Table/Structure Field list used by SAP ABAP Program LEPU1F01 (Include LEPU1F01)
SAP ABAP Program
LEPU1F01 (Include LEPU1F01) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
![]() |
![]() |
|||
1 | ![]() |
DBERCHZ - N_ABRMENGE | Places after decimal point in billing quantity | |
2 | ![]() |
DBERCHZ - V_ABRMENGE | Places before decimal point in billing quantity | |
3 | ![]() |
DD07V - DDTEXT | Short Text for Fixed Values | |
4 | ![]() |
DD07V - DOMVALUE_L | Values for Domains: Single Value / Upper Limit | |
5 | ![]() |
EABL - ABLBELNR | Internal ID for meter reading document | |
6 | ![]() |
EABL - ABLESART | Scheduled meter reading category | |
7 | ![]() |
EABL - ABLESER | Meter reader number | |
8 | ![]() |
EABL - ABLESTYP | Meter reading category | |
9 | ![]() |
EABL - ABLHINW | Note from meter reader | |
10 | ![]() |
EABL - ABLSTAT | Meter Reading Status | |
11 | ![]() |
EABL - ADAT | Meter reading date relevant to billing | |
12 | ![]() |
EABL - ADATREAL | [JBP] Real Meter Reading Date | |
13 | ![]() |
EABL - ADATSOLL | Scheduled meter reading date | |
14 | ![]() |
EABL - AKTIV | Meter reading active | |
15 | ![]() |
EABL - ARBAUF | Control Meter Reading Order ID Printed | |
16 | ![]() |
EABL - ATIM | Meter reading time (relevant to billing) | |
17 | ![]() |
EABL - ATIMREAL | [JBP] Real Meter Reading Time | |
18 | ![]() |
EABL - BP | Selection of Billing Period: Standard or JBP | |
19 | ![]() |
EABL - EQUNR | Equipment Number | |
20 | ![]() |
EABL - GERNR | Device | |
21 | ![]() |
EABL - ISTABLART | Meter reading type | |
22 | ![]() |
EABL - MASSBILL | Unit of measurement for billing | |
23 | ![]() |
EABL - MASSREAD | Unit of measurement for meter reading | |
24 | ![]() |
EABL - N_ZWSTAND | Places After Decimal Point in the Meter Reading | |
25 | ![]() |
EABL - N_ZWSTNDAB | Decimal Places in the Billed Meter Reading | |
26 | ![]() |
EABL - POPCODE | Dependent validation | |
27 | ![]() |
EABL - PRUEFPKT | Independent validation | |
28 | ![]() |
EABL - STANZNAC | Number of decimal places for register | |
29 | ![]() |
EABL - STANZVOR | Number of predecimal places for register | |
30 | ![]() |
EABL - STEUERGRP | Control group for multiple meter reading order creation | |
31 | ![]() |
EABL - V_ZWSTAND | Places Before Decimal Point in Meter Reading | |
32 | ![]() |
EABL - V_ZWSTNDAB | Predecimal Places in Billed Meter Reading | |
33 | ![]() |
EABL - ZUORDDAT | Meter reading allocation date | |
34 | ![]() |
EABL - ZWNUMMER | Register | |
35 | ![]() |
EABLG - ABLBELNR | Internal ID for meter reading document | |
36 | ![]() |
EABLG - ABLESGR | Meter reading reason | |
37 | ![]() |
EABLG - ANLAGE | Installation | |
38 | ![]() |
EABLH - I_VERBERW | Expected consumption: internal format | |
39 | ![]() |
EABLH - I_ZWSTERW | Expected meter reading: internal format | |
40 | ![]() |
EABL_JBP - ADATREAL | [JBP] Real Meter Reading Date | |
41 | ![]() |
EABL_JBP - ATIMREAL | [JBP] Real Meter Reading Time | |
42 | ![]() |
EABL_JBP - BP | Selection of Billing Period: Standard or JBP | |
43 | ![]() |
EADZ - AB | Date from which time slice is valid | |
44 | ![]() |
EADZ - BIS | Date at Which a Time Slice Expires | |
45 | ![]() |
EADZ - LOGIKZW | Logical register number | |
46 | ![]() |
EANL - ANLAGE | Installation | |
47 | ![]() |
EANLKEY - ANLAGE | Installation | |
48 | ![]() |
EASTE - LOGIKZW | Logical register number | |
49 | ![]() |
EASTI - AB | Date from which time slice is valid | |
50 | ![]() |
EASTI - BIS | Date at Which a Time Slice Expires | |
51 | ![]() |
EASTI - INDEXNR | Consecutive number of register relationship | |
52 | ![]() |
EASTI - LOGIKZW | Logical register number | |
53 | ![]() |
EASTI - OPCODE | Operation code: Role of register in relationship | |
54 | ![]() |
EASTI - ZWZUART | Register relationship type | |
55 | ![]() |
EASTIH - INDEXNR | Consecutive number of register relationship | |
56 | ![]() |
EASTS - AB | Date from which time slice is valid | |
57 | ![]() |
EASTS - ANLAGE | Installation | |
58 | ![]() |
EASTS - BIS | Date at Which a Time Slice Expires | |
59 | ![]() |
EASTS - LOGIKZW | Logical register number | |
60 | ![]() |
EASTS - TARIFART | Rate Type | |
61 | ![]() |
ECAMIOPRCI - XMOVEIN | Indicator: Create Move-In | |
62 | ![]() |
ECAMIOPRCI - XMOVEOUTPRED | End Previous Contract with Move-Out | |
63 | ![]() |
EDEPVALD - COMPT_BILLREG | Total Consumption of Clearing Registers | |
64 | ![]() |
