SAP ABAP Message Class RU (Messages for order completion confirmation)
Basic Data
Hierarchy
☛
BBPCRM (Software Component) BBPCRM
⤷
CRM-CIC (Application Component) Interaction Center WinClient
⤷
CO (Package) R/3 Application development: PP Production orders

⤷

⤷

Attributes
Message class | ![]() |
RU |
Short Description | ![]() |
Messages for order completion confirmation |
Changed On | ![]() |
20131127 |
Last Changed At | ![]() |
174354 |
Messages
# | Message | Message Short Text | Documentation status | Authorization check |
---|---|---|---|---|
1 | ![]() |
Enter confirmation number or order/sequence/operation/suboperation | Space: object requires documentation | |
2 | ![]() |
Order & not found, check entry | ||
3 | ![]() |
Plant & not found, check entry | ||
4 | ![]() |
Material &1 not found in plant &2, check entry | ||
5 | ![]() |
Sequence &1 is not defined in order &2, check entry | ||
6 | ![]() |
Sequence &1 operation &2 not found in order &3, check entry | ||
7 | ![]() |
Confirmation no. &1 does not correspond to operation &2, check entry | ||
8 | ![]() |
No operations exist in order & | ||
9 | ![]() |
Order & contains no operations that can be confirmed | ||
10 | ![]() |
No parameters defined for plant &1 order type &2 | ||
11 | ![]() |
Operation &1 of sequence &2 does not require confirmation | ||
12 | ![]() |
Release operation &1 of sequence &2 | ||
13 | ![]() |
No confirmations can be made, order is not fully (or partially) released | ||
14 | ![]() |
Operation &1 of sequence &2 is already finally confirmed | ||
15 | ![]() |
& is after validity period of factory calendar, check date | ||
16 | ![]() |
& is before validity period of factory calendar, check date | ||
17 | ![]() |
Factory calendar not in buffer. Contact system administrator | ||
18 | ![]() |
Date & is invalid (check entry) | ||
19 | ![]() |
Posting date is in the past, check entry | ||
20 | ![]() |
Confirmation no. & not found, check entry | ||
21 | ![]() |
Confirmation no. &1 does not correspond to order &2, check entry | ||
22 | ![]() |
Confirmation no. &1 does not correspond to sequence &2, check entry | ||
23 | ![]() |
Select an operation | ||
24 | ![]() |
Preceding operation &1 of sequence &2 not yet confirmed | Space: object requires documentation | |
25 | ![]() |
Operation &1 of sequence &2 externally processed, confirm via goods rcpt | ||
26 | ![]() |
Operation &1 of sequence &2 cannot be confirmed | ||
27 | ![]() |
Enter a date with the time | ||
28 | ![]() |
Two operation times are not in ascending order | ||
29 | ![]() |
According to factory calendar & (&) is not a workday (check entry) | Space: object requires documentation | |
30 | ![]() |
Date &, time & is in the future | ||
31 | ![]() |
Check the new activities for work center & in plant & | ||
32 | ![]() |
Work center & does not exist in plant & (check your entry) | Space: object requires documentation | |
33 | ![]() |
Confirmed activity must not be smaller than 0 (check entry) | ||
34 | ![]() |
Confirmed quantity must not be smaller than 0 (check entry) | ||
35 | ![]() |
Confirmed activity must not be greater than 0 (check entry) | ||
36 | ![]() |
Underdelivery not allowed for final confirmation (check entry) | ||
37 | ![]() |
Confirmed quantity is smaller than underdelivery tolerance | ||
38 | ![]() |
Confirmed quantity greater than overdelivery tolerance | ||
39 | ![]() |
Activities are recalculated due to quantity change (please note) | ||
40 | ![]() |
Personnel master record & not found (check entry) | ||
41 | ![]() |
Conf. no. & does not correspond to sub-operation & & (check entry) | ||
42 | ![]() |
Sequence & operation & sub-operation & not found in order & | ||
43 | ![]() |
Posting date must not be in the future | ||
44 | ![]() |
You have no authorization in plant & for order type & | ||
45 | ![]() |
Operation & sub-operation & of sequence & is externally processed | ||
46 | ![]() |
Operation & sub-operation & of sequence & must not be confirmed | ||
47 | ![]() |
Operation & sub-operation & of sequence & does not require confirmation | ||
48 | ![]() |
Function "summary confirmation" for op. & of seq. & not supported | Space: object requires documentation | |
49 | ![]() |
Order & is already confirmed | ||
50 | ![]() |
The operation data must be transferred for the confirmation | ||
51 | ![]() |
Orders of the order type & cannot be confirmed | ||
52 | ![]() |
The order header data must be transferred for the confirmation | ||
53 | ![]() |
Standard confirmation is not possible for operation & sequence & | ||
54 | ![]() |
Operation & of sequence & does not require confirm./is not open | ||
55 | ![]() |
Operation & sub-operation & of sequence & does not require conf./not open | ||
56 | ![]() |
You have not authorization for plant & order type & | ||
57 | ![]() |
Order & is deleted (you cannot carry out confirmations) | ||
58 | ![]() |
Select a sub-operation | ||
59 | ![]() |
Enter a reason for scrap variance | ||
60 | ![]() |
Invalid reason & plant & (check entry) | ||
61 | ![]() |
Select line with confirmation | ||
62 | ![]() |
Confirmation & counter & is already cancelled | ||
63 | ![]() |
No sub-operations exist for operation & of sequence & | ||
64 | ![]() |
Order & has not yet been confirmed | ||
65 | ![]() |
Degree of processing must range from 0 to 100 (check entry) | The short text describes the object sufficiently | |
66 | ![]() |
Sub-operation & is already manually confirmed | ||
67 | ![]() |
Sub-operation & is already finally confirmed | ||
68 | ![]() |
Sub-operation & is already confirmed by & percent | ||
69 | ![]() |
Enter a unit of measure for activity & | ||
70 | ![]() |
No plant sections exist for plant & | ||
71 | ![]() |
Wage type & is not valid for personnel number or plant | Space: object requires documentation | |
72 | ![]() |
No confirmation has been carried out | ||
73 | ![]() |
Posting date & is earlier than release date & of the order | ||
