SAP ABAP Message Class QP (Message IDs for function module group QPAA)

Basic Data

Hierarchy

☛ BBPCRM (Software Component) BBPCRM
   ⤷ CRM (Application Component) Customer Relationship Management
     ⤷ CRM_APPLICATION (Package) All CRM Components Without Special Structure Packages
       ⤷ QP (Package) QM inspection plan characteristics

Attributes

Message class	QP
Short Description	Message IDs for function module group QPAA
Changed On	19970521
Last Changed At	105700

Messages

#	Message	Message Short Text	Documentation status	Authorization check
1	049	Sytem error during processing of long text &1		☐
2	050	Long text for inspection plan & could not be copied		☐
3	051	Inspection plan & is already being processed by &	Space: object requires documentation	☐
4	052	There is no task list matching the selection criteria	Space: object requires documentation	☐
5	053	The first selected inspection plan has already been reached		☐
6	054	The inspection plan identifier exists already. Enter another.	Space: object requires documentation	☐
7	055	Inspection plans exist in the past or in the future		☐
8	056	Inspection plan & has been deleted	Space: object requires documentation	☐
9	057	Inspection plan is not released for inspection		☐
10	058	Inspection plan is not released for costing		☐
11	059	You are not authorized to delete this inspection plan		☐
12	061	Inspection plan $ / $ / $ was deleted		☐
13	062	Inspection plan with plan group & is saved		☐
14	063	Inspection plan with plan group & for material & is saved		☐
15	064	Select an inspection plan	Space: object requires documentation	☐
16	065	List does not contain inspection plans		☐
17	066	The last selected inspection plan has already been reached		☐
18	067	Key date is overwritten with date & from change number	Space: object requires documentation	☐
19	068	Inspection plan $ $ is not valid for date $		☐
20	069	Inspection plan $ $ is not generally valid from & through &		☐
21	070	Inspection plan & & in lot size interval is not generally valid		☐
22	071	No group counter was selected	Space: object requires documentation	☐
23	072	No use exists for the selection criteria you entered	Space: object requires documentation	☐
24	073	& inspection plans (headers) were read	Space: object requires documentation	☐
25	079	* Starting 080: checks for an oper: starting 090: like 080 w/addl ident.		☐
26	080	Referenced characteristic & is not defined in operation		☐
27	081	Referenced characteristic & is not variable (quantitative)		☐
28	082	No measured values are recorded for referenced characteristic &		☐
29	083	Referenced characteristic & is a calculated characteristic		☐
30	084	No test equipment assigned		☐
31	085	No confirmation required for referenced characteristic &		☐
32	086	No original value recording for referenced characteristic &		☐
33	087	Cond.charac.: There is no preceding required characteristic in operation		☐
34	088	No original value recording for calculated characteristic &		☐
35	089	No partial samples exist for referenced characteristic &		☐
36	090	Formula &: referenced characteristic & is not defined in operation		☐
37	091	Formula &: referenced characteristic & is not variable (quantitative)		☐
38	092	Formula &: no measured values are recorded for ref.charac. &		☐
39	093	Formula &: referenced characteristic & is a calculated characteristic		☐
40	095	Formula &: no confirmation required for referenced characteristic &		☐
41	096	Formula &: no original value recording for referenced characteristic &		☐
42	097	Cond.char. &: There is no preceding required charac. in the operation		☐
43	098	Formula &: no original value recording for calculated characteristic		☐
44	099	Formula &: no partial samples exist for referenced characteristic &		☐
45	100	Error during key date selection		☐
46	101	Nominal values cannot be specified for tolerance key		☐
47	102	There is no unit of measure assigned	Space: object requires documentation	☐
48	110	Error during conversion: & & &		☐
49	111	Processing with inspection points is required for insp. lots in PM orders	Space: object requires documentation	☐
50	120	Enter * in the field	Space: object requires documentation	☐
51	123	Maintain QM plant settings for plant &	Space: object requires documentation	☐
52	124	* 125-139 and 140-154 operation check (refer to 80 and 90)		☐
53	125	Calculated characteristic & does not have partial samples		☐
54	126	Referenced characteristic & has a different sampling procedure		☐
55	127	Maintain the defect codes		☐
