Data Element list used by SAP ABAP Table ROXEE60123 (Function location extension table)
SAP ABAP Table
ROXEE60123 (Function location extension table) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
![]() |
![]() |
|||
1 | ![]() |
AD_ADDRNUM | Address number | |
2 | ![]() |
BOOLE_D | Data element for domain BOOLE: TRUE (='X') and FALSE (=' ') | |
3 | ![]() |
DATUM | Date | |
4 | ![]() |
GHO_CHOKE_SIZE_UOM | Choke Size - Unit of Measure | |
5 | ![]() |
GHO_CHOKE_SIZE_VAL | Choke Size - Unit of Measure | |
6 | ![]() |
GHO_COMMINGLED_WC_IND | Commingled Well Completion Indicator | |
7 | ![]() |
GHO_COMP_DP_FIRST | Discharge Pressure 1st Stage | |
8 | ![]() |
GHO_COMP_DP_SECOND | Discharge Pressure 2nd Stage | |
9 | ![]() |
GHO_COMP_DT | Discharge Temperature | |
10 | ![]() |
GHO_COMP_POWER | Compressor Power | |
11 | ![]() |
GHO_COMP_SP_FIRST | Suction Pressure 1st Stage | |
12 | ![]() |
GHO_COMP_SP_SECOND | Suction Pressure 2nd Stage | |
13 | ![]() |
GHO_COMP_TYPE | Compressor Type | |
14 | ![]() |
GHO_CONCESSION | Concession | |
15 | ![]() |
GHO_DEH_TYPE | Dehydrator Type | |
16 | ![]() |
GHO_DESN_TEMP | Design Temperature | |
17 | ![]() |
GHO_DESN_TEMP | Design Temperature | |
18 | ![]() |
GHO_DIAM | Pipeline Diameter | |
19 | ![]() |
GHO_DIAM | Pipeline Diameter | |
20 | ![]() |
GHO_DT_UOM | Design Temperature | |
21 | ![]() |
GHO_DT_UOM | Design Temperature | |
22 | ![]() |
GHO_ELEVATION_REF | Elevation Reference | |
23 | ![]() |
GHO_EXTENAL_ID | Unique External ID | |
24 | ![]() |
GHO_FIELD | Field | |
25 | ![]() |
GHO_FLD_SYS_OBJ_ID | Field System Object ID | |
26 | ![]() |
GHO_FLD_SYS_OBJ_ID | Field System Object ID | |
27 | ![]() |
GHO_HT_CONFIG | Heater Treater Configuration | |
28 | ![]() |
GHO_HT_TMECH | Heater Treater- Treater Mechanism | |
29 | ![]() |
GHO_LFS | Length of Flare Stack | |
30 | ![]() |
GHO_LPL | Length of Pipeline | |
31 | ![]() |
GHO_MFOLD_DESN_PRE | Manifold Design Pressure | |
32 | ![]() |
GHO_MFOLD_DP_UOM | Manifold Design Pressure UoM | |
33 | ![]() |
GHO_MII_INSTANCE | System ID | |
34 | ![]() |
GHO_MTR_DESCR | Meter Description | |
35 | ![]() |
GHO_MTR_DESN_PRE | Meter Design Pressure | |
36 | ![]() |
GHO_MTR_DESN_TEMP | Meter Design Temperature | |
37 | ![]() |
GHO_MTR_DP_UOM | Meter Design Pressure UoM | |
38 | ![]() |
GHO_MTR_DT_UOM | Meter Design Temperature UoM | |
39 | ![]() |
GHO_MTR_LIQD_RATIO_FRAC | Meter Water / Liquid Ratio | |
40 | ![]() |
GHO_MTR_LIQD_RAT_UI | Meter Water / Liquid Ratio for UI | |
41 | ![]() |
GHO_MTR_LQD_VOL_FRAC | Meter Liquid / Volume Fraction | |
42 | ![]() |
GHO_MTR_LQD_VOL_UI | Meter Liquid / Volume Fraction for UI | |
43 | ![]() |
GHO_MTR_LVRF_UOM | Meter Liquid Viscosity Range From UoM | |
44 | ![]() |