74 | ![]() |
Date & is earlier than order release date & | ||
75 | ![]() |
Operation & of sequence & is already partially confirmed | ||
76 | ![]() |
Status management does not allow any confirmations | ||
77 | ![]() |
Alternative qty unit & cannot be converted into base unit & | ||
78 | ![]() |
Unit & cannot be converted into unit & | ||
79 | ![]() |
Record type & is not assigned to an activity | Space: object requires documentation | |
80 | ![]() |
Total no. of confirmations transferred: & of which & incorrect | ||
81 | ![]() |
No confirmation data to be transferred from subsystem | ||
82 | ![]() |
Error in RECEIVE_TABLE: data transfer not possible | ||
83 | ![]() |
Error in RESPON_TABLE: data transfer was not confirmed | ||
84 | ![]() |
Order type & not found (check entry) | ||
85 | ![]() |
Error in determining actual costs for order & | ||
86 | ![]() |
Order & is already being processed | ||
87 | ![]() |
No actual costs for network & (check log) | ||
88 | ![]() |
Quuantities cannot be specified for sub-operations | ||
89 | ![]() |
Date & is in the future | ||
90 | ![]() |
No backflushed items found in need of posting | ||
91 | ![]() |
& goods movements have been successfully executed | ||
92 | ![]() |
For operation & sequence & only a summary confirmation is possible | ||
93 | ![]() |
The summary condfirmation does not cause an update | ||
94 | ![]() |
No text defined in language & for order type & | ||
95 | ![]() |
No text defined in language & plant & for reason & | ||
96 | ![]() |
Work center & is not defined for routing type & | ||
97 | ![]() |
No open operation requiring confirmation exists for order & | ||
98 | ![]() |
No sub-operation in sequence & operation & requires confirmation | ||
99 | ![]() |
Saving not necessary, data was not changed | ||
100 | ![]() |
Confirmation of order & saved | ||
101 | ![]() |
Confirmations are saved | ||
102 | ![]() |
No sub-operation can be confirmed in sequence & for operation & | ||
103 | ![]() |
Operation & is confirmed with the sub-operation | ||
104 | ![]() |
PDC error record of confirmation & is deleted | ||
105 | ![]() |
Confirmation of network & saved | ||
106 | ![]() |
You can only cancel one confirmation per operation and transaction | ||
107 | ![]() |
Confirmation of order & is cancelled | ||
108 | ![]() |
Confirmation of network & is cancelled | ||
109 | ![]() |
Confirmations saved (Goods movements: &, failed: &) | ||
110 | ![]() |
Confirmation saved (Goods movements: &, failed: &) | ||
111 | ![]() |
No open sub-operation allowing confirmation exists in sequ. & op. & | ||
112 | ![]() |
No open sub-operation requiring confirmation exists for seq. & op. & | ||
113 | ![]() |
No operation in order & is open and allows confirmation | ||
114 | ![]() |
No operation in order & requires confirmation | ||
115 | ![]() |
Please enter confirmation number | ||
116 | ![]() |
Several operations were identified as the last operation in order & | ||
117 | ![]() |
Total quantity confirmed not equal to planned quantity to be confirmed | ||
118 | ![]() |
& goods movements were entered as a background job | ||
119 | ![]() |
Error in material & order & item & | ||
120 | ![]() |
Activity & cannot be entered | ||
121 | ![]() |
Activity & is not defined (confirmation is not possible) | ||
122 | ![]() |
Confirmation & counter & does not exist (check entry) | ||
123 | ![]() |
You cannot cancel confirmation & counter & | ||
124 | ![]() |
You have no authorization for Transaction & | ||
125 | ![]() |
Order & is not released | ||
126 | ![]() |
Network & is not released | ||
127 | ![]() |
Conf. no. & does not belong to order & (check entry) | ||
128 | ![]() |
Last selected confirmation reached | ||
129 | ![]() |
First selected confirmation reached | ||
130 | ![]() |
Goods movement could not be posted in the background | Space: object requires documentation | |
131 | ![]() |
Personnel master & does not exist in plant & (Check entries) | ||
132 | ![]() |
Material & not found in plant & (check entry) | ||
133 | ![]() |
Material & & is not handled in batches | ||
134 | ![]() |
Batch & & & & not found (check entry) | ||
135 | ![]() |
Storage location & not found for material & in plant & | ||
136 | ![]() |
Storage location & not yet created for material & | ||
137 | ![]() |
Structure explosion not possible for technical object in order & | ||
138 | ![]() |
Order & has no object reference | ||
139 | ![]() |
Overdelivery is not permitted (Check entry) | ||
140 | ![]() |
Position the cursor on a filled field | ||
141 | ![]() |
Goods movements redetermined due to quantity change | Space: object requires documentation | |
142 | ![]() |
Confirmation triggered by milestone | ||
143 | ![]() |
Confirmation is part of milestone confirmation - Check goods movements | ||
144 | ![]() |
Confirmation is milestone confirmation - Check goods movements | ||
145 | ![]() |
Deviation of work is maintained, but not active -> please check | ||
146 | ![]() |
Deviation of duration is maintained, but not active -> please check | ||
147 | ![]() |
No goods movements were posted with the confirmation | ||
148 | ![]() |
Unit & does not exist -> check your entry | ||
149 | ![]() |
Dimensions differ between unit entered (&) and op. unit & | ||
150 | ![]() |
Save manually entered confirmations before saving standard confirmation | ||
151 | ![]() |
Enter order number | ||
152 | ![]() |
Error when assigning number for object & | Space: object requires documentation | |
153 | ![]() |
Internal number assignment for object & (numbers are in critical area) | Space: object requires documentation | |
154 | ![]() |
Internal number assignment for object (last number was assigned) | Space: object requires documentation | |
155 | ![]() |
Confirmations were created at header level for order & | ||
156 | ![]() |
Confirmations have been entered at operation level for order & | ||
157 | ![]() |
