SAP ABAP Message Class AC (Error messages from Asset Customizing)
Basic Data
Hierarchy
☛
BBPCRM (Software Component) BBPCRM
⤷ CRM (Application Component) Customer Relationship Management
⤷ CRM_APPLICATION (Package) All CRM Components Without Special Structure Packages
⤷ AC (Package) Application Development R/3 Assets: Customizing
⤷ CRM (Application Component) Customer Relationship Management
⤷ CRM_APPLICATION (Package) All CRM Components Without Special Structure Packages
⤷ AC (Package) Application Development R/3 Assets: Customizing
Attributes
Message class | AC | |
Short Description | Error messages from Asset Customizing | |
Changed On | 20131127 | |
Last Changed At | 180701 |
Messages
# | Message | Message Short Text | Documentation status | Authorization check |
---|---|---|---|---|
1 | 000 | Error messages for Asset Customizing ........................ | ||
2 | 001 | Inv.supp. &1: End of validity period should be after the beginning | Space: object requires documentation | |
3 | 002 | Position cursor on valid row | ||
4 | 003 | Choose a chart of depreciation | ||
5 | 004 | Processing terminated: Please contact system administrator | ||
6 | 005 | No company code was selected | ||
7 | 006 | Company code & has different chart of depreciation | ||
8 | 007 | Investment support measure saved | ||
9 | 008 | Inv.supp. &1: Enter a maximum amount limit | Space: object requires documentation | |
10 | 009 | Inv.supp. &1: Enter a required period of retention | Space: object requires documentation | |
11 | 010 | Specify a base depreciation area | ||
12 | 011 | &2 Depreciation area &1 does not exist | Space: object requires documentation | |
13 | 012 | Chart-of-depreciation-dependent assignment to asset class &1 not possible | Space: object requires documentation | |
14 | 013 | Real area &2 must be smaller than the derived area &1 | Space: object requires documentation | |
15 | 014 | The percentage rate cannot be larger than 100.00 percent | ||
16 | 015 | No further processing (Contact your System Specialist) | ||
17 | 016 | Depreciation area & already exists | ||
18 | 017 | Areas that adopt identical values are included | Space: object requires documentation | |
19 | 018 | Inv.supp. &1: Enter a start date for retention period | Space: object requires documentation | |
20 | 019 | Area & exceeds max. number of automatic entries to reconciliation account | ||
21 | 020 | Investment key & will be deleted when you save | ||
22 | 021 | Investment key & deleted | ||
23 | 022 | Specify a valid depreciation area | ||
24 | 023 | Generic entry & incorrectly entered | ||
25 | 024 | Area specifications saved | ||
26 | 025 | Investment support is not allowed in depreciation area & | ||
27 | 026 | Areas that adopt identical values are removed | Space: object requires documentation | |
28 | 027 | Plausibility specifications saved | ||
29 | 028 | Processing terminated (contact your system administrator) | ||
30 | 029 | Company code & is already in use | ||
31 | 030 | Choose a field selection list | ||
32 | 031 | Choose only one field selection list | ||
33 | 032 | Function & not allowed (check your entry) | ||
34 | 033 | Choose a field group | ||
35 | 034 | Choose a table entry | ||
36 | 035 | Position the cursor on entry "&" | ||
37 | 036 | Enter a name for the field group list | ||
38 | 037 | You cannot create (Entry & already exists) | ||
39 | 038 | SYST: Record "&" cannot be inserted (contact your system specialist) | ||
40 | 039 | Company code & not defined for Asset Accounting | ||
41 | 040 | All entries have been deleted for screen layout control "&" | ||
42 | 041 | Screen layout control "&" was created | ||
43 | 042 | Screen layout control "&" does not exist | ||
44 | 043 | Field group "&" does not exist in the field group table | ||
45 | 044 | As screen selection, enter 'Req', 'Opt.' or 'No' | ||
46 | 045 | With screen selection 'No', do not choose any other screen selection | ||
47 | 046 | Select at least one option in the maintenance level | ||
48 | 047 | Field group "&" was deleted from the list | ||
49 | 048 | Company code & not defined for Asset Accounting | Space: object requires documentation | |
50 | 049 | No company code uses chart of depreciation & | ||
51 | 050 | Area &: Setting "Area for reporting purposes only" indicator not allowed | Space: object requires documentation | |
52 | 051 | Enter a value adjustment account | Space: object requires documentation | |
53 | 052 | Net worth area & does not exist | ||
54 | 053 | Legacy data transfer date is not in the past | ||
55 | 054 | Complete the specifications for legacy data transfer | ||
56 | 055 | Transaction type & is not defined | ||
57 | 056 | SYST: Locking not possible (contact your system specialist) | ||
58 | 057 | Saving not necessary since nothing was changed | ||
59 | 058 | Investment support area manages acquisition values | ||
60 | 059 | Investment support area does not manage investment support measures | ||
61 | 060 | Area does not manage acquisition values | ||
62 | 061 | The entries were saved | ||
63 | 062 | SYST: Update cancelled at change & (contact your system specialist) | ||
64 | 063 | Rules 03 and 09 cannot be used in company code & | ||
65 | 064 | No depreciation key with time-dependent period control is defined. | ||
66 | 065 | Chart of depreciation & was set | ||
67 | 066 | Account control was saved | ||
68 | 067 | Document type &1 for deprec. posting in co.code &2 does not exist | ||
69 | 068 | Document type &1 for dep. posting in co.code &2 is not for batch input | Space: object requires documentation | |
70 | 069 | Doc. type &3 for dep. posting in co.code &2 not defined for acct. type &1 | ||
71 | 070 | Target and source calculation keys are identical | ||
72 | 071 | Target depreciation key & exists already | ||
73 | 072 | Source depreciation key & does not exist | ||
74 | 073 | Min. percentage rate must be less than max. percentage rate. | ||
75 | 074 | Changeover key not allowed for depreciation method & | ||
76 | 075 | Levels only allowed for methods 'P', 'G', 'D' and 'V' | Space: object requires documentation | |
77 | 076 | Changeover key & has not been created. | ||
78 | 077 | For method 'D', dep. is not allowed after the end of planned life | ||
79 | 078 | Changeover percentage only allowed with changeover methods 2 and 7 | Space: object requires documentation | |
80 | 079 | In depreciation method &, you cannot make percentage specifications | ||
81 | 080 | Multiplication factor only allowed for method 'D' and 'P'. | ||
82 | 081 | Percentage rate specification missing. | ||
83 | 082 | Enter a method of depreciation. | ||
84 | 083 | You cannot have unit-of-prod.dep. with depreciation to the day | ||
85 | 084 | Enter a base value indicator. | ||
86 | 085 | Entries saved | ||
87 | 086 | You cannot change document type since depreciation has been posted | ||
