Table/Structure Field list used by SAP ABAP Program LQMEXF01 (Include LQMEXF01)
SAP ABAP Program
LQMEXF01 (Include LQMEXF01) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
![]() |
![]() |
|||
1 | ![]() |
AFVC - APLZL | General counter for order | |
2 | ![]() |
AFVC - ARBID | Object ID of the resource | |
3 | ![]() |
AFVC - AUFPL | Routing number of operations in the order | |
4 | ![]() |
AFVC - PLNAL | Group Counter | |
5 | ![]() |
AFVC - PLNKN | Number of the task list node | |
6 | ![]() |
AFVC - PLNNR | Key for Task List Group | |
7 | ![]() |
AFVC - PLNTY | Task List Type | |
8 | ![]() |
AFVC - STDKN | Node of operation within reference operation set | |
9 | ![]() |
AFVC - VORNR | Operation/Activity Number | |
10 | ![]() |
AFVC - VPLNR | Group of the referenced task list | |
11 | ![]() |
AFVC - VPLTY | Type of the referenced task list | |
12 | ![]() |
AFVGI - ARBID | Object ID of the resource | |
13 | ![]() |
AFVGI - PLNAL | Group Counter | |
14 | ![]() |
AFVGI - PLNKN | Number of the task list node | |
15 | ![]() |
AFVGI - PLNNR | Key for Task List Group | |
16 | ![]() |
AFVGI - PLNTY | Task List Type | |
17 | ![]() |
AFVGI - STDKN | Node of operation within reference operation set | |
18 | ![]() |
AFVGI - VORNR | Operation/Activity Number | |
19 | ![]() |
AFVGI - VPLNR | Group of the referenced task list | |
20 | ![]() |
AFVGI - VPLTY | Type of the referenced task list | |
21 | ![]() |
CRHD - ARBPL | Work center | |
22 | ![]() |
CRHD - OBJID | Object ID of the resource | |
23 | ![]() |
CRHD - OBJTY | Object types of the CIM resource | |
24 | ![]() |
CRHD - WERKS | Plant | |
25 | ![]() |
MCCONTROL - MODUS | Mode of info structure updating in LIS | |
26 | ![]() |
MCQALSB_BW - AUFPL | Routing number of operations in the order | |
27 | ![]() |
MCQALSB_BW - ERSTELDAT | Date on Which the Data Record Was Created | |
28 | ![]() |
MCQALSB_BW - ERSTELZEIT | Time of Lot Creation | |
29 | ![]() |
MCQALSB_BW - LMENGEIST | Actual Lot Quantity | |
30 | ![]() |
MCQALSB_BW - OBJNR | Object number | |
31 | ![]() |
MCQALSB_BW - PRUEFLOS | Inspection Lot Number | |
32 | ![]() |
MCQALSB_BW - QTYQALS_SKIP | Skip quantity | |
33 | ![]() |
MCQALSB_BW - ROCANCEL | Indicator: Cancel Data Record | |
34 | ![]() |
MCQALSB_BW - STAT02 | Partial Lots Exist | |
35 | ![]() |
MCQALSB_BW - STAT07 | Inspection with Inspection Points | |
36 | ![]() |
MCQALSB_BW - STAT35 | Usage Decision Has Been Made | |
37 | ![]() |
MCQALSB_BW - WERK | Plant | |
38 | ![]() |
MCQALSB_BW - ZHLQALS | Number of inspection lots | |
39 | ![]() |
MCQALSB_BW - ZHLQALS_SKIP | Number of lots with skip | |
40 | ![]() |
MCQALSX - AUFPL | Routing number of operations in the order | |
41 | ![]() |
MCQALSX - ERSTELDAT | Date on Which the Data Record Was Created | |
42 | ![]() |
MCQALSX - ERSTELZEIT | Time of Lot Creation | |
43 | ![]() |
MCQALSX - LMENGEIST | Actual Lot Quantity | |
