SAP ABAP Message Class CE (CAPP messages)
Basic Data
Hierarchy
☛
SAP_APPL (Software Component) Logistics and Accounting
⤷ PP-BD-CAP (Application Component) Computer Aided Process Planning
⤷ CEV (Package) R/3 Applic. development: PPS CAPP standard times calculation
⤷ PP-BD-CAP (Application Component) Computer Aided Process Planning
⤷ CEV (Package) R/3 Applic. development: PPS CAPP standard times calculation
Attributes
Message class | CE | |
Short Description | CAPP messages | |
Changed On | 19970821 | |
Last Changed At | 121239 |
Messages
# | Message | Message Short Text | Documentation status | Authorization check |
---|---|---|---|---|
1 | 000 | -------- Messages for calculation of standard values, formulas --------- | ||
2 | 001 | Cannot start transaction &1 | ||
3 | 002 | Enter a formula name | ||
4 | 003 | Enter a table as origin for the characteristic | ||
5 | 004 | Check your entries | ||
6 | 005 | Formula contains more & than & | ||
7 | 006 | Do not use the character "&" in formulas | ||
8 | 007 | With single quotes, always enter beginning and ending quotes | ||
9 | 008 | Do not enter a hyphen at the end of a characteristic name | ||
10 | 009 | Please insert a space before the "-" in "&-&" | ||
11 | 010 | & (&), item & | ||
12 | 011 | Enter an operator before & or an exponent after it | ||
13 | 012 | Missing entry | ||
14 | 013 | Do not enter an origin with origin key "&" | ||
15 | 014 | Enter at least one characteristic in the formula | ||
16 | 015 | Characteristic & does not exist | ||
17 | 016 | Formula & does not exist | ||
18 | 017 | Formula & becomes recursive: It is referred to in formula & | ||
19 | 019 | The format of characteristic & is not numeric | ||
20 | 020 | Table field &-& is defined as & | ||
21 | 021 | Characteristic & has more than & characters | ||
22 | 022 | & & was not saved since the formula has not yet been entered | ||
23 | 031 | Position the cursor on a characteristic line | ||
24 | 036 | Characteristic & does not exist | ||
25 | 037 | Characteristic & is not assigned to a table | ||
26 | 038 | Line break not possible in this formula line | ||
27 | 039 | The subsequent line does not fit into this line | ||
28 | 040 | The formula lines are full: Insertion not possible | ||
29 | 041 | The cursor is not on a formula line | ||
30 | 042 | Enter formula name | ||
31 | 043 | Formula & causes recursiveness | ||
32 | 046 | Do not enter characteristics with more than & characters in formulas | ||
33 | 047 | Only use backets where necessary | ||
34 | 050 | For formula &, there is no text in language & | ||
35 | 070 | *------- Methods -------------------------------------------------------- | ||
36 | 071 | Enter the formula or method to be used to create the method | ||
37 | 072 | Enter either a formula or a method in the second screen section | ||
38 | 073 | Maximum number of levels has been reached | ||
39 | 074 | Multiple use of characteristics | ||
40 | 076 | Method is recursive: Basic formula & refers to itself | ||
41 | 077 | The value type and unit of method & have different dimensions | ||
42 | 078 | Enter the name of the method | ||
43 | 079 | Method & does not exist | ||
44 | 080 | For method &, there is no text in language & | ||
45 | 081 | The method is locked by user & | ||
46 | 082 | Choose the database to be accessed | ||
47 | 083 | No default value exists for characteristic "&" | ||
48 | 084 | There is no origin which could be deleted | ||
49 | 085 | Maintain the basic data for method & | ||
50 | 086 | You should maintain a database as origin | ||
51 | 087 | Data for characteristic & is taken from & | ||
52 | 088 | Rule for characteristic & is changed from & to & | ||
53 | 089 | Data is taken from &; no change of rule possible | ||
54 | 100 | *------- Generation of table accesses ----------------------------------- | ||
55 | 101 | The generation report & does not exist | ||
56 | 102 | Error when saving generation report & | ||
57 | 103 | The generation of table accesses is restricted to & key fields | ||
58 | 104 | *------- Maintaining rules ---------------------------------------------- | ||
59 | 105 | Select a rule type | ||
60 | 106 | Select only one rule type | ||
61 | 107 | Characteristic & has no & | ||
62 | 108 | You should only enter search rules when accessing tables | ||
