SAP ABAP Table MCQAQR (Insp. result-sample/charac.: Communication structure)
Hierarchy
☛
SAP_APPL (Software Component) Logistics and Accounting
⤷ QM-QC-IS (Application Component) Information System
⤷ QG02 (Package) QM quality information system
⤷ QM-QC-IS (Application Component) Information System
⤷ QG02 (Package) QM quality information system
Basic Data
Table Category | INTTAB | Structure |
Structure | MCQAQR | Table Relationship Diagram |
Short Description | Insp. result-sample/charac.: Communication structure |
Delivery and Maintenance
Pool/cluster | ||
Delivery Class | ||
Data Browser/Table View Maintenance | Display/Maintenance Allowed with Restrictions |
Components
Field | Key | Data Element | Domain | Data Type |
Length | Decimal Places |
Short Description | Check table |
|
---|---|---|---|---|---|---|---|---|---|
1 | .INCLUDE | 0 | 0 | Insp. result-sample/charac.: Summarization characs. | |||||
2 | PRUEFLOS | QPLOS | QPLOS | NUMC | 12 | 0 | Inspection Lot Number | * | |
3 | VORGLFNR | QLFNKN | KNTNR | NUMC | 8 | 0 | Current Node Number from Order Counter APLZL | ||
4 | MERKNR | QMERKNRP | QMERKNRP | NUMC | 4 | 0 | Inspection Characteristic Number | ||
5 | PROBENR | QSTIPRONR | QPROBENR | NUMC | 6 | 0 | Number of the Partial Sample | * | |
6 | QPMK_REF | QKZ_REF_EE | QKZ_REF_EE | CHAR | 1 | 0 | Type of Master Insp. Characteristic Ref. Results Recording | ||
7 | QPMK_WERKS | QZAEHLER | QZAEHLER | CHAR | 4 | 0 | Plant for the Master Inspection Characteristic | ||
8 | VERWMERKM | QMERKNR | QMERKNR | CHAR | 8 | 0 | Master Inspection Characteristics | * | |
9 | ERKGEW | QMERKGEW | QMERKKLAS | CHAR | 2 | 0 | Weighting of the Characteristic | * | |
10 | STATUSR | QBEASTATUS | QSTATUS | CHAR | 1 | 0 | Results Record Status | * | |
11 | MBEWERTG | QMBEWERTG | QEEBEWERTG | CHAR | 1 | 0 | Inspection Result Valuation | ||
12 | ATTRIBUT | QATTRIBUT | QATTRIBUT | CHAR | 1 | 0 | Attribute of the Results Record (Valid, Invalid,...) | ||
13 | .INCLUDE | 0 | 0 | Insp. result-sample/charac.: Scores | |||||
14 | ANZFEHLEH | QANZFEHEH4 | QANZAHL4 | INT4 | 10 | 0 | Number of Nonconforming Sample Units | ||
15 | ANTEILNI | QNIANTEIL | QNOTINI | CHAR | 1 | 0 | Not Initialized for Fraction | ||
16 | ANTEIL | QANTEIL | QSTATWERT | FLTP | 16 | 16 | Estimated Fraction of Nonconforming Sample Units | ||
17 | ANZFEHLER | QANZFEHL4 | QANZAHL4 | INT4 | 10 | 0 | Number of Defects Found | ||
18 | ANZWERTO | QANZWERTO4 | QANZAHL4 | INT4 | 10 | 0 | Number of Measured Values Above the Tolerance Range | ||
19 | ANZWERTU | QANZWERTU4 | QANZAHL4 | INT4 | 10 | 0 | Number of Measured Values Below the Tolerance Range | ||
20 | MITTELWNI | QNINITIAL | QKZ | CHAR | 1 | 0 | Value Not Initial if Set | ||
21 | MITTELWERT | QMITTELWRT | QSTATWERT | FLTP | 16 | 16 | Arithmetic Mean of Valid Measured Values | ||
22 | ANTEILO | QANTEILO | QSTATWERT | FLTP | 16 | 16 | Estimated Fraction Above the Tolerance Range | ||
23 | ANTEILU | QANTEILU | QSTATWERT | FLTP | 16 | 16 | Estimated Fraction Below the Tolerance Range | ||
24 | STEUERKZ | QMKCONTROL | QMKCONTROL | CHAR | 30 | 0 | Cntrl Indicator String for Insp. Char./Master Insp. Char. | ||
25 | TSTICHPRKZ | QTSTICHPRO | QKZUMFS | CHAR | 1 | 0 | Partial Samples Possible | ||