56	128	No results recorded for ref. characteristic &		☐
57	129	The calculated characteristic must be a long-term characteristic		☐
58	140	Formula &: The calculated characteristic has no partial samples		☐
59	141	Formula &: Sampling procedure differs from characteristic &		☐
60	142	Char. &: No defect code has been maintained	Space: object requires documentation	☐
61	143	Formula & : No results are recorded for referenced characteristic &		☐
62	144	Formula & : Calculated characteristic must be a long-term characteristic		☐
63	145	CH&: External data origin not allowed for calc. char. and classed char.	Space: object requires documentation	☐
64	146	Op. &1, CH &2: Char. ident. &3 used for QDI several times in task list	Space: object requires documentation	☐
65	147	Operation &1, CH &2: External data origin not allowed for insp. points	Space: object requires documentation	☐
66	148	Customizing table TQ73 is not maintained for results data origin &	Space: object requires documentation	☐
67	150	Enter field name		☐
68	151	Caution: function module name is reset		☐
69	152	Enter function module		☐
70	153	Caution: field name is reset		☐
71	154	Maintain two characters for parameter name		☐
72	155	Function module name is reset	Space: object requires documentation	☐
73	156	Enter a function module	Space: object requires documentation	☐
74	157	Field name is reset	Space: object requires documentation	☐
75	158	Maintain two characters for parameter name	Space: object requires documentation	☐
76	159	Status does not allow business operation &	Space: object requires documentation	☐
77	199	Material has already been assigned to the inspection plan		☐
78	200	Enter numbers for unplanned characteristics (QM client presettings)	Space: object requires documentation	☐
79	201	There are no dynamic modification criteria for plan use &		☐
80	202	Maintain Table TQ03 for module pool & and screen &	Space: object requires documentation	☐
81	203	Number ranges for characteristics cannot be changed		☐
82	204	Maintain change number &	Space: object requires documentation	☐
83	205	Maintain table TQ25 for entry & & & &	Space: object requires documentation	☐
84	206	Catalog type & is no longer available		☐
85	207	Char. &: sampling procedure & does not fit dyn.mod.rule &		☐
86	208	Char. &: sample unit & cannot be used with material &		☐
87	209	Char. &: dyn. mod. criteria cannot be used with plan usage &		☐
88	210	Dyn. modification criteria & not defined for plan usage &		☐
89	211	Char. &: Plan usage has too few dynamic modification criteria		☐
90	212	Inspection characteristics must be maintained for operation &1	Space: object requires documentation	☐
91	213	Insp. Characs Exist for Op. &1 Although Indicator in Control Key Missing	Space: object requires documentation	☐
92	214	No valid task list assignment for char. &1, dependent charac. specs &2	Space: object requires documentation	☐
93	215	Char. &: sampling procedure & cannot be used		☐
94	216	Ch. & : Conflicts with char. & (operation &) due to batch classification	Space: object requires documentation	☐
95	217	Char. &1: Mstr insp. charac. already used in char. &2 (operation &3)	Space: object requires documentation	☐
96	218	Reference to char. & not valid because of dyn. modif.		☐
97	219	Sampling procedure does not fit dyn. mod. rule in char. &		☐
98	220	No suitable characteristic found		☐
99	221	Char. &: Physical-sample drawing text cannot be printed	Space: object requires documentation	☐
100	222	Charac. & : Different smaple unit of measure for same partial sample	Space: object requires documentation	☐
101	223	Charac. & : Cross-operation partial samples are not supported		☐
102	224	Results Rec. by Insp. Unit: No Char. Without Indep. Multiple Samples (&)	Space: object requires documentation	☐
103	225	Op. &1 Results Rec. by Insp. Unit: No Charac. with Single Value Recording	Space: object requires documentation	☐
104	249	Dynamic modification criteria are proposed according to task list usage &	Space: object requires documentation	☐
105	250	Dynamic modification rule & cannot be used		☐
106	251	Insertion increment must be smaller than the increment itself	Space: object requires documentation	☐
107	252	Dynamic modification rule is reset due to the dynamic modification level	Space: object requires documentation	☐
108	253	Define dynamic modification rule &	Space: object requires documentation	☐
109	254	Dynamic modification rule & is not compatible with sampling procedure		☐
