Data Element list used by SAP ABAP Table CHV_CLASS_DATA (Data for the class of inspection charcteristic values)
SAP ABAP Table CHV_CLASS_DATA (Data for the class of inspection charcteristic values) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
1 | Data Element | AENNR | Change Number | |
2 | Data Element | AENNR | Change Number | |
3 | Data Element | ANDAT | Date Record Created on | |
4 | Data Element | ANNAM | User Who Created Record | |
5 | Data Element | CHA_LOCK | Inspection Characteristic Is Locked | |
6 | Data Element | CIM_COUNT | Internal counter | |
7 | Data Element | CIM_DATE | Valid-from date | |
8 | Data Element | DATUB | Valid-to date | |
9 | Data Element | DATUB | Valid-to date | |
10 | Data Element | DATUV | Valid-From Date | |
11 | Data Element | DATUV | Valid-From Date | |
12 | Data Element | DZKRIZ | Counter for additional criteria | |
13 | Data Element | EKUNN | Account number of customer | |
14 | Data Element | ELIFN | Vendor's account number | |
15 | Data Element | FHMNR | Production resource/tool number | |
16 | Data Element | HANDLE | Internal ID of an object | |
17 | Data Element | LKENZ | Deletion Indicator | |
18 | Data Element | MAKTX | Material description | |
19 | Data Element | MANDT | Client | |
20 | Data Element | NAME1_GP | Name 1 | |
21 | Data Element | NAME1_GP | Name 1 | |
22 | Data Element | OPRID | Operation ID | |
23 | Data Element | OPR_HER | Origin of an operation | |
24 | Data Element | OPR_REFID | Operation ID of the referenced operation | |
25 | Data Element | PARKZ | Indicator: inactive changes | |
26 | Data Element | PLNAL | Group Counter | |
27 | Data Element | PLNFOLGE | Sequence | |
28 | Data Element | PLNKN | Number of the task list node | |
29 | Data Element | PLNNR | Key for Task List Group | |
30 | Data Element | PLNTY | Task List Type | |
31 | Data Element | PSNFH | Item Number for Production Resource/Tool | |
32 | Data Element | QADDPRO | Sample Quantity Is Added | |
33 | Data Element | QAENDERER | Name of User who Most Recently Changed the Data Record | |
34 | Data Element | QAUSSLOS | Characteristic Relevant for Qual. Score and Scrap Share | |
35 | Data Element | QBFHLZHL | Recording the Number of Defects | |
36 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
37 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
38 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
39 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
40 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
41 | Data Element | QCODEGRPO | Defect Code Group for Rejection at Upper Tolerance | |
42 | Data Element | QCODEGRPU | Defect Code Group for Rejection at Lower Tolerance | |
43 | Data Element | QCODEO | Defect Code for Rejection at Upper Specification Limit | |
44 | Data Element | QCODEU | Defect Code for Rejection at Lower Specification Limit | |
45 | Data Element | QDATUMAEND | Date on Which Data Record Was Changed | |
46 | Data Element | QDOKUKZ | Documentation Required for Inspection Results | |
47 | Data Element | QDRUCK1 | ||
48 | Data Element | QESTUKZ | Recording Type | |
49 | Data Element | QFEHLREC | Defects Recording Automatically Called Up | |
50 | Data Element | QGRENZOB1 | First Upper Specification Limit | |
51 | Data Element | QGRENZOB2 | Second Upper Specification Limit | |
52 | Data Element | QGRENZUN1 | First Lower Specification Limit | |
53 | Data Element | QGRENZUN2 | Second Lower Specification Limit | |
54 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
55 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
56 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
57 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
58 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
59 | Data Element | QKLASSBR | Class Width | |
60 | Data Element | QKLASSMIT | Class Midpoint | |
61 | Data Element | QKLASSZAHL | Number of Value Classes for Inspection Results | |
62 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
63 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
64 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
65 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
66 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
67 | Data Element | QKZAENBEL | Create Change Documents During Results Recording | |
68 | Data Element | QKZDESTROY | Destructive Inspection | |
69 | Data Element | QKZEINSTMK | Characteristic Type | |
70 | Data Element | QKZFORMEL | Calculated Characteristic | |
71 | Data Element | QKZPKAT | Reference to Characteristic Attribute Required | |
72 | Data Element | QKZPROCCHAR | Process Characteristic | |
73 | Data Element | QKZQUMK | Measured Values Must Be Recorded | |
74 | Data Element | QKZQUNMK | Quantitative Characteristic | |
75 | Data Element | QKZSOLLPR | Check Target Value | |