EDEPVALD - COMPT_CONTRREG | Consumption of control register | |
65 | ![]() |
EDEPVALD - COMPT_PRIMREG | Consumption of primary register | |
66 | ![]() |
EDEPVALD - COMPT_SECREG | Secondary register consumption | |
67 | ![]() |
EDEPVALD - COSINEPHI | Cosine phi | |
68 | ![]() |
EDEPVALD - COSPHI_EXP | Expected cosine phi | |
69 | ![]() |
EDEPVALD - DIM_DEVIATION | Dimension of actual deviation | |
70 | ![]() |
EDEPVALD - DIM_PERMIS_DEV | Dimension of permitted deviation | |
71 | ![]() |
EDEPVALD - DV_DEVIATION | Actual deviation | |
72 | ![]() |
EDEPVALD - INDEXNR | Consecutive number of register relationship | |
73 | ![]() |
EDEPVALD - MAX_COSPHI | Upper limit for cosine phi | |
74 | ![]() |
EDEPVALD - MAX_CPT_BILREG | Maximum Total Consumption of Clearing Registers | |
75 | ![]() |
EDEPVALD - MAX_CPT_SECREG | Permissible maximum consumption of secondary meter | |
76 | ![]() |
EDEPVALD - MIN_COSPHI | Permissible lower limit of cosine phi | |
77 | ![]() |
EDEPVALD - MIN_CPT_BILREG | Permissible Minimum for Total Consumption of Clearing Regs | |
78 | ![]() |
EDEPVALD - MIN_CPT_SECREG | Minimum consumption of secondary meter | |
79 | ![]() |
EDEPVALD - PERMIS_DEVIATION | Permissible deviation from guide value | |
80 | ![]() |
EDEPVALD - REGRATIO | Consumption ratio of registers | |
81 | ![]() |
EDEPVALD - REGRATIO_EXP | Consumption ratio of registers of previous period | |
82 | ![]() |
EDEPVALD - REGRATIO_PERMIS | Permissible consumption ratio | |
83 | ![]() |
EDEPVALOBJ - DEVIATION | Actual deviation | |
84 | ![]() |
EDEPVALOBJ - DIM_DEVIATION | Dimension of actual deviation | |
85 | ![]() |
EDEPVALOBJ - INDEXNR | Consecutive number of register relationship | |
86 | ![]() |
EDEPVALOBJ - MAXIMUM | Meter reading recorded | |
87 | ![]() |
EDEPVALOBJ - MINIMUM | Meter reading recorded | |
88 | ![]() |
EDEPVALOBJ - MSGID | Message Class | |
89 | ![]() |
EDEPVALOBJ - MSGNO | Message Number | |
90 | ![]() |
EDEPVALOBJ - MSGTY | Message Type | |
91 | ![]() |
EDEPVALOBJ - MSGV1 | Message Variable | |
92 | ![]() |
EDEPVALOBJ - MSGV2 | Message Variable | |
93 | ![]() |
EDEPVALOBJ - MSGV3 | Message Variable | |
94 | ![]() |
EDEPVALOBJ - MSGV4 | Message Variable | |
95 | ![]() |
EDEPVALOBJ - PERMIS_DEVIATION | Permissible deviation from guide value | |
96 | ![]() |
EDEPVALOBJ - POPCODE | Dependent validation | |
97 | ![]() |
EDEPVALOBJ - VALUE1 | Meter reading recorded | |
98 | ![]() |
EDEPVALOBJ - VALUE2 | Meter reading recorded | |
99 | ![]() |
EJBP - BP | Selection of Billing Period: Standard or JBP | |
100 | ![]() |
EKDI - OPERAND | Operand | |
101 | ![]() |
EKDI - WERT1 | Entry value (installed value) for a device | |
102 | ![]() |
EMSG - MSGV1 | Message variable 01 | |
103 | ![]() |
EMSG_GEN - MSGID | Message Class | |
104 | ![]() |
EMSG_GEN - MSGNO | Message Number | |
105 | ![]() |
EMSG_GEN - MSGTY | Message type | |
106 | ![]() |
EMSG_GEN - OKCODE | OK code for message object | |
107 | ![]() |
EMSG_MSG - KZ_BREAK | Indicator: Breakpoint | |
108 | ![]() |
EMSG_MSG - KZ_EXC | Indicator: Output EXCEPTION | |
109 | ![]() |
EMSG_MSG - KZ_MSG | Indicator: Output message | |
110 | ![]() |
EMSG_MSG - MSGID | Message Class | |
111 | ![]() |
EMSG_MSG - MSGNO | Message Number | |
112 | ![]() |
EMSG_MSG - MSGTY | Message Type | |
113 | ![]() |
EMSG_MSG - MSGV1 | Message Variable | |
114 | ![]() |
EMSG_MSG - MSGV2 | Message Variable | |
115 | ![]() |
EMSG_MSG - MSGV3 | Message Variable | |
116 | ![]() |
EMSG_MSG - MSGV4 | Message Variable | |
117 | ![]() |
ERCHZ_D - N_ABRMENGE | Places after decimal point in billing quantity | |
118 | ![]() |
ERCHZ_D - V_ABRMENGE | Places before decimal point in billing quantity | |
119 | ![]() |
ETDZ - AB | Date from which time slice is valid | |
120 | ![]() |
ETDZ - BIS | Date at Which a Time Slice Expires | |
121 | ![]() |
ETDZ - BLIWIRK | Reactive, apparent, or active registers | |
122 | ![]() |
ETDZ - EQUNR | Equipment Number | |
123 | ![]() |
ETDZ - KENNZIFF | Code for Identifying a Register | |
124 | ![]() |
ETDZ - LOGIKZW | Logical register number | |
125 | ![]() |
ETDZ - SPARTYP | Division category | |
126 | ![]() |
ETDZ - ZWART | Register type | |
127 | ![]() |
ETDZ - ZWKENN | Register identification | |
128 | ![]() |
ETDZ - ZWNUMMER | Register | |
129 | ![]() |
ETDZ - ZWTYP | Register category | |
130 | ![]() |
ETFND - TARIFART | Rate Type | |
131 | ![]() |
ETFND - TARIFNR | Rate key | |
132 | ![]() |
ETFND - TARIFTYP | Rate category | |
