Where Used List (Function Module) for SAP ABAP Data Element UPC_Y_PLEVEL (Planning level)
SAP ABAP Data Element UPC_Y_PLEVEL (Planning level) is used by
# | Object Type | Object Name | Object Description | Package | Structure Package | Software Component |
---|---|---|---|---|---|---|
1 | Function Module |
/MAP/F_FCAST_EXEC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
MAP: Durchführung Vermindern / Anreichern | /MAP/F | RS_BCT_STRUPAK | BI_CONT |
2 | Function Module |
/MAP/F_FCAST_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
MAP: Initialisierung Vermindern / Anreichern | /MAP/F | RS_BCT_STRUPAK | BI_CONT |
3 | Function Module |
/MAP/M_SH_KYFNM_LEV
|
MAP: Suchhilfe für Kennzahl-Infoobjects nach Planungsebene | /MAP/M | RS_BCT_STRUPAK | BI_CONT |
4 | Function Module |
API_SEMBPS_ADHOCPACKAGE_SET VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Set Ad Hoc Package | UPC | RS_BW_STRUPAK | SAP_BW |
5 | Function Module |
API_SEMBPS_FUNCTION_EXECUTE VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Execute Planning Function | UPC | RS_BW_STRUPAK | SAP_BW |
6 | Function Module |
API_SEMBPS_GETDATA VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Read Planning Data | UPC | RS_BW_STRUPAK | SAP_BW |
7 | Function Module |
API_SEMBPS_LAYOUT_GETDETAIL VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Detail Information on Planning Layout | UPC | RS_BW_STRUPAK | SAP_BW |
8 | Function Module |
API_SEMBPS_PACKAGE_GETDETAIL VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Read Detail on a Planning Package | UPC | RS_BW_STRUPAK | SAP_BW |
9 | Function Module |
API_SEMBPS_PLANSTRUCTURE_GET
|
Read Plan Structure | UPC | RS_BW_STRUPAK | SAP_BW |
10 | Function Module |
API_SEMBPS_PLANSTRUCTURE_GET VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL OPTIONAL
|
Read Plan Structure | UPC | RS_BW_STRUPAK | SAP_BW |
11 | Function Module |
API_SEMBPS_PLEVEL_GETDETAIL VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Read Detail on a Planning Level | UPC | RS_BW_STRUPAK | SAP_BW |
12 | Function Module |
API_SEMBPS_SEQUENCE_EXECUTE VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Execute Planning Sequence | UPC | RS_BW_STRUPAK | SAP_BW |
13 | Function Module |
API_SEMBPS_SETDATA VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Write Plan Data into the Buffer | UPC | RS_BW_STRUPAK | SAP_BW |
14 | Function Module |
BPREP_BW_CALC_CALC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Obsolet - Berechnen des HR-Ergebnisses | UPYC | RS_BCT_STRUPAK | BI_CONT |
15 | Function Module |
BPREP_BW_CALC_CALC_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Obsolet - Berechnen des HR-Ergebnisses | UPYC | RS_BCT_STRUPAK | BI_CONT |
16 | Function Module |
BPREP_BW_CALC_CLEAN_UP REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Obsolet - Rücksetzen der globalen Tabellen | UPYC | RS_BCT_STRUPAK | BI_CONT |
17 | Function Module |
BPREP_BW_CALC_DERIVE_BCARRIER REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Obsolet - Ermittlung des Budgetträgers und Fortschreibung auf FM-Cube | UPYC | RS_BCT_STRUPAK | BI_CONT |
18 | Function Module |
BPREP_BW_CALC_DERIVE_FM REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Obsolet - Ableitung FM-Dimensionen u. Fortschreibung des HR-Ergebnis Cubes | UPYC | RS_BCT_STRUPAK | BI_CONT |
19 | Function Module |
BPREP_BW_CALC_DUMMY REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Obsolet - Platzhalterbaustein ohne Funktion | UPYC | RS_BCT_STRUPAK | BI_CONT |
20 | Function Module |
BPREP_BW_CALC_INIT_BC_DERIVE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Obsolet - Initialisierung für Ableitung des Budgetträgers | UPYC | RS_BCT_STRUPAK | BI_CONT |
21 | Function Module |
BPREP_BW_CALC_INIT_DERIVE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Obsolet - Initialisierung für die Ableitung der FM-Dimensionen | UPYC | RS_BCT_STRUPAK | BI_CONT |
22 | Function Module |
BPREP_BW_CALC_INIT_PAI REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Obsolet - Ermittlung der Änderungen auf dem Layout | UPYC | RS_BCT_STRUPAK | BI_CONT |
23 | Function Module |
BPREP_BW_CALC_INIT_PBO REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Obsolet - Ermittlung des Ausgangszustands | UPYC | RS_BCT_STRUPAK | BI_CONT |
24 | Function Module |
BPREP_BW_CALC_READ REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Obsolet - Ermittlung des Inhalts der abhängigen Daten | UPYC | RS_BCT_STRUPAK | BI_CONT |
25 | Function Module |
BPREP_BW_CALC_READ_INITIAL REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Obsolet - Ermittlung des Inhalts der abhängigen Daten für initialen Lauf | UPYC | RS_BCT_STRUPAK | BI_CONT |
26 | Function Module |
DEQUEUE_E_UPC_FM VALUE(PLEVEL) TYPE UPC_FIXED_METHOD-PLEVEL OPTIONAL
|
Release lock on object E_UPC_FM | $ENQ | LOCAL | |
27 | Function Module |
DEQUEUE_E_UPC_PACKAGE VALUE(PLEVEL) TYPE UPC_PACKAGE-PLEVEL OPTIONAL
|
Release lock on object E_UPC_PACKAGE | $ENQ | LOCAL | |
28 | Function Module |
DEQUEUE_E_UPC_PLEVEL VALUE(PLEVEL) TYPE UPC_PLEVEL-PLEVEL OPTIONAL
|
Release lock on object E_UPC_PLEVEL | $ENQ | LOCAL | |
29 | Function Module |
DEQUEUE_E_UPE_PARAM VALUE(PLEVEL) TYPE UPE_PARAM-PLEVEL OPTIONAL
|
Release lock on object E_UPE_PARAM | $ENQ | LOCAL | |
30 | Function Module |
DEQUEUE_E_UPE_PARAM_ABC VALUE(PLEVEL) TYPE UPE_PARAM_ABC-PLEVEL OPTIONAL
|
Release lock on object E_UPE_PARAM_ABC | $ENQ | LOCAL | |
31 | Function Module |
DEQUEUE_E_UPF_BUNDLE VALUE(PLEVEL) TYPE UPF_BUNDLE-PLEVEL OPTIONAL
|
Release lock on object E_UPF_BUNDLE | $ENQ | LOCAL | |
32 | Function Module |
DEQUEUE_E_UPF_PARAM VALUE(PLEVEL) TYPE UPF_PARAM-PLEVEL OPTIONAL
|
Release lock on object E_UPF_PARAM | $ENQ | LOCAL | |
33 | Function Module |
DEQUEUE_E_UPF_PLANF VALUE(PLEVEL) TYPE UPF_PLANF-PLEVEL OPTIONAL
|
Release lock on object E_UPF_PLANF | $ENQ | LOCAL | |
34 | Function Module |
ENQUEUE_E_UPC_FM VALUE(PLEVEL) TYPE UPC_FIXED_METHOD-PLEVEL OPTIONAL
|
Request lock for object E_UPC_FM | $ENQ | LOCAL | |
35 | Function Module |
ENQUEUE_E_UPC_PACKAGE VALUE(PLEVEL) TYPE UPC_PACKAGE-PLEVEL OPTIONAL
|
Request lock for object E_UPC_PACKAGE | $ENQ | LOCAL | |
36 | Function Module |
ENQUEUE_E_UPC_PLEVEL VALUE(PLEVEL) TYPE UPC_PLEVEL-PLEVEL OPTIONAL
|
Request lock for object E_UPC_PLEVEL | $ENQ | LOCAL | |
37 | Function Module |
ENQUEUE_E_UPE_PARAM VALUE(PLEVEL) TYPE UPE_PARAM-PLEVEL OPTIONAL
|
Request lock for object E_UPE_PARAM | $ENQ | LOCAL | |
38 | Function Module |
ENQUEUE_E_UPE_PARAM_ABC VALUE(PLEVEL) TYPE UPE_PARAM_ABC-PLEVEL OPTIONAL
|
Request lock for object E_UPE_PARAM_ABC | $ENQ | LOCAL | |
39 | Function Module |
ENQUEUE_E_UPF_BUNDLE VALUE(PLEVEL) TYPE UPF_BUNDLE-PLEVEL OPTIONAL
|
Request lock for object E_UPF_BUNDLE | $ENQ | LOCAL | |
40 | Function Module |
ENQUEUE_E_UPF_PARAM VALUE(PLEVEL) TYPE UPF_PARAM-PLEVEL OPTIONAL
|
Request lock for object E_UPF_PARAM | $ENQ | LOCAL | |
41 | Function Module |
ENQUEUE_E_UPF_PLANF VALUE(PLEVEL) TYPE UPF_PLANF-PLEVEL OPTIONAL
|
Request lock for object E_UPF_PLANF | $ENQ | LOCAL | |
42 | Function Module |
LR_UPX_KPI_KF_PLEVEL_READ2
|
Kennzahl aus anderer Planungsebene lesen | RS_BCT_CRM_FM_LR | RS_BCT_STRUPAK | BI_CONT |
43 | Function Module |
PRICE_CALCULATION REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
techn.Performance: Pricing | UPF | RS_BW_STRUPAK | SAP_BW |
44 | Function Module |
PSM_BW_FORECAST_BUDGET_CALC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
PSM Forecast für BI: Prognose der Budgetwerte | UPYC_B | RS_BCT_STRUPAK_B | BI_CONT |
45 | Function Module |
PSM_BW_FORECAST_BUDGET_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
PSM Forecast für BI: Prognose der Budgetwerte | UPYC_B | RS_BCT_STRUPAK_B | BI_CONT |
46 | Function Module |