GHO_MTR_LVRT_UOM | Meter Liquid Viscosity Range To UoM | |
45 | ![]() |
GHO_MTR_LVR_FROM | Meter Liquid Viscosity Range From | |
46 | ![]() |
GHO_MTR_LVR_TO | Meter Liquid Viscosity Range To | |
47 | ![]() |
GHO_MTR_OP_MODE | Meter Operating Mode | |
48 | ![]() |
GHO_MTR_OP_PRE | Meter Operating Pressure | |
49 | ![]() |
GHO_MTR_OP_TEMP | Meter Operating Temperature | |
50 | ![]() |
GHO_MTR_OP_UOM | Meter Operating Pressure UoM | |
51 | ![]() |
GHO_MTR_OT_UOM | Meter Operating Temperature UoM | |
52 | ![]() |
GHO_MTR_TYPE | Meter Type | |
53 | ![]() |
GHO_MTR_VOL_FRA | Meter Gas / Volume Fraction | |
54 | ![]() |
GHO_NETOBJ_TYPE | Network Object Type | |
55 | ![]() |
GHO_OFS | Orientation of Flare Stack | |
56 | ![]() |
GHO_OP_TEMP | Operating Temperature | |
57 | ![]() |
GHO_OP_TEMP | Operating Temperature | |
58 | ![]() |
GHO_OT_UOM | Operating Temperature UoM | |
59 | ![]() |
GHO_OT_UOM | Operating Temperature UoM | |
60 | ![]() |
GHO_PE_OPERATOR | Oil and Gas Entity Operator | |
61 | ![]() |
GHO_PIPEMATNR | Pipeline Material | |
62 | ![]() |
GHO_PIPE_DESN_PRE | Pipeline Design Pressure | |
63 | ![]() |
GHO_PIPE_DP_UOM | Pipeline Design Pressure UoM | |
64 | ![]() |
GHO_PN_START_BUS_DAY | Start of Business day | |
65 | ![]() |
GHO_PN_TZ | Production Network Time Zone | |
66 | ![]() |
GHO_PUMP_APPL | Application | |
67 | ![]() |
GHO_PUMP_DESCR | Pump Description | |
68 | ![]() |
GHO_PUMP_DESIGN | Pump Design | |
69 | ![]() |
GHO_PUMP_DIS_PRES | Discharge Pressure | |
70 | ![]() |
GHO_PUMP_DRIVER | Type of Driver | |
71 | ![]() |
GHO_PUMP_FLUID | Fluid Handled | |
72 | ![]() |
GHO_PUMP_POW_RATE | Power Rating | |
73 | ![]() |
GHO_PUMP_SPEED | Pump Speed | |
74 | ![]() |
GHO_PUMP_SUC_PRES | Suction Pressure | |
75 | ![]() |
GHO_PUMP_TYPE | Pump Type | |
76 | ![]() |
GHO_RESERVOIR | Reservoir | |
77 | ![]() |
GHO_SEP_DESN_PREESURE | Separator Design Pressure | |
78 | ![]() |
GHO_SEP_DESN_TEMP | Separator Design Temperature | |
79 | ![]() |
GHO_SEP_OPR_PREESURE | Operating Pressure | |
80 | ![]() |
GHO_SEP_OPR_TEMP | Operating Temperature | |
81 | ![]() |
GHO_SEP_UOS | Use of Separator | |
82 | ![]() |
GHO_TANK_ID | Tank ID | |
83 | ![]() |
GHO_TANK_TYPE | Tank Type | |
84 | ![]() |
GHO_TB_DPR | Turbine Power Rating (Design) | |
85 | ![]() |
GHO_TB_DPR_UOM | Turbine Power Rating (Design) UoM | |
86 | ![]() |
GHO_TB_FL_TYPE | Turbine Fuel Type | |
87 | ![]() |
GHO_TB_OPR | Turbine Power Rating (Operating) | |
88 | ![]() |
GHO_TB_OPR_UOM | Power Rating (Operating) UoM | |
89 | ![]() |
GHO_TB_SPD | Turbine Speed | |
90 | ![]() |
GHO_TB_SPD_UOM | Turbine Speed UoM | |
91 | ![]() |
GHO_TB_TYPE | Turbine Type of Driven Unit | |
92 | ![]() |
GHO_UOM | Unit of Measure | |
93 | ![]() |
GHO_UOM | Unit of Measure | |