44 | ![]() |
MCQALSX - OBJNR | Object number | |
45 | ![]() |
MCQALSX - PRUEFLOS | Inspection Lot Number | |
46 | ![]() |
MCQALSX - QTYQALS_SKIP | Skip quantity | |
47 | ![]() |
MCQALSX - STAT02 | Partial Lots Exist | |
48 | ![]() |
MCQALSX - STAT07 | Inspection with Inspection Points | |
49 | ![]() |
MCQALSX - STAT35 | Usage Decision Has Been Made | |
50 | ![]() |
MCQALSX - WERK | Plant | |
51 | ![]() |
MCQALSX - ZHLQALS | Number of inspection lots | |
52 | ![]() |
MCQALSX - ZHLQALS_SKIP | Number of lots with skip | |
53 | ![]() |
MCQALS_CHAR - AUFPL | Routing number of operations in the order | |
54 | ![]() |
MCQALS_CHAR - OBJNR | Object number | |
55 | ![]() |
MCQALS_CHAR - PRUEFLOS | Inspection Lot Number | |
56 | ![]() |
MCQALS_CHAR - WERK | Plant | |
57 | ![]() |
MCQALS_CHAR_MAT - WERK | Plant | |
58 | ![]() |
MCQALS_CTRL - STAT02 | Partial Lots Exist | |
59 | ![]() |
MCQALS_CTRL - STAT07 | Inspection with Inspection Points | |
60 | ![]() |
MCQALS_CTRL - STAT35 | Usage Decision Has Been Made | |
61 | ![]() |
MCQALS_KFG - LMENGEIST | Actual Lot Quantity | |
62 | ![]() |
MCQALS_KFG - QTYQALS_SKIP | Skip quantity | |
63 | ![]() |
MCQALS_KFG - ZHLQALS | Number of inspection lots | |
64 | ![]() |
MCQALS_KFG - ZHLQALS_SKIP | Number of lots with skip | |
65 | ![]() |
MCQALS_SYSTEM - ERSTELDAT | Date on Which the Data Record Was Created | |
66 | ![]() |
MCQALS_SYSTEM - ERSTELZEIT | Time of Lot Creation | |
67 | ![]() |
MCQALTB_BW - PRUEFLOS | Inspection Lot Number | |
68 | ![]() |
MCQALTB_BW - ROCANCEL | Indicator: Cancel Data Record | |
69 | ![]() |
MCQALTB_BW - TEILLOS | Partial lot number | |
70 | ![]() |
MCQALTX - PRUEFLOS | Inspection Lot Number | |
71 | ![]() |
MCQALTX - TEILLOS | Partial lot number | |
72 | ![]() |
MCQALT_CHAR - PRUEFLOS | Inspection Lot Number | |
73 | ![]() |
MCQALT_CHAR - TEILLOS | Partial lot number | |
74 | ![]() |
MCQAPOB_BW - AUFPL | Routing number of operations in the order | |
75 | ![]() |
MCQAPOB_BW - PLNNR | Key for Task List Group | |
76 | ![]() |
MCQAPOB_BW - PLNTY | Task List Type | |
77 | ![]() |
MCQAPOB_BW - PPLNKN | Number of the task list node | |
78 | ![]() |
MCQAPOB_BW - PRUEFLOS | Inspection Lot Number | |
79 | ![]() |
MCQAPOB_BW - ROCANCEL | Indicator: Cancel Data Record | |
80 | ![]() |
MCQAPOB_BW - VORGLFNR | Current Node Number from Order Counter APLZL | |
81 | ![]() |
MCQAPOB_BW - VPLNKN | Node of operation within reference operation set | |
82 | ![]() |
MCQAPOB_BW - VPLNR | Group of the referenced task list | |
83 | ![]() |
MCQAPOB_BW - VPLTY | Type of the referenced task list | |
84 | ![]() |
MCQAPOX - ARBID | Object ID | |
85 | ![]() |
MCQAPOX - AUFPL | Routing number of operations in the order | |
86 | ![]() |
MCQAPOX - OBJTY | Object types of the CIM resource | |
87 | ![]() |
MCQAPOX - PLNAL | Group Counter | |
88 | ![]() |
MCQAPOX - PLNNR | Key for Task List Group | |
