Message Number list used by SAP ABAP Class MPLAN_SCHEDULE (Scheduling of Maintenance Plans)
SAP ABAP Class MPLAN_SCHEDULE (Scheduling of Maintenance Plans) is using
# | Object Type | Object Name | Object Description | Note |
---|---|---|---|---|
1 | Message Number | IP - 452 | A start in the cycle was executed for maintenance plan &1 | |
2 | Message Number | IP - 672 | A manual maintenance call may not exceed the contract end & | |
3 | Message Number | IP - 671 | A fixed date may not exceed the contract end & | |
4 | Message Number | IP - 670 | Maintenance plan can only be scheduled until end of contract | |
5 | Message Number | IP - 670 | Maintenance plan can only be scheduled until end of contract | |
6 | Message Number | IP - 478 | No called call is available to be completed | |
7 | Message Number | IP - 468 | The customer enhancement IPRM0005 (active) requires a start in the cycle | |
8 | Message Number | IP - 467 | Annual performance of counter & is less than or equal to 0 | |
9 | Message Number | IP - 459 | Predecessor to & not yet confirmed | |
10 | Message Number | IP - 678 | No date could be determined for plan &1 within the contract term | |
11 | Message Number | IP - 451 | No active maintenance cycles exist | |
12 | Message Number | IP - 448 | No counter reading entered yet for unit, & measuring point & | |
13 | Message Number | IP - 447 | No annual performance entered for measuring point & | |
14 | Message Number | IP - 446 | Warning: Planned date with call number &1 cannot be confirmed | |
15 | Message Number | IP - 445 | Skipping of this call not possible | |
16 | Message Number | IP - 442 | Planned date & cannot be confirmed | |
17 | Message Number | IP - 439 | Scheduling not possible, no maintenance items have yet been assigned | |
18 | Message Number | IP - 132 | The chosen time unit & is not time-dependent | |
19 | Message Number | IP - 702 | Strategy & has no packages | |
20 | Message Number | IP - 704 | All onetime packages for maintenance plan & have been called | |
21 | Message Number | IP - 704 | All onetime packages for maintenance plan & have been called | |
22 | Message Number | IP - 704 | All onetime packages for maintenance plan & have been called | |
23 | Message Number | IP - 705 | New plan offset is faulty | |
24 | Message Number | IP - 711 | No package selected | |
25 | Message Number | IP - 711 | No package selected | |
26 | Message Number | IP - 715 | Maintenance plan already scheduled | |
27 | Message Number | IP - 718 | You cannot enter negative counter readings | |
28 | Message Number | IP - 718 | You cannot enter negative counter readings | |
29 | Message Number | IP - 727 | Fixing not possible; Maintenance package &1 is not valid for &2 | |
30 | Message Number | IP - 728 | No meas.document available before &1 and &2 for counter &3. Plan &4 | |
31 | Message Number | IP - 820 | Strategy & does not exist | |
32 | Message Number | IP - 845 | The plan date entered is invalid for factory calendar &1 | |
33 | Message Number | IP - 889 | Planned date for maintenance plan &1 was scheduled for 00.00.0000 | |
34 | Message Number | IP - 400 | Release not possible as MaintPlan already released, called or skipped | |
35 | Message Number | IP - 428 | Scheduling record already confirmed | |
36 | Message Number | IP - 128 | Only values without post-decimal places are allowed | |
37 | Message Number | IP - 134 | Status "Inactive" set for maintenance plan & | |
38 | Message Number | IP - 134 | Status "Inactive" set for maintenance plan & | |
39 | Message Number | IP - 135 | Status "Deletion flag" set for maintenance plan & | |
40 | Message Number | IP - 140 | No unit is defined for 'DAY' | |
41 | Message Number | IP - 142 | Status "Deletion indicator" set for maintenance plan & | |
42 | Message Number | IP - 202 | Maintenance plan & scheduled | |
43 | Message Number | IP - 373 | Enter confirmation counter reading | |
44 | Message Number | IP - 374 | Entered counter reading greater than last entered counter reading | |
45 | Message Number | IP - 374 | Entered counter reading greater than last entered counter reading | |
46 | Message Number | IP - 374 | Entered counter reading greater than last entered counter reading | |
47 | Message Number | IP - 375 | Confirmation counter reading smaller than initial counter reading | |
48 | Message Number | IP - 376 | Confirmation counter reading smaller than last confirm. counter reading | |
49 | Message Number | IP - 398 | Counter &1 is INACTIVE; scheduling maintenance plan &2 not possible | |
