Hierarchy
⤷ LO-WTY (Application Component) Warranty Claim Processing
⤷ ISAUTO_WTY (Package) Warranty Processing
Basic Data
Data Element | WTY_RELOB_EXT |
Short Description | External Object Number |
Data Type
Category of Dictionary Type | D | Domain |
Type of Object Referenced | No Information | |
Domain / Name of Reference Type | WTY_RELOB | |
Data Type | CHAR | Character String |
Length | 40 | |
Decimal Places | 0 | |
Output Length | 40 | |
Value Table |
Further Characteristics
Search Help: Name | ||
Search Help: Parameters | ||
Parameter ID | ||
Default Component name | ||
Change document | ||
No Input History | ||
Basic direction is set to LTR | ||
No BIDI Filtering |
Field Label
Length | Field Label | |
Short | 10 | ExtObjNo |
Medium | 15 | Ext. Obj. No. |
Long | 30 | External Object Number |
Heading | 20 | Ext. Object Number |
Documentation
Definition
Object number for the object master record that uniquely identifies the object to which the warranty claim refers.
Use
Object master and object number serve to link the warranty claim to an object.
It is not absolutely necessary to link the warranty claim to an object. No object entry is required, for example, for a claim for an accessory (such as a ski compartment for the roof of a car).
Note: this field is case-sensitive.
Dependencies
Example
The object number for vehicles is the VIN (vehicle identification number), in other words the international standard 17-character number that identifies a vehicle uniquely worldwide and that is created in the maufacturer's system when the vehicle is assembled.
You can link in other object master records, read additional object data and make different entries for the object number using BADI WTY_READ_SUPPL_DATA.
You can then use BAdI WTY_F4_RELOB to adapt the F4 search help to the external object number.
Supplementary Documentation - WTY_RELOB_EXT0001
Use
The reference object serves as reference for the manual creation of object master records, which affects the measurement positions. For equipment it can be used as a complete template for copying, for installed bases and functional locations it serves as a reference for creating measurement positions manually.
If a reference object serves as a copy template when you create a warranty object, the measurement positions for the template object are copied to the object and several measuring points are created for it. Measurement values can then be entered in the warranty claim for these measuring points. These measurement values can then be compared with the allowed maximum values in the master warranty within the framework of the warranty check, i.e. the check that analyzes whether a warranty exists for the object.
Dependencies
The reference object on version level can have any amount of measurement positions relevant to warranty processing. The reference object on item level should only have exactly exactly one measurement position relevant to warranty processing; otherwise the measurement position last created in the reference object is used.
Example
History
Last changed by/on | SAP | 20030326 |
SAP Release Created in | 46C2 |