Data Element list used by SAP ABAP Table QASPR (Result and specification record for the sample)
SAP ABAP Table 
QASPR (Result and specification record for the sample) is using
| # | Object Type | Object Name | Object Description | Note |
|---|---|---|---|---|
 |
|
|||
| 1 |  Data Element |
QAENDERER | Name of User who Most Recently Changed the Data Record | |
| 2 | Data Element |
QAENDERER | Name of User who Most Recently Changed the Data Record | |
| 3 | Data Element |
QANNAHMEZ | Acceptance Number | |
| 4 | Data Element |
QANTEIL | Estimated Fraction of Nonconforming Sample Units | |
| 5 | Data Element |
QANTEILO | Estimated Fraction Above the Tolerance Range | |
| 6 | Data Element |
QANTEILU | Estimated Fraction Below the Tolerance Range | |
| 7 | Data Element |
QANZFEHEH2 | Number of Nonconforming Sample Units | |
| 8 | Data Element |
QANZFEHL2 | Number of Defects Found | |
| 9 | Data Element |
QANZWERTG2 | Number of Inspected Sample Units | |
| 10 | Data Element |
QANZWERTO2 | Number of Measured Values Above the Tolerance Range | |
| 11 | Data Element |
QANZWERTU2 | Number of Measured Values Below the Tolerance Range | |
| 12 | Data Element |
QATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
| 13 | Data Element |
QBEASTATOD | Quality Status of Results Record Before Last Change | |
| 14 | Data Element |
QBEASTATUS | Results Record Status | |
| 15 | Data Element |
QBEWERT | Valuation Rule | |
| 16 | Data Element |
QCODE | Code | |
| 17 | Data Element |
QCODE | Code | |
| 18 | Data Element |
QCODE | Code | |
| 19 | Data Element |
QCODE | Code | |
| 20 | Data Element |
QCODE | Code | |
| 21 | Data Element |
QCODEGRP | Code Group | |
| 22 | Data Element |
QCODEGRP | Code Group | |
| 23 | Data Element |
QCODEGRP | Code Group | |
| 24 | Data Element |
QCODEGRP | Code Group | |
| 25 | Data Element |
QCODEGRP | Code Group | |
| 26 | Data Element |
QCODESELE | Selected Defect Code for Autom. Generation of Defect Records | |
| 27 | Data Element |
QDATUMAEND | Date on Which Data Record Was Changed | |
| 28 | Data Element |
QDATUMAEND | Date on Which Data Record Was Changed | |
| 29 | Data Element |
QDATUMERST | Date on Which the Data Record Was Created | |
| 30 | Data Element |
QDATUMERST | Date on Which the Data Record Was Created | |
| 31 | Data Element |
QDBEWERTG | Valuation of the Characteristic for Dynamic Modification | |
| 32 | Data Element |
QDIFF_DEC_PLACES | Different Number of Decimal Places | |
| 33 | Data Element |
QEANTVERF | Fraction Calculation | |
| 34 | Data Element |
QERGDATH | Origin of Results Data | |
| 35 | Data Element |
QERGDATHPL | Planned Results Data Origin | |
| 36 | Data Element |
QERSTELLER | Name of User Who Created the Data Record | |
| 37 | Data Element |
QERSTELLER | Name of User Who Created the Data Record | |
| 38 | Data Element |
QFBNAME | Name of Function Module | |
| 39 | Data Element |
QFEHLKLAS | Defect class | |
| 40 | Data Element |
QGRPSELE | Code Group of the Default Record for Automatic Generation | |
| 41 | Data Element |
QINPPROC_READY | Input Processing Successfully Completed | |
| 42 | Data Element |
QISTSTPUMF | Number of Recorded Sample Units | |
| 43 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 44 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 45 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 46 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 47 | Data Element |
QKATAUSW | Catalog Type of Assigned Code Group or Selected Set | |
| 48 | Data Element |
QKATERG | Catalog Confirmations Available | |
| 49 | Data Element |
QKFAKTOR | K-Factor for a Variable Inspection | |
| 50 | Data Element |
QKURZTEXT | Short Text | |
| 51 | Data Element |
QKZAENBEL | Create Change Documents During Results Recording | |
| 52 | Data Element |
QKZATTRFE | Attributive Inspection by Nonconforming Units | |
| 53 | Data Element |
QKZATTRFZ | Attributive Inspection by Number of Defects | |
| 54 | Data Element |
QKZBEWERTG | Valuation Copied or Forced | |
| 55 | Data Element |
QKZCOD | Valuation by Code | |
| 56 | Data Element |
QKZKNULL | Inspection Against Specification Limits (k = 0) | |
| 57 | Data Element |
QKZMAN | Manual Valuation | |
| 58 | Data Element |
QKZQRK | Acceptance Using Control Chart | |