110	255	Sampling proc. & is not compatible with dynamic modification rule &		☐
111	256	QM data: Maintain inspection point reference		☐
112	257	QM data: maintain quantity-related data		☐
113	258	QM data: maintain time-related data		☐
114	259	This inspection point completion is not possible for task list type &2	Space: object requires documentation	☐
115	260	Dynamic modification criteria &1 are inconsistent	Space: object requires documentation	☐
116	280	Record an insp. point of type "Freely-defined" or "Phys. sample"	Space: object requires documentation	☐
117	281	Create an inspection point of the type "Physical sample"	Space: object requires documentation	☐
118	286	Sample-drawing procedure only allowed for insp. point type "phys. sample"	Space: object requires documentation	☐
119	288	You cannot define characteristics for standard tasks	Space: object requires documentation	☐
120	289	Inspection point &1 (type &2) is not allowed for this task list type (&3)	Space: object requires documentation	☐
121	290	Inconsistency in plan usage &: dyn. sampling criterion & not available		☐
122	291	Dynamic modification rule &1 is only possible for optional characs	Space: object requires documentation	☐
123	293	No dynamic modification level can be defined for usage &		☐
124	294	Dynamic modification level & already used; & not allowed		☐
125	295	Use & with dynamic modification criterion & already defined in plan		☐
126	296	First delete dynamic modification data for this plan		☐
127	297	No dynamic modification data can be defined for this task list type &	Space: object requires documentation	☐
128	298	Possible dynamic modification levels: initial or 1 (lot level)		☐
129	299	No characteristics can be defined for this plan type		☐
130	300	No dynamic modification rule was selected		☐
131	301	No characteristics available for operation &	Space: object requires documentation	☐
132	302	CUA status (Table TC01) is not maintained		☐
133	303	There are no dependent char. specs available for insp. char. &	Space: object requires documentation	☐
134	304	Assignment already available (compare with entry &)		☐
135	305	Enter a validity time period for the tolerance change	Space: object requires documentation	☐
136	306	Assignment of material & is not available		☐
137	307	There are no assignments		☐
138	308	Plant & is not available		☐
139	309	Screen & is not defined in TQ21		☐
140	310	The characteristic number must be between & and &		☐
141	311	The characteristic number is too large		☐
142	312	The allocation number is too large		☐
143	313	Dependent characteristic specs not possible for task list type &	Space: object requires documentation	☐
144	314	Characteristic & has no reference	Space: object requires documentation	☐
145	315	Characteristic &1: Reference to master inspection char. &2 was cancelled	Space: object requires documentation	☐
146	316	First selected characteristic reached		☐
147	317	Last selected characteristic reached		☐
148	318	Enter a number of classes	Space: object requires documentation	☐
149	319	Enter a target value	Space: object requires documentation	☐
150	320	Enter both tolerance limits	Space: object requires documentation	☐
151	321	Enter a class width greater than 0	Space: object requires documentation	☐
152	322	Characteristic & is not quantitative		☐
153	323	Select a smaller class width	Space: object requires documentation	☐
154	324	First select characteristics (from the list screen)	Space: object requires documentation	☐
155	325	The number of classes is greater than &. Reduce the number	Space: object requires documentation	☐
156	326	The target value is smaller than the lower tolerance		☐
157	327	The class range exceeds the tolerance range		☐
158	328	The class width cannot be determined. Reduce the class number.		☐
159	329	The target value is greater than the upper tolerance		☐
160	330	Enter the characteristic category or specify a control key profile	Space: object requires documentation	☐
161	331	No characteristic available		☐
162	332	Dyn. modification level changed: Check dyn. mod. rule for insp. chars	Space: object requires documentation	☐
163	333	Do not select a number of decimal places greater than &	Space: object requires documentation	☐
164	334	The unit & is not defined (T006)		☐
165	335	Check the sample unit of measure (Proposal: Operation unit of measure)	Space: object requires documentation	☐
166	336	Set the unit tables for unit &	Space: object requires documentation	☐
167	337	Enter a unit	Space: object requires documentation	☐
