Where Used List (Function Module) for SAP ABAP Table QABWR (Interface table with data for valuation procedures)
SAP ABAP Table
QABWR (Interface table with data for valuation procedures) is used by
# | Object Type | Object Name | Object Description | Package | Structure Package | Software Component |
---|---|---|---|---|---|---|
![]() |
![]() |
![]() |
![]() |
![]() |
||
1 | ![]() |
/SAPHT/SPC_C_SHEWHART_40
|
Algorithms for c chart with sigma limits (SAP 4.0B version) | ![]() |
![]() |
![]() |
2 | ![]() |
/SAPHT/SPC_PCT_NONCONFORM_UNIT VALUE(QABWR) LIKE QABWR
|
Valuation by fraction of nonconforming units | ![]() |
![]() |
![]() |
3 | ![]() |
/SAPHT/SPC_PCT_NONCONFORM_UNIT
|
Valuation by fraction of nonconforming units | ![]() |
![]() |
![]() |
4 | ![]() |
/SAPHT/SPC_P_CHART_EQUIP
|
Algorithms for p chart by equipment | ![]() |
![]() |
![]() |
5 | ![]() |
/SAPHT/SPC_P_CHART_VARYLIM
|
Algorithms for p chart with varying limits | ![]() |
![]() |
![]() |
6 | ![]() |
/SAPHT/SPC_P_SHEWHART_40
|
Algorithms for p chart with sigma limits (SAP 4.0A version) | ![]() |
![]() |
![]() |
7 | ![]() |
/SAPHT/SPC_U_CHART_VARYLIM
|
Algorithms for u chart with varying limits | ![]() |
![]() |
![]() |
8 | ![]() |
/SAPHT/SPC_VALUATION VALUE(QABWR) LIKE QABWR
|
Valuation by control chart action limits | ![]() |
![]() |
![]() |
9 | ![]() |
/SAPHT/SPC_VALUATION
|
Valuation by control chart action limits | ![]() |
![]() |
![]() |
10 | ![]() |
/SAPHT/SPC_WEST_ELECTRIC_RULES
|
Check the Western Electric Rules | ![]() |
![]() |
![]() |
11 | ![]() |
/SAPHT/SPC_YLD_LOSS_EQ_VARYLIM
|
Algorithms for normalized yield loss by equipment with varying limits | ![]() |
![]() |
![]() |
12 | ![]() |
/SAPHT/SPC_ZERO_DEFECTS VALUE(QABWR) LIKE QABWR
|
Acceptance with 0 defects | ![]() |
![]() |
![]() |
13 | ![]() |
/SAPHT/SPC_ZERO_DEFECTS
|
Acceptance with 0 defects | ![]() |
![]() |
![]() |
14 | ![]() |
QEBRMS_CONVERT_UNITS REFERENCE(E_QABWR) LIKE QABWR
|
Konvertiert Maßeinheiten von Merkmalsvorgaben bei Bewerten nach Mult. Spez | ![]() |
![]() |
![]() |
15 | ![]() |
QEBRMS_CONVERT_UNITS
|
Konvertiert Maßeinheiten von Merkmalsvorgaben bei Bewerten nach Mult. Spez | ![]() |
![]() |
![]() |
16 | ![]() |
QEBRMS_VALUATION_MS
|
Bewertung nach Multipler Spezifikation | ![]() |
![]() |
![]() |
17 | ![]() |
QEBRMS_VALUATION_MS VALUE(QABWR) LIKE QABWR
|
Bewertung nach Multipler Spezifikation | ![]() |
![]() |
![]() |
18 | ![]() |
QEBR_BEST_CASE_VALUATION_GT_1 VALUE(QABWR) TYPE QABWR
|
Char. valtn with independent multiple samples acc. to BEST of n principle | ![]() |
![]() |
![]() |
19 | ![]() |
QEBR_BEST_CASE_VALUATION_GT_1
|
Char. valtn with independent multiple samples acc. to BEST of n principle | ![]() |
![]() |
![]() |
20 | ![]() |
QEBR_BUILD_QABWR REFERENCE(IV_DYNPCALL) TYPE QABWR-DYNPCALL
|
Standard-Bewertungsschnittstelle bei Einfachproben füllen | ![]() |
![]() |
![]() |
21 | ![]() |
QEBR_BUILD_QABWR REFERENCE(IV_IDICALL) TYPE QABWR-IDICALL
|
Standard-Bewertungsschnittstelle bei Einfachproben füllen | ![]() |
![]() |
![]() |
22 | ![]() |