RETRACT_LP_CM_EXEC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraktion: Cash management | UPB | SEM-BW | SEM-BW |
47 | Function Module |
RETRACT_LP_CM_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraktion: Cash management | UPB | SEM-BW | SEM-BW |
48 | Function Module |
RETRACT_LP_MRA_EXEC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraktion: Market Risk Analyzer | UPB | SEM-BW | SEM-BW |
49 | Function Module |
RETRACT_LP_MRA_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraktion: Market Risk Analyzer | UPB | SEM-BW | SEM-BW |
50 | Function Module |
RS_BCT_DISTRIBUTE_CHPARTNER REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Verteilung Partner | RS_BCT_TELCO_B | RS_BCT_STRUPAK_B | BI_CONT |
51 | Function Module |
RS_BCT_DISTRIBUTE_PRODUCT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Verteilung Produkt | RS_BCT_TELCO_B | RS_BCT_STRUPAK_B | BI_CONT |
52 | Function Module |
RS_BW_BCT_LR_DISTR_PLAN_FUNC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Live Rates - Rates Distribution Planning Function | RS_BCT_CRM_FM_LR | RS_BCT_STRUPAK | BI_CONT |
53 | Function Module |
RS_BW_BCT_LR_DISTR_PL_FUNC_INI REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
LiveRates-exit Plan.Func Init FM | RS_BCT_CRM_FM_LR | RS_BCT_STRUPAK | BI_CONT |
54 | Function Module |
TEMPLATE_EXIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Template for planning function of type Exit | UPF | RS_BW_STRUPAK | SAP_BW |
55 | Function Module |
TEMPLATE_EXIT_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Template for planning function type Exit - initializing module | UPF | RS_BW_STRUPAK | SAP_BW |
56 | Function Module |
UMV_BPS_FUNCTION_IS_FORMULA REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Prüft, ob BPS Funktion von Typ Formel ist | UMV | SEM-BW | SEM-BW |
57 | Function Module |
UMV_GET_FORMULA_AS_TABLE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Liefert BPS Formel in Tabellenform | UMV | SEM-BW | SEM-BW |
58 | Function Module |
UMV_GET_FORMULA_INPUT_OUTPUT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Liefert In- und Output einer BPS Formel | UMV | SEM-BW | SEM-BW |
59 | Function Module |
UMV_GET_FORMULA_TIMESTAMP REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Liefert BPS Formel in Tabellenform | UMV | SEM-BW | SEM-BW |
60 | Function Module |
UPARA_EXIT_COPY_ACTUALS REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Kopieren von Istdaten incl. Bestandsrückrechnung | UPARA | RS_BCT_STRUPAK | BI_CONT |
61 | Function Module |
UPARA_EXIT_INIT_COPY_ACTUALS REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Kopieren von Istdaten incl. Bestandsrückrechnung (Initialisierung) | UPARA | RS_BCT_STRUPAK | BI_CONT |
62 | Function Module |
UPARA_EXIT_PRP_AVRSPRD REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Kopieren von Istdaten incl. Bestandsrückrechnung | UPARA | RS_BCT_STRUPAK | BI_CONT |
63 | Function Module |
UPARA_EXIT_READ_OTB REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Lesen und Bereitstellen der OTB Plandaten | UPARA | RS_BCT_STRUPAK | BI_CONT |
64 | Function Module |
UPARA_GET_OTB_DATA REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Liest OTB Plandaten über Exit Funktion | UPARA | RS_BCT_STRUPAK | BI_CONT |
65 | Function Module |
UPARA_PLF_ASRTVRS_PRODUCT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Verteilung Umsatz gemäß Abverkaufsmuster | UPARA | RS_BCT_STRUPAK | BI_CONT |
66 | Function Module |
UPARA_PLF_ASRTVRS_PRODUCT_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Verteilung Umsatz gemäß Abverkaufsmuster | UPARA | RS_BCT_STRUPAK | BI_CONT |
67 | Function Module |
UPARS_SSM_DISTR_SLS_PATTERN REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Verteilung Umsatz gemäß Abverkaufsmuster | UPARS | RS_BCT_STRUPAK | BI_CONT |
68 | Function Module |
UPARS_SSM_DISTR_SLS_PAT_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Verteilung Umsatz gemäß Abverkaufsmuster | UPARS | RS_BCT_STRUPAK | BI_CONT |
69 | Function Module |
UPARU_GETLIST_HEADCOL REFERENCE(I_PLEVEL) TYPE UPP_ELEM-PLEVEL
|
MAP-SEM - Get Header columns list for a Planning Area | UPARU | RS_BCT_STRUPAK | BI_CONT |
70 | Function Module |
UPARU_GETLIST_KEYFIG REFERENCE(I_PLEVEL) TYPE UPP_ELEM-PLEVEL
|
MAP-SEM - Get Key Figures list for a Planning Area | UPARU | RS_BCT_STRUPAK | BI_CONT |
71 | Function Module |
UPARU_GETLIST_LEADCOL REFERENCE(I_PLEVEL) TYPE UPP_ELEM-PLEVEL
|
MAP-SEM - Get Lead columns list for a Planning Area | UPARU | RS_BCT_STRUPAK | BI_CONT |
72 | Function Module |
UPARU_TC_GET_MAP_LAYOUT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Get planning layout enhanced customizing | UPARU | RS_BCT_STRUPAK | BI_CONT |
73 | Function Module |
UPARU_UI_COMMIT_DOCUMENT VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Commit the changed documents | UPARU | RS_BCT_STRUPAK | BI_CONT |
74 | Function Module |
UPARU_UI_DELETE_ROW_CHECK VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Perform an operation on a Document in a Planning Layout | UPARU | RS_BCT_STRUPAK | BI_CONT |
75 | Function Module |
UPARU_UI_EXECUTE_DOC_FUNCT VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Perform an operation on a Document in a Planning Layout | UPARU | RS_BCT_STRUPAK | BI_CONT |
76 | Function Module |
UPARU_UI_EXECUTE_FUNCTION VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Execute a planning function | UPARU | RS_BCT_STRUPAK | BI_CONT |
77 | Function Module |
UPARU_UI_EXECUTE_SEQUENCE VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Execute a planning sequence | UPARU | RS_BCT_STRUPAK | BI_CONT |
78 | Function Module |
UPARU_UI_EXISTS_FUNCTION VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Verify if a planning function exist | UPARU | RS_BCT_STRUPAK | BI_CONT |
79 | Function Module |
UPARU_UI_EXISTS_SEQUENCE VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Verify if a planning sequence exist | UPARU | RS_BCT_STRUPAK | BI_CONT |
80 | Function Module |
UPARU_UI_GET_LAYOUT_DETAIL VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Get planning layout detail | UPARU | RS_BCT_STRUPAK | BI_CONT |
81 | Function Module |
UPARU_UI_GET_PLEVEL_DETAIL VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Get planning level detail | UPARU | RS_BCT_STRUPAK | BI_CONT |
82 | Function Module |
UPARU_UI_GET_VARIABLE_TEXT
|
Get planning variable text | UPARU | RS_BCT_STRUPAK | BI_CONT |
83 | Function Module |
UPARU_UI_GET_VARIABLE_TEXT VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL OPTIONAL
|
Get planning variable text | UPARU | RS_BCT_STRUPAK | BI_CONT |
84 | Function Module |
UPARU_UI_MASTERDATA_HELP_LIST VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL OPTIONAL
|
Get a search help value list for a specific info object | UPARU | RS_BCT_STRUPAK | BI_CONT |
85 | Function Module |
UPARU_UI_REFRESH_DATA VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Refresh planning layout data | UPARU | RS_BCT_STRUPAK | BI_CONT |
86 | Function Module |
UPARU_UI_SAVE_TEMPLATE_LOCALLY VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Transfer the SEM Layout Excel template to local PC | UPARU | RS_BCT_STRUPAK | BI_CONT |
87 | Function Module |
UPARU_UI_SEND_DATA VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Send the layout planning data to the MAP-BPS server | UPARU | RS_BCT_STRUPAK | BI_CONT |
88 | Function Module |
UPARU_VALID_CHAR_LINSDEL REFERENCE(PLEVEL) TYPE UPC_Y_PLEVEL
|
Validation of lead columns characteristics | UPARU | RS_BCT_STRUPAK | BI_CONT |
89 | Function Module |
UPARU_VALID_DISP_AFTER REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Validation of the Display After Info Object | UPARU | RS_BCT_STRUPAK | BI_CONT |
90 | Function Module |
