Data Element list used by SAP ABAP Table QCSPEC (Certificates: Characteristic specifications)
SAP ABAP Table 
QCSPEC (Certificates: Characteristic specifications) is using
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Data Element |
ATCOD | Code for value dependency | |
| 2 | Data Element |
CHARG_D | Batch Number | |
| 3 | Data Element |
MATNR | Material Number | |
| 4 | Data Element |
MSEHI | Unit of Measurement | |
| 5 | Data Element |
QANNAHMEZ | Acceptance Number | |
| 6 | Data Element |
QAUSSLOS | Characteristic Relevant for Qual. Score and Scrap Share | |
| 7 | Data Element |
QBFHLZHL | Recording the Number of Defects | |
| 8 | Data Element |
QCGRAUSW | Assigned Code Group or Selected Set | |
| 9 | Data Element |
QDOKUKZ | Documentation Required for Inspection Results | |
| 10 | Data Element |
QESTUKZ | Recording Type | |
| 11 | Data Element |
QFEHLREC | Defects Recording Automatically Called Up | |
| 12 | Data Element |
QGESUMF | Sample Size that Has to Be Inspected for a Characteristic | |
| 13 | Data Element |
QGRENZO1C | First Upper Specification Limit | |
| 14 | Data Element |
QGRENZO2C | Second Upper Specification Limit | |
| 15 | Data Element |
QGRENZU1C | First Lower Specification Limit | |
| 16 | Data Element |
QGRENZU2C | Second Lower Specification Limit | |
| 17 | Data Element |
QHPZ | 100% Inspection | |
| 18 | Data Element |
QKFAKTORC | K-Factor for a Variable Inspection | |
| 19 | Data Element |
QKURZTEXT | Short Text | |
| 20 | Data Element |
QKZAENBEL | Create Change Documents During Results Recording | |
| 21 | Data Element |
QKZATTRFE | Attributive Inspection by Nonconforming Units | |
| 22 | Data Element |
QKZATTRFZ | Attributive Inspection by Number of Defects | |
| 23 | Data Element |
QKZCOD | Valuation by Code | |
| 24 | Data Element |
QKZDESTROY | Destructive Inspection | |
| 25 | Data Element |
QKZFORMEL | Calculated Characteristic | |
| 26 | Data Element |
QKZKNULL | Inspection Against Specification Limits (k = 0) | |
| 27 | Data Element |
QKZMAN | Manual Valuation | |
| 28 | Data Element |
QKZPKAT | Reference to Characteristic Attribute Required | |
| 29 | Data Element |
QKZQUMK | Measured Values Must Be Recorded | |
| 30 | Data Element |
QKZQUNMK | Quantitative Characteristic | |
| 31 | Data Element |
QKZTOLOB | Upper Specification Limit | |
| 32 | Data Element |
QKZTOLUN | Lower Specification Limit | |
| 33 | Data Element |
QKZUMFS | Multiple Samples | |
| 34 | Data Element |
QKZVARS | Variable Inspection by S-Method | |
| 35 | Data Element |
QLFNKN | Current Node Number from Order Counter APLZL | |
| 36 | Data Element |
QLTEXTMT | Long Text Exists for the Inspection Method | |
| 37 | Data Element |
QLZEITKZ | Long-Term Inspection | |
| 38 | Data Element |
QMERKGEW | Weighting of the Characteristic | |
| 39 | Data Element |
QMERKNR | Master Inspection Characteristics | |
| 40 | Data Element |
QMKKURZTXT | Short Text for the Inspection Characteristic | |
| 41 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 42 | Data Element |
QPHYSPROBE | Number of the Partial Sample | |
| 43 | Data Element |
QPLAUSIOBC | Upper Plausibility Limit | |
| 44 | Data Element |
QPLAUSIUNC | Lower Plausibility Limit | |
| 45 | Data Element |
QPLOS | Inspection Lot Number | |
| 46 | Data Element |
QPMETHODE | Inspection Method | |
| 47 | Data Element |
QPROBEMGEH | Base Unit of Measure for the Sample Unit | |
| 48 | Data Element |
QPRUEFUMF | Quantity to Be Inspected | |
| 49 | Data Element |
QPUMFKZ | Inspection Scope | |
| 50 | Data Element |
QRUECKWEZ | Rejection Number | |
| 51 | Data Element |
QRZWANG | Characteristic Category | |
| 52 | Data Element |
QSOLLWERTC | Target Value for a Quantitative Characteristic | |
| 53 | Data Element |
QSTATUS | Specification Record Status | |
| 54 | Data Element |
QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 55 | Data Element |
QSTICHPR | Sampling Procedure is Required | |
| 56 | Data Element |
QSTICHVERF | Sampling Procedure in Inspection Characteristic | |
| 57 | Data Element |
QSYNCRO | Synchronization is Active | |
| 58 | Data Element |
QTLOS | Partial lot number | |
| 59 | Data Element |
QTOLERWKZ | Tolerance Change Is Active | |
| 60 | Data Element |
QTOLOB | Upper Specification Limit | |
| 61 | Data Element |
QTOLOBC | Upper Specification Limit | |
| 62 | Data Element |
QTOLUN | Lower Tolerance Limit | |
| 63 | Data Element |
QTOLUNC | Lower Specification Limit | |
| 64 | Data Element |
QTXT10 | Text Line for Additional Information | |
| 65 | Data Element |
QTXT20 | Text Line for Additional Information | |
| 66 | Data Element |
QTXT40 | Text Line for Additional Information | |
| 67 | Data Element |
QTXTCATALG | Short Text for the Catalog | |
| 68 | Data Element |
QTXTMETHOD | Short Text for Inspection Method | |
| 69 | Data Element |
QTXTSMPPRO | Short Text for the Sampling Procedure | |
| 70 | Data Element |
QTXT_GROUP | Short Text for the Code Group/Selected Set | |
| 71 | Data Element |
QVERSNRMK | Version Number of the Master Inspection Characteristic | |
| 72 | Data Element |
QVERSNRPM | Version Number of the Inspection Method | |
| 73 | Data Element |
QWERKAUSW | Plant of the Assigned Selected Set | |
| 74 | Data Element |
QWERKS | Plant | |
| 75 | Data Element |
WERKS_D | Plant |