88 | 087 | Control data currently blocked by & | ||
89 | 088 | SYST: Error when changing dep.area control (Contact System Specialist) | ||
90 | 089 | Entries were transferred (check control of legacy data transfer) | ||
91 | 090 | You cannot delete depreciation area & manually | Space: object requires documentation | |
92 | 091 | Manual entries are not possible (area defined to adopt identical values) | Space: object requires documentation | |
93 | 092 | Dep. after end of planned life and rem.life dep. are contradictory. | ||
94 | 093 | Position your cursor on a valid line | ||
95 | 094 | Account & not defined | ||
96 | 095 | Catch-up and support by years are not allowed at the same time | ||
97 | 096 | Enter a target calculation key | ||
98 | 097 | Dep. method & not allowed with base value 'acquisition' | ||
99 | 098 | Enter a changeover method. | ||
100 | 099 | Changeover percentage rate missing. | ||
101 | 100 | Asset history sheet version & & saved | ||
102 | 101 | Asset history sheet version & & deleted | ||
103 | 102 | Asset history sheet version & & already exists | ||
104 | 103 | Choose a valid history sheet item | ||
105 | 104 | Transaction allocations to item & & will be deleted too | ||
106 | 105 | Enter the total number of units. | ||
107 | 106 | Remaining no. of units will be negative in co.code &1, key &2. Correct. | ||
108 | 107 | No additions possible in display mode. | ||
109 | 108 | You are not allowed to assign standard tab layout '&1' | Space: object requires documentation | |
110 | 109 | Maximum of 8 columns allowed | ||
111 | 110 | Transaction type & exists already. | ||
112 | 111 | Target and source transaction types cannot be identical | ||
113 | 112 | Source transaction type & does not exist. | ||
114 | 113 | Transaction type & does not exist. Correct your entry | ||
115 | 114 | Transaction type & not allowed here - correct your entry | ||
116 | 115 | Transaction type & is a default transaction type. You cannot delete it | ||
117 | 116 | Transaction type & is reference for TTy &. You cannot delete it | ||
118 | 117 | Name ranges "Ixx" to "Kxx", and "Rxx" and "QKI" are reserved | ||
119 | 118 | Transaction type &1 still used as "&2" in &3 "&4" (cannot delete) | Space: object requires documentation | |
120 | 119 | Repair Customizing of fiscal year variants using RAPERIV01 | Space: object requires documentation | |
121 | 120 | Transport object & not defined | ||
122 | 121 | Transport entries only possible when your changes are saved | ||
123 | 122 | End of selected area is before the beginning of the selected area | ||
124 | 123 | No entries selected | ||
125 | 124 | Correction number & is already released | ||
126 | 125 | Correction number & is blocked | ||
127 | 126 | Correction number & is not defined | ||
128 | 127 | Correction number & is not a correction (transport request?) | ||
129 | 128 | & is not a logical object | ||
130 | 129 | No entry in TADIR for object & | ||
131 | 130 | Object name & is too long or is not specified | ||
132 | 131 | Objects were included in correction & | ||
133 | 132 | Entry can no longer be processed (already included in correction ) | ||
134 | 133 | Entry &1 deleted from correction &2 | ||
135 | 134 | Transport object & not defined | ||
136 | 135 | Object & is blocked by other correction | ||
137 | 136 | Correction & belongs to another user. | ||
138 | 138 | Enter a correct transaction type | ||
139 | 139 | Enter a correct transaction type | ||
140 | 140 | Revaluation key & deleted | ||
141 | 141 | &2 Revaluation area &1 is incorrectly defined | Space: object requires documentation | |
142 | 142 | &2 Base depreciation area &1 is incorrectly defined | Space: object requires documentation | |
143 | 143 | Specifications for revaluation saved | ||
144 | 144 | &2 The revaluation has no description | Space: object requires documentation | |
145 | 145 | Area & is not intended for revaluation | ||
146 | 146 | Areas that adopt identical values are included | Space: object requires documentation | |
147 | 147 | Area & exceeds the maximum number of postings | ||
148 | 148 | &2 Depreciation area &1 adopts identical depreciation terms | Space: object requires documentation | |
149 | 149 | The indicator may not be deleted | ||
150 | 150 | Delivery chart of depreciation no longer exists | ||
151 | 151 | You can no longer change the delivery chart of depreciation | ||
152 | 152 | Base area activated at the same time | ||
153 | 153 | Chart of depreciation already exists | ||
154 | 154 | SYST: Updating terminated in table & (Contact your system specialist) | ||
155 | 155 | Chart of depreciation & created | ||
156 | 156 | Chart of depreciation text changed | ||
157 | 157 | Chart of depreciation & changed | ||
158 | 158 | Chart of depreciation & deleted | ||
159 | 159 | Account &1 not defined in chart of accounts &2 | ||
160 | 160 | Revaluation &2: Revaluation area &1 cannot be deleted | Space: object requires documentation | |
161 | 161 | Specifications saved | ||
162 | 165 | 'Investment support only' : No option 'net book value' | ||
163 | 166 | Area & is not a real area | ||
164 | 167 | Select one option only for posting of asset values | Space: object requires documentation | |
165 | 168 | Do not select two identical positions | ||
166 | 169 | Rounding acquistion value: Currency only has & decimal places | ||
167 | 170 | Rounding net book value: Currency only has & decimal places | ||
168 | 171 | Closed fiscal year is not in the past | ||
169 | 173 | &1 can be ready for input only if &2 is also ready for input | Space: object requires documentation | |
170 | 174 | Account assignment object &1 is activated although &2 is deactivated | Space: object requires documentation | |
171 | 183 | Rounding specifications are incorrect | ||
172 | 184 | Investment support area: Maintain via 'Investment support' | ||
173 | 185 | When you save, account determination & will be deleted | ||
174 | 186 | Transfer date & is in a closed fiscal year | ||
175 | 187 | Transfer date & is more than one year after the closed fiscal year. | ||
176 | 188 | Check number range specification for company code &1 | Space: object requires documentation | |
177 | 189 | Area & is not completely defined | ||
178 | 191 | & &: Real depreciation areas can only be subtracted! | Space: object requires documentation | |
179 | 192 | Number range interval in co.code &1 is not defined for document type &2 | ||
180 | 193 | Number range object &1 in co.code &2 for doc. type &3 is not defined | ||
181 | 194 | Number range &1 in co.code &2 for doc.type &3 must be defined as external | Space: object requires documentation | |
182 | 195 | Derived area is incorrectly defined | ||
183 | 196 | Number range &1 in co.code &2 for doc.type &3 must be defined as internal | Space: object requires documentation | |