UPARU_VALID_KYFMDIO_LATTR REFERENCE(PLEVEL) TYPE UPC_Y_PLEVEL
|
Validation of the Layout Maintenance Info Object | UPARU | RS_BCT_STRUPAK | BI_CONT |
91 | Function Module |
UPARU_VALID_KYFMDIO_MAPLAY REFERENCE(PLEVEL) TYPE UPC_Y_PLEVEL
|
Validation of the Layout Maintenance Info Object | UPARU | RS_BCT_STRUPAK | BI_CONT |
92 | Function Module |
UPARU_VALID_KYFNM REFERENCE(PLEVEL) TYPE UPC_Y_PLEVEL
|
Validation of the Key Figure Total | UPARU | RS_BCT_STRUPAK | BI_CONT |
93 | Function Module |
UPA_EXP_COMMIT
|
Execution of automatic functions assigned to layouts | UPA_EXP | SEM-BW | SEM-BW |
94 | Function Module |
UPA_MCB_EXITF_CUBE_COPY_HIST REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
MCB: Ausführung der Kopie Basis-Cube => Planungs-Cube | UPA_MCB | RS_BCT_STRUPAK | BI_CONT |
95 | Function Module |
UPA_MCB_EXITF_CUBE_COPY_ZERO REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
MCB: Ausführung der Kopie Basis-Cube => Planungs-Cube | UPA_MCB | RS_BCT_STRUPAK | BI_CONT |
96 | Function Module |
UPA_MCB_EXITF_RETRACT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
MCB: Ausführung der Kopie Basis-Cube => Planungs-Cube | UPA_MCB | RS_BCT_STRUPAK | BI_CONT |
97 | Function Module |
UPA_MCB_EXITF_SEND_CHECK REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Status prüfen: Zur Genehmigung schicken | UPA_MCB | RS_BCT_STRUPAK | BI_CONT |
98 | Function Module |
UPA_MCB_EXITF_SEND_CHECK_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Status prüfen: Zur Genehmigung schicken | UPA_MCB | RS_BCT_STRUPAK | BI_CONT |
99 | Function Module |
UPA_MCB_EXITF_SEND_SET REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Status setzten: Zur Genehmigung schicken | UPA_MCB | RS_BCT_STRUPAK | BI_CONT |
100 | Function Module |
UPA_MCB_EXITF_SEND_SET_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Status setzten: Zur Genehmigung schicken | UPA_MCB | RS_BCT_STRUPAK | BI_CONT |
101 | Function Module |
UPA_MCB_EXITF_SEND_UP REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Zur Genehmigung schicken | UPA_MCB | RS_BCT_STRUPAK | BI_CONT |
102 | Function Module |
UPA_MCB_EXITF_SEND_UP_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Zur Genehmigung schicken | UPA_MCB | RS_BCT_STRUPAK | BI_CONT |
103 | Function Module |
UPBR_DATA_MAPPING_EXIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Planungsfunktion vom Typ Exit (ALV Datenanzeige) | UPBR | RS_BCT_STRUPAK | BI_CONT |
104 | Function Module |
UPB_ALV_DATA_DISPLAY_CONFIRM VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL DEFAULT SPACE
|
Planungsanwendungen: Daten im ALV anzeigen | UPB | SEM-BW | SEM-BW |
105 | Function Module |
UPB_ALV_DATA_DISPLAY_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL DEFAULT SPACE
|
Planungsanwendungen: Daten im ALV anzeigen (Initialisierung) | UPB | SEM-BW | SEM-BW |
106 | Function Module |
UPB_ALV_EXIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Planungsfunktion vom Typ Exit (ALV Datenanzeige) | UPB | SEM-BW | SEM-BW |
107 | Function Module |
UPB_ALV_EXIT_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Planungsfunktion vom Typ Exit (ALV Datenanzeige) Initialisierungsbautstein | UPB | SEM-BW | SEM-BW |
108 | Function Module |
UPB_CCP_PP_UPDATE_EXIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Vorlage für Planungsfunktion vom Typ Exit | UPB | SEM-BW | SEM-BW |
109 | Function Module |
UPB_CCP_PP_UPDATE_EXIT_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Vorlage für Planungsfunktion vom Typ Exit - Initialisierungsbautstein | UPB | SEM-BW | SEM-BW |
110 | Function Module |
UPB_CI_PUSHBACK_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Corporate IM: Initialisierung für die Pushback Funktionen | UPBR | RS_BCT_STRUPAK | BI_CONT |
111 | Function Module |
UPB_CI_PUSHBACK_IQ REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Corporate IM: Pushback of Values to Appropriation Requests | UPBR | RS_BCT_STRUPAK | BI_CONT |
112 | Function Module |
UPB_CI_PUSHBACK_MATCH_IP REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Corporate IM: Matching and Pushback of Values to Program Positions | UPBR | RS_BCT_STRUPAK | BI_CONT |
113 | Function Module |
UPB_CI_PUSHBACK_PR REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Corporate IM: Pushback of Values to WBS Elements | UPBR | RS_BCT_STRUPAK | BI_CONT |
114 | Function Module |
UPB_CMI_AVG_DRIVERS_CALC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Calculates Driver Mean Values | UPB | SEM-BW | SEM-BW |
115 | Function Module |
UPB_CMI_AVG_SHV_CALC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Calculates SHV Based on the Driver Mean Values | UPB | SEM-BW | SEM-BW |
116 | Function Module |
UPB_CMI_DETAIL_SHV_CALC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Calculates SHV Based on Annual Values | UPB | SEM-BW | SEM-BW |
117 | Function Module |
UPB_CMI_DFCFF_CALC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Calculates (Capital) Costs and DFCC up to year+CAP | UPB | SEM-BW | SEM-BW |
118 | Function Module |
UPB_CMI_DRIVERS_CALC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Calculates Drivers for All Years | UPB | SEM-BW | SEM-BW |
119 | Function Module |
UPB_CMI_MODIFY_SEN_VERSIONS REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Modifies Driver Mean Values for Sensitivity Analysis | UPB | SEM-BW | SEM-BW |
120 | Function Module |
UPB_CMI_TERMINAL_VALUE_CALC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Calculated (Discounted) Residual Value | UPB | SEM-BW | SEM-BW |
121 | Function Module |
UPB_CW_CREATE4BSC REFERENCE(E_PLEVEL) TYPE UPC_Y_PLEVEL
|
Ebene und Layout für BSC | UPB | SEM-BW | SEM-BW |
122 | Function Module |
UPB_CW_CREATE4BSC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Ebene und Layout für BSC | UPB | SEM-BW | SEM-BW |
123 | Function Module |
UPB_CW_CREATE_LAYOUT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Anlegen des Layouts | UPB | SEM-BW | SEM-BW |
124 | Function Module |
UPB_CW_CREATE_LAYOUT
|
Anlegen des Layouts | UPB | SEM-BW | SEM-BW |
125 | Function Module |
UPB_DATA_MAPPING_EXIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Planungsfunktion vom Typ Exit (ALV Datenanzeige) | UPB | SEM-BW | SEM-BW |
126 | Function Module |
UPB_FTAB_GET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Bilanzplanung: Feldkatalog lesen | UPB | SEM-BW | SEM-BW |
127 | Function Module |
UPB_GROWTH REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Wachstumsfunktion (Kennzahl 0AMOUNT) | UPB | SEM-BW | SEM-BW |
128 | Function Module |
UPB_GROWTH_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Wachstumsfunktion (Kennzahl 0AMOUNT) | UPB | SEM-BW | SEM-BW |
129 | Function Module |
UPB_METHOD_DELETE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
UPB: Planungsfunktion löschen | UPB | SEM-BW | SEM-BW |
130 | Function Module |
UPB_METHOD_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
UPB: Init Planungsfunktion Editieren | UPB | SEM-BW | SEM-BW |
131 | Function Module |
UPB_METHOD_PRINT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
UPB: Planungsfunktion drucken | UPB | SEM-BW | SEM-BW |
132 | Function Module |
UPB_PARAM_DELETE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
UPB: Parametrisierungen löschen | UPB | SEM-BW | SEM-BW |
133 | Function Module |
UPB_PARAM_EXECUTE_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
UPB: Initialisierung vor Ausführung einer Parametrisierung | UPB | SEM-BW | SEM-BW |
134 | Function Module |
UPB_PARAM_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
UPB: Init Parametrisierung Editieren | UPB | SEM-BW | SEM-BW |
135 | Function Module |
UPB_PARAM_PRINT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
UPB: Parametergruppe drucken | UPB | SEM-BW | SEM-BW |
136 | Function Module |