QEBR_BUILD_QABWR
|
Standard-Bewertungsschnittstelle bei Einfachproben füllen | ![]() |
![]() |
![]() |
23 | ![]() |
QEBR_BUILD_QABWR REFERENCE(IV_SCHLCODE) TYPE QABWR-SCHLCODE
|
Standard-Bewertungsschnittstelle bei Einfachproben füllen | ![]() |
![]() |
![]() |
24 | ![]() |
QEBR_BUILD_QABWR REFERENCE(ES_QABWR) TYPE QABWR
|
Standard-Bewertungsschnittstelle bei Einfachproben füllen | ![]() |
![]() |
![]() |
25 | ![]() |
QEBR_CODE_VALUATION
|
Valuation of a characteristic/sample by attribute code | ![]() |
![]() |
![]() |
26 | ![]() |
QEBR_CODE_VALUATION VALUE(QABWR) TYPE QABWR
|
Valuation of a characteristic/sample by attribute code | ![]() |
![]() |
![]() |
27 | ![]() |
QEBR_CONTROL_LIMITS_VALUATION
|
Valuation according to action limizts of a control chart | ![]() |
![]() |
![]() |
28 | ![]() |
QEBR_CONTROL_LIMITS_VALUATION VALUE(QABWR) TYPE QABWR
|
Valuation according to action limizts of a control chart | ![]() |
![]() |
![]() |
29 | ![]() |
QEBR_DEP_MULT_SAMPLING VALUE(QABWR) TYPE QABWR
|
Valuation for dependent multiple samples | ![]() |
![]() |
![]() |
30 | ![]() |
QEBR_DEP_MULT_SAMPLING
|
Valuation for dependent multiple samples | ![]() |
![]() |
![]() |
31 | ![]() |
QEBR_DUMMY_FUNCTION_MODULE VALUE(QABWR) TYPE QABWR
|
Dummy function module for valuation rules | ![]() |
![]() |
![]() |
32 | ![]() |
QEBR_FAILURE_OR_MANUAL VALUE(QABWR) TYPE QABWR
|
Valuation according to number of defects or manual valuation | ![]() |
![]() |
![]() |
33 | ![]() |
QEBR_FAILURE_OR_MANUAL
|
Valuation according to number of defects or manual valuation | ![]() |
![]() |
![]() |
34 | ![]() |
QEBR_FAILURE_VALUATION VALUE(QABWR) TYPE QABWR
|
Valuation based on the number of defects | ![]() |
![]() |
![]() |
35 | ![]() |
QEBR_FAILURE_VALUATION
|
Valuation based on the number of defects | ![]() |
![]() |
![]() |
36 | ![]() |
QEBR_LAST_SAMPLE_VALUATION
|
Valuation of characs. with multiple samples based on the last sample | ![]() |
![]() |
![]() |
37 | ![]() |
QEBR_LAST_SAMPLE_VALUATION VALUE(QABWR) TYPE QABWR
|
Valuation of characs. with multiple samples based on the last sample | ![]() |
![]() |
![]() |
38 | ![]() |
QEBR_MANUELL_VALUATION VALUE(QABWR) TYPE QABWR
|
Manual valuation | ![]() |
![]() |
![]() |
39 | ![]() |
QEBR_MANUELL_VALUATION
|
Manual valuation | ![]() |
![]() |
![]() |
40 | ![]() |
QEBR_MEAN_VALUE_TOLERANCE_INSP VALUE(QABWR) TYPE QABWR
|
Valuation of mean value within tolerance limits | ![]() |
![]() |
![]() |
41 | ![]() |
QEBR_MEAN_VALUE_TOLERANCE_INSP
|
Valuation of mean value within tolerance limits | ![]() |
![]() |
![]() |
42 | ![]() |
QEBR_NONCONFORM_UNIT_OR_MANUAL VALUE(QABWR) TYPE QABWR
|
Valuation of number of nonconforming units or manual valuation | ![]() |
![]() |
![]() |
43 | ![]() |
QEBR_NONCONFORM_UNIT_OR_MANUAL
|
Valuation of number of nonconforming units or manual valuation | ![]() |
![]() |
![]() |
44 | ![]() |
QEBR_NONCONFORM_UNIT_VALUATION
|
Valuation of the number of nonconforming units | ![]() |
![]() |
![]() |
45 | ![]() |
QEBR_NONCONFORM_UNIT_VALUATION VALUE(QABWR) TYPE QABWR
|