168	338	Conversion factors automatically calculated		☐
169	339	Short text line must be maintained again	Space: object requires documentation	☐
170	340	Define sampling procedure &	Space: object requires documentation	☐
171	341	Authorization is not allowed		☐
172	342	Maintain inspector qualification &	Space: object requires documentation	☐
173	343	Sampling procedure & cannot be used		☐
174	344	The tolerance range is smaller than the class width entered	Space: object requires documentation	☐
175	345	Enter a dynamic modification rule	Space: object requires documentation	☐
176	346	Class range does not correspond to the tolerance range		☐
177	347	Correct the dyn. modification level (only 0, 1, 3 or init. value allowed)	Space: object requires documentation	☐
178	348	Class range exceeds plausibility range		☐
179	349	There is no characteristic data on the selected screen	Space: object requires documentation	☐
180	350	No master inspection characteristics are defined		☐
181	351	Master inspection characteristic &, plant & is not available		☐
182	352	No valid version found for master inspection characteristic &	Space: object requires documentation	☐
183	353	System error during locking		☐
184	354	Master inspection characteristic &, version & is being processed by &3	Space: object requires documentation	☐
185	355	Master inspection characteristic &1 in version &2 is not released	Space: object requires documentation	☐
186	356	Insp. characteristic & is overwritten by master insp. characteristic		☐
187	357	Check your selections	Space: object requires documentation	☐
188	358	Characteristic &, version & is not available in plant &		☐
189	359	Dependent characteristic specs for referenced insp. char. not allowed	Space: object requires documentation	☐
190	360	Tolerance range cannot be calculated		☐
191	361	Insert interval must be smaller than &		☐
192	362	Choose a class midpoint that is smaller than the upper tolerance	Space: object requires documentation	☐
193	363	Select a new insert position	Space: object requires documentation	☐
194	364	Entry & is positioned (internal)		☐
195	365	Data will be reset	Space: object requires documentation	☐
196	366	Choose a class midpoint greater than the lower tolerance	Space: object requires documentation	☐
197	367	Version & is the current valid version		☐
198	368	Define characteristic weighting &	Space: object requires documentation	☐
199	369	Confirm the sample unit of measure &	Space: object requires documentation	☐
200	370	Set only one indicator for characteristic &: quantitative or qualitative		☐
201	371	Lower tolerance limit is not on class limit	Space: object requires documentation	☐
202	372	Upper tolerance limit is not within class limit	Space: object requires documentation	☐
203	373	Choose a class midpoint that is smaller than the upper plausibility limit	Space: object requires documentation	☐
204	374	Choose a class midpoint that is greater than the lower plausibility limit	Space: object requires documentation	☐
205	375	Only the first selected characteristic is unlocked		☐
206	376	Define share estimate procedure &		☐
207	377	No share estimation procedure was selected		☐
208	378	Share estimation procedure & and control indicator are not compatible		☐
209	379	Select an upper tolerance that is greater than the lower tolerance		☐
210	380	No methods defined		☐
211	381	Method &, version &, plant & is not available		☐
212	382	No valid version found for method &, plant &		☐
213	383	Inspection characteristic & is linked to a class characteristic	Space: object requires documentation	☐
214	384	Method &, version &, plant & is being processed by &4	Space: object requires documentation	☐
215	385	Method &, version &, plant & cannot be used		☐
216	386	Method &, version &, plant & is not assigned to the characteristic		☐
217	387	You cannot assign the method; a reference to the characteristic exists		☐
218	388	Enter a method that is assigned to the master inspection characteristic	Space: object requires documentation	☐
219	389	Method &, version &, plant & is not released		☐
220	390	You cannot insert a characteristic after the last characteristic		☐
221	391	Dependent characteristic specifications will be deleted	Space: object requires documentation	☐
222	392	Dependent characteristic specifications will be checked	Space: object requires documentation	☐
223	393	You have reached the first selected dependent characteristic specs	Space: object requires documentation	☐
