SAP ABAP Message Class K0 (Error Messages for Central Controlling Routines)

Basic Data

Hierarchy

☛ BBPCRM (Software Component) BBPCRM
   ⤷ CRM (Application Component) Customer Relationship Management
     ⤷ CRM_APPLICATION (Package) All CRM Components Without Special Structure Packages
       ⤷ KBAS (Package) Overhead Cost Controlling

Attributes

Message class	K0
Short Description	Error Messages for Central Controlling Routines
Changed On	19930806
Last Changed At	133738

Messages

#	Message	Message Short Text	Documentation status	Authorization check
1	000	************ Start of general CO routines ********************		☐
2	009	OK code & for transaction unknown		☐
3	01	Please maintain Table &. Entry & & does not exist.		☐
4	010	Different fiscal year ends in allocated company codes	Space: object requires documentation	☐
5	011	No entry in table 009 with key &		☐
6	02	Material & does not exist in plant &		☐
7	03	WIP location & does not exist		☐
8	030	Exchange rate & / & / & not in Table &		☐
9	031	Transferred field > 9 or < 2 BYTE		☐
10	04	Plant & does not exist		☐
11	05	You must select a number less than the total number of containers		☐
12	050	Error during number assignment for number range object & interval &		☐
13	051	Automatic field modification is not supported for table &		☐
14	052	Fiscal year is invalid.	Space: object requires documentation	☐
15	053	No object number passed to Controlling object	Space: object requires documentation	☐
16	06	& does not exist. Please check this entry.		☐
17	07	Control key & does not exist in plant &		☐
18	08	Control cycle & & & does not exist		☐
19	09	Control cycle & & & already exists		☐
20	10	Control cycle & & & will be created		☐
21	100	************* Start of CO hierarchy maintenance **************		☐
22	101	You may only select one type		☐
23	102	You may ONLY select one type		☐
24	103	Group & is already defined		☐
25	104	Name & already assigned in this group		☐
26	105	Group & does not exist		☐
27	106	Group & refers to &		☐
28	107	The highest group level & has been reached		☐
29	108	Sub-hierarchy & must not be changed		☐
30	109	Node cannot be attached under node &		☐
31	11	Object & does not exist		☐
32	110	Entry & is not on lowest level		☐
33	111	The name & has an invalid format.		☐
34	112	The name must not start with this special character .		☐
35	113	Masking indicators '+' and '*' are not allowed.		☐
36	114	Entry & contains dependent values		☐
37	115	& blocked (& &/User &)		☐
38	116	System block error --> Contact system programming		☐
39	117	No useful group maintenance possible for node &		☐
40	118	Single value & does not exist in the group.		☐
41	119	The lower limit (&) exceeds the upper limit (&)		☐
42	12	Number range & for object & does not exist		☐
43	120	Controlling area & does not exist		☐
44	121	Value maintenance not allowed ->&		☐
45	122	You cannot copy & --> Single values		☐
46	125	You are not authorized to maintain groups		☐
47	126	You are not authorized to maintain group &		☐
48	127	Set of values of node & not explicit		☐
49	128	Type of old node & not correct		☐
50	129	Node & does not exist.		☐
51	13	Number range & will soon be exceeded		☐
52	130	Node & is used in itself.		☐
53	131	Name & is assigned twice.		☐
54	132	Fields are different: & <> &		☐
55	133	Incorrect group type		☐
56	134	Incorrect formula		☐
57	135	Incorrect interval in the set of values of &		☐
58	136	Incorrect attachment in a multi-field group		☐
59	137	Field assigned twice		☐
60	138	Variable does not exist		☐
61	139	Variable belongs to incorrect table		☐
62	14	Number range & has been exceeded		☐
63	140	Group changed / created		☐
64	141	Variable has incorrect type		☐
65	142	Initial value # is not included in group & .		☐
66	144	Field & too long. Max.length : &		☐
67	145	Entry not explicit: & - &		☐
68	146	Entry already exists in group &: & - &		☐
69	148	Caution ! Changes were carried out		☐
70	15	No all containers are empty. Control cycle cannot be deleted		☐
71	150	No further multi-field group may be used.		☐
72	151	A sub-hierarchy already exists for the field &.		☐
73	152	Group & does not fit to field &.		☐
74	153	Group & already assigned to & &.		☐
75	154	Data sets must not be selected when inserting.		☐
76	155	"Full display" mode activated		☐
77	156	"Multi-level display" activated		☐
