Data Element list used by SAP ABAP Table REG30 (Screen Fields: Inst./Rem./Repl./Break Up)
SAP ABAP Table
REG30 (Screen Fields: Inst./Rem./Repl./Break Up) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
![]() |
![]() |
|||
1 | ![]() |
ABLSTAT | Meter Reading Status | |
2 | ![]() |
ABLSTAT | Meter Reading Status | |
3 | ![]() |
ABRFAKT | Billing factor | |
4 | ![]() |
ABRFAKT | Billing factor | |
5 | ![]() |
ABRFAKT | Billing factor | |
6 | ![]() |
ABRFAKT | Billing factor | |
7 | ![]() |
ABRFAKT | Billing factor | |
8 | ![]() |
ADOFPER | Number of days period consumption is valid | |
9 | ![]() |
AKLASSE | Billing class | |
10 | ![]() |
ALTSOBKZ | Special stock indicator for old device | |
11 | ![]() |
ANLAGE | Installation | |
12 | ![]() |
ANZERG | Number of meter reading results per meter reading | |
13 | ![]() |
ANZERG | Number of meter reading results per meter reading | |
14 | ![]() |
ATTR_BEZ | Attribute name | |
15 | ![]() |
ATTR_BEZ | Attribute name | |
16 | ![]() |
ATTR_BEZ | Attribute name | |
17 | ![]() |
AUFNRALT | Order Number of Old Device | |
18 | ![]() |
AUFNRNEU | Order Number of New Device | |
19 | ![]() |
AUSBAU | Remove device | |
20 | ![]() |
BKTXTALT | Document header text for old device | |
21 | ![]() |
BKTXTNEU | Document header text for new device | |
22 | ![]() |
BLIWIRK | Reactive, apparent, or active registers | |
23 | ![]() |
BLIWIRK | Reactive, apparent, or active registers | |
24 | ![]() |
BU_PARTNER | Business Partner Number | |
25 | ![]() |
BWARTALT | Movement type (inventory management) for old device | |
26 | ![]() |
BWARTNEU | Movement type (inventory management) for new device | |
27 | ![]() |
CALOR_AREA | Calorific value district | |
28 | ![]() |
CALOR_AREA | Calorific value district | |
29 | ![]() |
CRGPRESS | Gas correction pressure | |
30 | ![]() |
CRGPRESS | Gas correction pressure | |
31 | ![]() |
DEVGRP1 | Device group of old device (inst./removal/replacement) | |
32 | ![]() |
DEVGRP2 | Device group of new device (inst./removal/replacement) | |
33 | ![]() |
DEVLOC | Device Location | |
34 | ![]() |
DRUCKNR | Device number of pressure regulator | |
35 | ![]() |
DRUCKNR | Device number of pressure regulator | |
36 | ![]() |
EADAT | Activity Date | |
37 | ![]() |
EAGRUPPE | Input/output group | |
38 | ![]() |
EAWKENNZA | Permitted as reason for removal | |
39 | ![]() |
EAWKENNZE | Permitted as reason for installation | |
40 | ![]() |
EAWKENNZW | Permitted as reason for replacement | |
41 | ![]() |
EQUNR | Equipment Number | |
42 | ![]() |
EQUNR | Equipment Number | |
43 | ![]() |
EQUNR | Equipment Number | |
44 | ![]() |
EQUNR | Equipment Number | |
45 | ![]() |
EQUNR | Equipment Number | |
46 | ![]() |
EQUNR | Equipment Number | |
47 | ![]() |
EQUNR | Equipment Number | |
48 | ![]() |
EQUNR | Equipment Number | |
49 | ![]() |
E_DEVICE_NBR | Device Not Relevant for Billing | |
50 | ![]() |
E_MASSBILL | Unit of measurement for billing | |
51 | ![]() |
E_MASSREAD | Unit of measurement for meter reading | |
52 | ![]() |
E_NABLESEN | Do Not Read Register | |
53 | ![]() |
E_TOUPERIOD | Time-of-use type | |
54 | ![]() |
E_ZEITRAUM | Validity period | |
55 | ![]() |
E_ZSPANNP | Register factor: primary transformer voltage | |
56 | ![]() |
E_ZSPANNS | Register factor: secondary transformer voltage | |
57 | ![]() |
E_ZSTROMP | Register factor: primary transformer current | |
58 | ![]() |
E_ZSTROMS | Register factor: secondary transformer current | |
59 | ![]() |
E_ZUSZAHLZW | Volume correction factor | |
60 | ![]() |
E_ZWART | Register type | |
61 | ![]() |