133 | ![]() |
ETRF - PRUEFKL | Validation class for independent validations | |
134 | ![]() |
ETRF - TARIFNR | Rate key | |
135 | ![]() |
ETTAF - WERT1 | Entry value (installed value) for a device | |
136 | ![]() |
ETTIF - OPERAND | Operand | |
137 | ![]() |
ETTIF - WERT1 | Entry value (installed value) for a device | |
138 | ![]() |
ETTIFN - INAKTIV | Entry Inactive | |
139 | ![]() |
ETTIFN - WERT1 | Entry value (installed value) for a device | |
140 | ![]() |
EVALLIMITS - FEHLKLAS | Error class for validations | |
141 | ![]() |
EVALLIMITS - INTERV_TOL | Interval number for tolerance limits | |
142 | ![]() |
EVALLIMITS - MR_RESULT_MAX | INTERNAL: calculation format for readings and consumption | |
143 | ![]() |
EVALLIMITS - MR_RESULT_MIN | INTERNAL: calculation format for readings and consumption | |
144 | ![]() |
EVALLIMITS - PERIODNR | Number of comparison periods | |
145 | ![]() |
EVER - ANLAGE | Installation | |
146 | ![]() |
EVER - AUSZDAT | Move-Out Date | |
147 | ![]() |
EVER - EINZDAT | Move-In Date | |
148 | ![]() |
EVERU - ANLAGE | Installation | |
149 | ![]() |
EVERU - AUSZDAT | Move-Out Date | |
150 | ![]() |
EVERU - EINZDAT | Move-In Date | |
151 | ![]() |
EZUZ - LOGIKZW | Logical register number | |
152 | ![]() |
EZWG - SPARTYP | Division category for device management | |
153 | ![]() |
EZWG - ZWART | Register type | |
154 | ![]() |
EZWG - ZWKENN | Register identification | |
155 | ![]() |
EZWG - ZWTYP | Register category | |
156 | ![]() |
ISU00_OBJ_CONTR - INPERR | Indicator: input fields in this field group | |
157 | ![]() |
ISU00_OBJ_CONTR - NO_DIALOG | Suppress database update | |
158 | ![]() |
ISU00_OBJ_CONTR - SETCURDYNNR | Dynpro Number | |
159 | ![]() |
ISU00_OBJ_CONTR - SETCURFIELD | Cursor field | |
160 | ![]() |
ISU00_OBJ_CONTR - SETCURLINE | Index of Current Step Loop Line | |
161 | ![]() |
ISU17_EABL_OBJ - EQUNR | Equipment Number | |
162 | ![]() |
ISU17_EABL_OBJ - IEABL | ISU17_EABL_OBJ-IEABL | |
163 | ![]() |
ISU17_EABL_OBJ - IEABLG | ISU17_EABL_OBJ-IEABLG | |
164 | ![]() |
ISU17_EABL_OBJ - LOGIKZW | Logical register number | |
165 | ![]() |
ISU17_EABL_OBJ - ZWNUMMER | Register | |
166 | ![]() |
ISU17_INTERFACE_STRUCTURES - EABL | ISU17_INTERFACE_STRUCTURES-EABL | |
167 | ![]() |
ISU17_INTERFACE_STRUCTURES - EABLG | ISU17_INTERFACE_STRUCTURES-EABLG | |
168 | ![]() |
ISU17_INTERFACE_STRUCTURES - EABL_PROVIDED | Indicators | |
169 | ![]() |
ISU17_INTERFACE_STRUCTURES - EADZ | ISU17_INTERFACE_STRUCTURES-EADZ | |
170 | ![]() |
ISU17_INTERFACE_STRUCTURES - EADZ_PROVIDED | Indicators | |
171 | ![]() |
ISU17_INTERFACE_STRUCTURES - EANL | ISU17_INTERFACE_STRUCTURES-EANL | |
172 | ![]() |
ISU17_INTERFACE_STRUCTURES - EANL_PROVIDED | Indicators | |
173 | ![]() |
ISU17_INTERFACE_STRUCTURES - EASTE | ISU17_INTERFACE_STRUCTURES-EASTE | |
174 | ![]() |
ISU17_INTERFACE_STRUCTURES - EASTE_PROVIDED | Indicators | |
175 | ![]() |
ISU17_INTERFACE_STRUCTURES - EASTS | ISU17_INTERFACE_STRUCTURES-EASTS | |
176 | ![]() |
ISU17_INTERFACE_STRUCTURES - EASTS_PROVIDED | Indicators | |
177 | ![]() |
ISU17_INTERFACE_STRUCTURES - EGER | ISU17_INTERFACE_STRUCTURES-EGER | |
178 | ![]() |
ISU17_INTERFACE_STRUCTURES - EGER_PROVIDED | Indicators | |
179 | ![]() |
ISU17_INTERFACE_STRUCTURES - ETDZ | ISU17_INTERFACE_STRUCTURES-ETDZ | |
180 | ![]() |
ISU17_INTERFACE_STRUCTURES - ETDZ_PROVIDED | Indicators | |
181 | ![]() |
ISU17_INTERFACE_STRUCTURES - ETRF | ISU17_INTERFACE_STRUCTURES-ETRF | |
182 | ![]() |
ISU17_INTERFACE_STRUCTURES - ETRF_PROVIDED | Indicators | |
183 | ![]() |
ISU17_INTERFACE_STRUCTURES - EVER | ISU17_INTERFACE_STRUCTURES-EVER | |
184 | ![]() |
ISU17_INTERFACE_STRUCTURES - EZUZ | ISU17_INTERFACE_STRUCTURES-EZUZ | |
185 | ![]() |
ISU17_INTERFACE_STRUCTURES - EZUZ_PROVIDED | Indicators | |
186 | ![]() |
ISU17_INTERFACE_STRUCTURES - TEANL | ISU17_INTERFACE_STRUCTURES-TEANL | |
187 | ![]() |
ISU17_INTERFACE_STRUCTURES - TEANL_PROVIDED | Indicators | |
188 | ![]() |
ISU17_METERDOCU_MASTERDATA - EABL_PROVIDED | Indicators | |
189 | ![]() |
ISU17_METERDOCU_MASTERDATA - EADZ_PROVIDED | Indicators | |
190 | ![]() |
ISU17_METERDOCU_MASTERDATA - EANL_PROVIDED | Indicators | |
191 | ![]() |
ISU17_METERDOCU_MASTERDATA - EASTE_PROVIDED | Indicators | |
192 | ![]() |
ISU17_METERDOCU_MASTERDATA - EASTS_PROVIDED | Indicators | |
193 | ![]() |
ISU17_METERDOCU_MASTERDATA - EGER_PROVIDED | Indicators | |
194 | ![]() |
ISU17_METERDOCU_MASTERDATA - ETDZ_PROVIDED | Indicators | |