224	394	You have reached the last selected dependent characteristic specs	Space: object requires documentation	☐
225	395	No value is available		☐
226	396	Complete the data entry		☐
227	397	Tolerances are reset	Space: object requires documentation	☐
228	398	Only relative tolerances can be defined as depending on a target value		☐
229	399	No measured values are recorded for characteristic &		☐
230	400	Selected set & in plant & for catalog & is not available		☐
231	401	Code group &1 does not exist in catalog &2	Space: object requires documentation	☐
232	402	No valid version for selected set & is available		☐
233	403	No valid version for code group & is available		☐
234	404	Selected set & in plant & cannot be used		☐
235	405	Code group & cannot be used		☐
236	406	Select catalog type (entry &)	Space: object requires documentation	☐
237	407	Code group &2 is currently being processed by &1	Space: object requires documentation	☐
238	408	Selected set &2 in plant &3 is currently being processed by &1	Space: object requires documentation	☐
239	409	Code & in code group & is not maintained		☐
240	410	A valid version for code & & is not available		☐
241	411	Enter a selected set	Space: object requires documentation	☐
242	412	No catalog entry & is assigned		☐
243	413	No master inspection characteristic is assigned		☐
244	414	No inspection method is assigned		☐
245	415	No upper defect code is assigned		☐
246	416	No lower defect code is assigned		☐
247	417	Define catalog type &	Space: object requires documentation	☐
248	418	No selected sets are allowed in catalog type &		☐
249	419	Select another catalog type	Space: object requires documentation	☐
250	420	Enter a selected set or code group	Space: object requires documentation	☐
251	421	You do not have to enter a plant for a code group. Plant will be ignored.		☐
252	422	You did not enter a plant. The plant will be copied from the header		☐
253	423	Check your data	Space: object requires documentation	☐
254	424	No dependent characteristic specifications are available	Space: object requires documentation	☐
255	425	Catalog type & cannot be used in the characteristic		☐
256	426	No sampling procedure assigned		☐
257	427	No dynamic modification rule assigned		☐
258	428	Sequences are not available in plan category &		☐
259	429	Position operation &		☐
260	430	Data will be copied after the cursor position (characteristic &)	Space: object requires documentation	☐
261	431	Select an existing characteristic	Space: object requires documentation	☐
262	432	Characteristic & refers to itself (recursion)		☐
263	433	You cannot copy data to characteristic &	Space: object requires documentation	☐
264	434	Characteristic & also contains a formula		☐
265	435	A formula must not refer to a subsequent characteristic &		☐
266	436	For a calculated characteristic values cannot be recorded in classes		☐
267	437	& &		☐
268	438	Characteristic & is not a calculated characteristic		☐
269	439	SPC criterion & is not defined		☐
270	440	No SPC criterion selected		☐
271	441	SPC criterion & is reset		☐
272	442	SPC criterion can be entered		☐
273	443	No defect code for qualitative rejection assigned		☐
274	444	Cursor is positioned on incorrect line		☐
275	445	Material plan has not yet been assigned		☐
276	446	Charac. & is not used in a material specification for plan materials	Space: object requires documentation	☐
277	447	Maintain procedure for share calculation	Space: object requires documentation	☐
278	448	You must know the characteristic version in order to choose a method	Space: object requires documentation	☐
279	449	There is no long-term characteristic used in the formula		☐
280	450	When you select ENTER, position only exisiting characteristics		☐
281	451	Only position existing dependent characteristic specifications	Space: object requires documentation	☐
282	452	Inspection characteristic &1 already exists	Space: object requires documentation	☐
283	453	Assignment number &1 already exists	Space: object requires documentation	☐
284	454	Conditional characteristic must also be a long-term characteristic		☐
285	455	No dyn. modif. rule is assigned to specified characteristic &		☐
286	456	Only enter a procedure for the dynamic modification rule	Space: object requires documentation	☐
287	457	Test equipment & is not defined for operation	Space: object requires documentation	☐
288	458	Characteristic & will not be changed		☐
289	459	Inspection characteristic has no link to a class characteristic	Space: object requires documentation	☐
