SAP ABAP Table MCQAQRB (Insp. result-sample/charac.: Communication structure)

Hierarchy

☛ SAP_APPL (Software Component) Logistics and Accounting
   ⤷ QM-QC-IS (Application Component) Information System
     ⤷ QG02 (Package) QM quality information system

Basic Data

Table Category	INTTAB	Structure
Structure	MCQAQRB	Table Relationship Diagram
Short Description	Insp. result-sample/charac.: Communication structure

Delivery and Maintenance

Pool/cluster
Delivery Class
Data Browser/Table View Maintenance	Display/Maintenance Allowed with Restrictions

Components

	Field	Key	Data Element	Domain	Data Type	Length	Decimal Places	Short Description	Check table
1	SUPKZ	☐	SUPKZ	SUPKZ	CHAR	1	0	Statistics update indicator (post in/post out)
2	.INCLUDE	☐				0	0	Insp. result-sample/charac.: Communication structure
3	.INCLUDE	☐				0	0	Insp. result-sample/charac.: Summarization characs.
4	PRUEFLOS	☐	QPLOS	QPLOS	NUMC	12	0	Inspection Lot Number	*
5	VORGLFNR	☐	QLFNKN	KNTNR	NUMC	8	0	Current Node Number from Order Counter APLZL
6	MERKNR	☐	QMERKNRP	QMERKNRP	NUMC	4	0	Inspection Characteristic Number
7	PROBENR	☐	QSTIPRONR	QPROBENR	NUMC	6	0	Number of the Partial Sample	*
8	QPMK_REF	☐	QKZ_REF_EE	QKZ_REF_EE	CHAR	1	0	Type of Master Insp. Characteristic Ref. Results Recording
9	QPMK_WERKS	☐	QZAEHLER	QZAEHLER	CHAR	4	0	Plant for the Master Inspection Characteristic
10	VERWMERKM	☐	QMERKNR	QMERKNR	CHAR	8	0	Master Inspection Characteristics	*
11	ERKGEW	☐	QMERKGEW	QMERKKLAS	CHAR	2	0	Weighting of the Characteristic	*
12	STATUSR	☐	QBEASTATUS	QSTATUS	CHAR	1	0	Results Record Status	*
13	MBEWERTG	☐	QMBEWERTG	QEEBEWERTG	CHAR	1	0	Inspection Result Valuation
14	ATTRIBUT	☐	QATTRIBUT	QATTRIBUT	CHAR	1	0	Attribute of the Results Record (Valid, Invalid,...)
15	.INCLUDE	☐				0	0	Insp. result-sample/charac.: Scores
16	ANZFEHLEH	☐	QANZFEHEH4	QANZAHL4	INT4	10	0	Number of Nonconforming Sample Units
17	ANTEILNI	☐	QNIANTEIL	QNOTINI	CHAR	1	0	Not Initialized for Fraction
18	ANTEIL	☐	QANTEIL	QSTATWERT	FLTP	16	16	Estimated Fraction of Nonconforming Sample Units
19	ANZFEHLER	☐	QANZFEHL4	QANZAHL4	INT4	10	0	Number of Defects Found
20	ANZWERTO	☐	QANZWERTO4	QANZAHL4	INT4	10	0	Number of Measured Values Above the Tolerance Range
21	ANZWERTU	☐	QANZWERTU4	QANZAHL4	INT4	10	0	Number of Measured Values Below the Tolerance Range
22	MITTELWNI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
23	MITTELWERT	☐	QMITTELWRT	QSTATWERT	FLTP	16	16	Arithmetic Mean of Valid Measured Values
24	ANTEILO	☐	QANTEILO	QSTATWERT	FLTP	16	16	Estimated Fraction Above the Tolerance Range
25	ANTEILU	☐	QANTEILU	QSTATWERT	FLTP	16	16	Estimated Fraction Below the Tolerance Range
26	STEUERKZ	☐	QMKCONTROL	QMKCONTROL	CHAR	30	0	Cntrl Indicator String for Insp. Char./Master Insp. Char.