195 | ![]() |
ISU17_METERDOCU_MASTERDATA - ETRF_PROVIDED | Indicators | |
196 | ![]() |
ISU17_METERDOCU_MASTERDATA - EZUZ_PROVIDED | Indicators | |
197 | ![]() |
ISU17_METERDOCU_MASTERDATA - IEABL | ISU17_METERDOCU_MASTERDATA-IEABL | |
198 | ![]() |
ISU17_METERDOCU_MASTERDATA - IEADZ | ISU17_METERDOCU_MASTERDATA-IEADZ | |
199 | ![]() |
ISU17_METERDOCU_MASTERDATA - IEANL | ISU17_METERDOCU_MASTERDATA-IEANL | |
200 | ![]() |
ISU17_METERDOCU_MASTERDATA - IEASTE | ISU17_METERDOCU_MASTERDATA-IEASTE | |
201 | ![]() |
ISU17_METERDOCU_MASTERDATA - IEASTS | ISU17_METERDOCU_MASTERDATA-IEASTS | |
202 | ![]() |
ISU17_METERDOCU_MASTERDATA - IEGER | ISU17_METERDOCU_MASTERDATA-IEGER | |
203 | ![]() |
ISU17_METERDOCU_MASTERDATA - IETDZ | ISU17_METERDOCU_MASTERDATA-IETDZ | |
204 | ![]() |
ISU17_METERDOCU_MASTERDATA - IETFND | ISU17_METERDOCU_MASTERDATA-IETFND | |
205 | ![]() |
ISU17_METERDOCU_MASTERDATA - IETFND_PROVIDED | Indicators | |
206 | ![]() |
ISU17_METERDOCU_MASTERDATA - IETRF | ISU17_METERDOCU_MASTERDATA-IETRF | |
207 | ![]() |
ISU17_METERDOCU_MASTERDATA - IEVER | ISU17_METERDOCU_MASTERDATA-IEVER | |
208 | ![]() |
ISU17_METERDOCU_MASTERDATA - IEZUZ | ISU17_METERDOCU_MASTERDATA-IEZUZ | |
209 | ![]() |
ISU_OPWERT - WERT1 | Entry value (installed value) for a device | |
210 | ![]() |
MRTOLLIMITS - COMPT_MAX1 | INTERNAL: calculation format for readings and consumption | |
211 | ![]() |
MRTOLLIMITS - COMPT_MAX2 | INTERNAL: calculation format for readings and consumption | |
212 | ![]() |
MRTOLLIMITS - COMPT_MIN1 | INTERNAL: calculation format for readings and consumption | |
213 | ![]() |
MRTOLLIMITS - COMPT_MIN2 | INTERNAL: calculation format for readings and consumption | |
214 | ![]() |
MRTOLLIMITS - FEHLKLAS | Error class for validations | |
215 | ![]() |
MRTOLLIMITS - PERIOD_NR | Number of comparison periods | |
216 | ![]() |
PREVMR - PRMR_ABLR | Meter reader number | |
217 | ![]() |
PREVMR - PRMR_ADAT | Date of Previous Meter Reading for Register | |
218 | ![]() |
PREVMR - PRMR_ADATREAL | [JBP] Real Meter Reading Date | |
219 | ![]() |
PREVMR - PRMR_ART | Meter reading type | |
220 | ![]() |
PREVMR - PRMR_ATIM | Meter Reading Time of Previous Meter Reading for Register | |
221 | ![]() |
PREVMR - PRMR_ATIMREAL | [JBP] Real Meter Reading Time | |
222 | ![]() |
PREVMR - PRMR_BELNR | Internal ID for meter reading document | |
223 | ![]() |
PREVMR - PRMR_BP | Selection of Billing Period: Standard or JBP | |
224 | ![]() |
PREVMR - PRMR_GR | Meter reading reason | |
225 | ![]() |
PREVMR - PRMR_HINW | Note from meter reader | |
226 | ![]() |
PREVMR - PRMR_NAC | Number of decimal places for register | |
227 | ![]() |
PREVMR - PRMR_NZWAB | Decimal Places in the Billed Meter Reading | |
228 | ![]() |
PREVMR - PRMR_NZWST | Places After Decimal Point in the Meter Reading | |
229 | ![]() |
PREVMR - PRMR_STAT | Meter Reading Status | |
230 | ![]() |
PREVMR - PRMR_VOR | Number of predecimal places for register | |
231 | ![]() |
PREVMR - PRMR_VZWAB | Predecimal Places in Billed Meter Reading | |
232 | ![]() |
PREVMR - PRMR_VZWST | Places Before Decimal Point in Meter Reading | |
233 | ![]() |
PREVMR - PRMR_ZWST | Previous Meter Reading Result of Register | |
234 | ![]() |
PROGDATA - ABART | Meter reading category | |
235 | ![]() |
PROGDATA - COMPT | INTERNAL: calculation format for readings and consumption | |
236 | ![]() |
PROGDATA - COMPT_EXP | INTERNAL: calculation format for readings and consumption | |
237 | ![]() |
PROGDATA - COMPT_MAX | INTERNAL: calculation format for readings and consumption | |
238 | ![]() |
PROGDATA - COMPT_MIN | INTERNAL: calculation format for readings and consumption | |
239 | ![]() |
PROGDATA - DUE_DATE | End of Forecast Period | |
240 | ![]() |
PROGDATA - FROM_DATE | Meter reading date from which forecast is made | |
241 | ![]() |
PROGDATA - MR_DIFFERENCE | INTERNAL: calculation format for readings and consumption | |
242 | ![]() |
PROGDATA - MR_RESULT_EXP | INTERNAL: calculation format for readings and consumption | |
243 | ![]() |
PROGDATA - MR_RESULT_MAX | INTERNAL: calculation format for readings and consumption | |
244 | ![]() |
PROGDATA - MR_RESULT_MIN | INTERNAL: calculation format for readings and consumption | |
245 | ![]() |
PROGDATA - ORIGIN_ESTIM | Origin of estimated values | |
246 | ![]() |
PROGDATA - VALUE | INTERNAL: calculation format for readings and consumption | |
247 | ![]() |