76 | Data Element | QKZTOLOB | Upper Specification Limit | |
77 | Data Element | QKZTOLUN | Lower Specification Limit | |
78 | Data Element | QKZ_MS_REF | Reference for Standard Specifications | |
79 | Data Element | QKZ_REF | Reference to Master Insp. Characteristic in Task List | |
80 | Data Element | QLEITSTKZ | Control Characteristics Results - QM Subsystem | |
81 | Data Element | QLZEITKZ | Long-Term Inspection | |
82 | Data Element | QMASSEH | Unit of Measurement, in Which Quantitative Data Is Stored | |
83 | Data Element | QMATNR_D | Material Number of the Dependent Characteristic Specs | |
84 | Data Element | QMERKNR | Master Inspection Characteristics | |
85 | Data Element | QMERKNRP | Inspection Characteristic Number | |
86 | Data Element | QNAENDKZ | Default Control Indicators Cannot Be Changed | |
87 | Data Element | QNINITIAL | Value Not Initial if Set | |
88 | Data Element | QNINITIAL | Value Not Initial if Set | |
89 | Data Element | QNINITIAL | Value Not Initial if Set | |
90 | Data Element | QNINITIAL | Value Not Initial if Set | |
91 | Data Element | QNINITIAL | Value Not Initial if Set | |
92 | Data Element | QNINITIAL | Value Not Initial if Set | |
93 | Data Element | QNINITIAL | Value Not Initial if Set | |
94 | Data Element | QNINITIAL | Value Not Initial if Set | |
95 | Data Element | QNINITIAL | Value Not Initial if Set | |
96 | Data Element | QNINITIAL | Value Not Initial if Set | |
97 | Data Element | QNINITIAL | Value Not Initial if Set | |
98 | Data Element | QNINITIAL | Value Not Initial if Set | |
99 | Data Element | QNINITIAL | Value Not Initial if Set | |
100 | Data Element | QPARA | Control Indicator "Parameter Characteristic" Set/Not Set | |
101 | Data Element | QPLAUSIOB | Upper Plausibility Limit | |
102 | Data Element | QPLAUSIUN | Lower Plausibility Limit | |
103 | Data Element | QPMZWANG | Assignment of Test Equipment Required | |
104 | Data Element | QPUMFKZ | Inspection Scope | |
105 | Data Element | QPZLFH | Assigned Test Equipment | |
106 | Data Element | QRZWANG | Characteristic Category | |
107 | Data Element | QSOLLWERTE | Target Value for a Quantitative Characteristic | |
108 | Data Element | QSPCMK | SPC Characteristic | |
109 | Data Element | QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
110 | Data Element | QSTICHPR | Sampling Procedure is Required | |
111 | Data Element | QSUCHFELD | Search Field for Customer-Specific Task List Selection | |
112 | Data Element | QSYNCRO | Synchronization is Active | |
113 | Data Element | QTOLERANZ | Tolerance Key | |
114 | Data Element | QTOLOB | Upper Specification Limit | |
115 | Data Element | QTOLUN | Lower Tolerance Limit | |
116 | Data Element | QTOLWOB | Change to Upper Specification Limit | |
117 | Data Element | QTOLWUN | Change to Lower Specification Limit | |
118 | Data Element | QTXT10 | Text Line for Additional Information | |
119 | Data Element | QTXT20 | Text Line for Additional Information | |
120 | Data Element | QTXT40 | Text Line for Additional Information | |
121 | Data Element | QTXT_CHA | Short Text for Inspection Characteristic | |
122 | Data Element | QVERSDAT | Key Date for Version Selection | |
123 | Data Element | QVERSDAT | Key Date for Version Selection | |
124 | Data Element | QVERSDAT | Key Date for Version Selection | |
125 | Data Element | QVERSDAT | Key Date for Version Selection | |
126 | Data Element | QVERSDAT | Key Date for Version Selection | |
127 | Data Element | QVERSNR | Version Number | |
128 | Data Element | QVERSNR | Version Number | |
129 | Data Element | QVERSNR | Version Number | |
130 | Data Element | QVERSNR | Version Number | |
131 | Data Element | QVERSNR | Version Number | |
132 | Data Element | QVERSNR | Version Number | |
133 | Data Element | QVERSNR | Version Number | |
134 | Data Element | QVORGAEND | Specifications Can Be Changed | |
135 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
136 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
137 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
138 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
139 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
140 | Data Element | QZUORDNR | Number for Dependent Characteristic Specifications | |
141 | Data Element | Q_MS_OBJECT | Object for Multiple Specifications | |
142 | Data Element | Q_MS_OBJTYPE | Type of Object for Multiple Specifications | |
143 | Data Element | TECHV | Technical status from | |
144 | Data Element | TXTZ1 | First line of text for production resources/tools | |
145 | Data Element | VORNR | Operation/Activity Number | |
146 | Data Element | VPLNAL | Group counter of the referenced task list | |
147 | Data Element | VPLNNR | Group of the referenced task list | |
148 | Data Element | VPLNTY | Type of the referenced task list | |
149 | Data Element | WERKS_D | Plant |