SAP ABAP Table MCQAQR_KYF (Comm. structure: Inspection results - key figures)

Hierarchy

☛ SAP_APPL (Software Component) Logistics and Accounting
   ⤷ QM (Application Component) Quality Management
     ⤷ QMEX (Package) QM: Extraction of Release-independent Objects

Basic Data

Table Category	INTTAB	Structure
Structure	MCQAQR_KYF	Table Relationship Diagram
Short Description	Comm. structure: Inspection results - key figures

Delivery and Maintenance

Pool/cluster
Delivery Class
Data Browser/Table View Maintenance	Display/Maintenance Allowed with Restrictions

Components

	Field	Key	Data Element	Domain	Data Type	Length	Decimal Places	Short Description	Check table
1	ANZFEHLEH	☐	QANZFEHEH4	QANZAHL4	INT4	10	0	Number of Nonconforming Sample Units
2	ANTEILNI	☐	QNIANTEIL	QNOTINI	CHAR	1	0	Not Initialized for Fraction
3	ANTEIL	☐	QANTEIL	QSTATWERT	FLTP	16	16	Estimated Fraction of Nonconforming Sample Units
4	ANZFEHLER	☐	QANZFEHL4	QANZAHL4	INT4	10	0	Number of Defects Found
5	ANZWERTO	☐	QANZWERTO4	QANZAHL4	INT4	10	0	Number of Measured Values Above the Tolerance Range
6	ANZWERTU	☐	QANZWERTU4	QANZAHL4	INT4	10	0	Number of Measured Values Below the Tolerance Range
7	MITTELWNI	☐	QNINITIAL	QKZ	CHAR	1	0	Value Not Initial if Set
8	MITTELWERT	☐	QMITTELWRT	QSTATWERT	FLTP	16	16	Arithmetic Mean of Valid Measured Values
9	ANTEILO	☐	QANTEILO	QSTATWERT	FLTP	16	16	Estimated Fraction Above the Tolerance Range
10	ANTEILU	☐	QANTEILU	QSTATWERT	FLTP	16	16	Estimated Fraction Below the Tolerance Range
11	STEUERKZ	☐	QMKCONTROL	QMKCONTROL	CHAR	30	0	Cntrl Indicator String for Insp. Char./Master Insp. Char.
12	TSTICHPRKZ	☐	QTSTICHPRO	QKZUMFS	CHAR	1	0	Partial Samples Possible
13	MASSEINHSW	☐	QMASSEH	MEINS	UNIT	3	0	Unit of Measurement, in Which Quantitative Data Is Stored	*
14	ZHLN	☐	QANZWERTG4	QANZAHL4	INT4	10	0	Number of Inspected Sample Units
15	ZHLNA	☐	QZHLNA	QANZAHL4	INT4	10	0	Number of Accepted Samples
16	ZHLNR	☐	QZHLNR	QANZAHL4	INT4	10	0	Number of Rejected Samples
17	ZHLNSKIP	☐	QZHLNSKIP	QANZAHL4	INT4	10	0	Number of Skipped Samples
18	ZHLNSTPF	☐	QZHLNSTPF	QANZAHL4	INT4	10	0	Sample Size (No. of Valid Values in Sample)
19	ZHLNKF	☐	QZHLNKF	QANZAHL4	INT4	10	0	No. of Samples with Critical Defect as Defect Class
20	ZHLNHF	☐	QZHLNHF	QANZAHL4	INT4	10	0	No. of Samples with Major Defect as Defect Class
21	ZHLNNF	☐	QZHLNNF	QANZAHL4	INT4	10	0	Number of Samples with Minor Defect as Defect Class
22	SUMFEHEH	☐	QSUMFEHLEH	INT4	INT4	10	0	Total of Nonconforming Units
23	SUMFANT	☐	QSUMFANT	QSTATWERT	FLTP	16	16	Total Nonconforming Shares
24	SIGMA	☐	QMISSTD	QSTATWERT	FLTP	16	16	Standard Deviation
25	SIGMA_NKST	☐	QSTELLEN	QSTELLEN	INT1	3	0	Number of Places to the Right of a Decimal Point (Accuracy)
26	XQUER	☐	QMISMITTEL	QSTATWERT	FLTP	16	16	Mean Value
27	XQUER_NKST	☐	QSTELLEN	QSTELLEN	INT1	3	0	Number of Places to the Right of a Decimal Point (Accuracy)
28	ZHLNSTAT	☐	QZHLNSTAT	QANZAHL4	INT4	10	0	Number of Valid Single Values
29	SUMEW	☐	QSUMEW	QSTATWERT	FLTP	16	16	Total of Valid Single Values
30	SUMMW	☐	QSUMMW	QSTATWERT	FLTP	16	16	Total of Mean Values
31	SUMVARIN	☐	QSUMVARIN	QSTATWERT	FLTP	16	16	Total of Single Value Variances
32	SUMSIGMAST	☐	QSUMSIGMASTP	QSTATWERT	FLTP	16	16	Total of Sample Dispersions
33	SUMVAR	☐	QSUMVAR	QSTATWERT	FLTP	16	16	Total of Sample Variances
34	TOLUN	☐	QTOLUN	QSOLLWERTE	FLTP	16	16	Lower Tolerance Limit
35	BWTOLUNNI	☐	QBWTOLUNNI	QBW01	INT1	3	0	Lower Tolerance Limit Exists
36	TOLOB	☐	QTOLOB	QSOLLWERTE	FLTP	16	16	Upper Specification Limit
37	BWTOLOBNI	☐	QBWTOLOBNI	QBW01	INT1	3	0	Upper Tolerance Limit Exists
38	TOL_NKST	☐	QSTELLEN	QSTELLEN	INT1	3	0	Number of Places to the Right of a Decimal Point (Accuracy)
39	CP	☐	QCP	QSTATWERT	FLTP	16	16	Process Capability Index (Cp Value)
40	CPK	☐	QCPK	QSTATWERT	FLTP	16	16	Process Capability Index (Cpk Value)
41	CP_NKST	☐	QSTELLEN	QSTELLEN	INT1	3	0	Number of Places to the Right of a Decimal Point (Accuracy)
42	SOLLWERT	☐	QSOLLWERTE	QSOLLWERTE	FLTP	16	16	Target Value for a Quantitative Characteristic
43	BWSOLLWNI	☐	QBWSOLLWNI	QBW01	INT1	3	0	Target value exists
44	GRENZEOB1	☐	QGRENZOB1	QSOLLWERTE	FLTP	16	16	First Upper Specification Limit
45	BWGRENZEOB1NI	☐	QBWGRENZOB1NI	QBW01	INT1	3	0	Additional first upper limit value exists
46	GRENZEUN1	☐	QGRENZUN1	QSOLLWERTE	FLTP	16	16	First Lower Specification Limit
47	BWGRENZEUN1NI	☐	QBWGRENZUN1NI	QBW01	INT1	3	0	Additional 1st lower limit exists
48	GRENZEOB2	☐	QGRENZOB2	QSOLLWERTE	FLTP	16	16	Second Upper Specification Limit
49	BWGRENZEOB2NI	☐	QBWGRENZOB2NI	QBW01	INT1	3	0	Additional 2nd upper limit exists
50	GRENZEUN2	☐	QGRENZUN2	QSOLLWERTE	FLTP	16	16	Second Lower Specification Limit
51	BWGRENZEUN2NI	☐	QBWGRENZUN2NI	QBW01	INT1	3	0	Additional 2nd lower limit exists

History

Last changed by/on	SAP	20030325
SAP Release Created in