PROGDATA - VALUE_EXP | INTERNAL: calculation format for readings and consumption | |
248 | ![]() |
PROGDATA - VALUE_MAX | INTERNAL: calculation format for readings and consumption | |
249 | ![]() |
PROGDATA - VALUE_MIN | INTERNAL: calculation format for readings and consumption | |
250 | ![]() |
REA00 - BREAK | Description of breakpoint in billing program | |
251 | ![]() |
REABLD - ABART | Meter reading category | |
252 | ![]() |
REABLD - ABLBELNR | Internal ID for meter reading document | |
253 | ![]() |
REABLD - ABLESARTST | Control of perm. number of cust. MRs and autom. estimations | |
254 | ![]() |
REABLD - ABLESGR | Meter reading reason | |
255 | ![]() |
REABLD - ABLESTYP | Meter reading category | |
256 | ![]() |
REABLD - ABLHINW | Note from meter reader | |
257 | ![]() |
REABLD - ABLSTAT | Meter Reading Status | |
258 | ![]() |
REABLD - ABRFAKT | Billing factor | |
259 | ![]() |
REABLD - ADAT | Meter reading date relevant to billing | |
260 | ![]() |
REABLD - ADATREAL | [JBP] Real Meter Reading Date | |
261 | ![]() |
REABLD - ADATSOLL | Scheduled meter reading date | |
262 | ![]() |
REABLD - ANLAGE | Installation | |
263 | ![]() |
REABLD - ARBAUF | Control Meter Reading Order ID Printed | |
264 | ![]() |
REABLD - ATIM | Meter reading time (relevant to billing) | |
265 | ![]() |
REABLD - ATIMREAL | [JBP] Real Meter Reading Time | |
266 | ![]() |
REABLD - BLIWIRK | Reactive, apparent, or active registers | |
267 | ![]() |
REABLD - BP | Selection of Billing Period: Standard or JBP | |
268 | ![]() |
REABLD - COMPT | INTERNAL: calculation format for readings and consumption | |
269 | ![]() |
REABLD - COMPT_EXP | INTERNAL: calculation format for readings and consumption | |
270 | ![]() |
REABLD - COMPT_MAX | INTERNAL: calculation format for readings and consumption | |
271 | ![]() |
REABLD - COMPT_MIN | INTERNAL: calculation format for readings and consumption | |
272 | ![]() |
REABLD - COMPT_OLD | INTERNAL: calculation format for readings and consumption | |
273 | ![]() |
REABLD - CORR_DYNNR | Dynpro Number | |
274 | ![]() |
REABLD - CORR_SUBSCR | Dynpro Number | |
275 | ![]() |
REABLD - DEV_STATE | Device status | |
276 | ![]() |
REABLD - DUE_DATE | End of Forecast Period | |
277 | ![]() |
REABLD - EQUNR | Equipment Number | |
278 | ![]() |
REABLD - FORCAS_DUE | Meter reading date from which forecast is made | |
279 | ![]() |
REABLD - FORCAS_FROM | Meter reading date from which forecast is made | |
280 | ![]() |
REABLD - FROM_DATE | Meter reading date from which forecast is made | |
281 | ![]() |
REABLD - F_FORMAL | Internal: formal register validations carried out completely | |
282 | ![]() |
REABLD - F_FORMVAL | Internal: formal validations completed | |
283 | ![]() |
REABLD - F_MULTVAL | Internal: dependent validation completed | |
284 | ![]() |
REABLD - F_SPECVAL | Internal: independent validation completed | |
285 | ![]() |
REABLD - GERNR | Device | |
286 | ![]() |
REABLD - ISTABLART | Meter reading type | |
287 | ![]() |
REABLD - KENNZIFF | Code for Identifying a Register | |
288 | ![]() |
REABLD - LOGIKZW | Logical register number | |
289 | ![]() |
REABLD - MASSBILL | Unit of measurement for billing | |
290 | ![]() |
REABLD - MASSREAD | Unit of measurement for meter reading | |
291 | ![]() |
REABLD - MLP_OVERFL | Indicators | |
292 | ![]() |
REABLD - MR_DIFFERENCE | INTERNAL: calculation format for readings and consumption | |
293 | ![]() |
REABLD - MR_RESULT_EXP | INTERNAL: calculation format for readings and consumption | |
294 | ![]() |
REABLD - MR_RESULT_MAX | INTERNAL: calculation format for readings and consumption | |
295 | ![]() |
REABLD - MR_RESULT_MIN | INTERNAL: calculation format for readings and consumption | |
296 | ![]() |
REABLD - MSGID | Message Class | |
297 | ![]() |
REABLD - MSGNO | Message Number | |
298 | ![]() |
REABLD - MSGTY | Message Type | |
299 | ![]() |
REABLD - MSGV1 | Message Variable | |
300 | ![]() |
REABLD - MSGV2 | Message Variable | |
301 | ![]() |
REABLD - MSGV3 | Message Variable | |
302 | ![]() |
REABLD - MSGV4 | Message Variable | |
303 | ![]() |
REABLD - N_ZWSTAND | Places After Decimal Point in the Meter Reading | |
304 | ![]() |
REABLD - N_ZWSTNDAB | Decimal Places in the Billed Meter Reading | |
305 | ![]() |
REABLD - OPERAND | Operand | |
306 | ![]() |
REABLD - ORIGIN_ESTIM | Origin of estimated values | |
307 | ![]() |
REABLD - POPCODE | Dependent validation | |
308 | ![]() |