27	TSTICHPRKZ	☐	QTSTICHPRO	QKZUMFS	CHAR	1	0	Partial Samples Possible
28	MASSEINHSW	☐	QMASSEH	MEINS	UNIT	3	0	Unit of Measurement, in Which Quantitative Data Is Stored	*
29	ZHLN	☐	QANZWERTG4	QANZAHL4	INT4	10	0	Number of Inspected Sample Units
30	ZHLNA	☐	QZHLNA	QANZAHL4	INT4	10	0	Number of Accepted Samples
31	ZHLNR	☐	QZHLNR	QANZAHL4	INT4	10	0	Number of Rejected Samples
32	ZHLNSKIP	☐	QZHLNSKIP	QANZAHL4	INT4	10	0	Number of Skipped Samples
33	ZHLNSTPF	☐	QZHLNSTPF	QANZAHL4	INT4	10	0	Sample Size (No. of Valid Values in Sample)
34	ZHLNKF	☐	QZHLNKF	QANZAHL4	INT4	10	0	No. of Samples with Critical Defect as Defect Class
35	ZHLNHF	☐	QZHLNHF	QANZAHL4	INT4	10	0	No. of Samples with Major Defect as Defect Class
36	ZHLNNF	☐	QZHLNNF	QANZAHL4	INT4	10	0	Number of Samples with Minor Defect as Defect Class
37	SUMFEHEH	☐	QSUMFEHLEH	INT4	INT4	10	0	Total of Nonconforming Units
38	SUMFANT	☐	QSUMFANT	QSTATWERT	FLTP	16	16	Total Nonconforming Shares
39	SIGMA	☐	QMISSTD	QSTATWERT	FLTP	16	16	Standard Deviation
40	SIGMA_NKST	☐	QSTELLEN	QSTELLEN	INT1	3	0	Number of Places to the Right of a Decimal Point (Accuracy)
41	XQUER	☐	QMISMITTEL	QSTATWERT	FLTP	16	16	Mean Value
42	XQUER_NKST	☐	QSTELLEN	QSTELLEN	INT1	3	0	Number of Places to the Right of a Decimal Point (Accuracy)
43	ZHLNSTAT	☐	QZHLNSTAT	QANZAHL4	INT4	10	0	Number of Valid Single Values
44	SUMEW	☐	QSUMEW	QSTATWERT	FLTP	16	16	Total of Valid Single Values
45	SUMMW	☐	QSUMMW	QSTATWERT	FLTP	16	16	Total of Mean Values
46	SUMVARIN	☐	QSUMVARIN	QSTATWERT	FLTP	16	16	Total of Single Value Variances
47	SUMSIGMAST	☐	QSUMSIGMASTP	QSTATWERT	FLTP	16	16	Total of Sample Dispersions
48	SUMVAR	☐	QSUMVAR	QSTATWERT	FLTP	16	16	Total of Sample Variances
49	TOLUN	☐	QTOLUN	QSOLLWERTE	FLTP	16	16	Lower Tolerance Limit
50	TOLUNNI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
51	TOLOB	☐	QTOLOB	QSOLLWERTE	FLTP	16	16	Upper Specification Limit
52	TOLOBNI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
53	TOL_NKST	☐	QSTELLEN	QSTELLEN	INT1	3	0	Number of Places to the Right of a Decimal Point (Accuracy)
54	CP	☐	QCP	QSTATWERT	FLTP	16	16	Process Capability Index (Cp Value)
55	CPK	☐	QCPK	QSTATWERT	FLTP	16	16	Process Capability Index (Cpk Value)
56	CP_NKST	☐	QSTELLEN	QSTELLEN	INT1	3	0	Number of Places to the Right of a Decimal Point (Accuracy)
57	STAFO_RALL	☐	STAFO_RALL	STAFO	CHAR	6	0	Update Group: All Inspection Results	*
58	STAFO_RQUN	☐	STAFO_RQUN	STAFO	CHAR	6	0	Update Group: Quantitative Inspection Results	*
59	PRUEFDATUV	☐	QPRUEFDATV	DATUM	DATS	8	0	Inspection Start Date
60	WERKSTPRUE	☐	WERKSTPRUE	QWERKSTPRF	CHAR	12	0	QMIS Plant/Master Inspection Characteristic

History

Last changed by/on	SAP	20050409
SAP Release Created in