Data Element list used by SAP ABAP Table QAMV (Characteristic specifications for inspection processing)
SAP ABAP Table QAMV (Characteristic specifications for inspection processing) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
1 | Data Element | ATINN | Internal characteristic | |
2 | Data Element | CIM_COUNT | Internal counter | |
3 | Data Element | MANDT | Client | |
4 | Data Element | QABW_CODES | Deviating Valuation of Codes | |
5 | Data Element | QAENDERER | Name of User who Most Recently Changed the Data Record | |
6 | Data Element | QAKTPPKT | Use of Unplanned Characteristics (Inspection Pt. Processing) | |
7 | Data Element | QANTEILKZ | Take Share Estimate into Account | |
8 | Data Element | QBEWERT | Valuation Rule | |
9 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
10 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
11 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
12 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
13 | Data Element | QCGRAUSW | Assigned Code Group or Selected Set | |
14 | Data Element | QCHARACT_ID1 | Characteristic Description for Quality Data Exchange | |
15 | Data Element | QCODEGRPO | Defect Code Group for Rejection at Upper Tolerance | |
16 | Data Element | QCODEGRPQL | Defect Code Group for General Rejection | |
17 | Data Element | QCODEGRPU | Defect Code Group for Rejection at Lower Tolerance | |
18 | Data Element | QCODEO | Defect Code for Rejection at Upper Specification Limit | |
19 | Data Element | QCODEQL | Defect Code for Rejection: General | |
20 | Data Element | QCODEU | Defect Code for Rejection at Lower Specification Limit | |
21 | Data Element | QDATUMAEND | Date on Which Data Record Was Changed | |
22 | Data Element | QDATUMERST | Date on Which the Data Record Was Created | |
23 | Data Element | QDYNREGEL | Dynamic Modification Rule | |
24 | Data Element | QDYNSTRING | String for Dynamic Modification Criteria (Database Relevant) | |
25 | Data Element | QDYNTIME | Time of Dynamic Modification in Inspection Lot | |
26 | Data Element | QEANTVERF | Fraction Calculation | |
27 | Data Element | QERGDATHPL | Planned Results Data Origin | |
28 | Data Element | QERSTELLER | Name of User Who Created the Data Record | |
29 | Data Element | QFORMEL | Formula Field | |
30 | Data Element | QFORMEL | Formula Field | |
31 | Data Element | QFORMELSL | Check and Calculate Formula in QM | |
32 | Data Element | QGEBEH | Lot Container | |
33 | Data Element | QGESUMF | Sample Size that Has to Be Inspected for a Characteristic | |
34 | Data Element | QGRENZOB1 | First Upper Specification Limit | |
35 | Data Element | QGRENZOB2 | Second Upper Specification Limit | |
36 | Data Element | QGRENZUN1 | First Lower Specification Limit | |
37 | Data Element | QGRENZUN2 | Second Lower Specification Limit | |
38 | Data Element | QHPZ | 100% Inspection | |
39 | Data Element | QINPPROC | Parameters for Input Processing in QM Results Recording | |
40 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
41 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
42 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
43 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
44 | Data Element | QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
45 | Data Element | QKLASSBR | Class Width | |
46 | Data Element | QKLASSMIT | Class Midpoint | |
47 | Data Element | QKLASSZAHL | Number of Value Classes for Inspection Results | |
48 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
49 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
50 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
51 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
52 | Data Element | QKTTAB | Catalog Entry Is a Selected Set | |
53 | Data Element | QKZDYNR | Dynamic Modification Rule Available | |
54 | Data Element | QKZEINSTMK | Characteristic Type | |
55 | Data Element | QKZPRZIEH | Physical-Sample-Drawing Text Exists | |
56 | Data Element | QKZRAST | Indicator: Sampling Procedure for Inspection Points | |
57 | Data Element | QKZ_REF_EE | Type of Master Insp. Characteristic Ref. Results Recording | |
58 | Data Element | QLFNKN | Current Node Number from Order Counter APLZL | |
59 | Data Element | QLTEXTKZ | Inspection Characteristic Long Text Exists | |
60 | Data Element | QMASSEH | Unit of Measurement, in Which Quantitative Data Is Stored | |
61 | Data Element | QMERKDYN | Characteristic (in Plan) whose Q-Level Will Be Copied | |
62 | Data Element | QMERKGEW | Weighting of the Characteristic | |
63 | Data Element | QMERKNR | Master Inspection Characteristics | |
64 | Data Element | QMERKNRP | Inspection Characteristic Number | |
65 | Data Element | QMKCONTROL | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