REABLD - PRMR_ABLR | Meter reader number | |
309 | ![]() |
REABLD - PRMR_ADAT | Date of Previous Meter Reading for Register | |
310 | ![]() |
REABLD - PRMR_ADATREAL | [JBP] Real Meter Reading Date | |
311 | ![]() |
REABLD - PRMR_ART | Meter reading type | |
312 | ![]() |
REABLD - PRMR_ATIM | Meter Reading Time of Previous Meter Reading for Register | |
313 | ![]() |
REABLD - PRMR_ATIMREAL | [JBP] Real Meter Reading Time | |
314 | ![]() |
REABLD - PRMR_BELNR | Internal ID for meter reading document | |
315 | ![]() |
REABLD - PRMR_BP | Selection of Billing Period: Standard or JBP | |
316 | ![]() |
REABLD - PRMR_GR | Meter reading reason | |
317 | ![]() |
REABLD - PRMR_HINW | Note from meter reader | |
318 | ![]() |
REABLD - PRMR_NAC | Number of decimal places for register | |
319 | ![]() |
REABLD - PRMR_NZWAB | Decimal Places in the Billed Meter Reading | |
320 | ![]() |
REABLD - PRMR_NZWST | Places After Decimal Point in the Meter Reading | |
321 | ![]() |
REABLD - PRMR_STAT | Meter Reading Status | |
322 | ![]() |
REABLD - PRMR_VOR | Number of predecimal places for register | |
323 | ![]() |
REABLD - PRMR_VZWAB | Predecimal Places in Billed Meter Reading | |
324 | ![]() |
REABLD - PRMR_VZWST | Places Before Decimal Point in Meter Reading | |
325 | ![]() |
REABLD - PRMR_ZWST | Previous Meter Reading Result of Register | |
326 | ![]() |
REABLD - PRUEFKL | Validation class for independent validations | |
327 | ![]() |
REABLD - PRUEFPKT | Independent validation | |
328 | ![]() |
REABLD - SPARTYP | Division category | |
329 | ![]() |
REABLD - STANZNAC | Number of decimal places for register | |
330 | ![]() |
REABLD - STANZNAC_COMPT | Places after the decimal in a register | |
331 | ![]() |
REABLD - STANZVOR | Number of predecimal places for register | |
332 | ![]() |
REABLD - STEUERGRP | Control group for multiple meter reading order creation | |
333 | ![]() |
REABLD - TARIFART | Rate Type | |
334 | ![]() |
REABLD - TARIFNR | Rate key | |
335 | ![]() |
REABLD - TARIFTYP | Rate category | |
336 | ![]() |
REABLD - VALUE | INTERNAL: calculation format for readings and consumption | |
337 | ![]() |
REABLD - VALUE_EXP | INTERNAL: calculation format for readings and consumption | |
338 | ![]() |
REABLD - VALUE_MAX | INTERNAL: calculation format for readings and consumption | |
339 | ![]() |
REABLD - VALUE_MIN | INTERNAL: calculation format for readings and consumption | |
340 | ![]() |
REABLD - V_ZWSTAND | Places Before Decimal Point in Meter Reading | |
341 | ![]() |
REABLD - V_ZWSTNDAB | Predecimal Places in Billed Meter Reading | |
342 | ![]() |
REABLD - ZUORDDAT | Meter reading allocation date | |
343 | ![]() |
REABLD - ZWART | Register type | |
344 | ![]() |
REABLD - ZWKENN | Register identification | |
345 | ![]() |
REABLD - ZWNUMMER | Register | |
346 | ![]() |
REABLD - ZWSTAND | Meter reading recorded | |
347 | ![]() |
REABLD - ZWTYP | Register category | |
348 | ![]() |
REGEN - KENNZX | Indicators | |
349 | ![]() |
REGEN - MAXCOUNT | Maximum number of devices to be selected | |
350 | ![]() |
REL28D - ANLAGE | Installation | |
351 | ![]() |
REL28D - BUPA_NAME | Text Field | |
352 | ![]() |
REL28D - KUNDE | Business Partner Number | |
353 | ![]() |
REL28D - VBST_ADDR | Text Field | |
354 | ![]() |
REL28D - VSTELLE | Premise | |
355 | ![]() |
RVALDAT - ABLART | Meter reading category | |
356 | ![]() |
RVALDAT - CONSMPT_EX | Expected consumption | |
357 | ![]() |
RVALDAT - CSMPT_MAX | Maximum (permitted) expected consumption | |
358 | ![]() |
RVALDAT - CSMPT_MIN | Minimum (permitted) expected consumption | |
359 | ![]() |
RVALDAT - DEMAND_EX | Expected demand for a register | |
360 | ![]() |
RVALDAT - DEMAND_MAX | Maximum permitted demand for a register | |
361 | ![]() |
RVALDAT - DEMAND_MIN | Minimum permitted demand for a register | |
362 | ![]() |
RVALDAT - DEM_GR_MAX | Maximum demand agreed upon in contract | |
363 | ![]() |
RVALDAT - DEM_GR_MIN | Minimum demand agreed upon in contract | |
364 | ![]() |
RVALDAT - FIXED_DEV | Screen field: fixed value deviation | |
365 | ![]() |
RVALDAT - FIXED_DEV_ADMIT | Permissible fixed value deviation | |
366 | ![]() |
RVALDAT - MR_EX | Expected meter reading | |
367 | ![]() |
RVALDAT - MR_MAX | Maximum expected meter reading | |
368 | ![]() |
RVALDAT - MR_MIN | Minimum expected meter reading | |
369 | ![]() |
RVALDAT - NUMB_ADMIT | Number of permissible MRs by customer or estimations | |
370 | ![]() |
