bzgl. ABE) aus zwei Tabellen von Sicherheiten | |
| 361 | EVAL_FAZ_GROS |
PRRW & SRA | |
| 362 | EVAL_FAZ_GROS_FLOW |
C'try/Addr, VarBelegung. Set up Flow for GROS Faz-calculation | |
| 363 | EVAL_FAZ_NET |
PRRW & SRA | |
| 364 | EVAL_FAZ_NET_FLOW |
C'try/Addr, VarBelegung. Set up Flow for NET Faz-calculation | |
| 365 | EVAL_FAZ_SET_ADDR_EDF |
Hilfsfkt: Schaufelt das Adress-EDF ins Feld für's Berechnen. | |
| 366 | EVAL_FAZ_VAR |
PRRW & SRA | |
| 367 | EVAL_FAZ_VAR_FLOW |
C'try/Addr, VarBelegung. CVaR Faz-calculation is set up | |
| 368 | EVAL_FORMULA |
Analysis of a syntactically correct formula | |
| 369 | EVAL_INITIAL |
führe initial Auswertung durch | |
| 370 | EVAL_IV_ERROR_LOG |
Fehlermeldungen auf Positions- und Kopfebene | |
| 371 | EVAL_IV_KEYFIGURE_DETERMINE |
Bestimmung/Ermittlung der Kennzahlen | |
| 372 | EVAL_IV_KEYFIGURE_EVALUATE |
Bewertung der Kennzahlen | |
| 373 | EVAL_IV_POSTING_ERR |
speichert Errormeldungen | |
| 374 | EVAL_IV_POSTING_PERS |
Verbuchung der persistent zu haltenden Kennzahlen | |
| 375 | EVAL_IV_POSTING_RESULT |
Verbuchung der Bewertungsergebnisse | |
| 376 | EVAL_PRICEHISTORY_CRITERIA |
Lieferantenbeurteilung - Ermittlung der Note für die Preisentwicklung | |
| 377 | EVAL_PRICELEVEL_CRITERIA |
Lieferantenbeurteilung - Ermittlung der Note für das Preisniveau | |
| 378 | EVAL_PROTOCOLS |
Berechnungsprotokolle der automatischen und halbautomatischen Beurt.Krit. | |
| 379 | EVAL_READ_CRITERIA |
Lesen der Haupt- bzw. Teilkriterien in der Lieferantenbeurteilung | |
| 380 | EVAL_ROOT |
Abblidung einer objid zum Wurzelknoten | |
| 381 | EVAL_SEMIAUTOMATIC_CRITERIA |
Lieferantenbeurteilung Ermittlung der Noten zu halbautomatischen Kriterien | |
| 382 | EVAL_UP |
Strukturauswertung von O nach oben (Vorfahre und Geschwister) | |
| 383 | EVAT_UK_BPM_INITIATE |
R |
Function Module to send the request from R/3 to XI(HMRC) |
| 384 | EVAT_UK_DELETE |
R |
RFC to Delete Transaction from HMRC(UK_EVAT) |
| 385 | EVAT_UK_PASSWORD_HASH |
This Function Module Creates Hashing of password | |
| 386 | EVAT_UK_POLL |
R |
Polling RFC for UK(EVAT) |
| 387 | EVENT_CREATE_IN_UPDATE_TASK |
Löst ein Ereignis aus; kann in die Verbuchung aufgerufen werden. | |
| 388 | EVENT_F4_EXIT |
Suchhilfe zum Ereignis | |
| 389 | EVENT_HANDLER_CLS_EDITOR_EXIT |
ABAP Sample - Create Event Handler Class | |
| 390 | EVENT_HANDLER_MTH_EDITOR_EXIT |
ABAP Sample - Create Event Handler Method | |
| 391 | EVENT_PROCESSING |
Call up form routines for a module pool | |
| 392 | EVENT_PROC_ERR |
||
| 393 | EVENT_PROC_WARN |
Dialog box for confirming processing step: With diagnosis text | |
| 394 | EVE_ADD_LANGUAGE_TO_URL |
R |
URL für Project Management-Aufruf |
| 395 | EVE_ALERT_CAT_SHLP_EXIT |
Suchhilfe-Exit 'Alle Alert-Kategorien' | |
| 396 | EVE_ARCHIVE_GET_TABLE |
Daten einer Tabelle aus Archiv lesen | |
| 397 | EVE_ARCHIVE_OBJECT |
Archivierungsklasse CGPL - Projekt archivieren | |