66 | Data Element | QMKKURZTXT | Short Text for the Inspection Characteristic | |
67 | Data Element | QNINITIAL | Value Not Initial if Set | |
68 | Data Element | QNINITIAL | Value Not Initial if Set | |
69 | Data Element | QNINITIAL | Value Not Initial if Set | |
70 | Data Element | QNINITIAL | Value Not Initial if Set | |
71 | Data Element | QNINITIAL | Value Not Initial if Set | |
72 | Data Element | QNINITIAL | Value Not Initial if Set | |
73 | Data Element | QNINITIAL | Value Not Initial if Set | |
74 | Data Element | QNINITIAL | Value Not Initial if Set | |
75 | Data Element | QNINITIAL | Value Not Initial if Set | |
76 | Data Element | QNINITIAL | Value Not Initial if Set | |
77 | Data Element | QNINITIAL | Value Not Initial if Set | |
78 | Data Element | QNIPLANMK | Unplanned Characteristic | |
79 | Data Element | QNOINPUT | Results Are Calculated Internally | |
80 | Data Element | QPHYSPROBE | Number of the Partial Sample | |
81 | Data Element | QPKTUNGEMK | Unplanned Characteristic Was Created with this Sample No. | |
82 | Data Element | QPLAUSIOB | Upper Plausibility Limit | |
83 | Data Element | QPLAUSIUN | Lower Plausibility Limit | |
84 | Data Element | QPLOS | Inspection Lot Number | |
85 | Data Element | QPMETHODE | Inspection Method | |
86 | Data Element | QPPANZPRUE | Number of Insp. Point Inspections Without Characteristic | |
87 | Data Element | QPROBEFAK | Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.) | |
88 | Data Element | QPROBEMGEH | Base Unit of Measure for the Sample Unit | |
89 | Data Element | QPROBME | Sample Unit of Measure | |
90 | Data Element | QPROBNRBIS | Highest Partial Sample No. Valid for Instruction | |
91 | Data Element | QPRQUALIF | Inspector Qualification | |
92 | Data Element | QPRUEFUMF | Quantity to Be Inspected | |
93 | Data Element | QPRZIEHVER | Sample-Drawing Procedure | |
94 | Data Element | QPZLFH | Assigned Test Equipment | |
95 | Data Element | QRASTER | Inspection Frequency (Only for Inspection with Insp. Points) | |
96 | Data Element | QRUECKNR | Confirmation Number for Inspection Characteristic | |
97 | Data Element | QSOLLWERTE | Target Value for a Quantitative Characteristic | |
98 | Data Element | QSOSTPANZ | Number of Planned Partial Samples | |
99 | Data Element | QSPCKRIT | SPC Criterion | |
100 | Data Element | QSTATUS | Specification Record Status | |
101 | Data Element | QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
102 | Data Element | QSTICHVERF | Sampling Procedure in Inspection Characteristic | |
103 | Data Element | QTOLERWKZ | Tolerance Change Is Active | |
104 | Data Element | QTOLOB | Upper Specification Limit | |
105 | Data Element | QTOLUN | Lower Tolerance Limit | |
106 | Data Element | QTSTICHPRO | Partial Samples Possible | |
107 | Data Element | QTXT10 | Text Line for Additional Information | |
108 | Data Element | QTXT20 | Text Line for Additional Information | |
109 | Data Element | QTXT40 | Text Line for Additional Information | |
110 | Data Element | QUMREN | Factor for Converting MatUnitOfMeasure to SampUnitOfMeasure | |
111 | Data Element | QUMRENPME | Factor for Converting SampUnitOfMeasure to MatUnitOfMeasure | |
112 | Data Element | QVERSDAT | Key Date for Version Selection | |
113 | Data Element | QVERSDAT | Key Date for Version Selection | |
114 | Data Element | QVERSDAT | Key Date for Version Selection | |
115 | Data Element | QVERSDAT | Key Date for Version Selection | |
116 | Data Element | QVERSDAT | Key Date for Version Selection | |
117 | Data Element | QVERSNPRZV | Version No. of the Sample-Drawing Procedure | |
118 | Data Element | QVERSNR | Version Number | |
119 | Data Element | QVERSNR | Version Number | |
120 | Data Element | QVERSNR | Version Number | |
121 | Data Element | QVERSNR | Version Number | |
122 | Data Element | QVERSNR | Version Number | |
123 | Data Element | QVERSNR | Version Number | |
124 | Data Element | QVERSNR | Version Number | |
125 | Data Element | QVERSNRMK | Version Number of the Master Inspection Characteristic | |
126 | Data Element | QVERSNRPM | Version Number of the Inspection Method | |
127 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
128 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
129 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
130 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
131 | Data Element | QWERKAUSW | Plant of the Assigned Selected Set | |
132 | Data Element | QZAEHLER | Plant for the Master Inspection Characteristic | |
133 | Data Element | QZAEHLERQL | Sequential Counter for Different Quality Levels | |
134 | Data Element | QZAEHLPRZV | Item Number in Sample-Drawing Procedure | |
135 | Data Element | SPRAS | Language Key | |
136 | Data Element | SPRAS | Language Key | |
137 | Data Element | WERKS_D | Plant |