184 | 197 | Document type &1 for periodic APC posting does not exist in co.code &2 | Space: object requires documentation | |
185 | 199 | Closed fiscal year does not agree with legacy data transfer date | ||
186 | 200 | Inv.supp. &1: Base depreciation area has no acquisition values | Space: object requires documentation | |
187 | 201 | Choose one option only | ||
188 | 202 | Asset view is not active. Choose another view | ||
189 | 204 | Company code should not use half periods | ||
190 | 205 | Company code should work with half periods | ||
191 | 206 | You cannot make changes (Key & deleted) | ||
192 | 207 | New depreciation key & deleted. | ||
193 | 209 | When you save, depreciation key & will be deleted | ||
194 | 210 | Key chosen is marked for deletion. | ||
195 | 212 | Specifications for ordinary depreciation are not consistant | ||
196 | 213 | Specifications for interest calculation are not consistent | ||
197 | 214 | You do not need to make specifications for correcting past depreciation | ||
198 | 215 | Specifications for correcting past depreciation are required | ||
199 | 217 | New cutoff value key & deleted. | ||
200 | 218 | Selected depreciation area & is not defined for account assignment | ||
201 | 219 | Cutoff value key & will be deleted when you save | ||
202 | 220 | You can only specify half periods for fiscal yr. variants with 12 periods | ||
203 | 221 | Enter at least one percentage rate | ||
204 | 222 | You have not entered a cutoff percentage rate | ||
205 | 223 | Please activate an asset view | ||
206 | 224 | You cannot deactivate the asset view 'legacy data' | ||
207 | 225 | Percentage rate will be deleted when you save | ||
208 | 226 | Transfer area must be smaller than area &1 in ch.of depreciation &2. | ||
209 | 227 | Position cursor on a valid field | ||
210 | 228 | Field chosen is blank or 0 (initial) | ||
211 | 229 | Depreciation key & is defined with different type | ||
212 | 230 | Area &1 in ch.of deprec. &3 cannot be used as a reference area | Space: object requires documentation | |
213 | 231 | No long text exists for the chosen object & | ||
214 | 232 | Long text for object & changed | ||
215 | 233 | Long text created for object & | ||
216 | 238 | Chart of depreciation is still being used in company code & | ||
217 | 239 | Depreciation area &1 manages values or parameters for other areas | Space: object requires documentation | |
218 | 240 | Depreciation area & cannot be deleted | ||
219 | 241 | Depreciation area & is still required for area & | ||
220 | 242 | You can only start this report via a transaction | ||
221 | 243 | A chart of depreciation name cannot start with '0' | ||
222 | 245 | You cannot delete depreciation area & | Space: object requires documentation | |
223 | 246 | Caution: generic values for real depreciation area (refer to long text) | Space: object requires documentation | |
224 | 247 | Chart of depreciation & not defined | ||
225 | 248 | Chart of depreciation & is not active | ||
226 | 249 | Net worth tax area cannot be a derived area | ||
227 | 250 | Net worth tax area has no specifications for this company code | ||
228 | 251 | Legacy data transfer indicator is incorrectly defined (&) | ||
229 | 252 | For fiscal year variant &, the period rules are not defined | ||
230 | 253 | Position your cursor on an error message to select | ||
231 | 257 | Choose 'Acquisition only allowed in capitalization year' | ||
232 | 258 | You are not authorized to access this control data | ||
233 | 259 | You do not have authorization to change the control data | ||
234 | 260 | Processing cancelled: Table & not in TDDAT | ||
235 | 261 | When you save, index series & will be deleted | ||
236 | 262 | You cannot make changes (index series & deleted) | ||
237 | 263 | Incorrect key name for the new index series | ||
238 | 264 | You cannot transfer values for depreciation area &1 | ||
239 | 265 | Option 'Cumulative dep. calculation' is taken over in other areas | ||
240 | 268 | You cannot deactivate this area | ||
241 | 269 | Enter a valid posting cycle also | ||
242 | 270 | Revaluation of APC is not possible | ||
243 | 272 | You have no chart of depreciaiton | ||
244 | 273 | No maintenance authorization --> You can only display | ||
245 | 274 | Transferred fiscal year variant & is not defined | ||
246 | 275 | Total no. of units is smaller than sum of no. of units from the periods | ||
247 | 276 | Fiscal year variant & not allowed | ||
248 | 277 | Processing terminated. Inform your system administrator. | ||
249 | 278 | Fiscal year & has already been created. | ||
250 | 279 | The fiscal year & to be copied has not yet been created. | ||
251 | 281 | Investment support key & is not allowed. | ||
252 | 282 | Revaluation key & is not allowed. | ||
253 | 283 | No entries were found for chart of accounts & | ||
254 | 284 | Asset accounting does not permit deleting chart of accounts & | ||
255 | 286 | Also set the indicator for 'Calculation after end of useful life.' | ||
256 | 287 | Please check treatment after end of useful life. | ||
257 | 288 | Errors were found | ||
258 | 289 | Incorrect parameters assigned to the function module. | ||
259 | 290 | Chart of accounts & is not defined in Asset Accounting | ||
260 | 292 | You cannot delete. There has to be a level available. | ||
261 | 293 | CAUTION: More than one fiscal year processed (see long text) | Space: object requires documentation | |
262 | 294 | Perform deprecation recalculation for company code &1 | Space: object requires documentation | |
263 | 295 | Your entry is incorrect | ||
264 | 296 | Chart of depreciation & is not defined | ||
265 | 297 | Depreciation key & is not defined | ||
266 | 298 | Depreciation key $ is already defined | ||
267 | 299 | Reset not possible, there is more than one fiscal year | Space: object requires documentation | |
268 | 300 | Company code &1 was reset (terminal &2) | Space: object requires documentation | |
269 | 301 | Account &3-&1 is not a balance sheet account | Space: object requires documentation | |
270 | 302 | Account &3-&1 not allowed to be P&L account | Space: object requires documentation | |
271 | 303 | Account cannot have open item management | ||
272 | 304 | Account changed to reconciliation account for Asset Accounting | ||
273 | 305 | Account &3-&1 not allowed to be balance sheet account | Space: object requires documentation | |
274 | 306 | Account &3-&1 not defined as P&L account | Space: object requires documentation | |
275 | 307 | Please enter a company code. | ||
276 | 308 | Account &1 not yet defined as reconciliation account in company code &3 | Space: object requires documentation | |
277 | 309 | Account &3-&1 not allowed to be defined as reconciliation account | Space: object requires documentation | |
278 | 310 | When you save, simulation version & will be deleted | ||