89 | ![]() |
MCQAPOX - PLNTY | Task List Type | |
90 | ![]() |
MCQAPOX - PPLNKN | Number of the task list node | |
91 | ![]() |
MCQAPOX - PRPLATZ | Work Center | |
92 | ![]() |
MCQAPOX - PRPLATZWRK | Plant/Work Center | |
93 | ![]() |
MCQAPOX - PRUEFLOS | Inspection Lot Number | |
94 | ![]() |
MCQAPOX - VORGLFNR | Current Node Number from Order Counter APLZL | |
95 | ![]() |
MCQAPOX - VORNR | QMIS Operation Number | |
96 | ![]() |
MCQAPOX - VPLNKN | Node of operation within reference operation set | |
97 | ![]() |
MCQAPOX - VPLNR | Group of the referenced task list | |
98 | ![]() |
MCQAPOX - VPLTY | Type of the referenced task list | |
99 | ![]() |
MCQAPO_CH - ARBID | Object ID | |
100 | ![]() |
MCQAPO_CH - AUFPL | Routing number of operations in the order | |
101 | ![]() |
MCQAPO_CH - OBJTY | Object types of the CIM resource | |
102 | ![]() |
MCQAPO_CH - PLNAL | Group Counter | |
103 | ![]() |
MCQAPO_CH - PLNNR | Key for Task List Group | |
104 | ![]() |
MCQAPO_CH - PLNTY | Task List Type | |
105 | ![]() |
MCQAPO_CH - PPLNKN | Number of the task list node | |
106 | ![]() |
MCQAPO_CH - PRPLATZ | Work Center | |
107 | ![]() |
MCQAPO_CH - PRPLATZWRK | Plant/Work Center | |
108 | ![]() |
MCQAPO_CH - PRUEFLOS | Inspection Lot Number | |
109 | ![]() |
MCQAPO_CH - VORGLFNR | Current Node Number from Order Counter APLZL | |
110 | ![]() |
MCQAPO_CH - VORNR | QMIS Operation Number | |
111 | ![]() |
MCQAPO_CH - VPLNKN | Node of operation within reference operation set | |
112 | ![]() |
MCQAPO_CH - VPLNR | Group of the referenced task list | |
113 | ![]() |
MCQAPO_CH - VPLTY | Type of the referenced task list | |
114 | ![]() |
MCQAPPB_BW - PROBENRPP | Sample Number (Based on an Inspection Point) | |
115 | ![]() |
MCQAPPB_BW - PRUEFLOS | Inspection Lot Number | |
116 | ![]() |
MCQAPPB_BW - ROCANCEL | Indicator: Cancel Data Record | |
117 | ![]() |
MCQAPPB_BW - TEILLOS | Partial lot number | |
118 | ![]() |
MCQAPPB_BW - VORGLFNR | Current Node Number from Order Counter APLZL | |
119 | ![]() |
MCQAPPX - PROBENRPP | Sample Number (Based on an Inspection Point) | |
120 | ![]() |
MCQAPPX - PRUEFLOS | Inspection Lot Number | |
121 | ![]() |
MCQAPPX - TEILLOS | Partial lot number | |
122 | ![]() |
MCQAPPX - VORGLFNR | Current Node Number from Order Counter APLZL | |
123 | ![]() |
MCQAPP_CHAR - PROBENRPP | Sample Number (Based on an Inspection Point) | |
124 | ![]() |
MCQAPP_CHAR - PRUEFLOS | Inspection Lot Number | |
125 | ![]() |
MCQAPP_CHAR - TEILLOS | Partial lot number | |
126 | ![]() |
MCQAPP_CHAR - VORGLFNR | Current Node Number from Order Counter APLZL | |
127 | ![]() |
MCQAQRB_BW - BWGRENZEOB1NI | Additional first upper limit value exists | |
128 | ![]() |
MCQAQRB_BW - BWGRENZEOB2NI | Additional 2nd upper limit exists | |
129 | ![]() |
MCQAQRB_BW - BWGRENZEUN1NI | Additional 1st lower limit exists | |
130 | ![]() |