UPB_PL_ALV_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Initialization. | UPB | SEM-BW | SEM-BW |
137 | Function Module |
UPB_PM_ASSIGNS_CREATE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Create new object in Framework - common pop-up for create and copy | UPBPM | RS_BW_STRUPAK | SAP_BW |
138 | Function Module |
UPB_PM_ASSIGNS_SHOW VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Create new object in Framework - common pop-up for create and copy | UPBPM | RS_BW_STRUPAK | SAP_BW |
139 | Function Module |
UPB_PPL_FTE_TRANSFER REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraktion Kostenstellenplanung | UPB | SEM-BW | SEM-BW |
140 | Function Module |
UPB_PPL_FTE_TRANSFER_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Übernahme Vollzeitäquivalente aus HR Infocube | UPB | SEM-BW | SEM-BW |
141 | Function Module |
UPB_SY_GENERATE_CLASS REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Generate class providing connection survey to SEM-BPS | UPB | SEM-BW | SEM-BW |
142 | Function Module |
UPB_SY_GET_CHARSKEYFS REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Get chars and keyfs as class attribute of planning area and level | UPB | SEM-BW | SEM-BW |
143 | Function Module |
UPC_COPY VALUE(I_TO_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Popup for copy of planning objects | UPC | RS_BW_STRUPAK | SAP_BW |
144 | Function Module |
UPC_COPY VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Popup for copy of planning objects | UPC | RS_BW_STRUPAK | SAP_BW |
145 | Function Module |
UPC_CREATE_NEW_OBJECT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Create new object in Framework - common pop-up for create and copy | UPC | RS_BW_STRUPAK | SAP_BW |
146 | Function Module |
UPC_CREATE_NEW_OBJECT REFERENCE(E_PLEVEL) TYPE UPC_Y_PLEVEL
|
Create new object in Framework - common pop-up for create and copy | UPC | RS_BW_STRUPAK | SAP_BW |
147 | Function Module |
UPC_CREATE_NEW_OBJECT
|
Create new object in Framework - common pop-up for create and copy | UPC | RS_BW_STRUPAK | SAP_BW |
148 | Function Module |
UPC_DETAIL_CONTEXT_MENU VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Get application specific context menu | UPC | RS_BW_STRUPAK | SAP_BW |
149 | Function Module |
UPC_DETAIL_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Initialization of a detail application | UPC | RS_BW_STRUPAK | SAP_BW |
150 | Function Module |
UPC_DETAIL_READ VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Get children of one node | UPC | RS_BW_STRUPAK | SAP_BW |
151 | Function Module |
UPC_DISP_F4
|
F4 for planning objects | UPC | RS_BW_STRUPAK | SAP_BW |
152 | Function Module |
UPC_DISP_F4 VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
F4 for planning objects | UPC | RS_BW_STRUPAK | SAP_BW |
153 | Function Module |
UPC_DISP_F4 VALUE(E_PLEVEL) TYPE UPC_Y_PLEVEL
|
F4 for planning objects | UPC | RS_BW_STRUPAK | SAP_BW |
154 | Function Module |
UPC_DISP_READ
|
Read objects of one type | UPC | RS_BW_STRUPAK | SAP_BW |
155 | Function Module |
UPC_DISP_READ VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Read objects of one type | UPC | RS_BW_STRUPAK | SAP_BW |
156 | Function Module |
UPC_FIXED_METHODS_CONVERT
|
Convert DB | UPC | RS_BW_STRUPAK | SAP_BW |
157 | Function Module |
UPC_FIXED_METHODS_DELETE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Delete | UPC | RS_BW_STRUPAK | SAP_BW |
158 | Function Module |
UPC_FIXED_METHODS_GET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Get | UPC | RS_BW_STRUPAK | SAP_BW |
159 | Function Module |
UPC_FIXED_METHODS_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Initial | UPC | RS_BW_STRUPAK | SAP_BW |
160 | Function Module |
UPC_FIXED_METHODS_LITE_CREATE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Creating the planning function | UPC | RS_BW_STRUPAK | SAP_BW |
161 | Function Module |
UPC_FIXED_METHODS_READ VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Read | UPC | RS_BW_STRUPAK | SAP_BW |
162 | Function Module |
UPC_FIXED_METHODS_TRANSPORT
|
Transport | UPC | RS_BW_STRUPAK | SAP_BW |
163 | Function Module |
UPC_FIXED_METHODS_TRANSPORT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Transport | UPC | RS_BW_STRUPAK | SAP_BW |
164 | Function Module |
UPC_FUNCEXEC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Execute planning method | UPC | RS_BW_STRUPAK | SAP_BW |
165 | Function Module |
UPC_FUNCEXEC_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Initial | UPC | RS_BW_STRUPAK | SAP_BW |
166 | Function Module |
UPC_FUNCEXEC_LOG_ADD REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Add logs of a planning function | UPC | RS_BW_STRUPAK | SAP_BW |
167 | Function Module |
UPC_FW_AUTHORIZATION_CHECK VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Authorization check of objects in Framework | UPC | RS_BW_STRUPAK | SAP_BW |
168 | Function Module |
UPC_FW_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Initialization of planning screen | UPC | RS_BW_STRUPAK | SAP_BW |
169 | Function Module |
UPC_FW_METHODS_TREE_GET REFERENCE(E_PLEVEL) TYPE UPC_Y_PLEVEL
|
Get current status of the methods tree | UPC | RS_BW_STRUPAK | SAP_BW |
170 | Function Module |
UPC_FW_METHODS_TREE_UPDATE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Update methods tree in Framework | UPC | RS_BW_STRUPAK | SAP_BW |
171 | Function Module |
UPC_FW_READ_AND_SET_CHILDREN VALUE(I_ACTIVE_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Read and set children for the specific node | UPC | RS_BW_STRUPAK | SAP_BW |
172 | Function Module |
UPC_FW_READ_AND_SET_CHILDREN
|
Read and set children for the specific node | UPC | RS_BW_STRUPAK | SAP_BW |
173 | Function Module |
UPC_FW_START VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Start of the planning framework | UPC | RS_BW_STRUPAK | SAP_BW |
174 | Function Module |
UPC_FW_START_RFC VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL OPTIONAL
|
Start of the planning framework | UPC | RS_BW_STRUPAK | SAP_BW |
175 | Function Module |
UPC_FW_TREE_FIND_NODE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Finds and marks a node | UPC | RS_BW_STRUPAK | SAP_BW |
176 | Function Module |
UPC_FW_TREE_RECREATE VALUE(I_ACTIVE_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Recreate a tree | UPC | RS_BW_STRUPAK | SAP_BW |
177 | Function Module |
UPC_FW_UPDATE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Updates trees in Framework | UPC | RS_BW_STRUPAK | SAP_BW |
178 | Function Module |
UPC_FW_UPDATE
|
Updates trees in Framework | UPC | RS_BW_STRUPAK | SAP_BW |
179 | Function Module |
UPC_GENTABEXEC_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Initial | UPC | RS_BW_STRUPAK | SAP_BW |
180 | Function Module |
UPC_MAKE_BDS_KEY REFERENCE(I_LEVEL) TYPE UPC_Y_PLEVEL
|
Planning Modeler: Create BDS key for object | UPC | RS_BW_STRUPAK | SAP_BW |
181 | Function Module |
UPC_OPTION_EDITOR VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL DEFAULT SPACE
|
Planning: Edition of selection criteria for a field | UPC | RS_BW_STRUPAK | SAP_BW |
182 | Function Module |
UPC_PACKAGE_ADHOC_LITE_CREATE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Create the Ad Hoc package | UPC | RS_BW_STRUPAK | SAP_BW |
183 | Function Module |
UPC_PACKAGE_CHECK VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Check package | UPC | RS_BW_STRUPAK | SAP_BW |
184 | Function Module |
UPC_PACKAGE_CHECK_NEW VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Check package when a new one is creating | UPC | RS_BW_STRUPAK | SAP_BW |
185 | Function Module |
UPC_PACKAGE_CHECK_NEW VALUE(I_TO_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Check package when a new one is creating | UPC | RS_BW_STRUPAK | SAP_BW |