63 | 109 | Assign to characteristic & a field from Table & | ||
64 | 110 | Enter the table to be used for conversion | ||
65 | 111 | Table & cannot be used for conversion | ||
66 | 113 | The rule for characteristic & has been marked for deletion | ||
67 | 114 | Conversion rule and origin from table lead to inconsistency | ||
68 | 115 | You should maintain a different origin | ||
69 | 130 | *------- Use of the rules ----------------------------------------------- | ||
70 | 131 | Method &: No entry has been found in the conversion table & | ||
71 | 132 | Characteristic &: Value & could not be converted | ||
72 | 133 | Characteristic &: Value & is not & | ||
73 | 150 | *------- Where-used lists/explosion ------------------------------------- | ||
74 | 151 | Enter only one CAPP element | ||
75 | 152 | & & has no usage in & | ||
76 | 153 | & does not contain any & (new selection) | ||
77 | 154 | Specify a CAPP element | ||
78 | 155 | Select a CAPP element | ||
79 | 156 | The method becomes recursive if you specify this origin | ||
80 | 157 | Characteristic & is also contained in origin & & | ||
81 | 200 | *------- Process -------------------------------------------------------- | ||
82 | 201 | Enter a method | ||
83 | 202 | This method is already allocated to the process | ||
84 | 203 | Position the cursor on a method line | ||
85 | 204 | So far, no method has been allocated to process & | ||
86 | 205 | No method has been marked for automatic selection | ||
87 | 206 | Enter a process text | ||
88 | 207 | Assign the methods first | ||
89 | 208 | No process text exists for & & | ||
90 | 209 | A text already existed: The text has been changed | ||
91 | 210 | No new process text has been generated | ||
92 | 211 | The process text has been generated | ||
93 | 212 | Process & does not exist | ||
94 | 213 | For process &, no text exists in language & | ||
95 | 214 | Deletion not possible: & is still used in the routing | Space: object requires documentation | |
96 | 215 | Enter the name of the process | ||
97 | 250 | *------- Work center/technical data-------------------------------------- | ||
98 | 251 | Enter a process | ||
99 | 252 | This process is already allocated to the work center | ||
100 | 253 | Position the cursor on a process line | ||
101 | 254 | Allocate at least one process to the work center | ||
102 | 255 | You have not marked a process for automatic selection | ||
103 | 256 | First select your entries | Space: object requires documentation | |
104 | 257 | Process & and work center & are still used in operations | Space: object requires documentation | |
105 | 258 | One or more processes are still used in task lists | Space: object requires documentation | |
106 | 259 | Work center & has no technical data | Space: object requires documentation | |
107 | 260 | Delete the selected sub-calculations | Space: object requires documentation | |
108 | 300 | *------ Calculation of standard times/simulation ------------------------ | ||
109 | 301 | There is no further sub-calc. data | ||
110 | 305 | There are no methods allocated to work center & or process & | ||
111 | 306 | You cannot use CAPP with & & | ||
112 | 307 | Enter the type for & & | ||
113 | 308 | Process & is not allocated to work center & | ||
114 | 309 | Method & is not allocated to process & | ||
115 | 310 | Method & is not allocated to work center & | ||
116 | 311 | Enter a process for the method | ||
117 | 312 | Work center &: No processes for automatically calculation exist | ||
118 | 313 | Work center &: No methods exist for automatic calculation | ||
119 | 314 | So far, no process has been assigned to work center & | ||
120 | 315 | So far, no method has been allocated to work center & | ||
121 | 316 | Allocate methods to process & first | ||
122 | 317 | Select at least one method for process & | ||
123 | 318 | * W-, I-, S-messages when calling up the simulation | ||
124 | 319 | Automatic selection of a process is not possible for work center & | ||
125 | 320 | Automatic selection of a method is not possible for process & | ||
126 | 321 | Select at least one process | ||
127 | 322 | Select at least one method | ||
128 | 323 | No further sub-calculation numbers exist for this operation | ||