Confirmation with counter & does not exist/has been cancelled | ||
158 | ![]() |
Internal no. assignment for error record document: No. in critical area | ||
159 | ![]() |
Internal assignment of doc. no. error record: last number assigned | ||
160 | ![]() |
You have reached the last selected operation | ||
161 | ![]() |
You have reached the first elected operation | ||
162 | ![]() |
The degree of processing is already & % | ||
163 | ![]() |
Number of confirmations saved for order &: & | ||
164 | ![]() |
& confirmations saved (goods movements: &, errors: &) | Space: object requires documentation | |
165 | ![]() |
Operation without unit: unit & is copied into the operation | ||
166 | ![]() |
Error in number assignment for error document (goods movement) | ||
167 | ![]() |
Entering a final confirmation will set the remaining work to zero | ||
168 | ![]() |
Entry 'No remaining work': Entry is set to zero | ||
169 | ![]() |
Not enough data entered to select operation | ||
170 | ![]() |
You are not authorized to carry out a confirmation | ||
171 | ![]() |
Operation does not exist (check entry) | Space: object requires documentation | |
172 | ![]() |
Operation cannot be selected due to parameter settings | ||
173 | ![]() |
Network & is deleted (you can no longer enter a confirmation) | Space: object requires documentation | |
174 | ![]() |
Confirmation data are incorrect | Space: object requires documentation | |
175 | ![]() |
Error document & & for material & is being processed | ||
176 | ![]() |
Confirmation does not exist or has been cancelled | ||
177 | ![]() |
You are not authorized to process work center & & | ||
178 | ![]() |
Invalid confirmation record class & | ||
179 | ![]() |
Mixed confirmation types (time ticket/time event) are not allowed | ||
180 | ![]() |
Sequence of time events not adhered to | ||
181 | ![]() |
Quantity deviation for GR items from inspection points | ||
182 | ![]() |
You can only process one pool per transaction | ||
183 | ![]() |
Enter either user or organizational unit | ||
184 | ![]() |
Enter organizational unit and type | ||
185 | ![]() |
Enter an agent | ||
186 | ![]() |
Select an operation with confirmation(s) | ||
187 | ![]() |
System: Wrong application | ||
188 | ![]() |
Individual capacity & / & does not exist (check entry) | Space: object requires documentation | |
189 | ![]() |
Final confirmation exists for indiv. cap. &/& | ||
190 | ![]() |
Individual cap. &/& is already manually confirmed | ||
191 | ![]() |
Select an individual capacity | ||
192 | ![]() |
No individual capacities exist | ||
193 | ![]() |
Goods movements are posted on & | ||
194 | ![]() |
& PDC error records processed | ||
195 | ![]() |
Automatic goods receipt for order & is not possible | ||
196 | ![]() |
You have no authorization for order type & plant & | ||
197 | ![]() |
No. of confirmations saved: & | ||
198 | ![]() |
No error records exist for selection criteria specified | Space: object requires documentation | |
199 | ![]() |
Confirmation was entered in a different application | ||
200 | ![]() |
************************** N e t w o r k s ****************************** | ||
201 | ![]() |
Select a confirmation line | ||
202 | ![]() |
Start date is later than finish date - please check | ||
203 | ![]() |
Start time is later than finish time - check entry | ||
204 | ![]() |
Unit & is not a time unit - enter a time unit | ||
205 | ![]() |
Maintain a unit for the duration | ||
206 | ![]() |
Enter confirmation or network | ||
207 | ![]() |
Activity & not found in network & | ||
208 | ![]() |
Activity & element & not found in network & | ||
209 | ![]() |
Actual date(s) is in the future (check parameters) | ||
210 | ![]() |
Work is confirmed - maintain the work center | ||
211 | ![]() |
Enter either forecast finish or forecast duration | Space: object requires documentation | |
212 | ![]() |
Network & contains no activities (check entry) | ||
213 | ![]() |
Select an operation | ||
214 | ![]() |
No (open) element found for activity & | ||
215 | ![]() |
Activity & does not require confirmation/is not open | ||
216 | ![]() |
Activity & element & does not require confirmation/is not open | ||
217 | ![]() |
You have maintained the actual work - please enter a unit of measure | ||
218 | ![]() |
Actual work + remaining work deviates by more than &% from planned work | ||
219 | ![]() |
Actual duration + remaining duration deviates by more than &% from schd. | ||
220 | ![]() |
No open activity exists for network & | ||
221 | ![]() |
Network & has not yet been confirmed | ||
222 | ![]() |
Internal error in processing of long text | ||
223 | ![]() |
Varying dimension for work units | ||
224 | ![]() |
Network & is already being processed | ||
225 | ![]() |
Unit & is invalid | ||
226 | ![]() |
Date & is before the end of factory calendar & | ||
227 | ![]() |
Date & is before the end of factory calendar & | ||
228 | ![]() |
Start date cannot be determined (calendar &) | ||
229 | ![]() |
You do not have the authorization for MRP group & in plant & | ||
230 | ![]() |
Actual/remaining work and degree of processing inconsistent | ||
231 | ![]() |
Final confirmation exists for network & | ||
232 | ![]() |
Network & has been confirmed at header level | ||
233 | ![]() |
Network & has been confirmed at activity level | ||
234 | ![]() |
Pool & does not exist | ||
235 | ![]() |
List does not contain selected confirmatios | ||
236 | ![]() |
&1 list entries were saved as pool &2 | Space: object requires documentation | |
237 | ![]() |
Pool & has been deleted | ||
238 | ![]() |
Operation & cannot be confirmed | ||
239 | ![]() |
The new or changed confirmation was copied | ||
240 | ![]() |
The cancelled confirmation was copied | ||
241 | ![]() |
Pool & already exists | ||
242 | ![]() |
Confirmation pool &1 is already being processed by &2 | Space: object requires documentation | |
243 | ![]() |
The pool of confirmations & cannot be locked | ||