279 | 311 | Simulation version is marked for deletion | ||
280 | 312 | You cannot make changes (simulation version & deleted) | ||
281 | 313 | Wrong key for new simulation version | ||
282 | 315 | When you save, row in simulation version & will be deleted | ||
283 | 316 | Enter a depreciation area | ||
284 | 317 | Complete generic entry made for asset class | ||
285 | 318 | The entry for the depreciation key was completely masked | ||
286 | 319 | Enter a validity date (TO date) | ||
287 | 320 | Enter a validity date (FROM date) | ||
288 | 321 | Correct your date specifications | ||
289 | 322 | Incorrect generic entry for asset class | ||
290 | 323 | New version & does not have line information nor a substitution | ||
291 | 324 | Area & is not an investment support area | ||
292 | 325 | Enter a defined user name | ||
293 | 326 | Company code & is not in test mode | ||
294 | 327 | When you save, check specifications will be deleted | ||
295 | 328 | No company codes have been defined in your system | ||
296 | 332 | Enter a defined investment support key | ||
297 | 333 | Investment support key has no check specifications | ||
298 | 334 | Current key and the key to be copied are identical | ||
299 | 335 | Document type & not allowed here (Use F4 to see document types allowed) | ||
300 | 336 | Document type & not allowed here (Use F4 to see document types allowed) | ||
301 | 337 | Depreciation area(s) deleted | ||
302 | 338 | Document type & is not defined (Use F4 to see the document types allowed) | ||
303 | 339 | No area exists for investment support in chart of depreciation & | ||
304 | 340 | Enter different document (see long text) | Space: object requires documentation | |
305 | 342 | Identical dep. terms not possible in chart of depreciation &4 | ||
306 | 343 | Changing the use of half periods has consequences | ||
307 | 344 | Changing the use of half periods is no longer possible in co.code & | Space: object requires documentation | |
308 | 345 | Company code & cannot be set to production mode | ||
309 | 346 | Company code & set to production status | ||
310 | 347 | Variant &1 has a different fiscal year than variant &2 | ||
311 | 348 | Impossible to delete company code | ||
312 | 349 | SYST: Error during insert T090Z | ||
313 | 351 | Depreciation key & not defined | ||
314 | 352 | Depreciation area & is not defined | ||
315 | 353 | Simulation version & was deleted | ||
316 | 354 | Enter acquisition year | ||
317 | 355 | Enter useful life | ||
318 | 357 | Area &1 for value takeover in ch.of dep. &3 is managed in forgn currency | ||
319 | 358 | There is an error in the specifications for area &1 in ch.of dep. &3 | ||
320 | 359 | There is an error in the specifications for area &1 in ch.of dep. &3 | ||
321 | 361 | Cutoff value key & is already defined | ||
322 | 362 | Cutoff value key & is not defined | ||
323 | 367 | No valid transaction type group is assigned to transaction type & | ||
324 | 372 | The source and target company code are the same | ||
325 | 373 | Company code & is not defined | ||
326 | 374 | Company code & is not defined | ||
327 | 376 | Company code & is already defined in Asset Accounting | ||
328 | 377 | Company code & is not defined in Asset Accounting | ||
329 | 378 | You did not enter a source or a target company code | ||
330 | 379 | Company code & is not fully defined for Asset Accounting | ||
331 | 381 | Chart of accounts & is not defined | ||
332 | 383 | Consolidation transaction type &V1& is not defined | ||
333 | 384 | Posted depreciation was reset in company code &1 (terminal &2) | Space: object requires documentation | |
334 | 385 | There is an error in the specifications for area &1 in ch.of dep. &2 | ||
335 | 386 | Automatic posting control was changed | ||
336 | 387 | Select accounts | ||
337 | 388 | Account blocked. You cannot change in the reconciliation account. | ||
338 | 391 | There is an error in the specifications for area &1 in co. code &2 | ||
339 | 394 | Complete the indexing entries | ||
340 | 395 | Do not change objects in the SAP name range | ||
341 | 396 | Company code & is live in Financial Accounting | ||
342 | 398 | Company code & is not defined | ||
343 | 399 | You did not enter a fiscal year | ||
344 | 400 | Import: Depreciation area &1 was deleted in client &3, company code &2! | Space: object requires documentation | |
345 | 409 | No maintenance level necessary for screen selection 'NO' | ||
346 | 410 | Specify maintenance level | ||
347 | 411 | No copying possible for screen selection 'NO'. Please correct | ||
348 | 415 | Deletion not possible. Screen layout rule &1 used in asset class &2 | ||
349 | 416 | Deletion not possible. Screen layout &1 used in class &2 cht. of dep. &3 | ||
350 | 420 | You are changing over to the display mode. Screen layout rules not saved | ||
351 | 421 | The unit of measure is being adapted (-> Help) | ||
352 | 422 | A derived depreciation area cannot become a real area | ||
353 | 424 | Depreciation area &1 is already closed for the year &2. | ||
354 | 425 | Round either net book value or depreciation only | ||
355 | 426 | Save your specifications first | ||
356 | 427 | Syst: No chart of depreciation entered | ||
357 | 428 | Asset class cannot be processed (help -> F1) | ||
358 | 430 | No depreciation areas were selected | ||
359 | 431 | Depreciation area &1 is not defined in chart of depreciation &2 | ||
360 | 432 | You are not allowed to increase to a later fiscal year | ||
361 | 433 | You also have to change the close of depreciation area & | ||
362 | 434 | Deletion not allowed | ||
363 | 435 | CoCd &1, area &2: inconsistent rounding entries were corrected | Space: object requires documentation | |
364 | 438 | Transaction type & not allowed here - correct your entry | ||
365 | 439 | Account should only be able to be posted automatically | ||
366 | 440 | Posting to affiliated companies permits one selection only | ||
367 | 441 | The fiscal year requested is before the year of archiving | ||
368 | 442 | The closed fiscal year in company code &1 was reset to &2 | ||
369 | 443 | The closed fiscal year was reset to &1 in area &2 of company code &3 | ||
370 | 444 | You cannot set the closed fiscal year &1 in area &2 | ||
371 | 445 | CAUTION: You MUST read the long text for this message (-> Help). | ||
372 | 446 | The fiscal year variant was not entered for company code &. | ||
373 | 447 | No asset class was selected | ||
374 | 448 | Company code & is not defined as organizational unit | ||
375 | 450 | The validity period expressed in periods has to be between 0 and 12 | ||
376 | 451 | Retirement posting allows only one selection | ||
377 | 456 | Depreciation area & is not defined | ||
378 | 457 | You cannot delete area &1 because of investment support measure &2 | Space: object requires documentation | |
379 | 458 | Changeover key needs the same depreciation type | ||
