SAP ABAP Table CPS_TASK_LIST_MAINT_CHV (Maint. Task List: Inspection Characteristic Values)

Hierarchy

☛ BBPCRM (Software Component) BBPCRM
   ⤷ CRM (Application Component) Customer Relationship Management
     ⤷ CRM_APPLICATION (Package) All CRM Components Without Special Structure Packages
       ⤷ CP (Package) R/3 Application development: PP Task Lists

Basic Data

Table Category	INTTAB	Structure
Structure	CPS_TASK_LIST_MAINT_CHV	Table Relationship Diagram
Short Description	Maint. Task List: Inspection Characteristic Values

Delivery and Maintenance

Pool/cluster
Delivery Class
Data Browser/Table View Maintenance	Display/Maintenance Allowed with Restrictions

Components

	Field	Key	Data Element	Domain	Data Type	Length	Decimal Places	Short Description	Check table
1	MAINTAIN_MODE	☐	CP_TASK_LIST_MAINT_MODE	CP_TASK_LIST_MAINT_MODE	CHAR	1	0	Maint. Task List: Mode
2	FLAG_BAR_POINTER	☐	CP_TASK_LIST_MAINT_POINTER		NUMC	10	0	Maint. Task List: Pointer of Checkbox Structure
3	SEQUENCE_NO	☐	PLNFOLGE	PLNFOLGE	CHAR	6	0	Sequence
4	ACTIVITY	☐	VORNR	VORNR	CHAR	4	0	Operation/Activity Number
5	OPERATION_ID	☐	OPRID	CHAR8	CHAR	8	0	Operation ID
6	INSPCHAR	☐	QMERKNRP	QMERKNRP	NUMC	4	0	Inspection Characteristic Number
7	NO_OF_SPEC_VALUE	☐	QZUORDNR	QZUORDNR	NUMC	4	0	Number for Dependent Characteristic Specifications
8	MATERIAL	☐	MATNR	MATNR	CHAR	18	0	Material Number	*
9	PLANT	☐	WERKS_D	WERKS	CHAR	4	0	Plant	*
10	VENDOR	☐	ELIFN	LIFNR	CHAR	10	0	Vendor's account number	*
11	CUSTOMER	☐	EKUNN	KUNNR	CHAR	10	0	Account number of customer	*
12	SEARCH_FIELD	☐	QSUCHFELD	CHAR20	CHAR	20	0	Search Field for Customer-Specific Task List Selection
13	ITEM_NO_OF_PRODUCTION_RESOURCE	☐	PSNFH	PSNFH	NUMC	4	0	Item Number for Production Resource/Tool
14	DEC_PLACES	☐	QSTELLEN	QSTELLEN	INT1	3	0	Number of Places to the Right of a Decimal Point (Accuracy)
15	MEAS_UNIT	☐	QMASSEH	MEINS	UNIT	3	0	Unit of Measurement, in Which Quantitative Data Is Stored	*
16	MEAS_UNIT_ISO	☐	ISOCD_UNIT	ISOCD_UNIT	CHAR	3	0	ISO code for unit of measurement	*
17	TARGET_VAL	☐	QSOLLWERTC	QSOLLWERTC	CHAR	16	0	Target Value for a Quantitative Characteristic
18	TARGET_VAL_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
19	LW_TOL_LMT	☐	QTOLUNC	QSOLLWERTC	CHAR	16	0	Lower Specification Limit
20	LW_TOL_LMT_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
21	UP_TOL_LMT	☐	QTOLOBC	QSOLLWERTC	CHAR	16	0	Upper Specification Limit
22	UP_TOL_LMT_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
23	NO_OF_VALUE_CLASSES	☐	QKLASSZAHL	QKLASSZAHL	INT1	3	0	Number of Value Classes for Inspection Results
24	CLASS_WIDTH	☐	QKLASSBRC	QSOLLWERTC	CHAR	16	0	Class Width
25	CLASS_WIDTH_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
26	CLASS_MIDPOINT	☐	QKLASMITC	QSOLLWERTC	CHAR	16	0	Class Midpoint
27	CLASS_MIDPOINT_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
28	UP_LMT_1	☐	QGRENZO1C	QSOLLWERTC	CHAR	16	0	First Upper Specification Limit
29	UP_LMT_1_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