RVALDAT - NUMB_MRPRE | Number of repeated meter readings by customer or estimations | |
371 | ![]() |
RVALDAT - NUMB_RESET | Number of resettings for a register | |
372 | ![]() |
RVALDAT - ORIG_MR_DUE | End of Comparison Period | |
373 | ![]() |
RVALDAT - ORIG_MR_FROM | Start of comparison period | |
374 | ![]() |
RVALDAT - RESET_EXP | Number of permissible resettings | |
375 | ![]() |
RVALDAT - USAGE_HOUR | Usage hours | |
376 | ![]() |
RVALDAT - USHOUR_EXP | Expected usage hours | |
377 | ![]() |
RVALDAT - USHOUR_MAX | Upper limit for usage hours | |
378 | ![]() |
RVALDAT - USHOUR_MIN | Lower limit for usage hours | |
379 | ![]() |
SYST - CUCOL | ABAP System Field: Horizontal Cursor Position in PAI | |
380 | ![]() |
SYST - CUROW | ABAP System Field: Vertical Cursor Position in PAI | |
381 | ![]() |
SYST - DATUM | ABAP System Field: Current Date of Application Server | |
382 | ![]() |
SYST - DYNNR | ABAP System Field: Current Dynpro Number | |
383 | ![]() |
SYST - INDEX | ABAP System Field: Loop Index | |
384 | ![]() |
SYST - LANGU | ABAP System Field: Language Key of Text Environment | |
385 | ![]() |
SYST - MSGID | ABAP System Field: Message ID | |
386 | ![]() |
SYST - MSGNO | ABAP System Field: Message Number | |
387 | ![]() |
SYST - MSGTY | ABAP System Field: Message Type | |
388 | ![]() |
SYST - MSGV1 | ABAP System Field: Message Variable | |
389 | ![]() |
SYST - MSGV2 | ABAP System Field: Message Variable | |
390 | ![]() |
SYST - MSGV3 | ABAP System Field: Message Variable | |
391 | ![]() |
SYST - MSGV4 | ABAP System Field: Message Variable | |
392 | ![]() |
SYST - STEPL | ABAP System Field: Current Step Loop or Table Control Line | |
393 | ![]() |
SYST - TABIX | ABAP System Field: Row Index of Internal Tables | |
394 | ![]() |
T100 - MSGNR | Message number | |
395 | ![]() |
TE121 - FEHLKLAS | Error class for validations | |
396 | ![]() |
TE121 - INTERV_TOL | Interval number for tolerance limits | |
397 | ![]() |
TE121 - PARFAKO | Upper displacement factor for moving tolerance limits | |
398 | ![]() |
TE121 - PARFAKU | Lower displacement factor for moving tolerance limits | |
399 | ![]() |
TE121 - PRUEFKL | Validation class for independent validations | |
400 | ![]() |
TE121 - STGFAKO | Upper limit gradient for moving tolerance limits | |
401 | ![]() |
TE121 - STGFAKU | Lower limit gradient for moving tolerance limits | |
402 | ![]() |
TE121 - VERBAB0 | Valid-from consumption for an interval of tolerance limits | |
403 | ![]() |
TE121 - VERBBIS0 | Valid-to consumption for an interval of tolerance limits | |
404 | ![]() |
TE121 - VERBOGA0 | Positive absolute consumption deviation w/o decimal places | |
405 | ![]() |
TE121 - VERBUGA0 | Negative absolute consumption deviation w/o decimal places | |
406 | ![]() |
TE121 - VOGRENZE | Percentage of positive consumption deviation | |
407 | ![]() |
TE121 - VUGRENZE | Percentage of negative consumption deviation | |
408 | ![]() |
TE218T - TEXT60 | Text Field of Length 60 | |
409 | ![]() |
TE219 - PRUEFKL | Validation class for independent validations | |
410 | ![]() |
TE219 - PRUEFPKT1 | Independent validation | |
411 | ![]() |
TE219 - PRUEFPKT10 | Independent validation | |
412 | ![]() |
TE219 - PRUEFPKT11 | Independent validation | |
413 | ![]() |
TE219 - PRUEFPKT2 | Independent validation | |
414 | ![]() |
TE219 - PRUEFPKT3 | Independent validation | |
415 | ![]() |
TE219 - PRUEFPKT4 | Independent validation | |
416 | ![]() |
TE219 - PRUEFPKT5 | Independent validation | |
417 | ![]() |
TE219 - PRUEFPKT6 | Independent validation | |
418 | ![]() |
TE219 - PRUEFPKT7 | Independent validation | |
419 | ![]() |
TE219 - PRUEFPKT8 | Independent validation | |
420 | ![]() |
TE219 - PRUEFPKT9 | Independent validation | |
421 | ![]() |
TE220 - PRUEFPKT1 | Independent validations (customer-specific) | |
422 | ![]() |
TE220 - PRUEFPKT10 | Independent validations (customer-specific) | |
423 | ![]() |
TE220 - PRUEFPKT11 | Independent validations (customer-specific) | |
424 | ![]() |
TE220 - PRUEFPKT2 | Independent validations (customer-specific) | |
425 | ![]() |
TE220 - PRUEFPKT3 | Independent validations (customer-specific) | |
426 | ![]() |
TE220 - PRUEFPKT4 | Independent validations (customer-specific) | |
427 | ![]() |
TE220 - PRUEFPKT5 | Independent validations (customer-specific) | |
428 | ![]() |
TE220 - PRUEFPKT6 | Independent validations (customer-specific) | |
429 | ![]() |
TE220 - PRUEFPKT7 | Independent validations (customer-specific) | |