380 | 459 | Variant &1 has a different fiscal year than variant &2 | ||
381 | 460 | In transaction '&1' no entries possible with transaction type group &2 | ||
382 | 461 | Value for G/L account '&1' also entered in account '&2' | ||
383 | 462 | Value of G/L account '&1' overwrites value '&2' of account '&3' | ||
384 | 463 | There is a separate maint. transaction for account assgnmt in area & | ||
385 | 464 | No changes can be made to area & here (no asset values in general ledger) | ||
386 | 465 | Area &1 does not allow &2 | ||
387 | 466 | Trans.type &1: The entered trans.type &2 does not exist | ||
388 | 467 | Trans.type &1: The entered trans.type &2 not allowed for 'offset. entry' | ||
389 | 468 | Trans.type &1: Trans.type &2 entered for 'Acquis. same year' not allowed | ||
390 | 469 | Co.code &1, area &2: Half periods only allowed with variant w/ 12 periods | ||
391 | 470 | Area &1 in chart of depreciation &2 was deleted by user &3 | ||
392 | 471 | Deletion not possible. (Rule &1 exists in asset &2, subno. &3, co.cd. &4) | ||
393 | 472 | Language key & is not defined | ||
394 | 473 | Asset history sheet version & is not defined | ||
395 | 474 | Asset history sheet group & is not defined | ||
396 | 475 | Maximum base value is not defined | ||
397 | 476 | You can no longer change the value '&' for the G/L account | ||
398 | 477 | Group asset & does not exist | ||
399 | 478 | Enter a group asset and index series | ||
400 | 479 | A real depreciation area is not allowed to become a derived area | ||
401 | 480 | Inconsistency between FI company code &1 and chart of deprec. &2 | ||
402 | 481 | Inconsistency between FI company code &1 and chart of deprec. &2 | ||
403 | 482 | Depreciation area 00 is not allowed in insurance type &1 | ||
404 | 483 | Entry is ignored, since currency does not have decimals | Space: object requires documentation | |
405 | 484 | Inconsistency between company code &1 and chart of deprec. &2 | ||
406 | 485 | Inconsistency between company code &1 and chart of deprec. &2 | ||
407 | 486 | Inconsistency between FI company code &1 and chart of deprec. &2 | ||
408 | 487 | Inconsistency between company code &1 and chart of deprec. &2 | ||
409 | 488 | You cannot change the currency type in chart of deprec. & | ||
410 | 489 | Values already exist in chart of deprec. &1 in company code &2 | ||
411 | 490 | It is not possible to delete the data for chart of dep. & | ||
412 | 491 | The key for rule &1 is in the SAP name range | Space: object requires documentation | |
413 | 492 | Rules that are in the SAP name range cannot be deleted | Space: object requires documentation | |
414 | 493 | Rule &1 is not allowed as an alternative rule for this bus. transaction | Space: object requires documentation | |
415 | 494 | You must maintain the day and month | Space: object requires documentation | |
416 | 495 | The date entered for business transaction &1 is not valid | Space: object requires documentation | |
417 | 496 | Customizing inconsistency (contact your system administrator) | ||
418 | 497 | Contact your system administrator (table error) | ||
419 | 498 | Customizing inconsistency (contact your system administrator) | ||
420 | 499 | Rule &1 is not allowed as primary rule for this acctng transaction | Space: object requires documentation | |
421 | 500 | There is no chart of depreciation defined | ||
422 | 501 | Chart of depreciation &1 not defined or only allowed to be copied | Space: object requires documentation | |
423 | 502 | System error - Contact your system administrator | ||
424 | 503 | System error - Contact your system administrator | ||
425 | 504 | Company code & does not have a valid fiscal year variant | ||
426 | 505 | Fiscal year variant & is not defined | ||
427 | 506 | You cannot take back the chart of depreciation (any longer) | ||
428 | 507 | You cannot process company code &, it contains assets | ||
429 | 508 | You did not enter a chart of depreciation | ||
430 | 509 | Calculation key & is not defined | ||
431 | 510 | There are no entries for the derived depreciation area | ||
432 | 511 | The positive/negative sign could not be determined automatically | ||
433 | 512 | Call error in function module RULES_DETERMINE | ||
434 | 513 | Call error in function module 'RULES_DETERMINE' | ||
435 | 514 | You cannot delete chart of depreciation & | ||
436 | 515 | There are no company codes defined yet in Asset Accounting | ||
437 | 516 | There are no company codes defined yet for chart of depreciation & | ||
438 | 517 | You cannot delete chart of depreciation & | ||
439 | 518 | The period entered is larger than the number of posting periods | ||
440 | 519 | Company code & is not defined | ||
441 | 520 | Depreciation key &1 is not defined in chart of depreciation &2 | ||
442 | 521 | You cannot delete asset class &. See long text for reason. | ||
443 | 522 | Period distribution is not completely defined | ||
444 | 523 | Domain & not defined in the dictionary | ||
445 | 524 | Domain value &1 not defined for domain &2 | ||
446 | 525 | Program error: Incorrect chart of depreciation specified | ||
447 | 526 | Depreciation area &1 in ch.of dep. &2 not defined | ||
448 | 527 | Depreciation area &1 in ch.of dep. &2 is a derived area | ||
449 | 528 | Depreciation area &1 in ch.of dep. &2 does not adopt values | Space: object requires documentation | |
450 | 529 | Transfer of dep. terms is not allowed to area &1 of ch.of dep. &3 | ||
451 | 530 | Deprec. area &1 in ch.of dep. &3 is not set for gross transfer posting | ||
452 | 531 | Fiscal year variants in co.code &3 have inconsistent start date | ||
453 | 532 | Fiscal year variants in co.code &3 have inconsistent start date | ||
454 | 533 | Company code &1: No fiscal year variants specified for G/L | Space: object requires documentation | |
455 | 534 | Enter deprec. areas in chart of deprec. &1 without any gaps | ||
456 | 535 | & &: The depreciation area is derived from only one real area. | Space: object requires documentation | |
457 | 536 | Depreciation area &1 in ch. of dep. &3 is not defined | ||
458 | 537 | Depreciation area &1 in ch.of dep. &3 is not a real depreciation area | ||
459 | 538 | Program error: Entry incomplete when calling function module | ||
460 | 539 | Company code & not defined in Asset Accounting | ||
461 | 540 | Company code & not assigned to a chart of depreciation | ||
462 | 541 | Depreciation area &V1& is not defined | ||
463 | 542 | Program RAVCLUST was called with the wrong transaction | ||
464 | 543 | Asset group/asset number & is not defined | ||
465 | 544 | Indicator 'Area for reporting only' in ch.of dep. &2 is incorrect | ||
466 | 545 | No assest classes are defined | ||
467 | 546 | Program error: Entry incomplete when calling function module | ||
468 | 547 | Consistency check for TABWA resulted in error | ||
