Data Element list used by SAP ABAP Table QPMKV (Logical data base QMM (QPMK and QPMT and QPMZ))
SAP ABAP Table 
QPMKV (Logical data base QMM (QPMK and QPMT and QPMZ)) is using
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Data Element |
ATINN | Internal characteristic | |
| 2 | Data Element |
DATUV | Valid-From Date | |
| 3 | Data Element |
MANDT | Client | |
| 4 | Data Element |
QAENDERER | Name of User who Most Recently Changed the Data Record | |
| 5 | Data Element |
QASDR_SDR_ACTIVE | Active Indicator for Specification Determination Rule | |
| 6 | Data Element |
QASDR_SDR_PARAMETER | Parameters for Specification Determination | |
| 7 | Data Element |
QASDR_SDR_PARAMETER | Parameters for Specification Determination | |
| 8 | Data Element |
QASDR_SPEC_DET_RULE | Specification Determination Rule | |
| 9 | Data Element |
QCGRAUSW1 | First Assigned Code Group or Selected Set | |
| 10 | Data Element |
QCGRAUSW2 | Second Assigned Code Group or Selected Set | |
| 11 | Data Element |
QCGRAUSW3 | Third Assigned Code Group or Selected Set | |
| 12 | Data Element |
QCGRAUSW4 | Fourth Assigned Code Group or Selected Set | |
| 13 | Data Element |
QCGRAUSW5 | Fifth Assigned Code Group or Selected Set | |
| 14 | Data Element |
QCHARACT_ID1 | Characteristic Description for Quality Data Exchange | |
| 15 | Data Element |
QCODEGRPO | Defect Code Group for Rejection at Upper Tolerance | |
| 16 | Data Element |
QCODEGRPQL | Defect Code Group for General Rejection | |
| 17 | Data Element |
QCODEGRPU | Defect Code Group for Rejection at Lower Tolerance | |
| 18 | Data Element |
QCODEO | Defect Code for Rejection at Upper Specification Limit | |
| 19 | Data Element |
QCODEQL | Defect Code for Rejection: General | |
| 20 | Data Element |
QCODEU | Defect Code for Rejection at Lower Specification Limit | |
| 21 | Data Element |
QDATUMAEND | Date on Which Data Record Was Changed | |
| 22 | Data Element |
QDATUMERST | Date on Which the Data Record Was Created | |
| 23 | Data Element |
QEANTVERF | Fraction Calculation | |
| 24 | Data Element |
QERSTELLER | Name of User Who Created the Data Record | |
| 25 | Data Element |
QGELOESCHT | Data Record Was Deleted | |
| 26 | Data Element |
QGRENZOB1 | First Upper Specification Limit | |
| 27 | Data Element |
QGRENZOB2 | Second Upper Specification Limit | |
| 28 | Data Element |
QGRENZUN1 | First Lower Specification Limit | |
| 29 | Data Element |
QGRENZUN2 | Second Lower Specification Limit | |
| 30 | Data Element |
QINPPROC | Parameters for Input Processing in QM Results Recording | |
| 31 | Data Element |
QKATAUSW1 | Catalog Type 1 for the Characteristic Attributes | |
| 32 | Data Element |
QKATAUSW2 | Catalog Type of the Second Assigned Catalog Entry | |
| 33 | Data Element |
QKATAUSW3 | Catalog Type of the Third Assigned Catalog Entry | |
| 34 | Data Element |
QKATAUSW4 | Catalog Type of the Fourth Assigned Catalog Entry | |
| 35 | Data Element |
QKATAUSW5 | Catalog Type of the Fifth Assigned Catalog Entry | |
| 36 | Data Element |
QKLASSBR | Class Width | |
| 37 | Data Element |
QKLASSMIT | Class Midpoint | |
| 38 | Data Element |
QKLASSZAHL | Number of Value Classes for Inspection Results | |
| 39 | Data Element |
QKTTAB1 | Catalog Entry 1 Is a Selected Set | |
| 40 | Data Element |
QKTTAB2 | Catalog Entry 2 Is a Selected Set | |
| 41 | Data Element |
QKTTAB3 | Catalog Entry 3 Is a Selected Set | |
| 42 | Data Element |
QKTTAB4 | Catalog Entry 4 Is a Selected Set | |
| 43 | Data Element |
QKTTAB5 | Catalog Entry 5 Is a Selected Set | |
| 44 | Data Element |
QKURZTEXT | Short Text | |
| 45 | Data Element |
QLOESCHKZ | Status of Master Record | |
| 46 | Data Element |
QLTEXTEKZ | Long Text for Physical-Sample Drawing of a Characteristic | |
| 47 | Data Element |
QLTEXTMK | Long Text Exists for the Characteristic | |