430 | ![]() |
TE220 - PRUEFPKT8 | Independent validations (customer-specific) | |
431 | ![]() |
TE220 - PRUEFPKT9 | Independent validations (customer-specific) | |
432 | ![]() |
TE221 - MASS | Unit of Measurement | |
433 | ![]() |
TE266 - GEWKEY | Weighting key | |
434 | ![]() |
TE402 - ONLY_BILLING_REL | Field "MRR triggers billing" is permitted | |
435 | ![]() |
TE406 - ONLY_BILLING_REL | Main operation code for field "MRR triggers billing" | |
436 | ![]() |
TE409 - BENUTZSTD | Usage hours | |
437 | ![]() |
TE409 - DEACT_VAL96 | Deactivate validation for fixed value deviation | |
438 | ![]() |
TE409 - FEHLKLAS | Error class for validations | |
439 | ![]() |
TE409 - MAXLOPER | Permitted maximum demand | |
440 | ![]() |
TE409 - MINLOPER | Permitted minimum demand | |
441 | ![]() |
TE409 - PROZBSTD | Maximum deviation of usage hours in percent | |
442 | ![]() |
TE409 - PRUEFKL | Validation class for independent validations | |
443 | ![]() |
TE410S - NO_DEPVAL_SECREG | Do not include secondary meter in dependent validation | |
444 | ![]() |
TE411 - SPEZVERF | User exit control for estimation of results | |
445 | ![]() |
TE414 - POPCODE | Dependent validation | |
446 | ![]() |
TE414 - PRUEFGR | Validation group for dependent validations | |
447 | ![]() |
TE422 - PERIODEW | Period length: months | |
448 | ![]() |
TE436T - TEXT40 | Text, 40 Characters Long | |
449 | ![]() |
TE437 - FABW_GER | Fixed value deviation for devices without inst. allocation | |
450 | ![]() |
TE438 - MAXANZABL | Permitted number of estimations and customer MRs | |
451 | ![]() |
TE438 - MAXANZKSA | Permitted number of meter readings by customer | |
452 | ![]() |
TE438 - MAXANZSCH | Permitted number of automatic estimations | |
453 | ![]() |
TE614 - ABLESART | Meter reading category | |
454 | ![]() |
TE625T - TEXT60 | Text Field of Length 60 | |
455 | ![]() |
TE901 - DYNNR | Number of the following screen | |
456 | ![]() |
TE901 - NO_FUNCALL | No of Function Modules for User-Defined Dependent Validation | |
457 | ![]() |
TE901 - PRUEFPKT | Independent validations (customer-specific) | |
458 | ![]() |
TESPT - SPARTYP | Division category | |
459 | ![]() |
VALDATA - ABLART | Meter reading category | |
460 | ![]() |
VALDATA - CONSMPT_EX | Expected consumption | |
461 | ![]() |
VALDATA - CSMPT_MAX | Maximum (permitted) expected consumption | |
462 | ![]() |
VALDATA - CSMPT_MIN | Minimum (permitted) expected consumption | |
463 | ![]() |
VALDATA - DEMAND_EX | Expected demand for a register | |
464 | ![]() |
VALDATA - DEMAND_MAX | Maximum permitted demand for a register | |
465 | ![]() |
VALDATA - DEMAND_MIN | Minimum permitted demand for a register | |
466 | ![]() |
VALDATA - DEM_GR_MAX | Maximum demand agreed upon in contract | |
467 | ![]() |
VALDATA - DEM_GR_MIN | Minimum demand agreed upon in contract | |
468 | ![]() |
VALDATA - FIXED_DEV | Screen field: fixed value deviation | |
469 | ![]() |
VALDATA - FIXED_DEV_ADMIT | Permissible fixed value deviation | |
470 | ![]() |
VALDATA - MR_EX | Expected meter reading | |
471 | ![]() |
VALDATA - MR_MAX | Maximum expected meter reading | |
472 | ![]() |
VALDATA - MR_MIN | Minimum expected meter reading | |
473 | ![]() |
VALDATA - NUMB_ADMIT | Number of permissible MRs by customer or estimations | |
474 | ![]() |
VALDATA - NUMB_MRPRE | Number of repeated meter readings by customer or estimations | |
475 | ![]() |
VALDATA - NUMB_RESET | Number of resettings for a register | |
476 | ![]() |
VALDATA - ORIG_MR_DUE | End of Comparison Period | |
477 | ![]() |
VALDATA - ORIG_MR_FROM | Start of comparison period | |
478 | ![]() |
VALDATA - RESET_EXP | Number of permissible resettings | |
479 | ![]() |
VALDATA - USAGE_HOUR | Usage hours | |
480 | ![]() |
VALDATA - USHOUR_EXP | Expected usage hours | |
481 | ![]() |
VALDATA - USHOUR_MAX | Upper limit for usage hours | |
482 | ![]() |
VALDATA - USHOUR_MIN | Lower limit for usage hours | |
483 | ![]() |
V_EANL - AB | Date from which time slice is valid | |
484 | ![]() |
V_EANL - ANLAGE | Installation | |
485 | ![]() |
V_EANL - BIS | Date at Which a Time Slice Expires | |
486 | ![]() |
V_EANL - TARIFTYP | Rate category | |
487 | ![]() |
V_EGER - AB | Date from which time slice is valid | |
488 | ![]() |
V_EGER - BIS | Date at Which a Time Slice Expires | |
489 | ![]() |
V_EGER - EQUNR | Equipment Number | |
490 | ![]() |
V_EGER - LOGIKNR | Logical device number |