78	157	Group & contains errors		☐
79	158	The errors were corrected		☐
80	159	Enter an item hierarchy or a group		☐
81	16	Control cycle & & & will be deleted		☐
82	160	Group & is not correctly stored in the data base		☐
83	161	& &: Assigned node & does not exist		☐
84	162	& &: Standard hierarchy does not contain node &		☐
85	163	& &: missing in assigned node &		☐
86	164	& &: is contained in unassigned node &		☐
87	165	Standard hierarchy &: contains interval & through &		☐
88	166	Standard hierarchy & could not be regenerated		☐
89	167	The line contains no objects		☐
90	168	Maximum allowed hierarchy depth (&) exceeded		☐
91	169	This function is not possible for values		☐
92	17	No changes were made		☐
93	170	Variable & does not fit &		☐
94	171	Values can only be maintained for end nodes		☐
95	172	No valid master record exists for & (&/&)		☐
96	173	The interval & - & does not contain any master records (&/&)		☐
97	174	The line does not contain any master data		☐
98	175	An initial value already exists in group &		☐
99	177	Group & includes master data (&).		☐
100	18	Reference does not exist		☐
101	180	Position cursor on an entry		☐
102	183	Invalid access of function module 'ZZ_HIERARRCHY_COPY'		☐
103	184	Select subtree to be deleted	Space: object requires documentation	☐
104	185	Group & for data base & does not exist		☐
105	186	Error in open to File &		☐
106	187	No node marked for transfer		☐
107	188	Node & has been deleted		☐
108	189	Standard hierarchy & in CO area & has been deleted		☐
109	19	Please define reference completely		☐
110	190	Node & cannot be deleted		☐
111	191	Sub-hierarchy & cannot be deleted		☐
112	192	Node & already exists		☐
113	193	Node & already exists		☐
114	194	You cannot enter groups that already exist		☐
115	195	No assignment has been made to node &		☐
116	196	No standard hierarchy has been created for CO area &		☐
117	197	Group & is not assigned to &		☐
118	198	Group & was only used locally before		☐
119	199	Caution! You are exporting standard hierarchy &		☐
120	20	Control cycle & & & will be changed		☐
121	200	Caution! Import is taking place		☐
122	201	This function is not supported for data field groups or multi-field grps		☐
123	202	Type conflict in group &		☐
124	203	Group & does not exist in source client &		☐
125	204	Specify an output file	Space: object requires documentation	☐
126	205	Source client (&) is the same as the current client		☐
127	206	Enter a source client	Space: object requires documentation	☐
128	207	No chart of accounts has been assigned to the set controlling area &		☐
129	208	Entry help has not been activated		☐
130	209	Name used more than once: &		☐
131	21	Please specify the strategy first		☐
132	210	Different search fields: & <> &		☐
133	211	You cannot insert nodes in CO groups		☐
134	212	Group & is not a CO group		☐
135	213	Select at least one use	Space: object requires documentation	☐
136	214	User & is processeing group &		☐
137	215	Number of groups whose sengle values have not been sorted: &		☐
138	216	Number of group texts not changed: &		☐
139	217	The groups (Type: &) are already being processed by user &		☐
140	218	Initial value # is not valid here.		☐
141	219	Group & is already included in group &.		☐
142	22	No.of containers not equal to control cycle data; data will be changed		☐
143	220	Groups appearing repeatedly: >>> & <<<		☐
144	221	Group & is removed but not deleted.		☐
145	222	The matchcode standard hierarchy is not allowed in group maintenance.		☐
146	223	Warning: Differing charts of accounts (& - &).		☐
147	224	Group & belongs to field &.		☐
148	23	A control cycle must contain at least 2 containers		☐
149	24	Container & & does not exist. Please check entry		☐
150	240	*****************End CO hierarchy maintenance ******************		☐
151	25	Status & cannot be changed to status &		☐
152	26	Container already has status &		☐
153	27	The container status will be changed		☐
154	28	No kanban items exist		☐
155	29	Container quantities & are not equal to the goods receipt quantity &		☐
156	30	Only one entry allowed for WIP location, respons. person or stge location		☐
157	31	Responsible person, & is not responsible for any control cycle		☐
158	32	Production version & does not exist for material & in plant &		☐
159	33	Storage location & / & / & does not exist		☐