| 59 | Data Element |
QKZVARS | Variable Inspection by S-Method | |
| 60 | Data Element |
QLFNKN | Current Node Number from Order Counter APLZL | |
| 61 | Data Element |
QLTEXTKZ | Inspection Characteristic Long Text Exists | |
| 62 | Data Element |
QMARK | Selection Field | |
| 63 | Data Element |
QMASCHINE | General Information | |
| 64 | Data Element |
QMAXWERT | Maximum Value of the Valid Measured Values | |
| 65 | Data Element |
QMBEWERTG | Inspection Result Valuation | |
| 66 | Data Element |
QMEDIANWRT | Median of Valid Measured Values | |
| 67 | Data Element |
QMERKNRP | Inspection Characteristic Number | |
| 68 | Data Element |
QMINWERT | Minimum Value of the Valid Measured Values | |
| 69 | Data Element |
QMITTELWRT | Arithmetic Mean of Valid Measured Values | |
| 70 | Data Element |
QMOMENT3 | Third Central Moment of Valid Measured Values | |
| 71 | Data Element |
QMOMENT4 | Fourth Central Moment of Valid Measured Values | |
| 72 | Data Element |
QNIANTEIL | Not Initialized for Fraction | |
| 73 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 74 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 75 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 76 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 77 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 78 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 79 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 80 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 81 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 82 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 83 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 84 | Data Element |
QNINITIAL | Value Not Initial if Set | |
| 85 | Data Element |
QORIGINAL_INPUT | Original Value Before Input Processing | |
| 86 | Data Element |
QPLOS | Inspection Lot Number | |
| 87 | Data Element |
QPRFBESPRA | Long Text Language for Inspection Description | |
| 88 | Data Element |
QPROBEMGEH | Base Unit of Measure for the Sample Unit | |
| 89 | Data Element |
QPROBENR | Sample Number | |
| 90 | Data Element |
QPROBME | Sample Unit of Measure | |
| 91 | Data Element |
QPROBMGFAK | Sample Unit Factor | |
| 92 | Data Element |
QPRPOS | Test Position | |
| 93 | Data Element |
QPRSCHAERF | Inspection Severity | |
| 94 | Data Element |
QPRSTUFE | Inspection Stage | |
| 95 | Data Element |
QPRUEFDATB | End Date of the Inspection | |
| 96 | Data Element |
QPRUEFDATV | Inspection Start Date | |
| 97 | Data Element |
QPRUEFER | Name of the Inspector | |
| 98 | Data Element |
QPRUEFUMF | Quantity to Be Inspected | |
| 99 | Data Element |
QPRUEFZTB | End Time of the Inspection | |
| 100 | Data Element |
QPRUEFZTV | Starting Time of the Inspection | |
| 101 | Data Element |
QQRKNR | Control Chart Number | |
| 102 | Data Element |
QRUECKWEZ | Rejection Number | |
| 103 | Data Element |
QSENDEFLAG | Characteristic Result Confirmation from Control Station | |
| 104 | Data Element |
QSPANNWEI | Range of Valid Measured Values | |
| 105 | Data Element |
QSTATUS | Specification Record Status | |
| 106 | Data Element |
QSTDAW | Standard Deviation of Valid Measured Values | |
| 107 | Data Element |
QSTIPROUMF | Sample Size that Must Be Inspected | |
| 108 | Data Element |
QUMREN | Factor for Converting MatUnitOfMeasure to SampUnitOfMeasure | |
| 109 | Data Element |
QUMRENPME | Factor for Converting SampUnitOfMeasure to MatUnitOfMeasure | |
| 110 | Data Element |
QUPSL | Data Base Access | |
| 111 | Data Element |
QUPSL | Data Base Access | |
| 112 | Data Element |
QVARIANZ | Dispersion (Variance) of Valid Measured Values | |
| 113 | Data Element |
QVERSNR | Version Number | |
| 114 | Data Element |
QVERSNR | Version Number | |
| 115 | Data Element |
QVERSNR | Version Number | |
| 116 | Data Element |
QVERSNR | Version Number | |
| 117 | Data Element |
QVERSNR | Version Number | |
| 118 | Data Element |
QZEITAEND | Time at which data record was last changed | |
| 119 | Data Element |
QZEITERSTL | Time at which data record was created | |
| 120 | Data Element |
SIGN_GUID_22 | Digital Signature: Signature Number as GUID with 22 Chars. | |
| 121 | Data Element |
SIGN_STATE | Status of Signature Process | |
| 122 | Data Element |
SPRAS | Language Key |
