SAP ABAP Table QGEVAL_CHARACTERISTIC (QM Evaluations: Data Structure for Characteristics)

Hierarchy

☛ EA-APPL (Software Component) SAP Enterprise Extension PLM, SCM, Financials
   ⤷ QM-QC-AQC (Application Component) Active Quality Control
     ⤷ QG_EVAL (Package) QM: Online Evaluations

Basic Data

Table Category	INTTAB	Structure
Structure	QGEVAL_CHARACTERISTIC	Table Relationship Diagram
Short Description	QM Evaluations: Data Structure for Characteristics

Delivery and Maintenance

Pool/cluster
Delivery Class
Data Browser/Table View Maintenance	Display/Maintenance Allowed with Restrictions

Components

	Field	Key	Data Element	Domain	Data Type	Length	Decimal Places	Short Description	Check table
1	PRUEFLOS	☐	QPLOS	QPLOS	NUMC	12	0	Inspection Lot Number	*
2	TEILLOS	☐	QTLOS	QTLOS	NUMC	6	0	Partial lot number	*
3	VORGLFNR	☐	QLFNKN	KNTNR	NUMC	8	0	Current Node Number from Order Counter APLZL
4	PROBENR	☐	QPROBENRPP	QPROBENR	NUMC	6	0	Sample Number (Based on an Inspection Point)	*
5	MERKNR	☐	QMERKNRP	QMERKNRP	NUMC	4	0	Inspection Characteristic Number
6	VORNR	☐	VORNR	VORNR	CHAR	4	0	Operation/Activity Number
7	SATZSTATUS	☐	QBEASTATUS	QSTATUS	CHAR	1	0	Results Record Status	*
8	ATTRIBUT	☐	QATTRIBUT	QATTRIBUT	CHAR	1	0	Attribute of the Results Record (Valid, Invalid,...)
9	QERGDATH	☐	QERGDATH	QERGDATH	CHAR	2	0	Origin of Results Data	*
10	ERSTELLDAT	☐	QDATUMERST	DATUM	DATS	8	0	Date on Which the Data Record Was Created
11	AENDERDAT	☐	QDATUMAEND	DATUM	DATS	8	0	Date on Which Data Record Was Changed
12	DBEWERTG	☐	QDBEWERTG	QEEBEWERTG	CHAR	1	0	Valuation of the Characteristic for Dynamic Modification
13	MBEWERTG	☐	QMBEWERTG	QEEBEWERTG	CHAR	1	0	Inspection Result Valuation
14	PRUEFDATUV	☐	QPRUEFDATV	DATUM	DATS	8	0	Inspection Start Date
15	PRUEFZEITV	☐	QPRUEFZTV	QZEIT	TIMS	6	0	Starting Time of the Inspection
16	PRUEFBEMKT	☐	QKURZTEXT	QKURZTEXT	CHAR	40	0	Short Text
17	ISTSTPANZ	☐	QANZSTIPRO	QANZAHL2	INT2	5	0	Number of Partial Samples for the Characteristic
18	ISTSTPUMF	☐	QISTSTPUMF	QANZAHL4	INT4	10	0	Number of Recorded Sample Units
19	ANZFEHLEH	☐	QANZFEHEH4	QANZAHL4	INT4	10	0	Number of Nonconforming Sample Units
20	ANZFEHLER	☐	QANZFEHL4	QANZAHL4	INT4	10	0	Number of Defects Found
21	ANZWERTO	☐	QANZWERTO4	QANZAHL4	INT4	10	0	Number of Measured Values Above the Tolerance Range
22	ANZWERTU	☐	QANZWERTU4	QANZAHL4	INT4	10	0	Number of Measured Values Below the Tolerance Range
23	ANZWERTG	☐	QANZWERTG4	QANZAHL4	INT4	10	0	Number of Inspected Sample Units
24	MAXWERT	☐	QMAXWERT	QSTATWERT	FLTP	16	16	Maximum Value of the Valid Measured Values
25	MINWERT	☐	QMINWERT	QSTATWERT	FLTP	16	16	Minimum Value of the Valid Measured Values
26	MITTELWERT	☐	QMITTELWRT	QSTATWERT	FLTP	16	16	Arithmetic Mean of Valid Measured Values
27	VARIANZ	☐	QVARIANZ	QSTATWERT	FLTP	16	16	Dispersion (Variance) of Valid Measured Values