26 | MASSEINHSW | QMASSEH | MEINS | UNIT | 3 | 0 | Unit of Measurement, in Which Quantitative Data Is Stored | * | |
27 | ZHLN | QANZWERTG4 | QANZAHL4 | INT4 | 10 | 0 | Number of Inspected Sample Units | ||
28 | ZHLNA | QZHLNA | QANZAHL4 | INT4 | 10 | 0 | Number of Accepted Samples | ||
29 | ZHLNR | QZHLNR | QANZAHL4 | INT4 | 10 | 0 | Number of Rejected Samples | ||
30 | ZHLNSKIP | QZHLNSKIP | QANZAHL4 | INT4 | 10 | 0 | Number of Skipped Samples | ||
31 | ZHLNSTPF | QZHLNSTPF | QANZAHL4 | INT4 | 10 | 0 | Sample Size (No. of Valid Values in Sample) | ||
32 | ZHLNKF | QZHLNKF | QANZAHL4 | INT4 | 10 | 0 | No. of Samples with Critical Defect as Defect Class | ||
33 | ZHLNHF | QZHLNHF | QANZAHL4 | INT4 | 10 | 0 | No. of Samples with Major Defect as Defect Class | ||
34 | ZHLNNF | QZHLNNF | QANZAHL4 | INT4 | 10 | 0 | Number of Samples with Minor Defect as Defect Class | ||
35 | SUMFEHEH | QSUMFEHLEH | INT4 | INT4 | 10 | 0 | Total of Nonconforming Units | ||
36 | SUMFANT | QSUMFANT | QSTATWERT | FLTP | 16 | 16 | Total Nonconforming Shares | ||
37 | SIGMA | QMISSTD | QSTATWERT | FLTP | 16 | 16 | Standard Deviation | ||
38 | SIGMA_NKST | QSTELLEN | QSTELLEN | INT1 | 3 | 0 | Number of Places to the Right of a Decimal Point (Accuracy) | ||
39 | XQUER | QMISMITTEL | QSTATWERT | FLTP | 16 | 16 | Mean Value | ||
40 | XQUER_NKST | QSTELLEN | QSTELLEN | INT1 | 3 | 0 | Number of Places to the Right of a Decimal Point (Accuracy) | ||
41 | ZHLNSTAT | QZHLNSTAT | QANZAHL4 | INT4 | 10 | 0 | Number of Valid Single Values | ||
42 | SUMEW | QSUMEW | QSTATWERT | FLTP | 16 | 16 | Total of Valid Single Values | ||
43 | SUMMW | QSUMMW | QSTATWERT | FLTP | 16 | 16 | Total of Mean Values | ||
44 | SUMVARIN | QSUMVARIN | QSTATWERT | FLTP | 16 | 16 | Total of Single Value Variances | ||
45 | SUMSIGMAST | QSUMSIGMASTP | QSTATWERT | FLTP | 16 | 16 | Total of Sample Dispersions | ||
46 | SUMVAR | QSUMVAR | QSTATWERT | FLTP | 16 | 16 | Total of Sample Variances | ||
47 | TOLUN | QTOLUN | QSOLLWERTE | FLTP | 16 | 16 | Lower Tolerance Limit | ||
48 | TOLUNNI | QNINITIAL | QKZ | CHAR | 1 | 0 | Value Not Initial if Set | ||
49 | TOLOB | QTOLOB | QSOLLWERTE | FLTP | 16 | 16 | Upper Specification Limit | ||
50 | TOLOBNI | QNINITIAL | QKZ | CHAR | 1 | 0 | Value Not Initial if Set | ||
51 | TOL_NKST | QSTELLEN | QSTELLEN | INT1 | 3 | 0 | Number of Places to the Right of a Decimal Point (Accuracy) | ||
52 | CP | QCP | QSTATWERT | FLTP | 16 | 16 | Process Capability Index (Cp Value) | ||
53 | CPK | QCPK | QSTATWERT | FLTP | 16 | 16 | Process Capability Index (Cpk Value) | ||
54 | CP_NKST | QSTELLEN | QSTELLEN | INT1 | 3 | 0 | Number of Places to the Right of a Decimal Point (Accuracy) | ||
55 | STAFO_RALL | STAFO_RALL | STAFO | CHAR | 6 | 0 | Update Group: All Inspection Results | * | |
56 | STAFO_RQUN | STAFO_RQUN | STAFO | CHAR | 6 | 0 | Update Group: Quantitative Inspection Results | * | |
57 | PRUEFDATUV | QPRUEFDATV | DATUM | DATS | 8 | 0 | Inspection Start Date | ||
58 | WERKSTPRUE | WERKSTPRUE | QWERKSTPRF | CHAR | 12 | 0 | QMIS Plant/Master Inspection Characteristic |
History
Last changed by/on | SAP | 20050409 |
SAP Release Created in |