MCQAQRB_BW - BWGRENZEUN2NI | Additional 2nd lower limit exists | |
131 | ![]() |
MCQAQRB_BW - BWSOLLWNI | Target value exists | |
132 | ![]() |
MCQAQRB_BW - BWTOLOBNI | Upper Tolerance Limit Exists | |
133 | ![]() |
MCQAQRB_BW - BWTOLUNNI | Lower Tolerance Limit Exists | |
134 | ![]() |
MCQAQRB_BW - MERKNR | Inspection Characteristic Number | |
135 | ![]() |
MCQAQRB_BW - PROBENR | Number of the Partial Sample | |
136 | ![]() |
MCQAQRB_BW - PRUEFLOS | Inspection Lot Number | |
137 | ![]() |
MCQAQRB_BW - ROCANCEL | Indicator: Cancel Data Record | |
138 | ![]() |
MCQAQRB_BW - SUMEW | Total of Valid Single Values | |
139 | ![]() |
MCQAQRB_BW - SUMMW | Total of Mean Values | |
140 | ![]() |
MCQAQRB_BW - SUMSIGMAST | Total of Sample Dispersions | |
141 | ![]() |
MCQAQRB_BW - SUMVAR | Total of Sample Variances | |
142 | ![]() |
MCQAQRB_BW - SUMVARIN | Total of Single Value Variances | |
143 | ![]() |
MCQAQRB_BW - TOLOB | Upper Specification Limit | |
144 | ![]() |
MCQAQRB_BW - TOLUN | Lower Tolerance Limit | |
145 | ![]() |
MCQAQRB_BW - TOL_NKST | Number of Places to the Right of a Decimal Point (Accuracy) | |
146 | ![]() |
MCQAQRB_BW - TSTICHPRKZ | Partial Samples Possible | |
147 | ![]() |
MCQAQRB_BW - VORGLFNR | Current Node Number from Order Counter APLZL | |
148 | ![]() |
MCQAQRB_BW - ZHLNSTAT | Number of Valid Single Values | |
149 | ![]() |
MCQAQRB_BW - ZHLNSTPF | Sample Size (No. of Valid Values in Sample) | |
150 | ![]() |
MCQAQRX - BWGRENZEOB1NI | Additional first upper limit value exists | |
151 | ![]() |
MCQAQRX - BWGRENZEOB2NI | Additional 2nd upper limit exists | |
152 | ![]() |
MCQAQRX - BWGRENZEUN1NI | Additional 1st lower limit exists | |
153 | ![]() |
MCQAQRX - BWGRENZEUN2NI | Additional 2nd lower limit exists | |
154 | ![]() |
MCQAQRX - BWSOLLWNI | Target value exists | |
155 | ![]() |
MCQAQRX - BWTOLOBNI | Upper Tolerance Limit Exists | |
156 | ![]() |
MCQAQRX - BWTOLUNNI | Lower Tolerance Limit Exists | |
157 | ![]() |
MCQAQRX - MERKNR | Inspection Characteristic Number | |
158 | ![]() |
MCQAQRX - PROBENR | Number of the Partial Sample | |
159 | ![]() |
MCQAQRX - PRUEFLOS | Inspection Lot Number | |
160 | ![]() |
MCQAQRX - SUMEW | Total of Valid Single Values | |
161 | ![]() |
MCQAQRX - SUMMW | Total of Mean Values | |
162 | ![]() |
MCQAQRX - SUMSIGMAST | Total of Sample Dispersions | |
163 | ![]() |
MCQAQRX - SUMVAR | Total of Sample Variances | |
164 | ![]() |
MCQAQRX - SUMVARIN | Total of Single Value Variances | |
165 | ![]() |
MCQAQRX - TOLOB | Upper Specification Limit | |
166 | ![]() |
MCQAQRX - TOLUN | Lower Tolerance Limit | |
167 | ![]() |
MCQAQRX - TOL_NKST | Number of Places to the Right of a Decimal Point (Accuracy) | |
168 | ![]() |
MCQAQRX - TSTICHPRKZ | Partial Samples Possible | |
169 | ![]() |
MCQAQRX - VORGLFNR | Current Node Number from Order Counter APLZL | |
170 | ![]() |
