Data Element list used by SAP ABAP Table OPS_RQPMKV10_OBJECT_TAB_PDF (Structure for the PDF form ( QM_INSP_CHAR))
SAP ABAP Table 
OPS_RQPMKV10_OBJECT_TAB_PDF (Structure for the PDF form ( QM_INSP_CHAR)) is using
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Data Element |
ATINN | Internal characteristic | |
| 2 | Data Element |
DATUV | Valid-From Date | |
| 3 | Data Element |
DDTEXT | Explanatory short text | |
| 4 | Data Element |
MANDT | Client | |
| 5 | Data Element |
MSEH6 | External Unit of Measurement in Technical Format (6-Char.) | |
| 6 | Data Element |
QAENDERER | Name of User who Most Recently Changed the Data Record | |
| 7 | Data Element |
QASDR_SDR_ACTIVE | Active Indicator for Specification Determination Rule | |
| 8 | Data Element |
QASDR_SDR_PARAMETER | Parameters for Specification Determination | |
| 9 | Data Element |
QASDR_SDR_PARAMETER | Parameters for Specification Determination | |
| 10 | Data Element |
QASDR_SPEC_DET_RULE | Specification Determination Rule | |
| 11 | Data Element |
QCGRAUSW1 | First Assigned Code Group or Selected Set | |
| 12 | Data Element |
QCGRAUSW2 | Second Assigned Code Group or Selected Set | |
| 13 | Data Element |
QCGRAUSW3 | Third Assigned Code Group or Selected Set | |
| 14 | Data Element |
QCGRAUSW4 | Fourth Assigned Code Group or Selected Set | |
| 15 | Data Element |
QCGRAUSW5 | Fifth Assigned Code Group or Selected Set | |
| 16 | Data Element |
QCHARACT_ID1 | Characteristic Description for Quality Data Exchange | |
| 17 | Data Element |
QCODEGRPO | Defect Code Group for Rejection at Upper Tolerance | |
| 18 | Data Element |
QCODEGRPQL | Defect Code Group for General Rejection | |
| 19 | Data Element |
QCODEGRPU | Defect Code Group for Rejection at Lower Tolerance | |
| 20 | Data Element |
QCODEO | Defect Code for Rejection at Upper Specification Limit | |
| 21 | Data Element |
QCODEQL | Defect Code for Rejection: General | |
| 22 | Data Element |
QCODEU | Defect Code for Rejection at Lower Specification Limit | |
| 23 | Data Element |
QDATUMAEND | Date on Which Data Record Was Changed | |
| 24 | Data Element |
QDATUMERST | Date on Which the Data Record Was Created | |
| 25 | Data Element |
QEANTVERF | Fraction Calculation | |
| 26 | Data Element |
QERSTELLER | Name of User Who Created the Data Record | |
| 27 | Data Element |
QGELOESCHT | Data Record Was Deleted | |
| 28 | Data Element |
QGRENZO1C | First Upper Specification Limit | |
| 29 | Data Element |
QGRENZO2C | Second Upper Specification Limit | |
| 30 | Data Element |
QGRENZOB1 | First Upper Specification Limit | |
| 31 | Data Element |
QGRENZOB2 | Second Upper Specification Limit | |
| 32 | Data Element |
QGRENZU1C | First Lower Specification Limit | |
| 33 | Data Element |
QGRENZU2C | Second Lower Specification Limit | |
| 34 | Data Element |
QGRENZUN1 | First Lower Specification Limit | |
| 35 | Data Element |
QGRENZUN2 | Second Lower Specification Limit | |
| 36 | Data Element |
QINPPROC | Parameters for Input Processing in QM Results Recording | |
| 37 | Data Element |
QKATAUSW1 | Catalog Type 1 for the Characteristic Attributes | |
| 38 | Data Element |
QKATAUSW2 | Catalog Type of the Second Assigned Catalog Entry | |
| 39 | Data Element |
QKATAUSW3 | Catalog Type of the Third Assigned Catalog Entry | |
| 40 | Data Element |
QKATAUSW4 | Catalog Type of the Fourth Assigned Catalog Entry | |
| 41 | Data Element |
QKATAUSW5 | Catalog Type of the Fifth Assigned Catalog Entry | |
| 42 | Data Element |
QKLASSBR | Class Width | |
| 43 | Data Element |
QKLASSMIT | Class Midpoint | |
| 44 | Data Element |
QKLASSZAHL | Number of Value Classes for Inspection Results | |
| 45 | Data Element |
QKTTAB1 | Catalog Entry 1 Is a Selected Set | |
| 46 | Data Element |
QKTTAB2 | Catalog Entry 2 Is a Selected Set | |
| 47 | Data Element |
QKTTAB3 | Catalog Entry 3 Is a Selected Set | |
| 48 | Data Element |
QKTTAB4 | Catalog Entry 4 Is a Selected Set | |
| 49 | Data Element |
QKTTAB5 | Catalog Entry 5 Is a Selected Set | |
| 50 | Data Element |
QKURZTEXT | Short Text | |
| 51 | Data Element |
QKURZTEXT | Short Text | |
| 52 | Data Element |
QKURZTEXT | Short Text | |
| 53 | Data Element |
QKURZTEXT | Short Text | |
| 54 | Data Element |
QKZPKAT | Reference to Characteristic Attribute Required | |
| 55 | Data Element |
QKZQUNMK | Quantitative Characteristic | |
| 56 | Data Element |
QKZQUNMK | Quantitative Characteristic | |
| 57 | Data Element |
QKZTOLOB | Upper Specification Limit | |
| 58 | Data Element |
QKZTOLUN | Lower Specification Limit | |
| 59 | Data Element |
QLOESCHKZ | Status of Master Record | |
| 60 | Data Element |
QLTEXTEKZ | Long Text for Physical-Sample Drawing of a Characteristic | |