186 | Function Module |
UPC_PACKAGE_CREATE_ADHOC VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Creation of Ad-Hoc package | UPC | RS_BW_STRUPAK | SAP_BW |
187 | Function Module |
UPC_PACKAGE_DELETE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Delete | UPC | RS_BW_STRUPAK | SAP_BW |
188 | Function Module |
UPC_PACKAGE_GET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Get planning package | UPC | RS_BW_STRUPAK | SAP_BW |
189 | Function Module |
UPC_PACKAGE_GET_2 REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
read Planning package | UPC | RS_BW_STRUPAK | SAP_BW |
190 | Function Module |
UPC_PACKAGE_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Initial | UPC | RS_BW_STRUPAK | SAP_BW |
191 | Function Module |
UPC_PACKAGE_INIT
|
Initial | UPC | RS_BW_STRUPAK | SAP_BW |
192 | Function Module |
UPC_PACKAGE_READ VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Read | UPC | RS_BW_STRUPAK | SAP_BW |
193 | Function Module |
UPC_PACKAGE_TRANSPORT
|
Transport | UPC | RS_BW_STRUPAK | SAP_BW |
194 | Function Module |
UPC_PACKAGE_TRANSPORT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Transport | UPC | RS_BW_STRUPAK | SAP_BW |
195 | Function Module |
UPC_PLEVEL_CHECK VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Check plevel | UPC | RS_BW_STRUPAK | SAP_BW |
196 | Function Module |
UPC_PLEVEL_CHECK_NEW VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Check new plevel when is to create | UPC | RS_BW_STRUPAK | SAP_BW |
197 | Function Module |
UPC_PLEVEL_CHECK_NEW
|
Check new plevel when is to create | UPC | RS_BW_STRUPAK | SAP_BW |
198 | Function Module |
UPC_PLEVEL_COMMIT
|
Commit | UPC | RS_BW_STRUPAK | SAP_BW |
199 | Function Module |
UPC_PLEVEL_DELETE
|
Delete | UPC | RS_BW_STRUPAK | SAP_BW |
200 | Function Module |
UPC_PLEVEL_DELETE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Delete | UPC | RS_BW_STRUPAK | SAP_BW |
201 | Function Module |
UPC_PLEVEL_GET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Get planning level | UPC | RS_BW_STRUPAK | SAP_BW |
202 | Function Module |
UPC_PLEVEL_GET_2 REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Read Planning level | UPC | RS_BW_STRUPAK | SAP_BW |
203 | Function Module |
UPC_PLEVEL_GET_RFC VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Deprecated: use API_SEMBPS_PLEVEL_GETDETAIL | UPC | RS_BW_STRUPAK | SAP_BW |
204 | Function Module |
UPC_PLEVEL_INIT
|
Initial | UPC | RS_BW_STRUPAK | SAP_BW |
205 | Function Module |
UPC_PLEVEL_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Initial | UPC | RS_BW_STRUPAK | SAP_BW |
206 | Function Module |
UPC_PLEVEL_LITE_CREATE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Creating a level | UPC | RS_BW_STRUPAK | SAP_BW |
207 | Function Module |
UPC_PLEVEL_READ
|
Read | UPC | RS_BW_STRUPAK | SAP_BW |
208 | Function Module |
UPC_PLEVEL_TRANSPORT
|
Transport | UPC | RS_BW_STRUPAK | SAP_BW |
209 | Function Module |
UPC_PLEVEL_TRANSPORT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Transport | UPC | RS_BW_STRUPAK | SAP_BW |
210 | Function Module |
UPC_PROFILE_GET_TREE_ACT_OBJ REFERENCE(E_PLEVEL) TYPE UPC_Y_PLEVEL
|
Get active objects of a tree | UPC | RS_BW_STRUPAK | SAP_BW |
211 | Function Module |
UPC_PROFILE_OK_CODE
|
Ok_code | UPC | RS_BW_STRUPAK | SAP_BW |
212 | Function Module |
UPC_SCREENS_FOR_PACKAGE_GET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Get screen informations from using as a package | UPC | RS_BW_STRUPAK | SAP_BW |
213 | Function Module |
UPC_SCREENS_FOR_PACKAGE_GET REFERENCE(C_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Get screen informations from using as a package | UPC | RS_BW_STRUPAK | SAP_BW |
214 | Function Module |
UPC_SCREENS_FOR_PACKAGE_SET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Set screen informations for using as a package | UPC | RS_BW_STRUPAK | SAP_BW |
215 | Function Module |
UPC_STEPS_GET_USAGE
|
Calculate levels in which the characteristic values are fitting | UPC | RS_BW_STRUPAK | SAP_BW |
216 | Function Module |
UPC_STEPS_GET_USAGES_IN_PLEVEL REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
which characteristic relationships are used in PLEVEL | UPC | RS_BW_STRUPAK | SAP_BW |
217 | Function Module |
UPC_STEPS_HELP_VALUES_GET REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
F4 help planning functions | UPC | RS_BW_STRUPAK | SAP_BW |
218 | Function Module |
UPC_TRACE_ADHOCPACKAGE_SET VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
set Adhoc package | UPC | RS_BW_STRUPAK | SAP_BW |
219 | Function Module |
UPC_TRACE_FUNCTION_EXECUTE VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Execute Planning Sequence | UPC | RS_BW_STRUPAK | SAP_BW |
220 | Function Module |
UPC_TRACE_GETDATA VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Read Planning Data | UPC | RS_BW_STRUPAK | SAP_BW |
221 | Function Module |
UPC_TRACE_LAYOUT_GETDETAIL VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Trace for the API module: Detailed information on the layout | UPC | RS_BW_STRUPAK | SAP_BW |
222 | Function Module |
UPC_TRACE_PACKAGE_GETDETAIL VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Read Metadata on Planning Area | UPC | RS_BW_STRUPAK | SAP_BW |
223 | Function Module |
UPC_TRACE_PLANSTRUCTURE_GET VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL OPTIONAL
|
Read Plan Structure | UPC | RS_BW_STRUPAK | SAP_BW |
224 | Function Module |
UPC_TRACE_PLEVEL_GETDETAIL VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Read Metadata on Planning Area | UPC | RS_BW_STRUPAK | SAP_BW |
225 | Function Module |
UPC_TRACE_SEQUENCE_EXECUTE VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Execute Plan function | UPC | RS_BW_STRUPAK | SAP_BW |
226 | Function Module |
UPC_TRACE_SETDATA VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Write Plan Data into the Buffer | UPC | RS_BW_STRUPAK | SAP_BW |
227 | Function Module |
UPE_ABC_CHECK_EXISTING_PARAMS REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Prüft, ob Parameterset schon existiert | UPE | SEM-BW | SEM-BW |
228 | Function Module |
UPE_ABC_CHECK_EXISTING_PARAMS REFERENCE(I_TO_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Prüft, ob Parameterset schon existiert | UPE | SEM-BW | SEM-BW |
229 | Function Module |
UPE_ABC_DELETE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Löschen aller Simulationsparams aus dem BDS (Vormerkung) | UPE | SEM-BW | SEM-BW |
230 | Function Module |
UPE_ABC_INIT
|
Planning framework ABC-INIT | UPE | SEM-BW | SEM-BW |
231 | Function Module |
UPE_ABC_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning framework ABC-INIT | UPE | SEM-BW | SEM-BW |
232 | Function Module |
UPE_ABC_READ VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning Framework ABC-READ | UPE | SEM-BW | SEM-BW |
233 | Function Module |
UPE_ABC_RESERVE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning framework ABC-INIT | UPE | SEM-BW | SEM-BW |
234 | Function Module |
UPE_ABC_TRANSPORT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Transport Oros99-Files + Customizing Tabus | UPE | SEM-BW | SEM-BW |
235 | Function Module |
UPE_ABC_TRANSPORT
|
Transport Oros99-Files + Customizing Tabus | UPE | SEM-BW | SEM-BW |
236 | Function Module |
UPE_CREATE_NEW_OBJECT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Create new object in Framework - common pop-up for create and copy | UPC | RS_BW_STRUPAK | SAP_BW |
237 | Function Module |
UPE_DOC_DELETE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Delete all simulation params from the BDS (reservation) | UPC | RS_BW_STRUPAK | SAP_BW |
238 | Function Module |
UPE_DOC_INFOPROV_EXIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Template for planning function of type Exit | UPC | RS_BW_STRUPAK | SAP_BW |