| 48 | Data Element |
QMASSEH | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 49 | Data Element |
QMASTAUTH | Authorization Group QM Basic Data | |
| 50 | Data Element |
QMERKGEW | Weighting of the Characteristic | |
| 51 | Data Element |
QMERKNR | Master Inspection Characteristics | |
| 52 | Data Element |
QMKCONTROL | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
| 53 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 54 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 55 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 56 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 57 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 58 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 59 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 60 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 61 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 62 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 63 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 64 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 65 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 66 | Data Element |
QPLAUSIOB | Upper Plausibility Limit | |
| 67 | Data Element |
QPLAUSIUN | Lower Plausibility Limit | |
| 68 | Data Element |
QPMETHODE | Inspection Method | |
| 69 | Data Element |
QPOSNR | Position of a method for a char. within a list of methods | |
| 70 | Data Element |
QPRQUALIF | Inspector Qualification | |
| 71 | Data Element |
QSOLLWERTE | Target Value for a Quantitative Characteristic | |
| 72 | Data Element |
QSORTFELD | Search Field | |
| 73 | Data Element |
QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 74 | Data Element |
QTOLERANZ | Tolerance Key | |
| 75 | Data Element |
QTOLOB | Upper Specification Limit | |
| 76 | Data Element |
QTOLUN | Lower Tolerance Limit | |
| 77 | Data Element |
QTOLWAB | Date from Which the Tolerance Change Is Valid | |
| 78 | Data Element |
QTOLWBIS | Date Until Which the Tolerance Change Is Valid | |
| 79 | Data Element |
QTOLWOB | Change to Upper Specification Limit | |
| 80 | Data Element |
QTOLWUN | Change to Lower Specification Limit | |
| 81 | Data Element |
QTXT10 | Text Line for Additional Information | |
| 82 | Data Element |
QTXT20 | Text Line for Additional Information | |
| 83 | Data Element |
QTXT40 | Text Line for Additional Information | |
| 84 | Data Element |
QVERSNR | Version Number | |
| 85 | Data Element |
QVERSNR | Version Number | |
| 86 | Data Element |
QVERSNR | Version Number | |
| 87 | Data Element |
QVERSNR1 | Version Number of the First Assigned Entry | |
| 88 | Data Element |
QVERSNR2 | Version Number of the Second Assigned Entry | |
| 89 | Data Element |
QVERSNR3 | Version Number of the Third Assigned Entry | |
| 90 | Data Element |
QVERSNR4 | Version Number of the Fourth Assigned Entry | |
| 91 | Data Element |
QVERSNR5 | Version Number of the Fifth Assigned Entry | |
| 92 | Data Element |
QVERSNRMK | Version Number of the Master Inspection Characteristic | |
| 93 | Data Element |
QVERW | Data Record is Being Used | |
| 94 | Data Element |
QVOLLST | Copy Model/Reference Characteristic | |
| 95 | Data Element |
QWERKAUSW1 | Plant of the First Assigned Selected Set | |
| 96 | Data Element |
QWERKAUSW2 | Plant of the Second Assigned Selected Set | |
| 97 | Data Element |
QWERKAUSW3 | Plant of the Third Assigned Selected Set | |
| 98 | Data Element |
QWERKAUSW4 | Plant of the Fourth Assigned Selected Set | |
| 99 | Data Element |
QWERKAUSW5 | Plant of the Fifth Assigned Selected Set | |
| 100 | Data Element |
QWERKPMT | Plant of the Inspection Method | |
| 101 | Data Element |
QZAEHLER | Plant for the Master Inspection Characteristic | |
| 102 | Data Element |
SPRAS | Language Key | |
| 103 | Data Element |
WERKS_D | Plant |