| 61 | Data Element |
QLTEXTMK | Long Text Exists for the Characteristic | |
| 62 | Data Element |
QMASSEH | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 63 | Data Element |
QMASTAUTH | Authorization Group QM Basic Data | |
| 64 | Data Element |
QMERKGEW | Weighting of the Characteristic | |
| 65 | Data Element |
QMERKNR | Master Inspection Characteristics | |
| 66 | Data Element |
QMKCONTROL | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
| 67 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 68 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 69 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 70 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 71 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 72 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 73 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 74 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 75 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 76 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 77 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 78 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 79 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 80 | Data Element |
QPLAUSIOB | Upper Plausibility Limit | |
| 81 | Data Element |
QPLAUSIOBC | Upper Plausibility Limit | |
| 82 | Data Element |
QPLAUSIUN | Lower Plausibility Limit | |
| 83 | Data Element |
QPLAUSIUNC | Lower Plausibility Limit | |
| 84 | Data Element |
QPMETHODE | Inspection Method | |
| 85 | Data Element |
QPOSNR | Position of a method for a char. within a list of methods | |
| 86 | Data Element |
QPRQUALIF | Inspector Qualification | |
| 87 | Data Element |
QRZWAN1 | Optional Characteristic | |
| 88 | Data Element |
QRZWAN2 | Conditional Characteristic After Acceptance | |
| 89 | Data Element |
QRZWAN3 | Conditional Characteristic After Rejection | |
| 90 | Data Element |
QRZWAN4 | Required Characteristic | |
| 91 | Data Element |
QSOLLWERTC | Target Value for a Quantitative Characteristic | |
| 92 | Data Element |
QSOLLWERTE | Target Value for a Quantitative Characteristic | |
| 93 | Data Element |
QSORTFELD | Search Field | |
| 94 | Data Element |
QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 95 | Data Element |
QTOLERANZ | Tolerance Key | |
| 96 | Data Element |
QTOLOB | Upper Specification Limit | |
| 97 | Data Element |
QTOLOBC | Upper Specification Limit | |
| 98 | Data Element |
QTOLUN | Lower Tolerance Limit | |
| 99 | Data Element |
QTOLUNC | Lower Specification Limit | |
| 100 | Data Element |
QTOLWAB | Date from Which the Tolerance Change Is Valid | |
| 101 | Data Element |
QTOLWBIS | Date Until Which the Tolerance Change Is Valid | |
| 102 | Data Element |
QTOLWOB | Change to Upper Specification Limit | |
| 103 | Data Element |
QTOLWOBC | Change to Upper Specification Limit | |
| 104 | Data Element |
QTOLWUN | Change to Lower Specification Limit | |
| 105 | Data Element |
QTOLWUNC | Change to Lower Specification Limit | |
| 106 | Data Element |
QTXT10 | Text Line for Additional Information | |
| 107 | Data Element |
QTXT20 | Text Line for Additional Information | |
| 108 | Data Element |
QTXT40 | Text Line for Additional Information | |
| 109 | Data Element |
QVERSNR | Version Number | |
| 110 | Data Element |
QVERSNR | Version Number | |
| 111 | Data Element |
QVERSNR | Version Number | |
| 112 | Data Element |
QVERSNR1 | Version Number of the First Assigned Entry | |
| 113 | Data Element |
QVERSNR2 | Version Number of the Second Assigned Entry | |
| 114 | Data Element |
QVERSNR3 | Version Number of the Third Assigned Entry | |
| 115 | Data Element |
QVERSNR4 | Version Number of the Fourth Assigned Entry | |
| 116 | Data Element |
QVERSNR5 | Version Number of the Fifth Assigned Entry | |
| 117 | Data Element |
QVERSNRMK | Version Number of the Master Inspection Characteristic | |
| 118 | Data Element |
QVERW | Data Record is Being Used | |
| 119 | Data Element |
QVOLLST | Copy Model/Reference Characteristic | |
| 120 | Data Element |
QWERKAUSW1 | Plant of the First Assigned Selected Set | |
| 121 | Data Element |
QWERKAUSW2 | Plant of the Second Assigned Selected Set | |
| 122 | Data Element |
QWERKAUSW3 | Plant of the Third Assigned Selected Set | |
| 123 | Data Element |
QWERKAUSW4 | Plant of the Fourth Assigned Selected Set | |
| 124 | Data Element |
QWERKAUSW5 | Plant of the Fifth Assigned Selected Set | |
| 125 | Data Element |
QWERKPMT | Plant of the Inspection Method | |
| 126 | Data Element |
QZAEHLER | Plant for the Master Inspection Characteristic | |
| 127 | Data Element |
SPRAS | Language Key | |
| 128 | Data Element |
WERKS_D | Plant |