469 | 548 | Program error: Entry incomplete when calling function module | ||
470 | 549 | System error: Update from funct. mod. AA_T093B_ABGJA_SET unsuccessful | ||
471 | 550 | Consistency check for & resulted in error | ||
472 | 551 | Company code entries for & are incomplete - See long text | ||
473 | 552 | Ch.of dep. &2: Depreciation area &1 has incorrect posting control | ||
474 | 553 | Ch.of dep. &2: Depreciation area &1 has incorrect posting control | ||
475 | 554 | Ch.of dep. &2: Depreciation area &1 has incorrect posting control | ||
476 | 555 | Ch.of dep. &2: Depreciation area &1 has incorrect posting control | ||
477 | 556 | Chart of depreciation &1 has no entries in table &2 | ||
478 | 557 | The depreciation area is not defined for account assignment | ||
479 | 558 | Depreciation area & will be changed for parallel currencies | ||
480 | 559 | Parallel currency depreciation area & is not defined correctly | ||
481 | 560 | Parallel currencies are not possible (see long text) | ||
482 | 561 | Company code & is live, this function is not possible | ||
483 | 562 | There are no more entries open in T093U for company code & | ||
484 | 563 | Evaluation group & is not defined | ||
485 | 564 | There are no entries in Asset Accounting for country & | ||
486 | 565 | Error found during consistency check for TABWU | ||
487 | 566 | Company code &1 does not have any entries in table &2 | ||
488 | 567 | Transaction type group &2 does not exist in transaction type &1 | Space: object requires documentation | |
489 | 568 | Deprec. area &1 in chart of deprec. &3 is not a real deprec. area | ||
490 | 569 | You can only enter a modification area in derived depreciation areas | Space: object requires documentation | |
491 | 570 | The modification area for area & is entered incorrectly | ||
492 | 571 | Call parameters for FIAA_NBV_SHOW are not complete | ||
493 | 572 | The asset does not manage dep. area & | ||
494 | 573 | Asset value date has to be in fiscal year open to posting | Space: object requires documentation | |
495 | 574 | Depreciation area & is defined as a derived area | ||
496 | 575 | Evaluation group & is not defined | ||
497 | 576 | Environmental protection indicator & is not defined | ||
498 | 577 | Contact your system administrator (table error) | Space: object requires documentation | |
499 | 578 | Contact your system administrator (table error) | Space: object requires documentation | |
500 | 579 | The account determination is not allowed | Space: object requires documentation | |
501 | 580 | You cannot change account determination &1 in asset class &2 | ||
502 | 581 | You cannot delete account determination &1 | Space: object requires documentation | |
503 | 582 | You cannot delete account determination &1 | Space: object requires documentation | |
504 | 583 | Revaluation measure &1 was not found | Space: object requires documentation | |
505 | 584 | 'Post gross acquisition' is not possible | ||
506 | 585 | Fiscal year variant &2 is not different in company code &1 | ||
507 | 586 | Error occurred while determining asset value date | Space: object requires documentation | |
508 | 587 | Posting date and asset value date are in different fiscal years | Space: object requires documentation | |
509 | 588 | Error occurred while determining asset value date | Space: object requires documentation | |
510 | 589 | Incorrect index class used in index series &1 | Space: object requires documentation | |
511 | 590 | You must enter an alternative rule | Space: object requires documentation | |
512 | 591 | Rule &1 cannot be deleted | Space: object requires documentation | |
513 | 592 | Changes have to be saved first | Space: object requires documentation | |
514 | 593 | You cannot reset the closed fiscal year | Space: object requires documentation | |
515 | 594 | The key of variant &1 is in the SAP name range | Space: object requires documentation | |
516 | 595 | The 'SAP_DEFAULT' variant cannot be deleted | Space: object requires documentation | |
517 | 596 | Variant &1 cannot be deleted since it is assigned to co.code &2 | Space: object requires documentation | |
518 | 597 | Location & & is not defined | Space: object requires documentation | |
519 | 598 | Line item schema & is not defined | Space: object requires documentation | |
520 | 599 | Special G/L indicator &1 is not defined for account type &2 | Space: object requires documentation | |
521 | 600 | Entries with no APC account selection are deleted | Space: object requires documentation | |
522 | 601 | Chart of accounts &1 is not assigned to an asset company code | Space: object requires documentation | |
523 | 602 | Number range interval &1 overlaps with &2 | Space: object requires documentation | |
524 | 603 | The lower limit of interval &1 is larger than the upper limit | Space: object requires documentation | |
525 | 604 | Consolidation transaction type &1 in transaction type &2 does not exist | Space: object requires documentation | |
526 | 605 | Alternative rule &1 will be deleted | Space: object requires documentation | |
527 | 606 | Company code &1 is not in test mode | Space: object requires documentation | |
528 | 607 | You cannot change currency &, since posted assets already exist | Space: object requires documentation | |
529 | 608 | Enter an allowed index class (1, 2, 3 or 4). | Space: object requires documentation | |
530 | 609 | You are not allowed to delete all screen layout rules | Space: object requires documentation | |
531 | 610 | There is no screen layout rule for the asset depreciation areas | Space: object requires documentation | |
532 | 611 | The chart of accounts is not assigned to a co.code for number assignmt | Space: object requires documentation | |
533 | 612 | Error in the definition of number range interval in co.code &1 | Space: object requires documentation | |
534 | 613 | Assets were already created from investment measures | Space: object requires documentation | |
535 | 614 | Errors occurred during generating | Space: object requires documentation | |
536 | 615 | The objects were created successfully | Space: object requires documentation | |
537 | 616 | No entry exists for transfer variant &1 relationship &2 dep. area &3 | Space: object requires documentation | |
538 | 617 | Enter the country currency | Space: object requires documentation | |
539 | 618 | Table & is locked. No generation took place. | Space: object requires documentation | |
540 | 619 | Table & is locked. No generation took place. | Space: object requires documentation | |
541 | 620 | Cross-system depreciation area &1 cannot be deleted | Space: object requires documentation | |
542 | 621 | Cross-system dep. area &1 is already assigned to dep. area &2 | Space: object requires documentation | |
543 | 622 | No line item schema is defined : &1 , &2 , &3 | Space: object requires documentation | |