244 | ![]() |
There are no entries in the confirmation pool | ||
245 | ![]() |
Select at least one confirmation line | ||
246 | ![]() |
Enter remaining activity or indicator FINISHED | ||
247 | ![]() |
Enter either remaining work or set the final confirmation indicator | ||
248 | ![]() |
Enter either degree of processing or set the final confirmation indicator | ||
249 | ![]() |
Check degree of processing and remaining work. | ||
250 | ![]() |
Actual work + remaining work exceeds planned work | ||
251 | ![]() |
Actual duration + remaining duration exceeds planned duration | ||
252 | ![]() |
Enter a unit of dimension TIME | ||
253 | ![]() |
You should enter a personnel number to call up time leveling | ||
254 | ![]() |
100% of planned time already recorded - please check | ||
255 | ![]() |
No incorrect confirmations were found | ||
256 | ![]() |
Default values for user & deleted | ||
257 | ![]() |
Default values for user & changed | ||
258 | ![]() |
Default values for user & created | ||
259 | ![]() |
Default values for user & set | ||
260 | ![]() |
No user-dependent default values exist | ||
261 | ![]() |
Select a line with the personnel number | ||
262 | ![]() |
Select a line with a work center | ||
263 | ![]() |
Place the cursor on a field in the list | ||
264 | ![]() |
Internal error when sorting | ||
265 | ![]() |
You have not selected any columns yet | ||
266 | ![]() |
Capacity category and split number must be maintained together | ||
267 | ![]() |
Enter execute start and execute finish | ||
268 | ![]() |
No record was found for selection | Space: object requires documentation | |
269 | ![]() |
& & & already in list - check remaining work | ||
270 | ![]() |
Formula &1 for calculating work contains division by zero! | Space: object requires documentation | |
271 | ![]() |
No confirmation that could be processed was found for network & | Space: object requires documentation | |
272 | ![]() |
Goods movements are redetermined because of status change | Space: object requires documentation | |
273 | ![]() |
Confirmation cancelled, goods movement: &, incorrect: & | Space: object requires documentation | |
274 | ![]() |
Please enter either actual start and actual finish or none of the fields | Space: object requires documentation | |
275 | ![]() |
Phase/operation & secondary resource & in process order & does not exist | Space: object requires documentation | |
276 | ![]() |
Phase/operation & in process order & does not exist (please check entry) | Space: object requires documentation | |
277 | ![]() |
No error can be displayed for line selected | Space: object requires documentation | |
278 | ![]() |
All incorrect confirmations in the system will be read | Space: object requires documentation | |
279 | ![]() |
Select at least one confirmation | Space: object requires documentation | |
280 | ![]() |
Select one confirmation only | Space: object requires documentation | |
281 | ![]() |
At least one confirmation was not checked | Space: object requires documentation | |
282 | ![]() |
Changes cannot be transferred | Space: object requires documentation | |
283 | ![]() |
Operation &1 in order &2 does not exist | Space: object requires documentation | |
284 | ![]() |
Operation &1 suboperation &2 in order &3 do not exist | Space: object requires documentation | |
285 | ![]() |
Order cannot be displayed | Space: object requires documentation | |
286 | ![]() |
&1 confirmations can be saved without errors | Space: object requires documentation | |
287 | ![]() |
No remaining duration/forecast finish possible for final confirmation | Space: object requires documentation | |
288 | ![]() |
Confirmation only possible after saving | Space: object requires documentation | |
289 | ![]() |
Goods movements retermined because of date change | Space: object requires documentation | |
290 | ![]() |
Activity type missing - confirmation will be saved without actual costs | Space: object requires documentation | |
291 | ![]() |
You are not authorized to carry out mass cancellation of confirmations | The short text describes the object sufficiently | |
292 | ![]() |
Forecast work of operation exceeds maximum work | The short text describes the object sufficiently | |
293 | ![]() |
Actual work exceeds maximum work | The short text describes the object sufficiently | |
294 | ![]() |
Remaining work exceeds maximum work | The short text describes the object sufficiently | |
295 | ![]() |
Confirmation saved, goods movements: &, deliveries: &, faulty: & | Space: object requires documentation | |
296 | ![]() |
& goods movements and & deliveries carried out successfully | The short text describes the object sufficiently | |
297 | ![]() |
************************** PM - Order ******************************** | The short text describes the object sufficiently | |
298 | ![]() |
Controlling area of work center (&) differs from order (&) | ||
299 | ![]() |
The cursor should not be on an empty line | ||
300 | ![]() |
Enter a plant for the work center | ||
301 | ![]() |
Only &2 decimal places are permitted for unit of measure &1 | Space: object requires documentation | |
302 | ![]() |
Select a line in the data entry section | Space: object requires documentation | |
303 | ![]() |
On entering a techn. object the other entries are ignored | Space: object requires documentation | |
304 | ![]() |
No standing order could be calculated for a techn. object | Space: object requires documentation | |
305 | ![]() |
No standing order was selected | Space: object requires documentation | |
306 | ![]() |
Select a line with the standing order | Space: object requires documentation | |
307 | ![]() |
No standing order is assigned to the functional location | Space: object requires documentation | |
308 | ![]() |
No standing order is assigned to equipment & | Space: object requires documentation | |
309 | ![]() |