160	34	Storage location & in plant & does not exist		☐
161	35	Purchasing organization and vendor must be maintained together		☐
162	36	Purch.organization and vendor must be maintained when entering contract		☐
163	37	Contract number and item must be maintained together		☐
164	38	Please enter cost center		☐
165	39	Cost center & does not exist or is not valid		☐
166	40	Material & cannot be planned in storage location &		☐
167	41	Please position the cursor on a control cycle or a container		☐
168	42	No WIP location has been assigned to storage location &		☐
169	43	Data cannot be blocked (system error)		☐
170	44	Data blocked by another user		☐
171	45	Control cycle has already been created by another user		☐
172	46	Select first function for marked container		☐
173	47	Please place cursor on a container		☐
174	48	Please place cursor on a control cycle		☐
175	49	Control cycle data must be saved first		☐
176	50	Container & does not exist		☐
177	51	Container & is blocked		☐
178	52	Container & is error free		☐
179	53	Flag the container for deletion or increase the number of containers		☐
180	54	No storage location exists in plant & in the specified area		☐
181	55	No responsible person exists in plant & in the specified area		☐
182	56	No WIP location exists in plant & in the specified area		☐
183	57	No in-house production strategy exists in plant & in the specified area		☐
184	58	No external replenishment strategy exists in plant & in specified area		☐
185	59	No stock transfer strategy exists in plant & in the specified area		☐
186	60	In-house production strategy & does not exist in plant &		☐
187	61	External replenishment strategy & does not exists in plant &		☐
188	62	Stock transfer strategy & does not exist in plant &		☐
189	63	Please place the cursor on a valid line		☐
190	64	Please maintain entry & in Table T457T		☐
191	65	The selected error messages will be deleted		☐
192	66	Purchasing organization & does not exist		☐
193	67	Vendor & does not exist		☐
194	68	No valid replenishment source could be determined via the source list		☐
195	69	Please enter control cycle no. or material, plant, and WIP location		☐
196	70	Status 9 (container incorrect) is not allowed here		☐
197	71	No scheduling agreement could be found		☐
198	72	Post kanban signal with "Save"		☐
199	73	Container is free of error! Signal not possible.		☐
200	74	Container is blocked. Replenishment will not be triggered !		☐
201	75	Dynamic storage bin: no entry for the storage bin		☐
202	76	Storage type & / & does not exist		☐
203	78	Do not enter a prod.version for control profile with quota arrangement		☐
204	79	Control profile is not a kanban control profile !		☐
205	80	Control cycles of the WM-PP interface cannot be processed here		☐
206	800	******************Begin Action Log, CO Collective Processing*************		☐
207	801	Processing ended - all object were free of errors.		☐
208	802	Processing ended - errors occured in & objects.		☐
209	81	No address has been maintained		☐
210	82	Function code handling is not coded for screen		☐
211	83	Control cycle from WM/PP cannot be processed here		☐
212	84	Kanban control cycle cannot be processed here		☐
213	85	No authorization for created control cycles in plant &		☐
214	86	No authorization for changing control cycles in plant &		☐
215	87	No authorization for displaying kanban data in plant &		☐
216	88	No authorization for correcting containers in plant &		☐
217	89	No authorization for triggering kanban signal in plant &		☐
218	899	************** End of general CO routines *********************		☐
219	90	Only control cycles for the WM-PP interface can be processed		☐
220	91	Please enter a storage location or the indicator		☐
221	92	Dynamic coordinates not supported for container parts		☐
222	93	Dynamic coordinates not supported for release order parts		☐
223	94	Stge loc. for WIP loc. not managed by WM. Only use section ind. '0'		☐
224	95	For WM displays, only use indicators '0', '1', '2', or '3'		☐
225	96	Control profile is no WM control cycle for replenishment		☐
226	97	Reference control cycle is not a WM control cycle for replenishment		☐
227	98	Initial material staging indicator is not allowed		☐
228	99	Dynamic storage bins also require the entry of a storage type		☐

History

Last changed on/by	19930806	SAP
SAP Release Created in