544 | 623 | You cannot delete depreciation area & | Space: object requires documentation | |
545 | 624 | Line item schema & must remain 'active' | Space: object requires documentation | |
546 | 625 | Line item schema & is not active | Space: object requires documentation | |
547 | 626 | No entries were found. | Space: object requires documentation | |
548 | 627 | No entries were found. Choose accounts. | Space: object requires documentation | |
549 | 628 | You used account determination & more than once. | Space: object requires documentation | |
550 | 629 | Data was successfully reset. | Space: object requires documentation | |
551 | 630 | Maintain scrn layout rule for dep.area &1 + asset class &2 or deactiv. it | Space: object requires documentation | |
552 | 631 | Deprec. area &1 was changed and deactivated. Please check. | Space: object requires documentation | |
553 | 632 | Error while updating the number range interval | Space: object requires documentation | |
554 | 633 | Number range intervals are blocked by user &. | Space: object requires documentation | |
555 | 634 | Customizing: Depreciation area &1 not in company code currency &3 | Space: object requires documentation | |
556 | 635 | Transfer variant &1 &2 &3: Method &4 retmt TTY has no revenue indic. | Space: object requires documentation | |
557 | 636 | Transfer variant &1 &2 &3: Method &4 retmt TTY not allowed | Space: object requires documentation | |
558 | 637 | Transfer variant &1 &2 &3: Method &4 acquis. TTY is not transfer TTY | Space: object requires documentation | |
559 | 638 | Transfer variant &1 &2 &3: Method &4 acquis. TTY is not allowed | Space: object requires documentation | |
560 | 639 | Transfer variant &1 &2 &3: Retirement transaction type not compatible | Space: object requires documentation | |
561 | 640 | There are no accounts in this interval in chart of accounts &1 | Space: object requires documentation | |
562 | 641 | Variant &1 &2: Transer method incompatible w/depr. area &3 &4 | Space: object requires documentation | |
563 | 642 | Variant & &: Retirement TTY incompatible w/depr. area & & | Space: object requires documentation | |
564 | 643 | Variant & &: Acquis. TTY incompatible w/depreciation area & & | Space: object requires documentation | |
565 | 644 | Internal error: TA1TVB &1z incompatible with Import_parameters &2&3 | Space: object requires documentation | |
566 | 645 | Cross-system depreciation area * is not allowed. | Space: object requires documentation | |
567 | 646 | & &: Takeover of values from deprec. area & is not possible. | Space: object requires documentation | |
568 | 647 | Variant & &: Depr. area & & - no entry exists | Space: object requires documentation | |
569 | 648 | Inconsistencies in TA1TVB: Entries & & & without transfer variant | Space: object requires documentation | |
570 | 649 | Allowed entries are not maintained for transfer variant &1 | Space: object requires documentation | |
571 | 650 | Day and month missing for 'free date' in currency translation method & | Space: object requires documentation | |
572 | 651 | Transfer variant &1 is not defined | Space: object requires documentation | |
573 | 652 | Depreciation posting rules are not defined in company code &1 | Space: object requires documentation | |
574 | 653 | Deprec. posting rules are not defined for area &1 in company code &2 | Space: object requires documentation | |
575 | 654 | Tab layout &1 cannot be deleted, since it is assigned to asset class &2 | Space: object requires documentation | |
576 | 655 | First enter a generally valid tab layout. | Space: object requires documentation | |
577 | 656 | Production company codes already exist. | Space: object requires documentation | |
578 | 657 | Customizing inconsistency: Chart of depreciation & | Space: object requires documentation | |
579 | 658 | Investment support &2: Support dep. area & cannot be deleted | Space: object requires documentation | |
580 | 659 | You cannot change, create or delete SAP line item schema &1 | Space: object requires documentation | |
581 | 660 | Line item schema &1 is still used in country &2 | Space: object requires documentation | |
582 | 661 | Currency type &1 is already assigned to depreciation area &2 | Space: object requires documentation | |
583 | 662 | Using the currency type 'company code currency' is not allowed. | Space: object requires documentation | |
584 | 663 | Number range intervals are not transported ! | Space: object requires documentation | |
585 | 664 | Fiscal year variant &2 in depreciation area &1 is not different | Space: object requires documentation | |
586 | 665 | Entering this area is not allowed, the entry is reset | Space: object requires documentation | |
587 | 666 | Parallel depreciation area &1 added in chart of dep. &2 | Space: object requires documentation | |
588 | 667 | Transaction type &1: parallel depreciation area &2 is missing | Space: object requires documentation | |
589 | 668 | Index series &1 has incorrect index class | Space: object requires documentation | |
590 | 669 | Areas &1 and &3 use different fiscal year variants | Space: object requires documentation | |
591 | 670 | Cross-system depreciation area &1 does not exist | Space: object requires documentation | |
592 | 671 | Area &1: currency type &2 is not defined in Financial Accounting | The short text describes the object sufficiently | |
593 | 673 | Consolidation trans. type is suppressed in fld status variant &1 group &2 | Space: object requires documentation | |
594 | 674 | There are already assets for investment support measure &1 | Space: object requires documentation | |
595 | 675 | Shutdown is ignored when you use "complete depreciation" | Space: object requires documentation | |
596 | 676 | No longer possible to change 'depreciation to the day' indicator | Space: object requires documentation | |
597 | 677 | Company code &1 cannot be processed (investment projects!) | Space: object requires documentation | |
598 | 678 | & Area &: No entry for period for posting to the general ledger | Space: object requires documentation | |
599 | 679 | Caution: Reporting for the past is no longer possible! | Space: object requires documentation | |
600 | 680 | Changed depreciation terms are not adopted automatically | Space: object requires documentation | |
601 | 681 | The system automatically modified asset class depreciation terms | Space: object requires documentation | |
602 | 682 | You want to transfer deprec. area &1 in company code &2 more than once. | Space: object requires documentation | |
603 | 683 | Area &1 will be deleted in other systems at the asset level! | Space: object requires documentation | |
604 | 684 | You cannot create transaction type &1 manually. | Space: object requires documentation | |