MCQAQRX - ZHLNSTAT | Number of Valid Single Values | |
171 | ![]() |
MCQAQRX - ZHLNSTPF | Sample Size (No. of Valid Values in Sample) | |
172 | ![]() |
MCQAQR_CHAR - MERKNR | Inspection Characteristic Number | |
173 | ![]() |
MCQAQR_CHAR - PROBENR | Number of the Partial Sample | |
174 | ![]() |
MCQAQR_CHAR - PRUEFLOS | Inspection Lot Number | |
175 | ![]() |
MCQAQR_CHAR - VORGLFNR | Current Node Number from Order Counter APLZL | |
176 | ![]() |
MCQAQR_KYF - BWGRENZEOB1NI | Additional first upper limit value exists | |
177 | ![]() |
MCQAQR_KYF - BWGRENZEOB2NI | Additional 2nd upper limit exists | |
178 | ![]() |
MCQAQR_KYF - BWGRENZEUN1NI | Additional 1st lower limit exists | |
179 | ![]() |
MCQAQR_KYF - BWGRENZEUN2NI | Additional 2nd lower limit exists | |
180 | ![]() |
MCQAQR_KYF - BWSOLLWNI | Target value exists | |
181 | ![]() |
MCQAQR_KYF - BWTOLOBNI | Upper Tolerance Limit Exists | |
182 | ![]() |
MCQAQR_KYF - BWTOLUNNI | Lower Tolerance Limit Exists | |
183 | ![]() |
MCQAQR_KYF - SUMEW | Total of Valid Single Values | |
184 | ![]() |
MCQAQR_KYF - SUMMW | Total of Mean Values | |
185 | ![]() |
MCQAQR_KYF - SUMSIGMAST | Total of Sample Dispersions | |
186 | ![]() |
MCQAQR_KYF - SUMVAR | Total of Sample Variances | |
187 | ![]() |
MCQAQR_KYF - SUMVARIN | Total of Single Value Variances | |
188 | ![]() |
MCQAQR_KYF - TOLOB | Upper Specification Limit | |
189 | ![]() |
MCQAQR_KYF - TOLUN | Lower Tolerance Limit | |
190 | ![]() |
MCQAQR_KYF - TOL_NKST | Number of Places to the Right of a Decimal Point (Accuracy) | |
191 | ![]() |
MCQAQR_KYF - TSTICHPRKZ | Partial Samples Possible | |
192 | ![]() |
MCQAQR_KYF - ZHLNSTAT | Number of Valid Single Values | |
193 | ![]() |
MCQAQR_KYF - ZHLNSTPF | Sample Size (No. of Valid Values in Sample) | |
194 | ![]() |
MCQAVEB_BW - DURATION_EXT | Lead time in calendar days | |
195 | ![]() |
MCQAVEB_BW - DURATION_INT | Lead time in working days | |
196 | ![]() |
MCQAVEB_BW - EINHTAG | Lead Time Unit (Day) | |
197 | ![]() |
MCQAVEB_BW - PRUEFLOS | Inspection Lot Number | |
198 | ![]() |
MCQAVEB_BW - QTYQAVE_ACC | Cumulated quantity of accepted inspection lots | |
199 | ![]() |
MCQAVEB_BW - QTYQAVE_REJ | Cumulated quantity of rejected inspection lots | |
200 | ![]() |
MCQAVEB_BW - ROCANCEL | Indicator: Cancel Data Record | |
201 | ![]() |
MCQAVEB_BW - VBEWERTUNG | Code Valuation | |
202 | ![]() |
MCQAVEB_BW - VDATUM | Date of Code Used for Usage Decision | |
203 | ![]() |
MCQAVEB_BW - VEZEITERF | Time when Usage Decision Was Recorded | |
204 | ![]() |
MCQAVEB_BW - ZHLQAVE_ACC | Number of accepted inspection lots (including skips) | |
205 | ![]() |
MCQAVEB_BW - ZHLQAVE_REJ | Number of rejected inspection lots | |
206 | ![]() |
MCQAVEX - DURATION_EXT | Lead time in calendar days | |
207 | ![]() |
MCQAVEX - DURATION_INT | Lead time in working days | |
208 | ![]() |
MCQAVEX - EINHTAG | Lead Time Unit (Day) | |