129 | 324 | Process & completed; continue with process & | ||
130 | 326 | The last selected process & has been completed | ||
131 | 327 | Method & has been calculated; continue with method & | ||
132 | 328 | The last selected method & has been processed | ||
133 | 329 | No standard values have been calculated for operation & using CAPP | ||
134 | 330 | Complete your entries | ||
135 | 331 | Select at least one sub-calculation | ||
136 | 332 | You have reached the first selected sub-calculation | ||
137 | 333 | You have reached the last selected sub-calculation | ||
138 | 334 | Select at least one characteristic | ||
139 | 335 | You have reached the first selected characteristic | ||
140 | 336 | You have reached the last selected characteristic | ||
141 | 337 | To calculate std. values via CAPP, enter a work center in the op./sub-op. | ||
142 | 338 | The aut. calculation of std. values for this operation has been cancelled | ||
143 | 339 | CAPP data already exists for this operation | ||
144 | 340 | You should maintain the CAPP flow control for plant & | ||
145 | 341 | No standard values have been defined for work center & | ||
146 | 342 | Conversion from unit & to unit & is not possible | ||
147 | 343 | There is no bill of materials for this material | ||
148 | 344 | Material "&" does not exist | ||
149 | 345 | Method &: No entry was found in Table & | ||
150 | 346 | At present there is no log | ||
151 | 347 | Specify a plant | ||
152 | 348 | Enter a work center | ||
153 | 349 | For process & --------------------------------- | ||
154 | 350 | End of simulation | ||
155 | 351 | Problems when calculating using method &; check log | ||
156 | 352 | The calculation using method & was cancelled | ||
157 | 353 | Enter a value for each characteristic | ||
158 | 354 | Method & has another parameter ID than work center & | ||
159 | 355 | Method &: For work center &, you may not maintain std. value & | ||
160 | 356 | Method &: For wor.cntr. &, std. value & should not be maintained | ||
161 | 357 | Meth. & and the operation have base quantities with diff. dimensions | ||
162 | 358 | Method &: Table & cannot be accessed | ||
163 | 359 | Work center & is marked for deletion | ||
164 | 360 | Work center & is locked | ||
165 | 361 | Method &: Base quantity & is not equal to 1 | ||
166 | 362 | Method &: Value type & cannot be used with task list type "&" | ||
167 | 363 | Method & with value type & cannot be used with usage & | ||
168 | 364 | The system determined the number of executions for method & | ||
169 | 365 | No costing for task list type: & Task list: & Operation & for CAPP online | Space: object requires documentation | |
170 | 380 | * For accessing BOM | ||
171 | 382 | You should select one or more items in the master data | ||
172 | 383 | There is a separate function for accessing table "&" | ||
173 | 384 | Table & is not suitable as origin | ||
174 | 385 | Table & not in customer name range, but already used in stand.val.calc. | ||
175 | 400 | *------ Time component menu --------------------------------------------- | ||
176 | 401 | No value components exist for menu & & | ||
177 | 402 | Enter a multiplier for divisor "&" | ||
178 | 403 | Value type & is still used in methods | ||
179 | 404 | Machine type & is still used in work centers | ||
180 | 405 | The rounding and add. values key & is still used in work centers | ||
181 | 406 | The rounding and add. values key & is still used in routings | ||
182 | 407 | The rounding and add.values key & is still used in another table | ||
183 | 408 | The planner group & is still being used | ||
184 | 409 | The sort string & is still being used | ||
185 | 450 | *------ Maintain customizing tables ------------------------------------- | ||
186 | 451 | The first value is missing | ||
187 | 452 | Sort the values in ascending order | ||
188 | 453 | Select an application | ||
189 | 454 | Table & does not exist | ||
190 | 456 | Enter rounding type, rounding increment and unit | ||
191 | 457 | & is not a time unit | ||
192 | 458 | Enter one type of dependency | ||
193 | 459 | You do not have an authorization for plant & | ||
194 | 460 | Enter either relevant or non-relevant item categories | ||
195 | 461 | Enter at least one item category | ||