239 | Function Module |
UPE_DOC_INFOPROV_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Template for planning function type Exit - initializing module | UPC | RS_BW_STRUPAK | SAP_BW |
240 | Function Module |
UPE_DOC_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning framework SD-INIT | UPC | RS_BW_STRUPAK | SAP_BW |
241 | Function Module |
UPE_DOC_RESERVE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning framework SD-INIT | UPC | RS_BW_STRUPAK | SAP_BW |
242 | Function Module |
UPE_SD_CHECK_EXISTING_PARAMS REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Prüft, ob Parameterset schon existiert | UPE | SEM-BW | SEM-BW |
243 | Function Module |
UPE_SD_CHECK_EXISTING_PARAMS REFERENCE(I_TO_PLEVEL) TYPE UPC_Y_PLEVEL
|
Prüft, ob Parameterset schon existiert | UPE | SEM-BW | SEM-BW |
244 | Function Module |
UPE_SD_DELETE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Löschen aller Simulationsparams aus dem BDS (Vormerkung) | UPE | SEM-BW | SEM-BW |
245 | Function Module |
UPE_SD_INIT
|
Planning framework SD-INIT | UPE | SEM-BW | SEM-BW |
246 | Function Module |
UPE_SD_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning framework SD-INIT | UPE | SEM-BW | SEM-BW |
247 | Function Module |
UPE_SD_READ VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning Framework SD-READ | UPE | SEM-BW | SEM-BW |
248 | Function Module |
UPE_SD_RESERVE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning framework SD-INIT | UPE | SEM-BW | SEM-BW |
249 | Function Module |
UPE_SD_TRANSPORT
|
transportiert alle SD-Modelle+Customizing-TABU's | UPE | SEM-BW | SEM-BW |
250 | Function Module |
UPE_SD_TRANSPORT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
transportiert alle SD-Modelle+Customizing-TABU's | UPE | SEM-BW | SEM-BW |
251 | Function Module |
UPE_SHOW_ASSIGNS VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Create new object in Framework - common pop-up for create and copy | UPC | RS_BW_STRUPAK | SAP_BW |
252 | Function Module |
UPF_BSTEPS_GET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Steps of a bundle | UPF | RS_BW_STRUPAK | SAP_BW |
253 | Function Module |
UPF_BUNDLE_DELETE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Delete bundle | UPF | RS_BW_STRUPAK | SAP_BW |
254 | Function Module |
UPF_BUNDLE_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Initialization of the Edition | UPF | RS_BW_STRUPAK | SAP_BW |
255 | Function Module |
UPF_BUNDLE_READ VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Read bundle | UPF | RS_BW_STRUPAK | SAP_BW |
256 | Function Module |
UPF_BUNDLE_TRANSPORT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Pooling of planning functions transport connection | UPF | RS_BW_STRUPAK | SAP_BW |
257 | Function Module |
UPF_BUNDLE_TRANSPORT
|
Pooling of planning functions transport connection | UPF | RS_BW_STRUPAK | SAP_BW |
258 | Function Module |
UPF_CALC_CRITERIA_GET REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Read calculation characteristics of a method | UPF | RS_BW_STRUPAK | SAP_BW |
259 | Function Module |
UPF_DOC_COPY_EXIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Template for planning function of type Exit | UPF | RS_BW_STRUPAK | SAP_BW |
260 | Function Module |
UPF_DOC_COPY_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Template for planning function type Exit - initializing module | UPF | RS_BW_STRUPAK | SAP_BW |
261 | Function Module |
UPF_DOC_DEL_EXIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Template for planning function of type Exit | UPF | RS_BW_STRUPAK | SAP_BW |
262 | Function Module |
UPF_DOC_DEL_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Template for planning function type Exit - initializing module | UPF | RS_BW_STRUPAK | SAP_BW |
263 | Function Module |
UPF_EXCEL_AFTER_DATA_PUT_01 REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
excel exit: example, to write data into the current Excel sheet | UPF | RS_BW_STRUPAK | SAP_BW |
264 | Function Module |
UPF_EXCEL_COUNT_LINES_01 REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
excel exit: Bestimmt die aktuelle Anzahl der Datenzeilen | UPF | RS_BW_STRUPAK | SAP_BW |
265 | Function Module |
UPF_EXCEL_REFERENCE_COL REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
exit excel: Reads Reference data and displays it in a data column | UPF | RS_BW_STRUPAK | SAP_BW |
266 | Function Module |
UPF_EXIT_CREATE_ENTRY_01 REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
UPF_EXIT_CREATE_ENTRY_01 | UPF | RS_BW_STRUPAK | SAP_BW |
267 | Function Module |
UPF_EXIT_HELP_VALUES_GET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
F4 help planning functions | UPF | RS_BW_STRUPAK | SAP_BW |
268 | Function Module |
UPF_EXIT_INIT_EXAMPLE_01 REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Exit function is called with a specific record determined in the Exit Init | UPF | RS_BW_STRUPAK | SAP_BW |
269 | Function Module |
UPF_FORECAST_EXIT_EXECUTE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Forecast run | UPF | RS_BW_STRUPAK | SAP_BW |
270 | Function Module |
UPF_FORECAST_EXIT_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Forecast Initialization | UPF | RS_BW_STRUPAK | SAP_BW |
271 | Function Module |
UPF_FORECAST_LOG_DISPLAY REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
log display dummy | UPF | RS_BW_STRUPAK | SAP_BW |
272 | Function Module |
UPF_FORECAST_LOG_DISPLAY_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Log Display | UPF | RS_BW_STRUPAK | SAP_BW |
273 | Function Module |
UPF_FORML_COPY
|
Copy formulas | UPF | RS_BW_STRUPAK | SAP_BW |
274 | Function Module |
UPF_FORMULA_CHECK REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Verify / Compile Formulas | UPF | RS_BW_STRUPAK | SAP_BW |
275 | Function Module |
UPF_FORMULA_EDIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning functions: edit formulas | UPF | RS_BW_STRUPAK | SAP_BW |
276 | Function Module |
UPF_HELP_VALUES_GET REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
F4 help planning functions | UPF | RS_BW_STRUPAK | SAP_BW |
277 | Function Module |
UPF_HELP_VALUES_GET
|
F4 help planning functions | UPF | RS_BW_STRUPAK | SAP_BW |
278 | Function Module |
UPF_LISTCUBE_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Start planning function Edition | UPF | RS_BW_STRUPAK | SAP_BW |
279 | Function Module |
UPF_METHOD_CHECK_EXISTENCE VALUE(I_TO_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning: Layout Builder: Check whether Layout exists | UPF | RS_BW_STRUPAK | SAP_BW |
280 | Function Module |
UPF_METHOD_DELETE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
delete Planning function with dep. objects | UPF | RS_BW_STRUPAK | SAP_BW |
281 | Function Module |
UPF_METHOD_ENQUEUE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Lock Planning function | UPF | RS_BW_STRUPAK | SAP_BW |
282 | Function Module |
UPF_METHOD_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Start planning function Edition | UPF | RS_BW_STRUPAK | SAP_BW |
283 | Function Module |
UPF_METHOD_READ VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planungsfunktionen: Planungsfunktionen einlesen | UPF | RS_BW_STRUPAK | SAP_BW |
284 | Function Module |
UPF_METHOD_TEXT_GET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Provides texts for planning functions | UPF | RS_BW_STRUPAK | SAP_BW |
285 | Function Module |
UPF_METHOD_TRANSPORT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Transport planning function | UPF | RS_BW_STRUPAK | SAP_BW |
286 | Function Module |
UPF_MODIFY_KEY_FIGURE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Changing a key figure value | UPF | RS_BW_STRUPAK | SAP_BW |
287 | Function Module |