| 398 | EVE_DASHBOARD_UPDATE |
Verbuchung Dashboard daten | |
| 399 | EVE_EXTRACT_PERSISTENCY_LOAD |
Verbuchung Extrakte | |
| 400 | EVE_EXTRACT_PERSISTENCY_UPDATE |
Verbuchung Extrakte | |
| 401 | EVE_EXTRACT_PERS_GET_KEYS |
Ermittelte DB Keys zu Objekt und Kontexttyp | |
| 402 | EVE_EXTRACT_PERS_GET_OBJECTS |
Ermittelt alle Objekte, die Daten besitzen | |
| 403 | EVE_GET_ALRT_CATEGORIES |
Ermittelt Alert-Kategorien, die auf dem Alert-Server definiert sind | |
| 404 | EVE_READ_OBJECT |
Daten aus Archiv lesen | |
| 405 | EVE_SET_API_CONTAINER |
Container für Alert-API füllen | |
| 406 | EVE_THRESHOLD_VL_UPDATE |
Verbuchung Schwellenwertverletzungen | |
| 407 | EVNT_LOG_WRITE_ARC |
R |
CDB Archive MMW reload servive |
| 408 | EVNT_LOG_WRITE_I01 |
R |
EVNT_LOG_WRITE: Message Inbound Adapter / Version I |
| 409 | EVNT_STG_WRITE_ARC |
R |
CDB Archive MMW reload servive |
| 410 | EVNT_STG_WRITE_I01 |
R |
EVNT_STG_WRITE: Message Inbound Adapter / Version I |
| 411 | EV_ACTIVITY_CHANGED |
Gibt Auskunft ob sich die Aktivität seit PBO geändert hat | |
| 412 | EWAEL_WDPLANT_HW_GETAPP |
liefert akt. Applikation | |
| 413 | EWA_CALL_ACTION |
EXTERN: Aufruf einer Aktion | |
| 414 | EWA_CALL_ACTION_DYNP |
EXTERN: Aufruf einer Aktion | |
| 415 | EWA_DB_DELETE_ALL |
INTERN: Löschen einer kompletten Action-Manager-Konfiguration | |
| 416 | EWA_DB_INSERT_ALL |
INTERN: Update einer kompletten Action-Manager-Konfiguration | |
| 417 | EWA_DB_SELECT_ALL |
INTERN: Selektieren einer kompletten Action-Manager-Definition | |
| 418 | EWA_DB_SELECT_HEAD |
INTERN: Selektieren Kopfeinträge einer Action-Manager-Definition | |
| 419 | EWA_DEFINE_AGR_DYNP |
EXTERN: Ordnet FNAME/KEY1 einer Aktionsgruppe zu | |
| 420 | EWA_END_OF_LIST |
EXTERN: Ende des Aufbaus (Hide) einer Liste | |
| 421 | EWA_F4_EHSBPCAT |
Personen zum Arbeitsplatz. | |
| 422 | EWA_HIDE |
EXTERN: Hide der notwendigen Daten | |
| 423 | EWA_HIDE_DYNP |
EXTERN: Hide der notwendigen Daten (im Dynpro-Fall) | |
| 424 | EWA_INITIALIZE |
EXTERN: Initialisierung des AM für eine Liste | |
| 425 | EWA_S_AMDEF_MAINTAIN |
INTERN: Bearbeiten einer Aktion-Manager-Definition | |
| 426 | EWB_BDC_INTERFACEGET |
Class SAP0002: Implementation of method InterfaceGet | |
| 427 | EWB_CCPROCCM_INTERFACEGET |
implementation of method InterfaceGet of class SAP0004 | |
| 428 | EWB_CCPROCCT_EXP_CONT_CONVERT |
Typgerechtes Aufbereiten des Export-Containers | |
| 429 | EWB_CCPROCCT_INTERFACEGET |
Implementierung der Methode InterfaceGet der Klasse CCPROCCT | |
| 430 | EWB_CCPROCFO_EXISTENCECHECK |
Implementierung der Methode CCPROCFO.ExistenceCheck | |
| 431 | EWB_CCPROCFO_GET_DETAIL |
R |
Liefert Details zu einem FO-Prozess |
| 432 | EWB_CCPROCFO_GET_LIST |
R |
Liefert eine Liste der FO-Prozesse |
| 433 | EWB_CCPROCFO_INIT |
Implementierung der priv. Methode CCPROCFO.Init | |
| 434 | EWB_CCPROCFO_INTERFACEGET |
Implementierung der Methode InterfaceGet der Klasse CCPROCFO | |