28	ANTEILO	☐	QANTEILO	QSTATWERT	FLTP	16	16	Estimated Fraction Above the Tolerance Range
29	ANTEILU	☐	QANTEILU	QSTATWERT	FLTP	16	16	Estimated Fraction Below the Tolerance Range
30	IVARIANZ	☐	QIVARIANZ	QSTATWERT	FLTP	16	16	Internal Dispersion of Valid Measured Values
31	KATALGART1	☐	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
32	AUSWMENGE1	☐	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
33	AUSWMGWRK1	☐	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
34	GRUPPE1	☐	QCODEGRP	QCODEGRP	CHAR	8	0	Code Group	*
35	CODE1	☐	QCODE	QCODE	CHAR	4	0	Code	*
36	VERSION1	☐	QVERSNR	QVERSNR	CHAR	6	0	Version Number
37	FEHLKLAS	☐	QFEHLKLAS	QFEHLKLAS	CHAR	2	0	Defect class	*
38	QRKNR	☐	QQRKNR	QQRKNR	NUMC	12	0	Control Chart Number	*
39	PRSTUFE	☐	QPRSTUFE	QPRSTUFE	NUMC	4	0	Inspection Stage	*
40	PRSCHAERFE	☐	QPRSCHAERF	QPRSCHAERF	NUMC	3	0	Inspection Severity	*
41	QPMK_WERKS	☐	QZAEHLER	QZAEHLER	CHAR	4	0	Plant for the Master Inspection Characteristic
42	VERWMERKM	☐	QMERKNR	QMERKNR	CHAR	8	0	Master Inspection Characteristics	*
43	MKVERSION	☐	QVERSNRMK	QVERSNR	CHAR	6	0	Version Number of the Master Inspection Characteristic
44	PMETHODE	☐	QPMETHODE	QPMETHODE	CHAR	8	0	Inspection Method	*
45	STELLEN	☐	QSTELLEN	QSTELLEN	INT1	3	0	Number of Places to the Right of a Decimal Point (Accuracy)
46	MASSEINHSW	☐	QMASSEH	MEINS	UNIT	3	0	Unit of Measurement, in Which Quantitative Data Is Stored	*
47	SOLLWERT	☐	QSOLLWERTE	QSOLLWERTE	FLTP	16	16	Target Value for a Quantitative Characteristic
48	TOLERANZOB	☐	QTOLOB	QSOLLWERTE	FLTP	16	16	Upper Specification Limit
49	TOLERANZUN	☐	QTOLUN	QSOLLWERTE	FLTP	16	16	Lower Tolerance Limit
50	ANTVERF	☐	QEANTVERF	QEANTVERF	CHAR	2	0	Fraction Calculation	*
51	MENGENEINH	☐	QPROBEMGEH	MEINS	UNIT	3	0	Base Unit of Measure for the Sample Unit	*
52	CHARACT_ID1	☐	QCHARACT_ID1	QCHARACT_ID	CHAR	40	0	Characteristic Description for Quality Data Exchange
53	MASCHINE	☐	QMASCHINE	QEQUNR	CHAR	18	0	General Information
54	.INCLUDE	☐				0	0	Characteristic control indicators
55	QUANTITAT	☐	QKZQUNMK	QKZ	CHAR	1	0	Quantitative Characteristic
56	MESSWERTE	☐	QKZQUMK	QKZ	CHAR	1	0	Measured Values Must Be Recorded
57	PRUEFKAT	☐	QKZPKAT	QKZ	CHAR	1	0	Reference to Characteristic Attribute Required
58	TOLEROBEN	☐	QKZTOLOB	QKZ	CHAR	1	0	Upper Specification Limit
59	TOLERUNTEN	☐	QKZTOLUN	QKZ	CHAR	1	0	Lower Specification Limit
60	SOLLPRUEF	☐	QKZSOLLPR	QKZ	CHAR	1	0	Check Target Value
61	PUMFKZ	☐	QPUMFKZ	QPUMFKZ	CHAR	1	0	Inspection Scope
62	LZEITKZ	☐	QLZEITKZ	QKZ	CHAR	1	0	Long-Term Inspection
63	ESTUKZ	☐	QESTUKZ	QESTUKZ	CHAR	1	0	Recording Type
64	DOKUKZ	☐	QDOKUKZ	QDOKUKZ	CHAR	1	0	Documentation Required for Inspection Results
65	RZWANG	☐	QRZWANG	QRZWANG	CHAR	1	0	Characteristic Category
66	SYNCRO	☐	QSYNCRO	QKZ	CHAR	1	0	Synchronization is Active