30	LW_LMT_1	☐	QGRENZU1C	QSOLLWERTC	CHAR	16	0	First Lower Specification Limit
31	LW_LMT_1_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
32	UP_LMT_2	☐	QGRENZO2C	QSOLLWERTC	CHAR	16	0	Second Upper Specification Limit
33	UP_LMT_2_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
34	LW_LMT_2	☐	QGRENZU2C	QSOLLWERTC	CHAR	16	0	Second Lower Specification Limit
35	LW_LMT_2_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
36	UP_PLS_LMT	☐	QPLAUSIOBC	QSOLLWERTC	CHAR	16	0	Upper Plausibility Limit
37	UP_PLS_LMT_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
38	LW_PLS_LMT	☐	QPLAUSIUNC	QSOLLWERTC	CHAR	16	0	Lower Plausibility Limit
39	LW_PLS_LMT_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
40	UP_NEW_LMT	☐	QTOLWOBC	QSOLLWERTC	CHAR	16	0	Change to Upper Specification Limit
41	UP_NEW_LMT_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
42	LW_NEW_LMT	☐	QTOLWUNC	QSOLLWERTC	CHAR	16	0	Change to Lower Specification Limit
43	LW_NEW_LMT_NI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
44	DAT_UP_NEW_LMT	☐	QTOLWAB_C	CHAR10	CHAR	10	0	Date, from Which the Tolerance Change Is Valid (Batch Input)
45	DAT_LW_NEW_LMT	☐	QTOLWBIS_C	CHAR10	CHAR	10	0	Date, to Which the Tolerance Change Is Valid (Batch Input)
46	IND_SELSET_OR_CODEGRP1	☐	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
47	CAT_TYPE1	☐	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
48	SEL_SET1	☐	QCGRAUSW	QCGRAUSW	CHAR	8	0	Assigned Code Group or Selected Set
49	PSEL_SET1	☐	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
50	IND_SELSET_OR_CODEGRP2	☐	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
51	CAT_TYPE2	☐	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
52	CODE_GROUP2	☐	QCODEGR	QCGRAUSW	CHAR	8	0	Assigned Code Group
53	PSEL_SET2	☐	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
54	IND_SELSET_OR_CODEGRP3	☐	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
55	CAT_TYPE3	☐	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
56	CODE_GROUP3	☐	QCODEGR	QCGRAUSW	CHAR	8	0	Assigned Code Group
57	PSEL_SET3	☐	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
58	IND_SELSET_OR_CODEGRP4	☐	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
59	CAT_TYPE4	☐	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
60	CODE_GROUP4	☐	QCODEGR	QCGRAUSW	CHAR	8	0	Assigned Code Group
61	PSEL_SET4	☐	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
62	IND_SELSET_OR_CODEGRP5	☐	QKTTAB	QKTTAB	CHAR	1	0	Catalog Entry Is a Selected Set
63	CAT_TYPE5	☐	QKATAUSW	QKATART	CHAR	1	0	Catalog Type of Assigned Code Group or Selected Set	*
64	CODE_GROUP5	☐	QCODEGR	QCGRAUSW	CHAR	8	0	Assigned Code Group
65	PSEL_SET5	☐	QWERKAUSW	WERKS	CHAR	4	0	Plant of the Assigned Selected Set	*
66	MS_OBJECT	☐	Q_MS_OBJECT	Q_MS_OBJECT	CHAR	30	0	Object for Multiple Specifications
67	MS_OBJTYPE	☐	Q_MS_OBJTYPE	Q_MS_OBJTYPE	CHAR	2	0	Type of Object for Multiple Specifications	*
68	MS_REF	☐	QKZ_MS_REF	QKZ	CHAR	1	0	Reference for Standard Specifications

History

Last changed by/on	SAP	20130529
SAP Release Created in	605