| 435 | EWB_CCPROCFO_JUMP |
Implementierung der Methode CCPROCFO.Jump | |
| 436 | EWB_CCPROCFO_PROCEXEC |
Implementierung der priv. Methode CCPROCFO.ProcExec | |
| 437 | EWB_CCPROCFO_REMOTE_PING |
R |
Ping für Remote FO Prozess Unterstützung |
| 438 | EWB_CCPROCFO_SET_STATUS |
setzt den Status eines FO-Prozesses | |
| 439 | EWB_CCPROCFO_STEPEXEC |
Implementierung der priv. Methode CCPROCFO.StepExec | |
| 440 | EWB_CCPROCFO_STEPPROTDISPLAY |
Implementierung der Methode StepProtDisplay der Klasse CCPROCFO | |
| 441 | EWB_CCPROCHT_INTERFACEGET |
implementation of method InterfaceGet of class SAP0003 | |
| 442 | EWB_CCPROCMT_INTERFACEGET |
Implementierung der Methode InterfaceGet der Klasse CCPROCMT | |
| 443 | EWB_CCPROCWF_COLLECT |
Implementierung der Methode CCPROC.Collect | |
| 444 | EWB_CCPROCWF_CREATE |
Implementierung der Objektmethode CCPROCWF.Create | |
| 445 | EWB_CCPROCWF_DELETE |
Implementierung der Objektmethode CCPROCWF.Delete | |
| 446 | EWB_CCPROCWF_EXISTENCECHECK |
Implementierung der Methode ExistenceCheck der Klasse CCPROCWF | |
| 447 | EWB_CCPROCWF_INTERFACEGET |
Implementierung der Methode InterfaceGet der Klasse CCPROCWF | |
| 448 | EWB_CCPROCWF_OBJECTADD |
Implementierung der Objektmethode CCPROCWF.ObjectAdd | |
| 449 | EWB_CCPROCWF_STATUS |
Implementierung des Objektattribute CCPROCWF.Status | |
| 450 | EWB_CCPROCWF_STEPPROTDISP |
Implementierung der Objektmethode CCPROCWF.StepProtDisp | |
| 451 | EWB_CCPROCWF_STEPPROTGET |
Implementierung der Objektmethode CCPROCWF.StepProtGet | |
| 452 | EWB_CCPROCWF_WIEXEC |
Implementierung der Objektmethode CCPROCWF.WiExec | |
| 453 | EWB_CCPROCWF_WIGET |
Implementierung der Objektmethode CCPROCWF.WiGet | |
| 454 | EWB_CCPROCWF_WORKLISTGET |
Implementierung der Objektmethode CCPROCWF.WorkListGet | |
| 455 | EWB_CCPSDUMMY_EXEC |
Implementation der Methode Exec der Klasse CCPSDUMMY | |
| 456 | EWB_CHECK_BAPI_RETURN |
Prüft Container auf BAPI Return-Parameter | |
| 457 | EWB_CHECK_DYNPRO |
Determines if screen has to be generated | |
| 458 | EWB_EDITSTP_MAINTAIN |
Front Office Editor-Schritt: Pflegen | |
| 459 | EWB_EXECUTE_RELATED_WORKITEMS |
Startet die Workitems eines Flowitems für Benutzer mit Status 'READY' | |
| 460 | EWB_FILL_ACTIVITY_NAME |
intern: Füllt Text für Aktivität eine FO Prozeß-Schrittes (StepProtFill) | |
| 461 | EWB_FLUSH_BDC_INTERFACE_CACHE |
Deletes internal data flow information table | |
| 462 | EWB_FOPROC_CLOSE |
Front Office-Prozess: Schließen | |
| 463 | EWB_FOPROC_COPY |
Front Office-Prozess: Schreiben auf DB | |
| 464 | EWB_FOPROC_DELETE |
Front Office-Prozess: Löschen (deep) | |
| 465 | EWB_FOPROC_DEQUEUE |
Front Office-Prozess: Dequeue | |
| 466 | EWB_FOPROC_ENQUEUE |
Front Office-Prozess: Enqueue | |
| 467 | EWB_FOPROC_MAINTAIN |
Front Office Prozess-Konfig.: Pflegen | |
| 468 | EWB_FOPROC_OPEN |
Front Office-Prozess: Öffnen | |
| 469 | EWB_FOPROC_STEP_ENTRY |
PUBLIC: Front Office Prozess Schrittkontrolle Einstieg | |