290	460	Upper plausibility limit is less than the upper specification limit	Space: object requires documentation	☐
291	461	Upper plausibility limit is less than upper specification limit 1	Space: object requires documentation	☐
292	462	Upper plausibility limit is less than the upper specification limit 2	Space: object requires documentation	☐
293	463	Lower plausibility limit is greater than the lower specification limit	Space: object requires documentation	☐
294	464	Lower plausibility limit is greater than the lower specification limit 1	Space: object requires documentation	☐
295	465	Lower plausibility limit is greater than the lower specification limit 2	Space: object requires documentation	☐
296	466	Target value is less than the lower specification limit 1	Space: object requires documentation	☐
297	467	Target value is greater than the upper specification limit 1	Space: object requires documentation	☐
298	468	Target value is less than the lower specification limit 2	Space: object requires documentation	☐
299	469	Target value is greater than upper specification limit 2	Space: object requires documentation	☐
300	470	Target value is greater than the upper plausibility limit	Space: object requires documentation	☐
301	471	Target value is less than the lower plausibility limit	Space: object requires documentation	☐
302	472	Target value is greater than the upper specification limit	Space: object requires documentation	☐
303	473	Target value is less than the lower specification limit	Space: object requires documentation	☐
304	474	Entering a dynamic modification rule is not allowed	Space: object requires documentation	☐
305	475	No formula is defined for the inspection characteristic	Space: object requires documentation	☐
306	476	No test equipment assigned	Space: object requires documentation	☐
307	477	Item number &1 for the test equipment of operation &2 is not clear	Space: object requires documentation	☐
308	480	The current valid version of &1 is not released	Space: object requires documentation	☐
309	481	You can only use vendor or cust. selection criteria with ref. to a mat.	Space: object requires documentation	☐
310	482	No characteristics could be determined with your specifications	Space: object requires documentation	☐
311	483	Identifier incomplete: You must uniquely specify object-dep. char. spec.	Space: object requires documentation	☐
312	490	Tolerance change: from-date is greater than the to-date		☐
313	491	Time period of the tolerance change is not within the validity range		☐
314	493	Tolerance change exceeds the upper plausibility limit		☐
315	494	Tolerance change falls below the lower plausibility limit		☐
316	497	Enter a time period for the tolerance change		☐
317	498	Only status & is allowed	Space: object requires documentation	☐
318	500	Unit & cannot be converted into the operation unit &	Space: object requires documentation	☐
319	501	Sample unit &1 is not compatible with task list unit of measure &		☐
320	502	Mark inspection characteristics for deletion	Space: object requires documentation	☐
321	503	Mark dependent characteristic specifications for deletion	Space: object requires documentation	☐
322	504	Non-relevant fields will be initialized		☐
323	505	Unit & cannot be converted in header unit of measure &	Space: object requires documentation	☐
324	506	Internal errors are initialized by the system (&1)	Space: object requires documentation	☐
325	507	Consistency check: Field is initialized (&1 &2)	Space: object requires documentation	☐
326	516	The entry is not reccognized as a selected set	Space: object requires documentation	☐
327	520	You have not assigned the insp. point description in the task list header	Space: object requires documentation	☐
328	522	Dynamic modification level was initialized for task list usage &1	Space: object requires documentation	☐
329	523	Dynamic modification rule was initialized for task list usage &	Space: object requires documentation	☐
330	524	Replace sampling procedure for inspection characteristics if required	Space: object requires documentation	☐
331	538	Check characteristic number &	Space: object requires documentation	☐
332	539	Check assignment number &	Space: object requires documentation	☐
333	540	Enter characteristic number	Space: object requires documentation	☐
334	541	Enter increment	Space: object requires documentation	☐
335	550	Discrepancy between memory and memory management of operation data		☐
336	560	Enter the plant for the master inspection characteristic &	Space: object requires documentation	☐