Value help activity type: Enter plant, work center, posting date | Space: object requires documentation | |
310 | ![]() |
Actual or planned work center is adopted from operation/operation element | Space: object requires documentation | |
311 | ![]() |
Activity type filled - maintain workplace also | Space: object requires documentation | |
312 | ![]() |
Service type copied from work center | The short text describes the object sufficiently | |
313 | ![]() |
************************P D C - A N A L Y S I S************************** | ||
314 | ![]() |
There are no subsystem confirmations | ||
315 | ![]() |
Record type & is not supported | ||
316 | ![]() |
The time event was already reported | ||
317 | ![]() |
Error when deleting confirmations from table RUECK, RC = & | ||
318 | ![]() |
No authorization for HR pair formation | ||
319 | ![]() |
Pair formation: Conflict with subsequent confirmation | ||
320 | ![]() |
Pair formation: Conflict with previous confirmation | Space: object requires documentation | |
321 | ![]() |
Pair formation: Start confirmation is missing | ||
322 | ![]() |
Time determination: Work center & does not exist in plant & | ||
323 | ![]() |
Time determination: Capacity type & not defined for work center & | Space: object requires documentation | |
324 | ![]() |
Actual time determination: SI unit is missing | Space: object requires documentation | |
325 | ![]() |
Processing mode & is not supported | ||
326 | ![]() |
Error when reading order data (CO_RU_CONFIRMATION_PREPARE) | ||
327 | ![]() |
Error when checking confirmation data (CO_RU_CONFIRMATION_CHECK) | ||
328 | ![]() |
Error in number assignment for number range object PD_SEQ_NR | ||
329 | ![]() |
Error in HR plausibility check (HR_EVENT_CHECK) | ||
330 | ![]() |
Error when creating document records (CO_RU_CONFIRMATION_ADD) | ||
331 | ![]() |
Error when starting with buffer table, RC = &1 | Space: object requires documentation | |
332 | ![]() |
Error when updating document records | ||
333 | ![]() |
Error when cancelling the original confirmation (Table TEVEN) | ||
334 | ![]() |
Application indicator is missing or has the wrong value | ||
335 | ![]() |
Error when creating cancellation (Table PDSNR) | ||
336 | ![]() |
Error when creating time event (Table TEVEN) | ||
337 | ![]() |
Error when creating time event (Table PDSNR) | ||
338 | ![]() |
Previous order & is not yet confirmed | ||
339 | ![]() |
Goods receipt items cannot be entered | Space: object requires documentation | |
340 | ![]() |
Highlighted items need to be processed | Space: object requires documentation | |
341 | ![]() |
Posting period & & is locked (check posting date) | Space: object requires documentation | |
342 | ![]() |
Adhere to sequence when canceling time events | Space: object requires documentation | |
343 | ![]() |
Actual data for QM characteristics of operation & missing | ||
344 | ![]() |
Actual data for QM characteristics of sub-operation & & are missing | ||
345 | ![]() |
& selected error records cannot be processed | ||
346 | ![]() |
Invalid PDC communication channel & | Space: object requires documentation | |
347 | ![]() |
Quantities are not permitted for error handling operations | ||
348 | ![]() |
The time event contains no confirmation data | ||
349 | ![]() |
The time event record time is not supported | ||
350 | ![]() |
No confirmations were transferred | ||
351 | ![]() |
Errors in PD processing, RC = | ||
352 | ![]() |
Storage location &1 does not exist | Space: object requires documentation | |
353 | ![]() |
Error in actual time determination | ||
354 | ![]() |
Saving not necessary - no confirmations were created | ||
355 | ![]() |
Up until now only & & confirmed for predecessors & / & | ||
356 | ![]() |
Up until now only & & confirmed for preceding operation & | ||
357 | ![]() |
Incorrect split quantity (check entry) | ||
358 | ![]() |
You can only charge off in connection with final confirmation | ||
359 | ![]() |
Transaction was cancelled, confirmation was not saved | ||
360 | ![]() |
A serial number must be assigned to material & in plant & | ||
361 | ![]() |
Identification number & and personnel number & are not compatible | ||
362 | ![]() |
Enter personnel number or number of time recording ID card | ||
363 | ![]() |
Personnel no. or no. of time recording ID card cannot be entered | ||
364 | ![]() |
No error in actual cost calculation for order & | Space: object requires documentation | |
365 | ![]() |
Error in goods movements | ||
366 | ![]() |
System error: At least one quantity field contains negative values | ||
367 | ![]() |
& items cannot be processed | ||
368 | ![]() |
No resource for parallel process exists | ||
369 | ![]() |
Service & cannot be created manually | Space: object requires documentation | |
370 | ![]() |
Operation & for order & has been confirmed | Space: object requires documentation | |
371 | ![]() |
Quantity to be confirmed is less than the quantity confirmed up to now | Space: object requires documentation | |
372 | ![]() |
Operation & in sequence & cannot be confirmed by progress confirmation | Space: object requires documentation | |
373 | ![]() |
Milestone operation &1 of sequence &2 in order &3 not yet confirmed | Space: object requires documentation | |
374 | ![]() |
Selected operation & in sequence & is a milestone operation! | Space: object requires documentation | |
375 | ![]() |
Process control & is not defined for order category & | Space: object requires documentation | |
376 | ![]() |
No error record was found for selection | Space: object requires documentation | |
377 | ![]() |
& confirmations are processed by other users | Space: object requires documentation | |
378 | ![]() |
Previous operation already finally confirmed | Space: object requires documentation | |
379 | ![]() |
Operation & in sequence & cannot be confirmed by progress confirmation | Space: object requires documentation | |
380 | ![]() |
