SAP ABAP IMG Activity EHS_MD_110_05_4 (Check Identification Listing)
Hierarchy
☛ EA-APPL (Software Component) SAP Enterprise Extension PLM, SCM, Financials
   ⤷ EHS (Application Component) Environment, Health and Safety
     ⤷ CBIMG1 (Package) EH&S: IMG Migration
IMG Activity
ID EHS_MD_110_05_4 Check Identification Listing  
Transaction Code S_SH8_72000943   IMG Activity: EHS_MD_110_05_4 
Created on 19990122    
Customizing Attributes EHS_MD_110_05_4   Check identification listing 
Customizing Activity EHS_MD_110_05_4   Check identification listing 
Document
Document Class SIMG   Hypertext: Object Class - Class to which a document belongs.
Document Name EHS_MD_110_05_4    

Use

In this IMG activity, you check the identification listings delivered in the standard system. These determine which identifiers are displayed in screens or lists.

The programs in the SAP component Environment, Health and Safety are linked to the identification listings specified here via coding. You cannot therefore change the keys for the identification listings, you can only specify the following:

  • You can change the assignment of identification category and identification type for each position.
  • You can specify a regulatory list for each position. The identifier is then only displayed if this regulatory list is assigned to it.
  • You can specify a number of identifiers for each position that are then displayed based on the specified priority. This means, if the identifier with priority 1 exists it is displayed, if not the identifier with priority 2 is displayed, and so on.
  • You can assign a specification category for each position and thus control the display of identifiers in the hit list depending on the specification category.

To control the display of identifiers in the report according to their characteristics, you can use the IMG activity Assign Characteristic-Specific Identification.

Example

The identification listing D_DEFAULT is used if an identification listing that is required at a certain location in the program is not defined in this activity. In the standard system, identifiers are displayed as follows with D_DEFAULT:

  • First, the CAS number or, if not available, the EINECS number is displayed.
  • Second, the product name or, if not available, the IUPAC name is displayed.
  • Third, the structural formula and, if not available, the total formula is displayed.

The identification listing D_HITLIST is used in the following places:

  • In the workbench hit list, the identifiers are displayed as follows:
    • Column 1 contains the specification key.
    • Column 2 contains the specification type.
    • The following columns contain the identifiers as of position 1 of the identification listing D_HITLIST, that is, column 3 contains that for position 1, column 4 that for position 2, and so on.
    • The last column contains the value (such as the identifier or material) that fulfilled the search criteria and therefore led to the entry being included in the hit list. If no such value exists, this column is hidden.
    • Columns that are completely empty are suppressed, for example, if a specific identifier does not exist for all specifications in the hit list.
    • You can adapt the layout of the hit list (column position and content) to suit your requirements using the user exits of the category SPE_HITLST (see Manage User Exits).
  • In the upper screen areas of the header data and value assignment types for specifications, three identifiers are displayed: those that have the three lowest position numbers in the identification listing D_HITLIST. If an identifier is missing, the system uses the identifier with the next highest position number until three identifiers are displayed.
  • In the detail structure of the specification workbench, in addition to the key of the current specification under Description, an identifier is displayed: that with the lowest position number in the identification listing D_HITLIST. If an identifier is missing, the system uses the identifier with the next highest position number until it can display one.

The identification listing D_REFVAL is used in the following places:

  • If value assignments are transferred from one specification to another by referencing, the system displays the source specification in the property tree following the value assignments whose data is transferred by reference, meaning the specification from which data originates. It uses the identifier that is specified in the identification listing D_REFVAL at position 1.
  • If you want to edit a referenced value assignment, an error message is displayed. In the long text for this message, the system indicates the source specification of the reference. To do this, it uses the identifier for this specification that is specified in the identification listing D_REFVAL at position 1.

    In the property tree and in the message, the system displays only the identifier that is specified at position 1 in the identification listing D_REFVAL, meaning that if this one does not exist, it does not display the identifier at position 2. You can, however, specify a number of identifiers with different priorities in D_REFVAL for position 1.

Standard settings

The following identification listings are provided in the standard system:

Identification Listing    Description

D_BOMBOS    Identifiers for Bill of Material Transfer

D_BW    Identifiers for Extraction into BW

D_DANGOOD    Identifiers for Dangerous Goods

D_DEFAULT    Standard Listing for Identifiers

D_DGHIS    Hazard Inducers

D_F4HELP    Specification Identifiers in Input Help

D_FORMULA    Identifiers for Formula

D_FRM_SUB    Substance Views for Formula

D_HITLIST    Identifiers in Hit List

D_IESCREEN    Identifiers for Display when Importing Specifications

D_IESEARCH    Identifiers for Searching when Importing Specifications

D_IHEXPOS    Agents in Industrial Hygiene and Safety

D_MATNAM    Identifiers as Replacement for Material Names

D_MGEF    Identifier for Filling Table MGEF (Warehouse Management)

D_REFSUBST    Identifiers of References in Specification Header Data

D_REFVAL    Identifier for Referenced Value Assignment

D_SARA    CAS Number (1), Chem. Name (2), CAS Cat. (3) for SARA 311/312 Tier II

D_SRRLIST    Identifier for List of Report Bodies

D_SVT    Identifiers for Substance Volume Tracking

D_TRM_ADNR    Tremcard Number ADNR

D_TRM_ADR    Tremcard Number ADR/GGVS

D_TRM_GGVE    Tremcard Number GGVE/RID

D_TSCA12B    Identifier for TSCA 12B Listing (Substance Volume Tracking)

D_TSIDLID    Identifiers for Trade Secret

D_VALPOS    Identifiers in the Component Overview

D_WASTECOD    Identifiers for Waste Codes

Activities

Check the identifiers and the way they are arranged. Adapt them to suit your requirements if necessary.

Further notes

  • For export and import, certain identification listings must exist. These are entered in Customizing under Check Basic Settings.
  • The following identification listings are not shipped with the standard system and must be installed and configured independently:

Identification Listing    Description

D_INHERIT    Identifiers for Inherited Specifications

Business Attributes
ASAP Roadmap ID 203   Establish Master Data 
Mandatory / Optional 2   Optional activity 
Critical / Non-Critical 2   Non-critical 
Country-Dependency A   Valid for all countries 
Assigned Application Components
Documentation Object Class Documentation Object Name Current line number Application Component Application Component Name
SIMG EHS_MD_110_05_4 0 HLA0003436 O  
SIMG EHS_MD_110_05_4 1 ALR0000066 O  
SIMG EHS_MD_110_05_4 2 SH10000011 O  
SIMG EHS_MD_110_05_4 3 SH10000012 Exposure Management 
SIMG EHS_MD_110_05_4 4 /PLMI/E5C0000032  
Maintenance Objects
Maintenance object type C   Customizing Object 
Assigned objects
Customizing Object Object Type Transaction Code Sub-object Do not Summarize Skip Subset Dialog Box Description for multiple selections
VC_TCG26 C - View cluster SM34 EHS_01 Check identification display 
History
Last changed by/on SAP  20091005 
SAP Release Created in 46C