Data Element list used by SAP ABAP Table QCRES_PDF (Certificates: Characteristic values for PDF)
SAP ABAP Table QCRES_PDF (Certificates: Characteristic values for PDF) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
1 | Data Element | ATNAM | Characteristic Name | |
2 | Data Element | ATWTB | Characteristic value description | |
3 | Data Element | CHAR10 | Character Field Length = 10 | |
4 | Data Element | CHAR10 | Character Field Length = 10 | |
5 | Data Element | CHAR10 | Character Field Length = 10 | |
6 | Data Element | CHARG_D | Batch Number | |
7 | Data Element | DDTEXT | Explanatory short text | |
8 | Data Element | DDTEXT | Explanatory short text | |
9 | Data Element | EQUNR | Equipment Number | |
10 | Data Element | MATNR | Material Number | |
11 | Data Element | MSEHI | Unit of Measurement | |
12 | Data Element | MSEHL | Unit of Measurement Text (Maximum 30 Characters) | |
13 | Data Element | MSEHT | Unit of Measurement Text (Maximum 10 Characters) | |
14 | Data Element | QANTEILC | Estimated Fraction of Nonconforming Units | |
15 | Data Element | QANTEILOC | Estimated Fraction Above the Tolerance Range | |
16 | Data Element | QANTEILUC | Estimated Fraction Below the Tolerance Range | |
17 | Data Element | QANZFEHEH4 | Number of Nonconforming Sample Units | |
18 | Data Element | QANZFEHL4 | Number of Defects Found | |
19 | Data Element | QANZWERTG4 | Number of Inspected Sample Units | |
20 | Data Element | QANZWERTO4 | Number of Measured Values Above the Tolerance Range | |
21 | Data Element | QANZWERTU4 | Number of Measured Values Below the Tolerance Range | |
22 | Data Element | QATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
23 | Data Element | QAUSSLOS | Characteristic Relevant for Qual. Score and Scrap Share | |
24 | Data Element | QBEASTATUS | Results Record Status | |
25 | Data Element | QBFHLZHL | Recording the Number of Defects | |
26 | Data Element | QCATTRIBUT | Attribute for Results Record (Greater, Smaller,..) | |
27 | Data Element | QCKZSPEC | Relationship of Value to Specifications | |
28 | Data Element | QCODE | Code | |
29 | Data Element | QCODEGRP | Code Group | |
30 | Data Element | QCOUTMVAL | Certificates: Output Field for Mean Value | |
31 | Data Element | QC_VALUE | Value or Part of Value Range on Certificate | |
32 | Data Element | QC_VALUE | Value or Part of Value Range on Certificate | |
33 | Data Element | QDETAILERG | Number of the Individual Result | |
34 | Data Element | QDOKUKZ | Documentation Required for Inspection Results | |
35 | Data Element | QERGDATH | Origin of Results Data | |
36 | Data Element | QESTUKZ | Recording Type | |
37 | Data Element | QFEHLKLAS | Defect class | |
38 | Data Element | QFEHLREC | Defects Recording Automatically Called Up | |
39 | Data Element | QGRPTEXT | Short Text for Code Group | |
40 | Data Element | QIVARIANZC | Internal Dispersion of Valid Measured Values | |
41 | Data Element | QKURZTEXT | Short Text | |
42 | Data Element | QKURZTEXT | Short Text | |
43 | Data Element | QKURZTEXT | Short Text | |
44 | Data Element | QKURZTEXT | Short Text | |
45 | Data Element | QKZAENBEL | Create Change Documents During Results Recording | |
46 | Data Element | QKZDESTROY | Destructive Inspection | |
47 | Data Element | QKZESEL | Level for Result Selection | |
48 | Data Element | QKZFERTPRF | Inspection with Inspection Points | |
49 | Data Element | QKZFORMEL | Calculated Characteristic | |
50 | Data Element | QKZPKAT | Reference to Characteristic Attribute Required | |
51 | Data Element | QKZQUMK | Measured Values Must Be Recorded | |
52 | Data Element | QKZQUNMK | Quantitative Characteristic | |
53 | Data Element | QKZSOLLPR | Check Target Value | |
54 | Data Element | QKZTOLOB | Upper Specification Limit | |
55 | Data Element | QKZTOLUN | Lower Specification Limit | |
56 | Data Element | QLFNKN | Current Node Number from Order Counter APLZL | |
57 | Data Element | QLTEXTKZ | Inspection Characteristic Long Text Exists | |
58 | Data Element | QLZEITKZ | Long-Term Inspection | |
59 | Data Element | QMASCHINE | General Information | |
60 | Data Element | QMAXWERTC | Maximum Value of the Valid Measured Values | |
61 | Data Element | QMBEWERTG | Inspection Result Valuation | |
62 | Data Element | QMERKNR | Master Inspection Characteristics | |
63 | Data Element | QMERKNRP | Inspection Characteristic Number | |
64 | Data Element | QMGEH6 | Measurement Unit in Which Quantitative Data Is Maintained | |
65 | Data Element | QMINWERTC | Minimum Value of the Valid Measured Values | |
66 | Data Element | QMITTEWRTC | Arithmetic Mean of Valid Measured Values | |
67 | Data Element | QMKKURZTXT | Short Text for the Inspection Characteristic | |
68 | Data Element | QMOMENT3C | Third Central Moment of Valid Measured Values | |
69 | Data Element | QMOMENT4C | Fourth Central Moment of Valid Measured Values | |
70 | Data Element | QPHYSPRNR | Physical Sample Number | |
71 | Data Element | QPHYSPROBE | Number of the Partial Sample | |
72 | Data Element | QPLOS | Inspection Lot Number | |
73 | Data Element | QPPKTTYP | Inspection Point Type | |
74 | Data Element | QPPSORTKEY | Key Field (Sort Field) for Inspection Point | |
75 | Data Element | QPROBENR | Sample Number | |
76 | Data Element | QPRPOS | Test Position | |
77 | Data Element | QPRUEFLINR | Single-Unit Number for the Unit to Be Inspected | |
78 | Data Element | QPUMFKZ | Inspection Scope | |
79 | Data Element | QRZWANG | Characteristic Category | |
80 | Data Element | QSLWBEZ | Identification for the Inspection Point Field Combination | |
81 | Data Element | QSPANNWEIC | Range of Valid Measured Values | |
82 | Data Element | QSTDAWC | Standard Deviation of Valid Measured Values | |
83 | Data Element | QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
84 | Data Element | QSTICHPR | Sampling Procedure is Required | |
85 | Data Element | QSTUECKNR | Counter for Inspection Unit Number | |
86 | Data Element | QSYNCRO | Synchronization is Active | |
87 | Data Element | QTLOS | Partial lot number | |
88 | Data Element | QTXT_CODE | Short Text for Code | |
89 | Data Element | QVARIANZC | Dispersion (Variance) of Valid Measured Values | |
90 | Data Element | QVERSNRMK | Version Number of the Master Inspection Characteristic | |
91 | Data Element | QWERKS | Plant | |
92 | Data Element | SPRAS | Language Key | |
93 | Data Element | TPLNR | Functional Location |