Data Element list used by SAP ABAP Table BAPIQPMK_QPMK (BAPI Structure ALE Distribution of Master Insp. Char.)
SAP ABAP Table 
BAPIQPMK_QPMK (BAPI Structure ALE Distribution of Master Insp. Char.) is using
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Data Element |
ATNAM | Characteristic Name | |
| 2 | Data Element |
DATUV | Valid-From Date | |
| 3 | Data Element |
ISOCD_UNIT | ISO code for unit of measurement | |
| 4 | Data Element |
MSGFN | Function | |
| 5 | Data Element |
QAENDERER | Name of User who Most Recently Changed the Data Record | |
| 6 | Data Element |
QASDR_SDR_ACTIVE | Active Indicator for Specification Determination Rule | |
| 7 | Data Element |
QASDR_SDR_PARAMETER | Parameters for Specification Determination | |
| 8 | Data Element |
QASDR_SDR_PARAMETER | Parameters for Specification Determination | |
| 9 | Data Element |
QASDR_SPEC_DET_RULE | Specification Determination Rule | |
| 10 | Data Element |
QCHARACT_ID1 | Characteristic Description for Quality Data Exchange | |
| 11 | Data Element |
QCODEGRPO | Defect Code Group for Rejection at Upper Tolerance | |
| 12 | Data Element |
QCODEGRPQL | Defect Code Group for General Rejection | |
| 13 | Data Element |
QCODEGRPU | Defect Code Group for Rejection at Lower Tolerance | |
| 14 | Data Element |
QCODEO | Defect Code for Rejection at Upper Specification Limit | |
| 15 | Data Element |
QCODEQL | Defect Code for Rejection: General | |
| 16 | Data Element |
QCODEU | Defect Code for Rejection at Lower Specification Limit | |
| 17 | Data Element |
QDATUMAEND | Date on Which Data Record Was Changed | |
| 18 | Data Element |
QDATUMERST | Date on Which the Data Record Was Created | |
| 19 | Data Element |
QEANTVERF | Fraction Calculation | |
| 20 | Data Element |
QERSTELLER | Name of User Who Created the Data Record | |
| 21 | Data Element |
QGRENZOB1 | First Upper Specification Limit | |
| 22 | Data Element |
QGRENZOB2 | Second Upper Specification Limit | |
| 23 | Data Element |
QGRENZUN1 | First Lower Specification Limit | |
| 24 | Data Element |
QGRENZUN2 | Second Lower Specification Limit | |
| 25 | Data Element |
QINPPROC | Parameters for Input Processing in QM Results Recording | |
| 26 | Data Element |
QKLASSBR | Class Width | |
| 27 | Data Element |
QKLASSMIT | Class Midpoint | |
| 28 | Data Element |
QKLASSZAHL | Number of Value Classes for Inspection Results | |
| 29 | Data Element |
QKZKLASS | Class Is Available for Master Record | |
| 30 | Data Element |
QLOESCHKZ | Status of Master Record | |
| 31 | Data Element |
QMASSEH | Unit of Measurement, in Which Quantitative Data Is Stored | |
| 32 | Data Element |
QMASTAUTH | Authorization Group QM Basic Data | |
| 33 | Data Element |
QMERKGEW | Weighting of the Characteristic | |
| 34 | Data Element |
QMERKNR | Master Inspection Characteristics | |
| 35 | Data Element |
QMKCONTROL | Cntrl Indicator String for Insp. Char./Master Insp. Char. | |
| 36 | Data Element |
QNINITIAL01 | Value Not Initial If Set | |
| 37 | Data Element |
QNINITIAL02 | Value Not Initial If Set | |
| 38 | Data Element |
QNINITIAL03 | Value Not Initial If Set | |
| 39 | Data Element |
QNINITIAL04 | Value Not Initial If Set | |
| 40 | Data Element |
QNINITIAL05 | Value Not Initial If Set | |
| 41 | Data Element |
QNINITIAL06 | Value Not Initial If Set | |
| 42 | Data Element |
QNINITIAL07 | Value Not Initial If Set | |
| 43 | Data Element |
QNINITIAL08 | Value Not Initial If Set | |
| 44 | Data Element |
QNINITIAL09 | Value Not Initial If Set | |
| 45 | Data Element |
QNINITIAL10 | Value Not Initial If Set | |
| 46 | Data Element |
QNINITIAL11 | Value Not Initial If Set | |
| 47 | Data Element |
QNINITIAL12 | Value Not Initial if Set | |
| 48 | Data Element |
QNINITIAL13 | Value not initial if set | |
| 49 | Data Element |
QPLAUSIOB | Upper Plausibility Limit | |
| 50 | Data Element |
QPLAUSIUN | Lower Plausibility Limit | |
| 51 | Data Element |
QPRQUALIF | Inspector Qualification | |
| 52 | Data Element |
QSOLLWERTE | Target Value for a Quantitative Characteristic | |
| 53 | Data Element |
QSORTFELD | Search Field | |
| 54 | Data Element |
QSTELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
| 55 | Data Element |
QTOLERANZ | Tolerance Key | |
| 56 | Data Element |
QTOLOB | Upper Specification Limit | |
| 57 | Data Element |
QTOLUN | Lower Tolerance Limit | |
| 58 | Data Element |
QTOLWAB | Date from Which the Tolerance Change Is Valid | |
| 59 | Data Element |
QTOLWBIS | Date Until Which the Tolerance Change Is Valid | |
| 60 | Data Element |
QTOLWOB | Change to Upper Specification Limit | |
| 61 | Data Element |
QTOLWUN | Change to Lower Specification Limit | |
| 62 | Data Element |
QTXT10 | Text Line for Additional Information | |
| 63 | Data Element |
QTXT20 | Text Line for Additional Information | |
| 64 | Data Element |
QTXT40 | Text Line for Additional Information | |
| 65 | Data Element |
QVERSNR | Version Number | |
| 66 | Data Element |
QVERSNR2 | Version Number of the Second Assigned Entry | |
| 67 | Data Element |
QVERSNRMK | Version Number of the Master Inspection Characteristic | |
| 68 | Data Element |
QVERW | Data Record is Being Used | |
| 69 | Data Element |
QVOLLST | Copy Model/Reference Characteristic | |
| 70 | Data Element |
QZAEHLER | Plant for the Master Inspection Characteristic |