605 | 685 | Depreciation key &1 in chart of deprec. &2 is not defined | Space: object requires documentation | |
606 | 686 | Declining-balance method &1 in chart of deprec. &2 is not defined | Space: object requires documentation | |
607 | 687 | Period control &1 in chart of deprec. &2 is not defined | Space: object requires documentation | |
608 | 688 | Base method &1 is not defined | Space: object requires documentation | |
609 | 689 | Level &1 is not defined in chart of depreciation &2 | Space: object requires documentation | |
610 | 690 | Special retirement treatment is not defined | Space: object requires documentation | |
611 | 691 | Depreciation area &1 in company code &2 does not have default values | Space: object requires documentation | |
612 | 692 | Company code &1 does not have default values | Space: object requires documentation | |
613 | 693 | Maximum amount method &1 is not defined on &2 | Space: object requires documentation | |
614 | 694 | Maximum amount method & is not defined | Space: object requires documentation | |
615 | 695 | There are no phases for depreciation key &1 in ch.of deprec. &2 | Space: object requires documentation | |
616 | 696 | Depreciation key &1 in ch. of depreciation &2 not set to active | Space: object requires documentation | |
617 | 697 | Creating depreciation area & is not allowed, and it was deleted | Space: object requires documentation | |
618 | 698 | Asset class &1 cannot be deleted, see long text for reason | Space: object requires documentation | |
619 | 699 | Company code &1: area &2 has to manage group assets | Space: object requires documentation | |
620 | 700 | ****** Error message from transaction takeover postings ***************** | ||
621 | 701 | Posting not possible, debit total is not equal to credit total | ||
622 | 702 | You cannot post to account & in period & & | ||
623 | 703 | Takeover postings not allowed (company code no longer in status '1') | ||
624 | 704 | Posting not possible (last closed fiscal year is smaller than posting yr) | ||
625 | 705 | Company code & is not defined for Asset Accounting | ||
626 | 706 | Check entry, company code & does not exist | ||
627 | 707 | Transaction & not possible (Inform System Specialist) | ||
628 | 708 | Check posting key (posting key & is not defined) | ||
629 | 709 | Posting will take place in past fiscal year | ||
630 | 710 | Transaction key & not defined in Financial Accounting. Please create | ||
631 | 711 | Always enter account and amount | ||
632 | 712 | Check entry (account & is not permitted here) | ||
633 | 713 | Enter business area - business area balance sheet is active | ||
634 | 714 | Company code &1: area &2 has to manage group assets | Space: object requires documentation | |
635 | 715 | Company code &1: Group asset &3 manages dep. area &2 | Space: object requires documentation | |
636 | 716 | Inv. support &1: Dependent area &2 for area &3 is missing | Space: object requires documentation | |
637 | 717 | Dependent areas are determined and added | Space: object requires documentation | |
638 | 718 | There are no dependent areas for value transfer for entry &1 | Space: object requires documentation | |
639 | 719 | There are no sample transaction types for investment support measures | Space: object requires documentation | |
640 | 720 | There is no sample transaction for revaluation | Space: object requires documentation | |
641 | 721 | Revaluation &1: Dependent dep. area &2 is missing for area &3 | Space: object requires documentation | |
642 | 722 | Program &1 was executed successfully | Space: object requires documentation | |
643 | 723 | Area &1 is still used as target area in revaluation measure &2 | Space: object requires documentation | |
644 | 730 | Number range &1 in co.code &2 for doc.type &3 must be defined as internal | Space: object requires documentation | |
645 | 731 | Doc.type &1 for dep.posting in co.code &2 should not be for batch input | Space: object requires documentation | |
646 | 740 | All settings made up to now will be lost | Space: object requires documentation | |
647 | 741 | Asset class &1 is used more than once | Space: object requires documentation | |
648 | 742 | Objects from last wizard run were not yet generated | Space: object requires documentation | |
649 | 750 | &1: There is no phase 1 yet for depreciation key &2 ! | Space: object requires documentation | |
650 | 760 | Closed fiscal years cannot be reset | Space: object requires documentation | |
651 | 761 | Transaction types &1 and &2 have different document types | Space: object requires documentation | |
652 | 762 | Transfer variant &1 &2: do not mix TTY for prior-yr + curr.yr (&3 und &4) | Space: object requires documentation | |
653 | 763 | Trans. type &1 does not have a trans.type for retirement curr.yr acquis. | Space: object requires documentation | |
654 | 764 | None or both TTYs should be for retirement of curr-yr acquis. (&1 and &2) | Space: object requires documentation | |
655 | 765 | Transaction types &1 and &2: maintain "Deactivate asset" indicator | Space: object requires documentation | |
656 | 766 | Transaction type &1 does not have affiliated company indicator | Space: object requires documentation | |
657 | 767 | Transaction types &1 and &2 have different affiliated company indicators | Space: object requires documentation | |
658 | 768 | Transaction type &1: affiliated company indicator not allowed | Space: object requires documentation | |
659 | 780 | Deleting a key in the SAP name range is not allowed | The short text describes the object sufficiently | |
660 | 781 | It is not possible to delete asset &1 (contract accounting doc. exists) | Space: object requires documentation | |
661 | 782 | It is not possible to delete asset &1 (requests exist) | Space: object requires documentation | |
662 | 801 | Customizing settings archived | ||
663 | 802 | CoCd &1: fiscal year variants for depreciation areas are incompatible | Space: object requires documentation | |
664 | 803 | New General Ledger Accounting is not active in company code &1 | The short text describes the object sufficiently | |
665 | 804 | Function &1 no longer supported; use &2 (see long text) | Space: object requires documentation | |
666 | 806 | Transaction code &1 not possible; see long text | Space: object requires documentation | |
667 | 811 | Chart of dep. &2: no area in company code &1 for parallel currency &2 | Space: object requires documentation | |
668 | 850 | Base areas for depreciation area &1 have different currency types | The short text describes the object sufficiently | |
669 | 860 | Area &1 is not a real area | The short text describes the object sufficiently | |
670 | 899 | & | ||
671 | 900 | & | Space: object requires documentation |
History
Last changed on/by | 20131127 | SAP | |
SAP Release Created in |