337	565	Check the target value. A tolerance key is used	Space: object requires documentation	☐
338	566	No relative specification limits defined for target value	Space: object requires documentation	☐
339	570	Check the interval reference	Space: object requires documentation	☐
340	571	Check the selected set	Space: object requires documentation	☐
341	572	No code was selected		☐
342	573	All selected sets are used for the selection		☐
343	574	The tolerance key is being reset	Space: object requires documentation	☐
344	575	No authorization to change characteristics. You can only display them	Space: object requires documentation	☐
345	576	Error during authorization check. Contact your system administrator	Space: object requires documentation	☐
346	577	You are not authorized to include characteristic &1 &2 &3	Space: object requires documentation	☐
347	578	Ch &1: You are not authorized to include insp. method &2 &3 &4	Space: object requires documentation	☐
348	579	Charac. &1: Deselecting "Calculate formula" indicator	Space: object requires documentation	☐
349	580	Charac. &1: Link exists to dynamic modification for characteristic &2	Space: object requires documentation	☐
350	581	Charac. &1: Cancelling test equipment assignment	Space: object requires documentation	☐
351	582	Characteristic &1 is a conditional characteristic	Space: object requires documentation	☐
352	585	CH &2: There is more than one selected set for catalog &1	Space: object requires documentation	☐
353	600	Last selected operation reached		☐
354	601	Check the selections for the operation	Space: object requires documentation	☐
355	602	First selected operation reached		☐
356	615	Tolerance & is not defined		☐
357	616	Fields that are dependent on the tolerance key will not be copied	Space: object requires documentation	☐
358	617	Copying characteristic data from the tolerance key	Space: object requires documentation	☐
359	620	Define the control key profile &	Space: object requires documentation	☐
360	621	Control indicator and tolerance key are not compatible	Space: object requires documentation	☐
361	622	Limit values and class definitions were reset		☐
362	623	Target value is set to zero (relative tolerances)		☐
363	624	Lower relative specification limit is not negative	Space: object requires documentation	☐
364	625	Tolerance change results in an incorrect tolerance range		☐
365	626	Tolerance change not compatible with the target value		☐
366	627	Upper relative specification limit not positive	Space: object requires documentation	☐
367	630	Conflict for at least 1 characteristic due to change number	Space: object requires documentation	☐
368	631	Conflict for at least 1 dep. char. spec. due to change number	Space: object requires documentation	☐
369	638	Expand class width	Space: object requires documentation	☐
370	645	Upper limit for the copy interval is overwritten with &	Space: object requires documentation	☐
371	648	You have not entered a distribution type for a quantitative character.		☐
372	650	You cannot delete a characteristic that is referenced in plans		☐
373	651	You cannot delete dependent characteristic specs referenced in plans	Space: object requires documentation	☐
374	659	Data for dependent characteristic specifications (&1) are not consistent	Space: object requires documentation	☐
375	660	The inspection characteristic data &1 is inconsistent	Space: object requires documentation	☐
376	661	The key for the master insp. characteristic & was not completely entered	Space: object requires documentation	☐
377	662	You do not have authorization (&) to assign master data	Space: object requires documentation	☐
378	663	The key for inspection method & was not completely entered	Space: object requires documentation	☐
379	664	Master insp. characteristic & & & cannot be referenced (inconsistent)	Space: object requires documentation	☐
380	670	Enter an upper specification limit	Space: object requires documentation	☐
381	671	Enter a lower specification limit	Space: object requires documentation	☐
382	672	Enter a class number, class width and class midpoint	Space: object requires documentation	☐
383	673	Enter a formula for calculating characteristic results	Space: object requires documentation	☐
384	674	Enter a target value	Space: object requires documentation	☐
385	675	Error when reading a change indicator	Space: object requires documentation	☐
386	676	Error when writing the change indicator status	Space: object requires documentation	☐