196 | 462 | Enter rounding type, rounding increment and unit | ||
197 | 464 | Enter different value ranges for rounding within a rounding cat. | ||
198 | 465 | Only use qty. units with the same dimension in rounding cat. & | ||
199 | 467 | Enter a value | ||
200 | 468 | Sort the value ranges per rounding category in ascending order | ||
201 | 471 | Fill in this field for time components in menus | ||
202 | 474 | Only use quantity units with the same dimension in menu & | ||
203 | 475 | This line has not been selected for text generation | ||
204 | 477 | Only use a rounding category with an appropriate dimension | ||
205 | 478 | Only use letters, numbers or "-" in this field | ||
206 | 479 | Do not use parameter IDs with the origin "&" | ||
207 | 499 | *----- General error messages for CAPP ---------------------------------- | ||
208 | 500 | & & already exists | ||
209 | 501 | & & does not exist | ||
210 | 502 | & & is not released | ||
211 | 503 | Enter a table name | ||
212 | 504 | Table & does not exist | ||
213 | 505 | Table & has no fields | ||
214 | 506 | & & has not been changed | ||
215 | 507 | Save not possible because & & contains inactive elements | ||
216 | 508 | You should not select a key field for the field assignment | ||
217 | 509 | You should assign a field from table & to characteristic & | ||
218 | 511 | & & has been created | ||
219 | 512 | & & has been saved | ||
220 | 513 | & & has been deleted | ||
221 | 514 | & & is locked by user & | ||
222 | 515 | & & is locked (being processed by another user) | ||
223 | 516 | & & has "inactive" status | ||
224 | 517 | & | ||
225 | 518 | Position the cursor on a characteristic line | ||
226 | 519 | Programm error: & & & | ||
227 | 520 | Method &: Method result caused overflow | ||
228 | 521 | Method &, formula &: Division by zero | ||
229 | 522 | Method &, formula &: Error when calculating a power | ||
230 | 523 | Standard value & caused overflow | ||
231 | 524 | Method & formula &: Error when calculating a logarithm | ||
232 | 525 | Operation & caused overflow | ||
233 | 526 | Method &, formula &: Error when taking a root | ||
234 | 527 | & is used in & &. Changes only possible to limited extent | ||
235 | 528 | & is used in & &. Deletion not possible | ||
236 | 529 | & is used & times. Changes only poss. to limited extent | ||
237 | 530 | & is used & times. Deletion not possible | ||
238 | 531 | Select one option | ||
239 | 532 | & & contains signs that are not permitted | ||
240 | 536 | Enter a value which is greater than or equal to zero | ||
241 | 537 | Enter a menu name | ||
242 | 538 | Menu & does not exist | ||
243 | 539 | No menu lines exist for menu & | ||
244 | 540 | No menu components exist for menu & | ||
245 | 541 | All CAPP elements for work center & are consistent | ||
246 | 542 | Formula & (in method &) is not released yet | ||
247 | 544 | Method &, formula &: Error in calculation | ||
248 | 545 | Operation &, sub-operation & caused overflow | ||
249 | 546 | Enter a description | ||
250 | 547 | No documentation exists for & & | ||
251 | 548 | Internal error calling SAPscript | ||
252 | 549 | System error in accessing characteristic data | ||
253 | 550 | Characteristic "&" has no origin | ||
254 | 551 | You should maintain a table as origin | ||
255 | 552 | Origin & is not & | ||
256 | 553 | The system expects you to enter a closing bracket or an operator | ||
257 | 554 | Correct the syntax error in the formula | ||
258 | 555 | Place the cursor on a line which may be selected. | ||
259 | 556 | Internal error in number assignment | ||
260 | 557 | Number assignment: numbers are in critical area | ||
261 | 558 | Number assignment: The last number has been assigned. | ||
262 | 559 | Origin & is not a genuine CAPP table | Space: object requires documentation | |
263 | 560 | Table names of more than 10 characters are not permitted | Space: object requires documentation | |
264 | 561 | BOM & alternative & application & was selected for material & | Space: object requires documentation | |
265 | 562 | &1 material &2 routing &3 operation &4 | Space: object requires documentation | |
266 | 600 | *------- Messages for routing generation -------------------------------- |
History
Last changed on/by | 19970821 | SAP | |
SAP Release Created in |