Data Element list used by SAP ABAP Table RIHPLMK (PM: Display structure inspectn charact. in TL for reporting)
SAP ABAP Table 
RIHPLMK (PM: Display structure inspectn charact. in TL for reporting) is using
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Data Element |
AENNR | Change Number | |
| 2 | Data Element |
ANDAT | Date Record Created on | |
| 3 | Data Element |
ANNAM | User Who Created Record | |
| 4 | Data Element |
DATUV | Valid-From Date | |
| 5 | Data Element |
LKENZ | Deletion Indicator | |
| 6 | Data Element |
PLNAL | Group Counter | |
| 7 | Data Element |
PLNNR | Key for Task List Group | |
| 8 | Data Element |
PLNTY | Task List Type | |
| 9 | Data Element |
QADDPRO | Sample Quantity Is Added | |
| 10 | Data Element |
QAENDERER | Name of User who Most Recently Changed the Data Record | |
| 11 | Data Element |
QAUSSLOS | Characteristic Relevant for Qual. Score and Scrap Share | |
| 12 | Data Element |
QBFHLZHL | Recording the Number of Defects | |
| 13 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 14 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 15 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 16 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 17 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 18 | Data Element |
QCODEGRPQL | Defect Code Group for General Rejection | |
| 19 | Data Element |
QCODEGRPU | Defect Code Group for Rejection at Lower Tolerance | |
| 20 | Data Element |
QCODEO | Defect Code for Rejection at Upper Specification Limit | |
| 21 | Data Element |
QCODEQL | Defect Code for Rejection: General | |
| 22 | Data Element |
QCODEU | Defect Code for Rejection at Lower Specification Limit | |
| 23 | Data Element |
QDATUMAEND | Date on Which Data Record Was Changed | |
| 24 | Data Element |
QDOKUKZ | Documentation Required for Inspection Results | |
| 25 | Data Element |
QDRUCK1 | ||
| 26 | Data Element |
QEANTVERF | Fraction Calculation | |
| 27 | Data Element |
QESTUKZ | Recording Type | |
| 28 | Data Element |
QFEHLREC | Defects Recording Automatically Called Up | |
| 29 | Data Element |
QFORMEL | Formula Field | |
| 30 | Data Element |
QFORMEL | Formula Field | |
| 31 | Data Element |
QFORMELSL | Check and Calculate Formula in QM | |
| 32 | Data Element |
QGRENZOB1 | First Upper Specification Limit | |
| 33 | Data Element |
QGRENZOB2 | Second Upper Specification Limit | |
| 34 | Data Element |
QGRENZUN1 | First Lower Specification Limit | |
| 35 | Data Element |
QGRENZUN2 | Second Lower Specification Limit | |
| 36 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 37 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 38 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 39 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 40 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 41 | Data Element |
QKLASSBR | Class Width | |
| 42 | Data Element |
QKLASSMIT | Class Midpoint | |
| 43 | Data Element |
QKLASSZAHL | Number of Value Classes for Inspection Results | |
| 44 | Data Element |
QKTTAB | Catalog Entry Is a Selected Set | |
| 45 | Data Element |
QKTTAB | Catalog Entry Is a Selected Set | |
| 46 | Data Element |
QKTTAB | Catalog Entry Is a Selected Set | |
| 47 | Data Element |
QKTTAB | Catalog Entry Is a Selected Set | |
| 48 | Data Element |
QKTTAB | Catalog Entry Is a Selected Set | |
| 49 | Data Element |
QKURZTEXT | Short Text | |
| 50 | Data Element |
QKZAENBEL | Create Change Documents During Results Recording | |
| 51 | Data Element |
QKZDESTROY | Destructive Inspection | |
| 52 | Data Element |
QKZEINSTMK | Characteristic Type | |
| 53 | Data Element |
QKZFORMEL | Calculated Characteristic | |
| 54 | Data Element |
QKZPKAT | Reference to Characteristic Attribute Required | |
| 55 | Data Element |
QKZPROCCHAR | Process Characteristic | |
| 56 | Data Element |
QKZPRZIEH | Physical-Sample-Drawing Text Exists | |
| 57 | Data Element |
QKZQUMK | Measured Values Must Be Recorded | |
| 58 | Data Element |
QKZQUNMK | Quantitative Characteristic | |
| 59 | Data Element |
QKZSOLLPR | Check Target Value | |
| 60 | Data Element |