| 470 | EWB_FOPROC_STEP_LEAVE |
PUBLIC: Front Office Prozess Schrittkontrolle Ende | |
| 471 | EWB_FOPROC_STEP_PAI |
PUBLIC: Front Office Prozess Schrittkontrolle PAI | |
| 472 | EWB_FOPROC_WRITE |
Front Office-Prozess: Schreiben auf DB | |
| 473 | EWB_FOP_INTERFACE_GET |
R |
INTERN: Geschäftsprozeß Schnittstelle lesen |
| 474 | EWB_GETACTIVITY |
Get activity text of CCProc-Object | |
| 475 | EWB_GETACTNAME4UNINIT |
liefert Aktivittätsname für unitialisierte Prozessobjekte | |
| 476 | EWB_GETACTNAME4UNINITITIALIZED |
liefert Aktivittätsname für unitialisierte Prozessobjekte | |
| 477 | EWB_GET_ACTIVITY |
liefert Text Aktivität für einen CCProc-Objekt | |
| 478 | EWB_GET_STATUS_ICON |
liefert Icon für einen FO-Status | |
| 479 | EWB_INTERFACE_GET |
Liefert für eine Prozess-Klassen-ID die Parameter | |
| 480 | EWB_MASS_CALL_OPR |
Aufruf der Massenpflege aus der Workbench für Vorgänge | |
| 481 | EWB_MASS_SAVE_OPR |
Einbuchung von Massenänderungsdaten | |
| 482 | EWB_MASS_SELECT_OPR |
Vorgänge aus interner Tabelle zurückgeben | |
| 483 | EWB_POPUP_MESSAGE |
Ausgabe einer Anchricht | |
| 484 | EWB_PROCLID_CNVT_FROM |
konvertiert eine generische ProcClId in eine Inst. d. Struktur EWBPROCL | |
| 485 | EWB_PROCLID_CNVT_FROM_BDC |
Coverts a generic ProcClId into an instance of structure EWBPROCL | |
| 486 | EWB_PROCLID_CNVT_FROM_CM |
converts a generic ProcClId into an instance of EWBPROCL | |
| 487 | EWB_PROCLID_CNVT_FROM_CT |
konvertiert eine generische ProcClId in eine Inst. d. Struktur EWBPROCL | |
| 488 | EWB_PROCLID_CNVT_FROM_ED |
Coverts a generic ProcClId into an instance of structure EWBPROCL | |
| 489 | EWB_PROCLID_CNVT_FROM_FO |
konvertiert eine generische ProcClId in eine Inst. d. Struktur EWBPROCL | |
| 490 | EWB_PROCLID_CNVT_FROM_FO_REMOT |
konvertiert eine generische ProcClId in eine Inst. d. Struktur EWBPROCL | |
| 491 | EWB_PROCLID_CNVT_FROM_HT |
converts a generic ProcClId into an instance of EWBPROCL | |
| 492 | EWB_PROCLID_CNVT_FROM_MT |
konvertiert eine generische ProcClId in eine Inst. d. Struktur EWBPROCL | |
| 493 | EWB_PROCLID_CNVT_FROM_WF |
konvertiert eine generische ProcClId in eine Inst. d. Struktur EWBPROCL | |
| 494 | EWB_PROCLID_CNVT_TO |
konvertiert eine Inst. d. Struktur EWBPROCL in eine generische ProcClId | |
| 495 | EWB_PROCLID_CNVT_TO_BDC |
Converts an instance of structure EWBPROCL into a generic ProcClId | |
| 496 | EWB_PROCLID_CNVT_TO_CM |
converts an instance of EWBPROCL into a generic ProcClId | |
| 497 | EWB_PROCLID_CNVT_TO_CT |
konvertiert eine Inst. d. Struktur EWBPROCL in eine generische ProcClId | |
| 498 | EWB_PROCLID_CNVT_TO_ED |
Converts an instance of structure EWBPROCL into a generic ProcClId | |
| 499 | EWB_PROCLID_CNVT_TO_FO |
konvertiert eine Inst. d. Struktur EWBPROCL in eine generische ProcClId | |
| 500 | EWB_PROCLID_CNVT_TO_FO_REMOTE |
konvertiert eine Inst. d. Struktur EWBPROCL in eine generische ProcClId |