UPF_OPTIOS_TEXT_SET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Read texts to selection criteria | UPF | RS_BW_STRUPAK | SAP_BW |
288 | Function Module |
UPF_PACKAGE_GET_PER_USER REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Read the package selection, user can also be passed | UPF | RS_BW_STRUPAK | SAP_BW |
289 | Function Module |
UPF_PACKAGE_INTERSECTION_CHECK VALUE(I_PLEVEL_B) TYPE UPC_Y_PLEVEL OPTIONAL
|
Checks for intersection of package selections | UPF | RS_BW_STRUPAK | SAP_BW |
290 | Function Module |
UPF_PACKAGE_INTERSECTION_CHECK REFERENCE(I_PLEVEL_A) TYPE UPC_Y_PLEVEL
|
Checks for intersection of package selections | UPF | RS_BW_STRUPAK | SAP_BW |
291 | Function Module |
UPF_PARAM_CHECK_EXISTENCE VALUE(I_TO_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning: Layout Builder: Check whether Layout exists | UPF | RS_BW_STRUPAK | SAP_BW |
292 | Function Module |
UPF_PARAM_ENQUEUE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Lock parameter group | UPF | RS_BW_STRUPAK | SAP_BW |
293 | Function Module |
UPF_PARAM_EXECUTE_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Initialization of parameters prior to execution of a group | UPF | RS_BW_STRUPAK | SAP_BW |
294 | Function Module |
UPF_PARAM_INFO_GET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
read buffered information about the planning functions | UPF | RS_BW_STRUPAK | SAP_BW |
295 | Function Module |
UPF_PARAM_INFO_SET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
read buffered information about the planning functions | UPF | RS_BW_STRUPAK | SAP_BW |
296 | Function Module |
UPF_PARAM_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Start Edit Parametergroup | UPF | RS_BW_STRUPAK | SAP_BW |
297 | Function Module |
UPF_PARAM_READ VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning functions: Read parameters | UPF | RS_BW_STRUPAK | SAP_BW |
298 | Function Module |
UPF_PARAM_TEXT_GET VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Texts to groups of parameters | UPF | RS_BW_STRUPAK | SAP_BW |
299 | Function Module |
UPF_PARAM_TRANSPORT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Transport parameter group | UPF | RS_BW_STRUPAK | SAP_BW |
300 | Function Module |
UPF_PLAN_FUNC_GENERATE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
generate planning function | UPF | RS_BW_STRUPAK | SAP_BW |
301 | Function Module |
UPF_PRICE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Example for price calculation | UPF | RS_BW_STRUPAK | SAP_BW |
302 | Function Module |
UPF_QUOTA_PLANNING REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Example rate planning like in CO-PA | UPF | RS_BW_STRUPAK | SAP_BW |
303 | Function Module |
UPF_TRACE_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Initialize Execution-Trace of planning functions | UPC | RS_BW_STRUPAK | SAP_BW |
304 | Function Module |
UPF_VARIABLES_REPLACE
|
Replace Variables | UPF | RS_BW_STRUPAK | SAP_BW |
305 | Function Module |
UPF_VARIABLES_REPLACE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Replace Variables | UPF | RS_BW_STRUPAK | SAP_BW |
306 | Function Module |
UPK_METHOD_DELETE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Parametergruppe mit abh. Objekten löschen | UPM_DEMO | SEM-BW | SEM-BW |
307 | Function Module |
UPK_METHOD_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planungsfunktion Edition starten | UPM_DEMO | SEM-BW | SEM-BW |
308 | Function Module |
UPK_METHOD_TRANSPORT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Transport von Einstellungen zu Gebiet und Ebene | UPM_DEMO | SEM-BW | SEM-BW |
309 | Function Module |
UPK_PARAM_EXECUTE_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Initialisierung vor Ausführung einer Parametergruppe | UPM_DEMO | SEM-BW | SEM-BW |
310 | Function Module |
UPK_PARAM_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Parametergruppe Edition starten | UPM_DEMO | SEM-BW | SEM-BW |
311 | Function Module |
UPP_LB_CHECK_EXISTENCE VALUE(I_TO_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning: Layout Builder: Check whether layout exists | UPP | RS_BW_STRUPAK | SAP_BW |
312 | Function Module |
UPP_LB_DELETE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning: Layout Builder: Deleting Layouts | UPP | RS_BW_STRUPAK | SAP_BW |
313 | Function Module |
UPP_LB_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning: Layout Builder initialization | UPP | RS_BW_STRUPAK | SAP_BW |
314 | Function Module |
UPP_LB_LAYOUT_GET_DETAIL REFERENCE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Planning: Layout Definition | UPP | RS_BW_STRUPAK | SAP_BW |
315 | Function Module |
UPP_LB_LITE_CREATE VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Creating the layout | UPP | RS_BW_STRUPAK | SAP_BW |
316 | Function Module |
UPP_LB_READ VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning: Layout Builder return the existing layout | UPP | RS_BW_STRUPAK | SAP_BW |
317 | Function Module |
UPP_LB_TRANSPORT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning: Transport Layout Builder | UPP | RS_BW_STRUPAK | SAP_BW |
318 | Function Module |
UPP_PLAN_COMMON_WORK VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Read: Level, package and check permissions | UPP | RS_BW_STRUPAK | SAP_BW |
319 | Function Module |
UPP_PLAN_GET_LAYOUT_FLAGS VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Some settings in the planning layout | UPP | RS_BW_STRUPAK | SAP_BW |
320 | Function Module |
UPP_PLAN_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planning: Initialization of the detail application | UPP | RS_BW_STRUPAK | SAP_BW |
321 | Function Module |
UPP_SERV_CONSTRUCTOR REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Manual Planning and Services: Preparation / constructor | UPP | RS_BW_STRUPAK | SAP_BW |
322 | Function Module |
UPR_COST_PLAN_EXEC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraktion Kostenstellenplanung | UPBR | RS_BCT_STRUPAK | BI_CONT |
323 | Function Module |
UPR_COST_PLAN_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraktion Kostenstellenplanung init | UPBR | RS_BCT_STRUPAK | BI_CONT |
324 | Function Module |
UPR_FAGL_PLAN_EXEC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraction NewGL Execute | UPBR | RS_BCT_STRUPAK | BI_CONT |
325 | Function Module |
UPR_FAGL_PLAN_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraction NewGL Init | UPBR | RS_BCT_STRUPAK | BI_CONT |
326 | Function Module |
UPR_FISL_PLAN_EXEC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraktion FI-SL | UPBR | RS_BCT_STRUPAK | BI_CONT |
327 | Function Module |
UPR_FISL_PLAN_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraktion FI-SL init | UPBR | RS_BCT_STRUPAK | BI_CONT |
328 | Function Module |
UPR_PARAM_EXECUTE_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Initialization of parameters prior to execution of a group | UPF | RS_BW_STRUPAK | SAP_BW |
329 | Function Module |
UPR_PARAM_EXECUTE_INIT
|
Initialization of parameters prior to execution of a group | UPF | RS_BW_STRUPAK | SAP_BW |
330 | Function Module |
UPR_PCA_PLAN_EXEC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraktion PCA | UPBR | RS_BCT_STRUPAK | BI_CONT |
331 | Function Module |
UPR_PCA_PLAN_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Retraktion PCA init | UPBR | RS_BCT_STRUPAK | BI_CONT |
332 | Function Module |
UPS_METHOD_DELETE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planungsfunktion mit abh. Objekten löschen | UPB | SEM-BW | SEM-BW |
333 | Function Module |
UPS_METHOD_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planungsfunktion Edition starten | UPB | SEM-BW | SEM-BW |
334 | Function Module |
UPS_PARAM_EXECUTE_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Initialisierung vor Ausführung einer Parametergruppe | UPB | SEM-BW | SEM-BW |