Subordinate order in collective order is already finally confirmed | Space: object requires documentation | |
381 | ![]() |
Confirmation procedure & is already active | Space: object requires documentation | |
382 | ![]() |
HR data transfer already active! | Space: object requires documentation | |
383 | ![]() |
All changes have been saved | Space: object requires documentation | |
384 | ![]() |
Item is not allowed | Space: object requires documentation | |
385 | ![]() |
Changes are not written to a transport request | Space: object requires documentation | |
386 | ![]() |
Transfer & KANBAN control cycles to ALE | Space: object requires documentation | |
387 | ![]() |
Transfer & KANBAN containers to ALE | Space: object requires documentation | |
388 | ![]() |
Transfer & KANBAN container status to ALE | Space: object requires documentation | |
389 | ![]() |
No operations were selected | Space: object requires documentation | |
390 | ![]() |
Transfer & operations to ALE | Space: object requires documentation | |
391 | ![]() |
No subsystem groupings were maintained | Space: object requires documentation | |
392 | ![]() |
No work centers relevant to subsystems were selected | Space: object requires documentation | |
393 | ![]() |
No PDC-related order types defined | Space: object requires documentation | |
394 | ![]() |
Transfer & operations and & labor-related records to ALE | Space: object requires documentation | |
395 | ![]() |
Transfer & work centers to ALE | Space: object requires documentation | |
396 | ![]() |
Transfer & variances to ALE | Space: object requires documentation | |
397 | ![]() |
Transfer & units of measure to ALE | Space: object requires documentation | |
398 | ![]() |
Transfer & activity types to ALE | Space: object requires documentation | |
399 | ![]() |
Transfer & plants to ALE | Space: object requires documentation | |
400 | ![]() |
Transfer & order statuses to ALE | Space: object requires documentation | |
401 | ![]() |
Transfer & material dependent units of measure to ALE | Space: object requires documentation | |
402 | ![]() |
Error when calling up rounding routine with unit & | Space: object requires documentation | |
403 | ![]() |
Problems in parallel processing of a confirmation process | Space: object requires documentation | |
404 | ![]() |
Account number of supplier or creditor & does not exist | Space: object requires documentation | |
405 | ![]() |
"Max. selected GM" with incorrect GMs can lead to problems | Space: object requires documentation | |
406 | ![]() |
Invalid entry: Job repetition can lead to infinite loop | Space: object requires documentation | |
407 | ![]() |
Order & closed | Space: object requires documentation | |
408 | ![]() |
Network & has been completed | Space: object requires documentation | |
409 | ![]() |
Withdrawal posting to batch totals record is not possible | Space: object requires documentation | |
410 | ![]() |
No control parameters were defined for application & | Space: object requires documentation | |
411 | ![]() |
No goods movements can be entered for the sub-operation | Space: object requires documentation | |
412 | ![]() |
No quantities can be confirmed for the sub-operation | Space: object requires documentation | |
413 | ![]() |
System error when writing error pool | Space: object requires documentation | |
414 | ![]() |
Enter a search string | ||
415 | ![]() |
Only the first 100 entries were found | ||
416 | ![]() |
No entries found | ||
417 | ![]() |
No authorization for & selected orders | Space: object requires documentation | |
418 | ![]() |
&1 confirmations are incorrect. For details see parameter DETAIL_RETURN | Space: object requires documentation | |
419 | ![]() |
Work center is missing for order &1 sequence &2 operation &3 | Space: object requires documentation | |
420 | ![]() |
& goods movements could not be processed | Space: object requires documentation | |
421 | ![]() |
The chosen function is not available in repetitive manufacturing | Space: object requires documentation | |
422 | ![]() |
No business process has been defined for operation or work center | Space: object requires documentation | |
423 | ![]() |
A confirmation function can only be executed in dialog mode | Space: object requires documentation | |
424 | ![]() |
Confirmation & with counter & does not exist | Space: object requires documentation | |
425 | ![]() |
&1 entries were deleted | Space: object requires documentation | |
426 | ![]() |
&1 confirmations were executed | Space: object requires documentation | |
427 | ![]() |
No confirmations could be executed | Space: object requires documentation | |
428 | ![]() |
Error in the assignment of activities to work center &1/&2 | Space: object requires documentation | |
429 | ![]() |
&1 planned confirmations have been saved | Space: object requires documentation | |
430 | ![]() |
Logical system &1 is incorrect | Space: object requires documentation | |
431 | ![]() |
No order number was entered for operation & | Space: object requires documentation | |
432 | ![]() |
No operation number was entered for order & | Space: object requires documentation | |
433 | ![]() |
Pair formation: End message for start time &1 &2 is missing | Space: object requires documentation | |
434 | ![]() |
Only &1 &2 for previous operation &3 from order &4 has been confirmed | Space: object requires documentation | |
435 | ![]() |
Underdelivery found on posting predecessor | Space: object requires documentation | |
436 | ![]() |
Dependent goods movement was incorrect | Space: object requires documentation | |
437 | ![]() |
Confirmation &1 / &2 is already processed | Space: object requires documentation | |
438 | ![]() |
Line &: Confirmed quantity is smaller than underdelivery tolerance | Space: object requires documentation | |
439 | ![]() |
Line &: Total confirmed qty does not equal planned qty to be confirmed | Space: object requires documentation | |
