SAP ABAP Data Element GASTEXT (Type of gas billing)
Hierarchy
☛
IS-UT (Software Component) SAP Utilities/Telecommunication
⤷
IS-U-BI (Application Component) Contract Billing
⤷
EE20 (Package) IS-U: Billing

⤷

⤷

Basic Data
Data Element | GASTEXT |
Short Description | Type of gas billing |
Data Type
Category of Dictionary Type | D | Domain |
Type of Object Referenced | No Information | |
Domain / Name of Reference Type | GASABART | |
Data Type | CHAR | Character String |
Length | 2 | |
Decimal Places | 0 | |
Output Length | 2 | |
Value Table |
Further Characteristics
Search Help: Name | ||
Search Help: Parameters | ||
Parameter ID | ||
Default Component name | ||
Change document | ||
No Input History | ||
Basic direction is set to LTR | ||
No BIDI Filtering |
Field Label
Length | Field Label | |
Short | 10 | GasBi.type |
Medium | 15 | Gas bill. type |
Long | 20 | Gas billing type |
Heading | 2 | GB |
Documentation
Diagnosis
The specified gas procedure does not correspond to the technical description of the register.
System Response
Procedure
Use possible entries help (F4) to display the gas procedures that are permitted in this case, then select an appropriate one.
If the gas procedure you want to select is not proposed, observe the following selection criteria:
- The billing class and gas billing type are determined from the rate category. All gas procedures that have this billing class and gas billing type and are not set as inactive are included in the possible entries.
- The system checks in the volume correction factor procedure of the respective gas procedures that the nominal load and the measured pressure for the device/register are within the defined ranges.
- The thermal gas billing factors (Therm.gas bill. field) must be the same in the volume correction factor procedure and in the register.
A gas procedure is only permissible if it meets all of the above requirements.
Use
Determines the conversion factor for the measured operating cubic meters as follows:
Gas billing type Conversion factor
Thermal Vol. corr.factor
(= standard volume: operating volume)
* calorific value
Acc. to standard
cubic meters Volume correction factor
Volumetric 1
History
Last changed by/on | SAP | 20050223 |
SAP Release Created in |