QKZTOLOB | Upper Specification Limit | |
| 61 | Data Element |
QKZTOLUN | Lower Specification Limit | |
| 62 | Data Element |
QKZ_REF | Reference to Master Insp. Characteristic in Task List | |
| 63 | Data Element |
QLEITSTKZ | Control Characteristics Results - QM Subsystem | |
| 64 | Data Element |
QLTEXTKZ | Inspection Characteristic Long Text Exists | |
| 65 | Data Element |
QLZEITKZ | Long-Term Inspection | |
| 66 | Data Element |
QMASSEH | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 67 | Data Element |
QMERKGEW | Weighting of the Characteristic | |
| 68 | Data Element |
QMERKNR | Master Inspection Characteristics | |
| 69 | Data Element |
QMERKNRP | Inspection Characteristic Number | |
| 70 | Data Element |
QNAENDKZ | Default Control Indicators Cannot Be Changed | |
| 71 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 72 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 73 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 74 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 75 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 76 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 77 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 78 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 79 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 80 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 81 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 82 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 83 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 84 | Data Element |
QPARA | Control Indicator "Parameter Characteristic" Set/Not Set | |
| 85 | Data Element |
QPLAUSIOB | Upper Plausibility Limit | |
| 86 | Data Element |
QPLAUSIUN | Lower Plausibility Limit | |
| 87 | Data Element |
QPMETHODE | Inspection Method | |
| 88 | Data Element |
QPMZWANG | Assignment of Test Equipment Required | |
| 89 | Data Element |
QPROBEPL | Partial Sample No. for Inspection Charac. in Task List | |
| 90 | Data Element |
QPRQUALIF | Inspector Qualification | |
| 91 | Data Element |
QPUMFKZ | Inspection Scope | |
| 92 | Data Element |
QPZLFH | Assigned Test Equipment | |
| 93 | Data Element |
QRZWANG | Characteristic Category | |
| 94 | Data Element |
QSOLLWERTE | Target Value for a Quantitative Characteristic | |
| 95 | Data Element |
QSPCKRIT | SPC Criterion | |
| 96 | Data Element |
QSPCMK | SPC Characteristic | |
| 97 | Data Element |
QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 98 | Data Element |
QSTICHPR | Sampling Procedure is Required | |
| 99 | Data Element |
QSTICHVERF | Sampling Procedure in Inspection Characteristic | |
| 100 | Data Element |
QSYNCRO | Synchronization is Active | |
| 101 | Data Element |
QTOLERANZ | Tolerance Key | |
| 102 | Data Element |
QTOLOB | Upper Specification Limit | |
| 103 | Data Element |
QTOLUN | Lower Tolerance Limit | |
| 104 | Data Element |
QTOLWAB | Date from Which the Tolerance Change Is Valid | |
| 105 | Data Element |
QTOLWBIS | Date Until Which the Tolerance Change Is Valid | |
| 106 | Data Element |
QTOLWOB | Change to Upper Specification Limit | |
| 107 | Data Element |
QTOLWUN | Change to Lower Specification Limit | |
| 108 | Data Element |
QTXT10 | Text Line for Additional Information | |
| 109 | Data Element |
QTXT20 | Text Line for Additional Information | |
| 110 | Data Element |
QTXT40 | Text Line for Additional Information | |
| 111 | Data Element |
QVERSNR | Version Number | |
| 112 | Data Element |
QVERSNRMK | Version Number of the Master Inspection Characteristic | |
| 113 | Data Element |
QVERSNRPM | Version Number of the Inspection Method | |
| 114 | Data Element |
QVORGAEND | Specifications Can Be Changed | |
| 115 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 116 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 117 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 118 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 119 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 120 | Data Element |
QZAEHLER | Plant for the Master Inspection Characteristic | |
| 121 | Data Element |
WERKS_D | Plant |