440 | ![]() |
Line &1: Preceding operation &2 has not been confirmed yet | Space: object requires documentation | |
441 | ![]() |
Line &1: Only &2 for predecessor &3 / &4 has been confirmed | Space: object requires documentation | |
442 | ![]() |
No production orders can be selected for the selection condition | Space: object requires documentation | |
443 | ![]() |
Entering quantities is not allowed for the entered time event | Space: object requires documentation | |
444 | ![]() |
Confirmation with external key &1 not found | Space: object requires documentation | |
445 | ![]() |
Confirmation cannot be successfully saved | Space: object requires documentation | |
446 | ![]() |
&1 is already activated | Space: object requires documentation | |
447 | ![]() |
PP-PDC: A problem occurred when creating IDOCs | Space: object requires documentation | |
448 | ![]() |
Order split for order &1 has been executed | Space: object requires documentation | |
449 | ![]() |
Progress confirmation not possible for rework operation | Space: object requires documentation | |
450 | ![]() |
Additional sub-operations/secondary resources are open | Space: object requires documentation | |
451 | ![]() |
You must first manually page through to check all entries. | Space: object requires documentation | |
452 | ![]() |
Data cannot be filtered in the delta download | Space: object requires documentation | |
453 | ![]() |
Confirmation terminated due to incorrect actual costs | Space: object requires documentation | |
454 | ![]() |
Confirmation terminated due to incorrect goods movements | Space: object requires documentation | |
455 | ![]() |
Termination flag. Actual costs only in connection with actual costs log | Space: object requires documentation | |
456 | ![]() |
Termination flag. Goods movement only in connection with goods move. log | Space: object requires documentation | |
457 | ![]() |
Problems during parallel processing of the download | Space: object requires documentation | |
458 | ![]() |
Task &1 with error: &2 | Space: object requires documentation | |
459 | ![]() |
Changing the movement type from goods receipt to goods issue not allowed | Space: object requires documentation | |
460 | ![]() |
A lock was set for work center & plant & | Space: object requires documentation | |
461 | ![]() |
A deletion flag was set for work center & in plant & | Space: object requires documentation | |
462 | ![]() |
Division through zero: Operation quantity of milestone operation is zero | Space: object requires documentation | |
463 | ![]() |
Division through zero: Gross header quantity of order & is zero | Space: object requires documentation | |
464 | ![]() |
Requirements quantity from batch totals records not taken into account | Space: object requires documentation | |
465 | ![]() |
Operation &1 is selected as an added operation | Space: object requires documentation | |
466 | ![]() |
Order &1 is selected as an added order | Space: object requires documentation | |
467 | ![]() |
Overview contains plus/minus components from engineering change mgmt | Space: object requires documentation | |
468 | ![]() |
HR data transfer executed, now refresh the list | The short text describes the object sufficiently | |
469 | ![]() |
&1 actual costs are intended for background processing | The short text describes the object sufficiently | |
470 | ![]() |
All HR future change records will be posted | Space: object requires documentation | |
471 | ![]() |
WIP batch functionality not active | Space: object requires documentation | |
472 | ![]() |
No operation could be confirmed for order & | Space: object requires documentation | |
473 | ![]() |
No phase could be confirmed for order & | Space: object requires documentation | |
474 | ![]() |
It was not possible to assign batch characteristics to any goods movement | Space: object requires documentation | |
475 | ![]() |
Error when classifying a goods receipt batch | Space: object requires documentation | |
476 | ![]() |
SFC &1 has already been confirmed (mile stone confirmation &2 &3) | The short text describes the object sufficiently | |
477 | ![]() |
Enter permitted origin (2 (PP) or 6 (PP-PI)) | The short text describes the object sufficiently | |
478 | ![]() |
************************ Single screen entry **************************** | Space: object requires documentation | |
479 | ![]() |
User settings were saved | Space: object requires documentation | |
480 | ![]() |
User settings could not be saved | Space: object requires documentation | |
481 | ![]() |
User interface predefined, because there is no definition in Customizing | Space: object requires documentation | |
482 | ![]() |
No header area exists | Space: object requires documentation | |
483 | ![]() |
Enter a profile | Space: object requires documentation | |
484 | ![]() |
Profile &1 &2 reprocessing indicator does not exist | Space: object requires documentation | |
485 | ![]() |
Field &1 contained in area &2 and &3 | Space: object requires documentation | |
486 | ![]() |
'Clear' indicator removed, because this is not possible for part.confirm. | Space: object requires documentation | |
487 | ![]() |
Profile &1 is already defined as the standard profile | Space: object requires documentation | |
488 | ![]() |
Before saving enter confirmation number or order/sequence/operation | Space: object requires documentation | |
489 | ![]() |
First enter confirmation number or order/sequence/operation | Space: object requires documentation | |
490 | ![]() |
Actual data cannot be proposed for a sub-operation | Space: object requires documentation | |
491 | ![]() |
Profile &1 has already been created | Space: object requires documentation | |
492 | ![]() |
User settings could not be deleted | Space: object requires documentation | |
493 | ![]() |
User settings have been deleted | Space: object requires documentation | |