209 | ![]() |
MCQAVEX - PRUEFLOS | Inspection Lot Number | |
210 | ![]() |
MCQAVEX - QTYQAVE_ACC | Cumulated quantity of accepted inspection lots | |
211 | ![]() |
MCQAVEX - QTYQAVE_REJ | Cumulated quantity of rejected inspection lots | |
212 | ![]() |
MCQAVEX - VBEWERTUNG | Code Valuation | |
213 | ![]() |
MCQAVEX - VDATUM | Date of Code Used for Usage Decision | |
214 | ![]() |
MCQAVEX - VEZEITERF | Time when Usage Decision Was Recorded | |
215 | ![]() |
MCQAVEX - ZHLQAVE_ACC | Number of accepted inspection lots (including skips) | |
216 | ![]() |
MCQAVEX - ZHLQAVE_REJ | Number of rejected inspection lots | |
217 | ![]() |
MCQAVEX_KFG - DURATION_EXT | Lead time in calendar days | |
218 | ![]() |
MCQAVEX_KFG - DURATION_INT | Lead time in working days | |
219 | ![]() |
MCQAVEX_KFG - EINHTAG | Lead Time Unit (Day) | |
220 | ![]() |
MCQAVEX_KFG - QTYQAVE_ACC | Cumulated quantity of accepted inspection lots | |
221 | ![]() |
MCQAVEX_KFG - QTYQAVE_REJ | Cumulated quantity of rejected inspection lots | |
222 | ![]() |
MCQAVEX_KFG - ZHLQAVE_ACC | Number of accepted inspection lots (including skips) | |
223 | ![]() |
MCQAVEX_KFG - ZHLQAVE_REJ | Number of rejected inspection lots | |
224 | ![]() |
MCQ_EVENT - EVENT | Event for which updating should take place | |
225 | ![]() |
QALS - AUFPL | Routing number of operations in the order | |
226 | ![]() |
QALS - KZSKIPLOT | Lot Skipped | |
227 | ![]() |
QALS - LMENGEIST | Actual Lot Quantity | |
228 | ![]() |
QALS - OBJNR | Object number | |
229 | ![]() |
QALS - PRUEFLOS | Inspection Lot Number | |
230 | ![]() |
QALS - STAT02 | Partial Lots Exist | |
231 | ![]() |
QALS - STAT07 | Inspection with Inspection Points | |
232 | ![]() |
QALS - STAT35 | Usage Decision Has Been Made | |
233 | ![]() |
QALT - PRUEFLOS | Inspection Lot Number | |
234 | ![]() |
QALT - TEILLOS | Partial lot number | |
235 | ![]() |
QAMKR - ANZWERTG | Number of Inspected Sample Units | |
236 | ![]() |
QAMKR - ATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
237 | ![]() |
QAMKR - GRENZOB1NI | Value Not Initial if Set | |
238 | ![]() |
QAMKR - GRENZOB2NI | Value Not Initial if Set | |
239 | ![]() |
QAMKR - GRENZUN1NI | Value Not Initial if Set | |
240 | ![]() |
QAMKR - GRENZUN2NI | Value Not Initial if Set | |
241 | ![]() |
QAMKR - ISTSTPUMF | Number of Recorded Sample Units | |
242 | ![]() |
QAMKR - MITTELWERT | Arithmetic Mean of Valid Measured Values | |
243 | ![]() |
QAMKR - SOLLWNI | Value Not Initial if Set | |
244 | ![]() |
QAMKR - STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | |
245 | ![]() |
QAMKR - TOLERANZOB | Upper Specification Limit | |
246 | ![]() |
QAMKR - TOLERANZUN | Lower Tolerance Limit | |
247 | ![]() |
QAMKR - TOLOBNI | Value Not Initial if Set | |
248 | ![]() |
QAMKR - TOLUNNI | Value Not Initial if Set | |
249 | ![]() |
QAMKR - VARIANZ | Dispersion (Variance) of Valid Measured Values | |