335 | Function Module |
UPS_PARAM_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Bilanzplanung: Init Parametergruppe Editieren | UPB | SEM-BW | SEM-BW |
336 | Function Module |
UPT_METHOD_DELETE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Bilanzplanung: Planungsfunktion löschen | UPB | SEM-BW | SEM-BW |
337 | Function Module |
UPT_METHOD_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Bilanzplanung: Funktion definieren | UPB | SEM-BW | SEM-BW |
338 | Function Module |
UPT_METHOD_PRINT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planung TL: Drucken Funktion | UPB | SEM-BW | SEM-BW |
339 | Function Module |
UPT_PARAM_ALV_LIST REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Bilanzplanung: Aufbereitung der Parametergr im ALV | UPB | SEM-BW | SEM-BW |
340 | Function Module |
UPT_PARAM_ALV_LIST
|
Bilanzplanung: Aufbereitung der Parametergr im ALV | UPB | SEM-BW | SEM-BW |
341 | Function Module |
UPT_PARAM_DELETE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Bilanzplanung: Parametrisierungen löschen | UPB | SEM-BW | SEM-BW |
342 | Function Module |
UPT_PARAM_EXECUTE_2
|
Bilanzplanung: Planung ausführen | UPB | SEM-BW | SEM-BW |
343 | Function Module |
UPT_PARAM_EXECUTE_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Bilanzplanung: Planung Ausführen initialisieren | UPB | SEM-BW | SEM-BW |
344 | Function Module |
UPT_PARAM_INIT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Bilanzplanung: Init Parametergruppe editieren | UPB | SEM-BW | SEM-BW |
345 | Function Module |
UPT_PARAM_PRINT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Planung TL: Drucken Parametergruppe | UPB | SEM-BW | SEM-BW |
346 | Function Module |
UPUC_QP_COST_DETERMINE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Plankostenermittlung (Exit) | UPUC | RS_BCT_STRUPAK | BI_CONT |
347 | Function Module |
UPUC_QP_COST_DISTRIBUTE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Plankostenermittlung (Exit) | UPUC | RS_BCT_STRUPAK | BI_CONT |
348 | Function Module |
UPUC_QP_COST_INIT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Exit-Funktion wird mit einem im Exit-Init bestimmten Datensatz aufgerufen | UPUC | RS_BCT_STRUPAK | BI_CONT |
349 | Function Module |
UPWB_CREATE_WIF_FOR_A_LAYOUT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Create WEB Interface for a layout automatically | UPWB | RS_BW_STRUPAK | SAP_BW |
350 | Function Module |
UPWB_GET_CHA_VALUES
|
Value help | UPWB | RS_BW_STRUPAK | SAP_BW |
351 | Function Module |
UPWB_GET_PARAM_GROUPS VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Read Plan Structure | UPWB | RS_BW_STRUPAK | SAP_BW |
352 | Function Module |
UPW_READ_DATA_FOR_GRAPH VALUE(I_PLEVEL) TYPE UPC_PLEVEL-PLEVEL
|
Read data (read-only) for graphics | UPW | RS_BW_STRUPAK | SAP_BW |
353 | Function Module |
UPW_SET_DATA_SHORT VALUE(I_PLEVEL) TYPE UPC_PLEVEL-PLEVEL
|
stateful, commit to shortened etk_data structures | UPW | RS_BW_STRUPAK | SAP_BW |
354 | Function Module |
UPX_API_SEMBPS_GETDATA VALUE(I_PLEVEL) LIKE UPC_PLEVEL-PLEVEL
|
Read Planning Data | UPX | RS_BW_STRUPAK | SAP_BW |
355 | Function Module |
UPX_CHANM_GET_TEXT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
get advanced characteristic text | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
356 | Function Module |
UPX_EXIT_COMPLETE_TIME REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
BPS Exit for Standard Period Distribution | UPX | RS_BW_STRUPAK | SAP_BW |
357 | Function Module |
UPX_EXIT_DERIVE_LOWEST_NODE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
BPS Exit to Fill a Generic Characteristic from Characteristic Sequence | UPX | RS_BW_STRUPAK | SAP_BW |
358 | Function Module |
UPX_EXIT_HIERARCHY_COMPLETE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
BPS Exit for Derivation of Characteristics from Hierarchy | UPX | RS_BW_STRUPAK | SAP_BW |
359 | Function Module |
UPX_EXIT_REPORT_EXECUTE REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
BPS Exit to Execute a BW Report | UPX | RS_BW_STRUPAK | SAP_BW |
360 | Function Module |
UPX_EXIT_UNIT_CONVERSION REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
BPS Exit for Quantity Conversion on the Basis of CRM Conversion Factor | UPX | RS_BW_STRUPAK | SAP_BW |
361 | Function Module |
UPX_KFP_MKT_GET_BPHN VALUE(I_PROFILE) TYPE UPC_Y_PLEVEL
|
Derive BPHN of BP | UPX_KFP | RS_BCT_STRUPAK | BI_CONT |
362 | Function Module |
UPX_KPI_API_CHECK_LAYOUT_CONFI REFERENCE(I_LEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Checks layout compatability with the new render | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
363 | Function Module |
UPX_KPI_API_CREATE_DDIC_STRUCT REFERENCE(I_LEVEL) TYPE UPC_Y_PLEVEL
|
Create ddic stucture for the planning layout | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
364 | Function Module |
UPX_KPI_API_GET_RENDER REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL OPTIONAL
|
Get planning render object | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
365 | Function Module |
UPX_KPI_API_IS_FLEX_COMPATIBLE
|
FM to check if planning profile is Flex compatible | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
366 | Function Module |
UPX_KPI_API_KYF_DEC REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Extract decimal number based on combination | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
367 | Function Module |
UPX_KPI_API_KYF_DEC_EXTRACT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Extract least no of decimals used for a keyfigure to buffer | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
368 | Function Module |
UPX_KPI_KF_PLEVEL_READ
|
Read Key Figure from Other Planning Level | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
369 | Function Module |
UPX_KPI_KF_PLEVEL_READ2
|
Read Key Figure from Other Planning Level | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
370 | Function Module |
UPX_KPI_MKT_FACTOR REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Vorlage für Planungsfunktion vom Typ Exit | UPX_KFP | RS_BCT_STRUPAK | BI_CONT |
371 | Function Module |
UPX_KPI_MKT_PLEVEL_GETDETAIL VALUE(IM_PLEVEL) TYPE UPC_PLEVEL-PLEVEL
|
Read the full information for planning level | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
372 | Function Module |
UPX_KPI_MKT_PREDICT REFERENCE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Vorlage für Planungsfunktion vom Typ Exit | UPX_KFP | RS_BCT_STRUPAK | BI_CONT |
373 | Function Module |
UPX_KYFNM_GET_TEXT VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
get advanced characteristic text | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
374 | Function Module |
UPX_LAYOUT_API_DETAILS VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
DHTML layouts generation | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
375 | Function Module |
UPX_LAYOUT_API_RENDER VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
DHTML layouts generation | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
376 | Function Module |
UPX_LAYOUT_API_SETTINGS VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Read the setting for the particular layout | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
377 | Function Module |
UPX_LAYOUT_GET_VERSION VALUE(I_PLEVEL) TYPE UPC_Y_PLEVEL
|
Create new layout version if necessary | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
378 | Function Module |
UPX_PAGINATION_API REFERENCE(IV_LEVEL) TYPE UPC_Y_PLEVEL
|
UPX Pagination API | UPX_KPI | RS_BW_STRUPAK | SAP_BW |
379 | Function Module |
UPX_VAR_CHAR_API REFERENCE(IV_LEVEL) TYPE UPC_Y_PLEVEL
|
BPS Variable Character Association API | UPX_KPI | RS_BW_STRUPAK | SAP_BW |