E_ZWART | Register type | |
62 | ![]() |
E_ZWFAKT | Register factor | |
63 | ![]() |
E_ZWGRUPPE | Register Group | |
64 | ![]() |
E_ZWKENN | Register identification | |
65 | ![]() |
E_ZWKENN | Register identification | |
66 | ![]() |
E_ZWNABR | Register not relevant to billing | |
67 | ![]() |
E_ZWNABR | Register not relevant to billing | |
68 | ![]() |
E_ZWNSETTL | Register not relevant to settlement | |
69 | ![]() |
E_ZWNSETTL | Register not relevant to settlement | |
70 | ![]() |
E_ZWNUMMER | Register | |
71 | ![]() |
E_ZWNUMMER | Register | |
72 | ![]() |
E_ZWNUMMER | Register | |
73 | ![]() |
E_ZWSTAND | Meter reading recorded | |
74 | ![]() |
E_ZWSTAND | Meter reading recorded | |
75 | ![]() |
E_ZWTYP | Register category | |
76 | ![]() |
E_ZWTYP | Register category | |
77 | ![]() |
FESTTEMP | Fixed temperature | |
78 | ![]() |
GAS_PRS_AR | Gas Pressure Area | |
79 | ![]() |
GAS_PRS_AR | Gas Pressure Area | |
80 | ![]() |
GERAETALT | Old device | |
81 | ![]() |
GERAETNEU | New device | |
82 | ![]() |
GERTYPALT | Device category | |
83 | ![]() |
GERTYPNEU | Device category | |
84 | ![]() |
GERTYPTXT | Text for basic device category | |
85 | ![]() |
GERTYPTXT | Text for basic device category | |
86 | ![]() |
GERTYPTXT | Text for basic device category | |
87 | ![]() |
GERTYPTXTL | Basic device categories allocated to the device category | |
88 | ![]() |
GERWECHS | Activity reason | |
89 | ![]() |
GEWKEY | Weighting key | |
90 | ![]() |
GRUNDALT | Reason for Moving Old Device | |
91 | ![]() |
GRUNDNEU | Reason for moving new device | |
92 | ![]() |
GVERRECH | Pay rental price | |
93 | ![]() |
GVERRECH | Pay rental price | |
94 | ![]() |
GVERRECH | Pay rental price | |
95 | ![]() |
GVERRECH | Pay rental price | |
96 | ![]() |
HAUS | Connection Object | |
97 | ![]() |
HOEKORR | Altitude correction pressure | |
98 | ![]() |
HOEKORR | Altitude correction pressure | |
99 | ![]() |
INFOFIELDEG30 | Information on device for installation/removal/replacement | |
100 | ![]() |
INTSIZEID | Interval Length ID | |
101 | ![]() |
KENNZIFF | Code for Identifying a Register | |
102 | ![]() |
KENNZIFF | Code for Identifying a Register | |
103 | ![]() |
KENNZX | Indicators | |
104 | ![]() |
KENNZX | Indicators | |
105 | ![]() |
KENNZX | Indicators | |
106 | ![]() |
KOMGRP | ARCR Command Group | |
107 | ![]() |
KOMGRP | ARCR Command Group | |
108 | ![]() |
KONDIGR | Rate fact group | |
109 | ![]() |
KONDIGR | Rate fact group | |
110 | ![]() |
KONDIGR | Rate fact group | |
111 | ![]() |
KOSTLALT | Cost Center of Old Device | |
112 | ![]() |
KOSTLNEU | Cost Center of New Device | |
113 | ![]() |
KZAHLE | Gas law deviation factor (set) | |
114 | ![]() |
KZAHLE | Gas law deviation factor (set) | |
115 | ![]() |
KZAHLT | Actual gas law deviation factor | |
116 | ![]() |
KZAHLT | Actual gas law deviation factor | |
117 | ![]() |
KZMESSW | Nonmetering register | |
118 | ![]() |
LGORTALT | Receiving storage location for old device | |
119 | ![]() |
LGORTNEU | Receiving storage location for new device | |
120 | ![]() |
MANDT | Client | |
121 | ![]() |
MASSBILLC6 | Unit of measurement for billing | |
122 | ![]() |
MEINS_ISU | Unit of measurement for meter reading | |
123 | ![]() |
MESSDRCK | Measured Pressure (Outlet Pressure) in Bars | |
124 | ![]() |
MESSDRCK | Measured Pressure (Outlet Pressure) in Bars | |
125 | ![]() |
MESSDRCK | Measured Pressure (Outlet Pressure) in Bars | |
126 | ![]() |
MESSDRCK | Measured Pressure (Outlet Pressure) in Bars | |
127 | ![]() |
MESSDRCK | Measured Pressure (Outlet Pressure) in Bars | |