94 | ![]() |
GHO_UOM | Unit of Measure | |
95 | ![]() |
GHO_UOM | Unit of Measure | |
96 | ![]() |
GHO_UOM | Unit of Measure | |
97 | ![]() |
GHO_UOM | Unit of Measure | |
98 | ![]() |
GHO_UOM | Unit of Measure | |
99 | ![]() |
GHO_UOM | Unit of Measure | |
100 | ![]() |
GHO_UOM | Unit of Measure | |
101 | ![]() |
GHO_UOM | Unit of Measure | |
102 | ![]() |
GHO_UOM | Unit of Measure | |
103 | ![]() |
GHO_UOM | Unit of Measure | |
104 | ![]() |
GHO_UOM | Unit of Measure | |
105 | ![]() |
GHO_UOM | Unit of Measure | |
106 | ![]() |
GHO_UOM | Unit of Measure | |
107 | ![]() |
GHO_UOM | Unit of Measure | |
108 | ![]() |
GHO_UOM | Unit of Measure | |
109 | ![]() |
GHO_UOM | Unit of Measure | |
110 | ![]() |
GHO_UOM | Unit of Measure | |
111 | ![]() |
GHO_UOM | Unit of Measure | |
112 | ![]() |
GHO_UOM | Unit of Measure | |
113 | ![]() |
GHO_UOM | Unit of Measure | |
114 | ![]() |
GHO_WC_HGR_DPT | WC Hanger Depth | |
115 | ![]() |
GHO_WC_NAME | Well Completion Name | |
116 | ![]() |
GHO_WC_NAME_ALT | Alternative Well Completion Name | |
117 | ![]() |
GHO_WC_PERF_FRM | WC Perforation From | |
118 | ![]() |
GHO_WC_PERF_TO | WC Perforation To | |
119 | ![]() |
GHO_WC_REF_ID | Well Reference | |
120 | ![]() |
GHO_WC_SHOE_DPT | WC Shoe Depth | |
121 | ![]() |
GHO_WC_TYPE | Well Completion Type | |
122 | ![]() |
GHO_WELL_COMPL_DATE | Well Completion Date | |
123 | ![]() |
GHO_WELL_CONN_DATE | Connection Date | |
124 | ![]() |
GHO_WELL_NAME | Well Name | |
125 | ![]() |
GHO_WELL_NAME_ALT | Alternative Well Name | |
126 | ![]() |
GHO_WELL_PLUG_ABANDON_DATE | Well Plug and Abandon Date | |
127 | ![]() |
GHO_WELL_SHORE_IND | Well Shore Indicator | |
128 | ![]() |
GHO_WELL_SUBSURFACE_IND | Well Subsurface Indicator | |
129 | ![]() |
GHO_WELL_TVD | True Vertical Depth | |
130 | ![]() |
GHO_WELL_TYPE | Well Type | |
131 | ![]() |
GHO_WTHICK | Wall Thickness of Pipeline | |
132 | ![]() |
GHO_WTYPE | Well Test Type | |
133 | ![]() |
GHO_WTYPE | Well Test Type | |
134 | ![]() |
LGORT_D | Storage location | |
135 | ![]() |
MANDT | Client | |
136 | ![]() |
MEINS | Base Unit of Measure | |
137 | ![]() |
MEINS | Base Unit of Measure | |
138 | ![]() |
MEINS | Base Unit of Measure | |
139 | ![]() |
MEINS | Base Unit of Measure | |
140 | ![]() |
NETID | Network identification | |
141 | ![]() |
PLNAL | Group Counter | |
142 | ![]() |
PLNAL | Group Counter | |
143 | ![]() |
PLNNR | Key for Task List Group | |
144 | ![]() |
PLNNR | Key for Task List Group | |
145 | ![]() |
PLNTY | Task List Type | |
146 | ![]() |
PLNTY | Task List Type | |
147 | ![]() |
PM_AUFART | Order Type for Maintenance Orders | |
148 | ![]() |
PM_AUFART | Order Type for Maintenance Orders | |
149 | ![]() |
TPLNR | Functional Location |