494 | ![]() |
Select a language | Space: object requires documentation | |
495 | ![]() |
Customer enhancement is not yet active | Space: object requires documentation | |
496 | ![]() |
Confirmation profile used: &1 | Space: object requires documentation | |
497 | ![]() |
Detail area in area &1 and area &2 selected twice | Space: object requires documentation | |
498 | ![]() |
Attention: Transferred goods movements are not adjusted! | Space: object requires documentation | |
499 | ![]() |
Enter confirmation number or order/sequence/phase/secondary resource | The short text describes the object sufficiently | |
500 | ![]() |
Enter confirmation number or order/sequence/phase before saving | Space: object requires documentation | |
501 | ![]() |
First enter confirmation number of order/sequence/phase | The short text describes the object sufficiently | |
502 | ![]() |
Check of detail areas without errors | The short text describes the object sufficiently | |
503 | ![]() |
Order not suitable for transaction &2; F4 help not possible | Space: object requires documentation | |
504 | ![]() |
Quantity layout &1 does not exist | The short text describes the object sufficiently | |
505 | ![]() |
Enter a shift grouping | The short text describes the object sufficiently | |
506 | ![]() |
Enter a quantity layout | The short text describes the object sufficiently | |
507 | ![]() |
Enter a proposal type for determination of the shift group | The short text describes the object sufficiently | |
508 | ![]() |
Enter a proposal type for determination of a quantity layout | The short text describes the object sufficiently | |
509 | ![]() |
Enter a proposal type to show customer fields | The short text describes the object sufficiently | |
510 | ![]() |
Not possible to save confirmation (Choose Enter) | Space: object requires documentation | |
511 | ![]() |
Detail area WIP batch not selectable (Customizing not active) | Space: object requires documentation | |
512 | ![]() |
No entry exists for transaction & in table T158 | ||
513 | ![]() |
Entries for transaction & are missing in table T158B | ||
514 | ![]() |
An application for posting goods movements is already active | Space: object requires documentation | |
515 | ![]() |
Set one indicator for the time unit proposal | ||
516 | ![]() |
Future change records for background processing exist for order & | Space: object requires documentation | |
517 | ![]() |
Future change records for background processing exist for order & | Space: object requires documentation | |
518 | ![]() |
Enter just one indicator for the screen control | ||
519 | ![]() |
Scrap for order &1 in plant &2 must not be confirmed | Space: object requires documentation | |
520 | ![]() |
**** Messages for ALV Grids in Reprocessing Transactions **** | The short text describes the object sufficiently | |
521 | ![]() |
All confirmations are being read - limit selection | The short text describes the object sufficiently | |
522 | ![]() |
Select at least one option | Space: object requires documentation | |
523 | ![]() |
No postprocessing records found | The short text describes the object sufficiently | |
524 | ![]() |
Overview was updated | The short text describes the object sufficiently | |
525 | ![]() |
Future chnge rec. does not come from a confirmation, display not possible | Space: object requires documentation | |
526 | ![]() |
Future change rec. comes from repetitive manufact.; display not possible | The short text describes the object sufficiently | |
527 | ![]() |
Select at least one goods movement | The short text describes the object sufficiently | |
528 | ![]() |
Select one goods movement only | The short text describes the object sufficiently | |
529 | ![]() |
Deletion flag is active, therefore this function is not possible | The short text describes the object sufficiently | |
530 | ![]() |
Detail display is only available for preselected goods movements | Space: object requires documentation | |
531 | ![]() |
No goods movements were determined for the selected objects | The short text describes the object sufficiently | |
532 | ![]() |
Error records does not originate from a confirmation, no display possible | Space: object requires documentation | |
533 | ![]() |
Storage location could not be changed for all selected entries | The short text describes the object sufficiently | |
534 | ![]() |
Choose one selection option | ||
535 | ![]() |
Choose a valid line | ||
536 | ![]() |
Choose one parameter | ||
537 | ![]() |
Termin.: DELETE Tab. &: Of & records, & records have been updated | ||
538 | ![]() |
Termin.: INSERT Tab. &: Of & records, & records have been updated | ||
539 | ![]() |
Termin.: UPDATE Tab. &: Of & records, & records have been updated | ||
540 | ![]() |
Invalid call of a method for confirmation | Space: object requires documentation | |
541 | ![]() |
DELETE Table &: & records posted successfully from & records | The short text describes the object sufficiently | |
542 | ![]() |
INSERT table &: & records posted successfully from & records | The short text describes the object sufficiently | |
543 | ![]() |
CHANGE table &: & records posted successfully from & records | The short text describes the object sufficiently | |
544 | ![]() |
Terminated because of error in SAP enhancement & | Space: object requires documentation | |
545 | ![]() |
*** System message: & | ||
546 | ![]() |
*** System Message: & & & & | The short text describes the object sufficiently | |
547 | ![]() |
Confirmation is posted twice for & &; SUBRC = & | Space: object requires documentation | |
548 | ![]() |
Conversion program finished: no conversion of status 'withdrawal failed' | Space: object requires documentation | |
549 | ![]() |
& System status 'withdrawal failed' converted successfully | Space: object requires documentation |
History
Last changed on/by | ![]() |
20131127 | SAP |
SAP Release Created in |