128 | ![]() |
NENNBEL | Nominal load | |
129 | ![]() |
NEUSOBKZ | Special stock indicator for new device | |
130 | ![]() |
NOTSAMPDEV | Do not use device as sample device | |
131 | ![]() |
PERVERBR | Period Consumption | |
132 | ![]() |
PERVERBRD | Period Consumption | |
133 | ![]() |
PREISKLA | Price Class | |
134 | ![]() |
PREISKLA | Price Class | |
135 | ![]() |
PRIMWNR | Winding number of active primary winding | |
136 | ![]() |
PRIMWNR | Winding number of active primary winding | |
137 | ![]() |
PRIMWNR | Winding number of active primary winding | |
138 | ![]() |
PRIMWNR | Winding number of active primary winding | |
139 | ![]() |
PROFEST | Consumption fixed value to be weighted linearly | |
140 | ![]() |
PROGT | ARCR Command | |
141 | ![]() |
PROGT | ARCR Command | |
142 | ![]() |
PROPROZ | Consumption percentage for weighting | |
143 | ![]() |
PRUEFKL | Validation class for independent validations | |
144 | ![]() |
PR_AREA_AI | Air pressure area | |
145 | ![]() |
PR_AREA_AI | Air pressure area | |
146 | ![]() |
RABZUS | Discount key | |
147 | ![]() |
SEKWNR | Winding number of active secondary winding | |
148 | ![]() |
SEKWNR | Winding number of active secondary winding | |
149 | ![]() |
SEKWNR | Winding number of active secondary winding | |
150 | ![]() |
SEKWNR | Winding number of active secondary winding | |
151 | ![]() |
SERCODE | Service Type | |
152 | ![]() |
SERVICETEXT | Text for Service Type | |
153 | ![]() |
SPARTE | Division | |
154 | ![]() |
SPARTE | Division | |
155 | ![]() |
SPARTYP | Division category | |
156 | ![]() |
SPARTYP | Division category | |
157 | ![]() |
SPARTYP | Division category | |
158 | ![]() |
SPARTYP | Division category | |
159 | ![]() |
STANZNAC | Places after the decimal in a register | |
160 | ![]() |
STANZVOR | Places before the decimal point in a register | |
161 | ![]() |
STEUERGRP | Control group for multiple meter reading order creation | |
162 | ![]() |
TABACT | Current device location from device location list | |
163 | ![]() |
TABMAX | Number of devices accessed during device installation | |
164 | ![]() |
TARIFART | Rate Type | |
165 | ![]() |
TARIFART | Rate Type | |
166 | ![]() |
TARIFART | Rate Type | |
167 | ![]() |
TARIFART | Rate Type | |
168 | ![]() |
TARIFTYP | Rate category | |
169 | ![]() |
TEMP_AREA | Temperature area | |
170 | ![]() |
TEMP_AREA | Temperature area | |
171 | ![]() |
TEXT30 | Text (30 Characters) | |
172 | ![]() |
THGBER | Inclusion of factors in thermal gas billing | |
173 | ![]() |
THGVER | Gas procedure | |
174 | ![]() |
THGVER | Gas procedure | |
175 | ![]() |
TRENR | ARCR device number | |
176 | ![]() |
TRENR | ARCR device number | |
177 | ![]() |
UEBERVER | Transformation ratio | |
178 | ![]() |
UEBERVER | Transformation ratio | |
179 | ![]() |
USE_PRE_REGREL | Create register relationships acc. to sample from reg. group | |
180 | ![]() |
VERBGL | Loss of certifiction if removed/replaced | |
181 | ![]() |
VERLOS | Indicator: Loss of lot membership if removed/replaced | |
182 | ![]() |
VORBEREI | Device prepared | |
183 | ![]() |
VTXTK | Name | |
184 | ![]() |
WANDART | Transformer type | |
185 | ![]() |
WANDART | Transformer type | |
186 | ![]() |
WANDNR | Device no. of transformer | |
187 | ![]() |
WANDNR | Device no. of transformer | |
188 | ![]() |
WEMPFALT | Goods recipient for old device | |
189 | ![]() |
WEMPFNEU | Goods recipient for new device | |
190 | ![]() |
WERKSALT | Receiving plant for old device | |
191 | ![]() |
WERKSNEU | Receiving plant for new device | |
192 | ![]() |
WGRUPPE | Winding group |