250 | ![]() |
QAMR - ISTSTPUMF | Number of Recorded Sample Units | |
251 | ![]() |
QAMR - MERKNR | Inspection Characteristic Number | |
252 | ![]() |
QAMR - MITTELWERT | Arithmetic Mean of Valid Measured Values | |
253 | ![]() |
QAMR - PRUEFLOS | Inspection Lot Number | |
254 | ![]() |
QAMR - SATZSTATUS | Results Record Status | |
255 | ![]() |
QAMR - VARIANZ | Dispersion (Variance) of Valid Measured Values | |
256 | ![]() |
QAMR - VORGLFNR | Current Node Number from Order Counter APLZL | |
257 | ![]() |
QAMV - KZRAST | Indicator: Sampling Procedure for Inspection Points | |
258 | ![]() |
QAMV - MERKNR | Inspection Characteristic Number | |
259 | ![]() |
QAMV - PRUEFLOS | Inspection Lot Number | |
260 | ![]() |
QAMV - TSTICHPRKZ | Partial Samples Possible | |
261 | ![]() |
QAMV - VORGLFNR | Current Node Number from Order Counter APLZL | |
262 | ![]() |
QAPO - AUFPL | Routing number of operations in the order | |
263 | ![]() |
QAPO - PRUEFLOS | Inspection Lot Number | |
264 | ![]() |
QAPO - VORGLFNR | Current Node Number from Order Counter APLZL | |
265 | ![]() |
QAPP - PROBENR | Sample Number (Based on an Inspection Point) | |
266 | ![]() |
QAPP - PRUEFLOS | Inspection Lot Number | |
267 | ![]() |
QAPP - TEILLOS | Partial lot number | |
268 | ![]() |
QAPP - VORGLFNR | Current Node Number from Order Counter APLZL | |
269 | ![]() |
QASPR - ANZWERTG | Number of Inspected Sample Units | |
270 | ![]() |
QASPR - ATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | |
271 | ![]() |
QASPR - ISTSTPUMF | Number of Recorded Sample Units | |
272 | ![]() |
QASPR - MITTELWERT | Arithmetic Mean of Valid Measured Values | |
273 | ![]() |
QASPR - VARIANZ | Dispersion (Variance) of Valid Measured Values | |
274 | ![]() |
QASR - MERKNR | Inspection Characteristic Number | |
275 | ![]() |
QASR - PROBENR | Number of the Partial Sample | |
276 | ![]() |
QASR - PRUEFLOS | Inspection Lot Number | |
277 | ![]() |
QASR - SATZSTATUS | Results Record Status | |
278 | ![]() |
QASR - VORGLFNR | Current Node Number from Order Counter APLZL | |
279 | ![]() |
QASV - MERKNR | Inspection Characteristic Number | |
280 | ![]() |
QASV - PROBENR | Sample Number | |
281 | ![]() |
QASV - PRUEFLOS | Inspection Lot Number | |
282 | ![]() |
QASV - VORGLFNR | Current Node Number from Order Counter APLZL | |
283 | ![]() |
QAVE - KZART | Inspection Lot, Partial Lot, Single Unit, Interval | |
284 | ![]() |
QAVE - PRUEFLOS | Inspection Lot Number | |
285 | ![]() |
QAVE - VBEWERTUNG | Code Valuation | |
286 | ![]() |
QAVE - VDATUM | Date of Code Used for Usage Decision | |
287 | ![]() |
QAVE - VEZEITERF | Time when Usage Decision Was Recorded | |
288 | ![]() |
SYST - TABIX | ABAP System Field: Row Index of Internal Tables | |
289 | ![]() |
TMC5 - ZEITP | Event for which updating should take place | |
290 | ![]() |
TQ75 - FBSNAME | Name of Function Module |