50 | Message Number | IP - 415 | Planned date is in the past | |
51 | Message Number | IP - 426 | Maintenance plan & still without maintenance packages | |
52 | Message Number | IP - 423 | No start offset has been set | |
53 | Message Number | IP - 419 | Fixing date is after the next planned date of & | |
54 | Message Number | IP - 418 | Fixing date is before the previous call date | |
55 | Message Number | IP - 417 | Fixing date not possible before previous completion confirmation date | |
56 | Message Number | IP - 416 | Fixing not possible --> date already called | |
57 | Message Number | IP - 415 | Planned date is in the past | |
58 | Message Number | IP - 401 | Maintenance plan &1: Predecessor (call number &2) still on hold | |
59 | Message Number | IP - 414 | Enter a call date | |
60 | Message Number | IP - 413 | New completion confirmation date is before the old CompConf. date & | |
61 | Message Number | IP - 412 | Enter a completion confirmation date | |
62 | Message Number | IP - 411 | Enter a start date | |
63 | Message Number | IP - 405 | Call can no longer be skipped | |
64 | Message Number | IP - 404 | Call is already marked as skipped | |
65 | Message Number | IP - 403 | Fixing not possible as MaintPlan already released, called or skipped | |
66 | Message Number | IR - 044 | Enter a unit of measurement | |
67 | Message Number | IW - 590 | Confirmation time &1 &2 is in the future | |
68 | Message Number | MA - 112 | Date & comes after end of factory calendar with ID & | |
69 | Message Number | MA - 113 | Date & comes before start of factory calendar with ID & | |
70 | Message Number | MA - 111 | Factory calendar ID & does not exist or is not active | |
71 | Message Number | MPLAN - 520 | Maintenance plan &1 - method &2 not executable - single cycle plan | |
72 | Message Number | MPLAN - 534 | Entries in other fields will be ignored | |
73 | Message Number | MPLAN - 521 | Inconsistency - there are gaps in the sequence of call numbers | |
74 | Message Number | MPLAN - 522 | Maintenance plan &1 is time dependent; do not enter counter readings | |
75 | Message Number | MPLAN - 523 | See transaction IP03 for significance of both fields | |
76 | Message Number | MPLAN - 524 | Maintenance plan &1 call number &2 released | |
77 | Message Number | MPLAN - 525 | Maintenance plan &1 call number &2 fixed | |
78 | Message Number | MPLAN - 526 | Maintenance plan &1 call number &2 skipped | |
79 | Message Number | MPLAN - 527 | Maintenance plan &1 manual call number &2 added | |
80 | Message Number | MPLAN - 528 | Maintenance plan &2 call number &2 completed | |
81 | Message Number | MPLAN - 529 | Error when reading text for field &1 &2 | |
82 | Message Number | MPLAN - 530 | Counter reading entry not relevant for this maintenance plan category &1 | |
83 | Message Number | MPLAN - 531 | Time/date entry not relevant for this maintenance plan category &1 | |
84 | Message Number | MPLAN - 532 | Only the following fields are read for maintenance plan category &1: | |
85 | Message Number | MPLAN - 533 | &1 | |
86 | Message Number | MPLAN - 519 | Unit of measurement &1 not in table MMPT | |
87 | Message Number | MPLAN - 517 | Start of scheduling for maintenance plan &1 function &2 | |
88 | Message Number | MPLAN - 515 | Performance-based plans and multiple counter plans cannot be fixed | |
89 | Message Number | MPLAN - 512 | Maintenance plan &1: method &2 not executable - multiple counter plan | |
90 | Message Number | MPLAN - 511 | Scheduling could not be executed: maintenance plan &1 | |
91 | Message Number | MPLAN - 511 | Scheduling could not be executed: maintenance plan &1 | |
92 | Message Number | MPLAN - 511 | Scheduling could not be executed: maintenance plan &1 | |
93 | Message Number | MPLAN - 508 | Specified call number &1 does not exist in maintenance plan &2 | |
94 | Message Number | MPLAN - 507 | Enter a call number | |
95 | Message Number | MPLAN - 506 | Setting &1 to &2 | |
96 | Message Number | MPLAN - 505 | No entry found in table MMPT for cycle set seq. &1 and rep. factor &2 | |
97 | Message Number | MPLAN - 504 | Maintenance plan &1: only the following functions are allowed: &2 | |
98 | Message Number | MPLAN - 503 | Maintenance plan &1: inconsistency - call without history | |
99 | Message Number | MPLAN - 502 | Maintenance plan &1: enter cycle start for counter reading | |
100 | Message Number | MPLAN - 501 | Maintenance plan &1: function &2 not executable - still without calls |