Valuation of the number of nonconforming units | ![]() |
![]() |
![]() |
46 | ![]() |
QEBR_S_METHOD_COMBINED_LIMITS
|
Variable insp. by s method for two limits and normal distribution | ![]() |
![]() |
![]() |
47 | ![]() |
QEBR_S_METHOD_COMBINED_LIMITS VALUE(QABWR) TYPE QABWR
|
Variable insp. by s method for two limits and normal distribution | ![]() |
![]() |
![]() |
48 | ![]() |
QEBR_S_METHOD_VALUATION
|
Valuation by s method for variable inspection (single-sided) | ![]() |
![]() |
![]() |
49 | ![]() |
QEBR_S_METHOD_VALUATION VALUE(QABWR) TYPE QABWR
|
Valuation by s method for variable inspection (single-sided) | ![]() |
![]() |
![]() |
50 | ![]() |
QEBR_WORST_CASE_VALUATION VALUE(QABWR) TYPE QABWR
|
Valtn of characs with independent multiple samples by WORST-CASE principle | ![]() |
![]() |
![]() |
51 | ![]() |
QEBR_WORST_CASE_VALUATION
|
Valtn of characs with independent multiple samples by WORST-CASE principle | ![]() |
![]() |
![]() |
52 | ![]() |
QEBR_ZERO_NONCONFORM_UNIT
|
Acceptance based on 0 nonconforming units | ![]() |
![]() |
![]() |
53 | ![]() |
QEBR_ZERO_NONCONFORM_UNIT VALUE(QABWR) TYPE QABWR
|
Acceptance based on 0 nonconforming units | ![]() |
![]() |
![]() |
54 | ![]() |
QRKD_COMPARE_WITH_LIMITS VALUE(I_QABWR) LIKE QABWR
|
Valuation of a sample by comparison with the control limits | ![]() |
![]() |
![]() |
55 | ![]() |
QRKD_COMPARE_WITH_LIMITS
|
Valuation of a sample by comparison with the control limits | ![]() |
![]() |
![]() |
56 | ![]() |
QRKD_VIOLATION_ACTION_LIMITS
|
Check, whether action-limits are violated | ![]() |
![]() |
![]() |
57 | ![]() |
QRKT_C_SHEWHART
|
Algorithms for c-chart with sigma limits | ![]() |
![]() |
![]() |
58 | ![]() |
QRKT_MEAN_VALUE_ACCEPTANCE
|
Algorithms for acceptance chart for x-bar with internal dispersion | ![]() |
![]() |
![]() |
59 | ![]() |
QRKT_MEAN_VALUE_ACCEPTANCE_2
|
Algorithms for acceptance chart for x-bar with overall dispersion | ![]() |
![]() |
![]() |
60 | ![]() |
QRKT_MEAN_VALUE_SHEWHART
|
Algorithms in Shewhart chart for x-bar with internal dispersion | ![]() |
![]() |
![]() |
61 | ![]() |
QRKT_MEAN_VALUE_SHEWHART_2
|
Algorithms: Shewhart chart for x-bar with overall dispersion | ![]() |
![]() |
![]() |
62 | ![]() |
QRKT_MEAN_VALUE_SHEWHART_R2
|
Algorithms in Shewhart chart for x-bar with dispers. over moving range | ![]() |
![]() |
![]() |
63 | ![]() |
QRKT_NP_SHEWHART
|
Algorithms for np-chart with sigma limits | ![]() |
![]() |
![]() |
64 | ![]() |
QRKT_P_SHEWHART
|
Algorithms for p-chart with sigma limits | ![]() |
![]() |
![]() |
65 | ![]() |
QRKT_RANGE_SHEWHART
|
Algorithmen zur Shewhart-Karte für Range mit innerer Streuung | ![]() |
![]() |
![]() |
66 | ![]() |
QRKT_STD_DEVIATION_SHEWHART
|
Algorithms for Shewhart chart for s with internal dispersion and mean line | ![]() |
![]() |
![]() |
67 | ![]() |
QRKT_STD_DEVIATION_SHEWHART_2
|
Algorithms for Shewhart chart for s with overall dispersion and mean line | ![]() |
![]() |
![]() |
68 | ![]() |
QRKT_U_SHEWHART
|
Algorithms for u-chart with sigma limits | ![]() |
![]() |
![]() |