67	ADDPRO	☐	QADDPRO	QKZ	CHAR	1	0	Sample Quantity Is Added
68	ZERSTPRF	☐	QKZDESTROY	QKZ	CHAR	1	0	Destructive Inspection
69	FORMELMK	☐	QKZFORMEL	QKZFORMEL	CHAR	1	0	Calculated Characteristic
70	STICHPR	☐	QSTICHPR	QKZ	CHAR	1	0	Sampling Procedure is Required
71	AUSSLOS	☐	QAUSSLOS	QKZ	CHAR	1	0	Characteristic Relevant for Qual. Score and Scrap Share
72	FIXIERT	☐	QNAENDKZ	QKZ	CHAR	1	0	Default Control Indicators Cannot Be Changed
73	BEWFHLZHL	☐	QBFHLZHL	QKZ	CHAR	1	0	Recording the Number of Defects
74	LSTKZ	☐	QLEITSTKZ	QKZ	CHAR	1	0	Control Characteristics Results - QM Subsystem
75	VORGAEND	☐	QVORGAEND	QKZ	CHAR	1	0	Specifications Can Be Changed
76	PMMZWANG	☐	QPMZWANG	QKZ	CHAR	1	0	Assignment of Test Equipment Required
77	FEHLREC	☐	QFEHLREC	QKZ	CHAR	1	0	Defects Recording Automatically Called Up
78	AENDBELEG	☐	QKZAENBEL	QKZ	CHAR	1	0	Create Change Documents During Results Recording
79	QSPCMK	☐	QSPCMK	QKZ	CHAR	1	0	SPC Characteristic
80	KEINDRUCK	☐	QDRUCK1	QDRUCK1	CHAR	1	0	Print
81	PARA	☐	QPARA	QKZ	CHAR	1	0	Control Indicator "Parameter Characteristic" Set/Not Set
82	PROCESSMK	☐	QKZPROCCHAR	QKZ	CHAR	1	0	Process Characteristic
83	TSTICHPRKZ	☐	QTSTICHPRO	QKZUMFS	CHAR	1	0	Partial Samples Possible
84	SOLLWERT_C	☐	QSOLLWERTC	QSOLLWERTC	CHAR	16	0	Target Value for a Quantitative Characteristic
85	TOLERANZOB_C	☐	QTOLOBC	QSOLLWERTC	CHAR	16	0	Upper Specification Limit
86	TOLERANZUN_C	☐	QTOLUNC	QSOLLWERTC	CHAR	16	0	Lower Specification Limit
87	MITTELWERT_C	☐	QMITTEWRTC	QSTATWERTC	CHAR	16	0	Arithmetic Mean of Valid Measured Values
88	STDABW_C	☐	QSTDAWC	QSTATWERTC	CHAR	16	0	Standard Deviation of Valid Measured Values
89	VARIANZ_C	☐	QVARIANZC	QSTATWERTC	CHAR	16	0	Dispersion (Variance) of Valid Measured Values
90	MAXWERT_C	☐	QMAXWERTC	QSTATWERTC	CHAR	16	0	Maximum Value of the Valid Measured Values
91	MINWERT_C	☐	QMINWERTC	QSTATWERTC	CHAR	16	0	Minimum Value of the Valid Measured Values
92	ANTEILO_C	☐	QANTEILOC	QSTATWERTC	CHAR	16	0	Estimated Fraction Above the Tolerance Range
93	ANTEILU_C	☐	QANTEILUC	QSTATWERTC	CHAR	16	0	Estimated Fraction Below the Tolerance Range
94	CODE1_C	☐	QCODETEXT	QTEXT80	CHAR	80	0	Description of a Code in the Catalog
95	CHAR_TEXT	☐	QMKKURZTXT	QKURZTEXT	CHAR	40	0	Short Text for the Inspection Characteristic
96	MASSEINH6	☐	QMEAS_UNIT	TEXT6	CHAR	6	0	Unit of Measurement (Internal Code)
97	PRPLATZ	☐	QPRPLATZ	ARBPL	CHAR	8	0	Work Center
98	ZEITERSTL	☐	QZEITERSTL	QZEIT	TIMS	6	0	Time at which data record was created
99	ZEITAEND	☐	QZEITAEND	QZEIT	TIMS	6	0	Time at which data record was last changed
100	.INCLUDE	☐				0	0	Evaluations: Fields Not Relevant for Characteristic Grouping
101	BATCH_HIERARCHY	☐	QGEVAL_BATCH_HIERARCHY	QGEVAL_BATCH_HIERARCHY	CHAR	30	0	Batch Hierarchy
102	CHARG	☐	CHARG_D	CHARG	CHAR	10	0	Batch Number	*

History

Last changed by/on	SAP	20130529
SAP Release Created in	600