387	677	Enter a key for input processing	Space: object requires documentation	☐
388	700	No assignment available for the plan		☐
389	701	Dependent characteristic specifications are also deleted	Space: object requires documentation	☐
390	702	The changes are copied to dependent characteristic specifications	Space: object requires documentation	☐
391	711	An internal error occurred when you called up the function	Space: object requires documentation	☐
392	712	No entry was found using the classification system	Space: object requires documentation	☐
393	713	No entry was selected	Space: object requires documentation	☐
394	750	Error during transfer to report RQPAAS00		☐
395	800	No task list characteristics were selected	Space: object requires documentation	☐
396	801	No task lists were selected	Space: object requires documentation	☐
397	803	No task list was found for the material	Space: object requires documentation	☐
398	804	Only materials without a deletion flag are displayed	Space: object requires documentation	☐
399	850	No master record for characteristic & & & is available		☐
400	851	Master inspection characteristic &1 &2 &3 cannot be replaced	Space: object requires documentation	☐
401	852	Inspection characteristic will be replaced by itself	Space: object requires documentation	☐
402	853	No master record is available for inspection method & & &		☐
403	854	Key date cannot be in the past		☐
404	855	You must enter a key date		☐
405	856	You must enter a version for the new master inspection characteristic	Space: object requires documentation	☐
406	857	Method & & & is not assigned to the new master inspection characteristic		☐
407	858	Master inspection characteristic &1 &2 &3 is not released	Space: object requires documentation	☐
408	859	The line position is not valid		☐
409	860	No errors have occurred		☐
410	861	You can select only one line		☐
411	862	First select a line	Space: object requires documentation	☐
412	863	The replacement was completed. Read the protocol.	Space: object requires documentation	☐
413	864	A session with the name & was created		☐
414	865	Key date is overwritten with date from change number		☐
415	866	Master inspection characteristic & & & is not completely maintained	Space: object requires documentation	☐
416	867	The new characteristic is a calculated characteristic	Space: object requires documentation	☐
417	868	If necessary, assignment of test equipment must be changed	Space: object requires documentation	☐
418	869	SPC criterion not specified for sampling procedure &	Space: object requires documentation	☐
419	870	No master record is available for method & & &		☐
420	871	No valid use is available for inspection method & & &		☐
421	872	You must enter a version for the new inspection method		☐
422	873	Dynamic modification rule & is not compatible with sampling procedure &	Space: object requires documentation	☐
423	874	Master insp. characteristic &1 &2 &3 does not have a valid use in plans	Space: object requires documentation	☐
424	875	Master inspection characteristic is not used in any material spec.	Space: object requires documentation	☐
425	876	There is no link between a master inspection char. and a class char.	Space: object requires documentation	☐
426	877	Replacement with master inspection characteristic &1 &2 &3 not possible	Space: object requires documentation	☐
427	878	The master inspection char. is not used in any certificate profile	Space: object requires documentation	☐
428	879	See long text for reasons for lock indicator		☐
429	880	No entry found for catalog type & code group &		☐
430	881	Code groups from catalog type 1 are not used in plans		☐
431	882	Enter a catalog type	Space: object requires documentation	☐
432	883	Enter a code group	Space: object requires documentation	☐
433	884	Information for copying task list data		☐
434	885	Select one of the pushbuttons		☐
435	886	Enter a sampling procedure	Space: object requires documentation	☐
436	887	You must enter a sampling procedure for inspection points		☐
437	888	You must enter an SPC criterion		☐
438	889	You must enter a dynamic modification rule		☐
439	890	Function not supported for task list type &	Space: object requires documentation	☐
440	891	Select other characteristic/assignment number or other change number	Space: object requires documentation	☐
441	892	Referenced multiple specifications cannot be updated	The short text describes the object sufficiently	☐

History

Last changed on/by	19970521	SAP
SAP Release Created in