Hierarchy
EA-FIN (Software Component) EA-FIN⤷
RE-FX-BD (Application Component) Basic Data⤷
RE_BD_RO (Package) RE: Rental Object Master Data
Basic Data
| Data Element | REBDRLRAPERCENT |
| Short Description | Percentage for Positioning RU in RLR Spread |
Data Type
| Category of Dictionary Type | D | Domain |
| Type of Object Referenced | No Information | |
| Domain / Name of Reference Type | DECV3_2 | |
| Data Type | DEC | Counter or amount field with comma and sign |
| Length | 5 | |
| Decimal Places | 2 | |
| Output Length | 7 | |
| Value Table |
Further Characteristics
| Search Help: Name | ||
| Search Help: Parameters | ||
| Parameter ID | ||
| Default Component name | PERC_VAL_FOR_GROUPING_IN_RLR | |
| Change document | ||
| No Input History | ||
| Basic direction is set to LTR | ||
| No BIDI Filtering |
Field Label
| Length | Field Label | |
| Short | 10 | Percentage |
| Medium | 15 | Percentage |
| Long | 20 | Perc.f.RLR Position |
| Heading | 4 | Perc |
Documentation
Use
You can use this field to modify the starting value of the representative list of rents spread. This means you can position the rental object more exactly within this margin (spread). To do so, you enter the percentage that the selected base value should differ in relation to the value at the other end of the spread. The position of the rental object is then as follows, depending on the base value and percentage value:
Lower Value Middle Value Upper Value
Base | | |
Lower Value 0% +100%
Middle Value -100% 0% +100%
Upper Value -100% 0%
Examples
You want to position a rental object in a representative list of rents label with the following values:
Lower Value: 6.80
Middle Value: 7.00
Upper Value: 7.40
Example 1
Base value: Lower Value
Fine Positioning: + 20%
Rent: 6.80 + 20% * (7.40 - 6.80) = 6.92
Example 2
Base value: Middle Value
Fine Positioning: - 60%
Rent: 7.00 - 60% * (7.00 - 6.80) = 6.88
Notes
The middle value in the representative list of rents spread is usually not the same as the arithmetic average of the upper and lower values. Therefore, you also do not obtain the average if you enter the Lower Value as base and 50% as the percentage, or Upper Value as base and -50%.
History
| Last changed by/on | SAP | 20031111 |
| SAP Release Created in | 500 |
