Data Element list used by SAP ABAP Table RPLM_TS_QI_INSP_CHARACTERISTIC (RPLM QI - Information for Inspection Characteristic - Result)
SAP ABAP Table 
RPLM_TS_QI_INSP_CHARACTERISTIC (RPLM QI - Information for Inspection Characteristic - Result) is using
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Data Element |
BOOLE_D | Data element for domain BOOLE: TRUE (='X') and FALSE (=' ') | |
| 2 | Data Element |
QANZFEHEH4 | Number of Nonconforming Sample Units | |
| 3 | Data Element |
QANZFEHL4 | Number of Defects Found | |
| 4 | Data Element |
QANZWERTG2 | Number of Inspected Sample Units | |
| 5 | Data Element |
QATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
| 6 | Data Element |
QBEASTATUS | Results Record Status | |
| 7 | Data Element |
QBEWERTUNG | Code Valuation | |
| 8 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 9 | Data Element |
QCH_WGT_TX | Text for Characteristic Weighting | |
| 10 | Data Element |
QCODE | Code | |
| 11 | Data Element |
QCODE_GROU | Code Group | |
| 12 | Data Element |
QDOKPMETHODE | Document for Inspection Method Available | |
| 13 | Data Element |
QEIFABSCHL | Close Characteristic or Sample | |
| 14 | Data Element |
QEIFAWRTO | Number of Values Above the Tolerance Limit (Characteristic) | |
| 15 | Data Element |
QEIFAWRTU | Number of Values Below the Tolerance Limit (Characteristic) | |
| 16 | Data Element |
QEIFMTBWRK | Plant for Inspection Method | |
| 17 | Data Element |
QEIFPRDATB | Inspection End Date (QM Subsystem Interface) | |
| 18 | Data Element |
QEIFPRDATV | Inspection Start Date (QM Subsystem Interface) | |
| 19 | Data Element |
QEIFPRZTB | Inspection End Time (QM Subsystem Interface) | |
| 20 | Data Element |
QEIFPRZTV | Inspection Start Time (QM Subsystem Interface) | |
| 21 | Data Element |
QERGDATH | Origin of Results Data | |
| 22 | Data Element |
QGESUMF | Sample Size that Has to Be Inspected for a Characteristic | |
| 23 | Data Element |
QGESUMF | Sample Size that Has to Be Inspected for a Characteristic | |
| 24 | Data Element |
QIBPMERKNR | Insp. Lot Charac. No. | |
| 25 | Data Element |
QINSPECTOR | Name of the Inspector | |
| 26 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 27 | Data Element |
QKTEXTAM | Short Description of the Selected Set | |
| 28 | Data Element |
QKTEXTGR | Code Group Description | |
| 29 | Data Element |
QKTTAB | Catalog Entry Is a Selected Set | |
| 30 | Data Element |
QKURZTEXT | Short Text | |
| 31 | Data Element |
QKURZTEXT | Short Text | |
| 32 | Data Element |
QKZFORMEL | Calculated Characteristic | |
| 33 | Data Element |
QLWTOL_LMT | Lower Tolerance Limit | |
| 34 | Data Element |
QMASCHINE | General Information | |
| 35 | Data Element |
QMBEWERTG | Inspection Result Valuation | |
| 36 | Data Element |
QMEAN_VAL | Mean Value | |
| 37 | Data Element |
QMERKNR | Master Inspection Characteristics | |
| 38 | Data Element |
QMITTELWRT | Arithmetic Mean of Valid Measured Values | |
| 39 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 40 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 41 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 42 | Data Element |
QPMETHODE | Inspection Method | |
| 43 | Data Element |
QQRKCPC | Process Capability Index (cp) | |
| 44 | Data Element |
QQRKCPKC | Process Capability Index (cpk) | |
| 45 | Data Element |
QQRKNR | Control Chart Number | |
| 46 | Data Element |
QRUECKNR | Confirmation Number for Inspection Characteristic | |
| 47 | Data Element |
QSOLLWERTE | Target Value for a Quantitative Characteristic | |
| 48 | Data Element |
QSTDAW | Standard Deviation of Valid Measured Values | |
| 49 | Data Element |
QSTDAWC | Standard Deviation of Valid Measured Values | |
| 50 | Data Element |
QTARGET_VA | Target Value | |
| 51 | Data Element |
QTOLGRENZE | Specifications Display | |
| 52 | Data Element |
QTOLOB | Upper Specification Limit | |
| 53 | Data Element |
QTOLUN | Lower Tolerance Limit | |
| 54 | Data Element |
QTXT10 | Text Line for Additional Information | |
| 55 | Data Element |
QTXT20 | Text Line for Additional Information | |
| 56 | Data Element |
QTXT40 | Text Line for Additional Information | |
| 57 | Data Element |
QTXTCATALG | Short Text for the Catalog | |
| 58 | Data Element |
QTXT_CHA | Short Text for Inspection Characteristic | |
| 59 | Data Element |
QTXT_CODE | Short Text for Code | |
| 60 | Data Element |
QUPTOL_LMT | Upper Tolerance Limit | |
| 61 | Data Element |
QVERSNRMK | Version Number of the Master Inspection Characteristic | |
| 62 | Data Element |
QVERSNRPM | Version Number of the Inspection Method | |
| 63 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 64 | Data Element |
QZAEHLER | Plant for the Master Inspection Characteristic | |
| 65 | Data Element |
VAL_TEXT | Short Text for Fixed Values |
