SAP ABAP Message Class QT (QM: Inspection during production (with inspection points))

Basic Data

Hierarchy

☛ SAP_APPL (Software Component) Logistics and Accounting
   ⤷ QM-PT-BD-SPL (Application Component) Samples and SPC
     ⤷ QD (Package) QM dynamic modification

Attributes

Message class	QT
Short Description	QM: Inspection during production (with inspection points)
Changed On	20100310
Last Changed At	120827

Messages

#	Message	Message Short Text	Documentation status	Authorization check
1	001	The plant presetting is not completely maintained in the cust. applic.		☐
2	002	The insp. point ident. is not completely maintained in the cust. applic.		☐
3	003	The insp. point ident. is not completely maintained in the cust. applic.		☐
4	004	Error while accessing internal inspection point table		☐
5	005	The new partial lot &1 already exists_		☐
6	006	No selected set exists for the inspection point &1 or plant &2	Space: object requires documentation	☐
7	007	The plant presetting is not completely maintained in the cust. applic.		☐
8	008	You can only create inspection points in create mode		☐
9	009	Record inspection point identifier for the inspection lot		☐
10	010	To select a selected set, first enter a plant	Space: object requires documentation	☐
11	011	Error in change of system settings for inspection point (TQ79)	Space: object requires documentation	☐
12	012	Physical sample & does not belong to current inspection lot &	Space: object requires documentation	☐
13	013	Status does not allow results recording for physical sample &	Space: object requires documentation	☐
14	014	You have not yet entered sample & as a master record	Space: object requires documentation	☐
15	015	An inspection point already exists for the key fields	Space: object requires documentation	☐
16	016	You are not authorized to change the inspection point fields	Space: object requires documentation	☐
17	101	You cannot assign a sort number more than once		☐
18	102	A sort number with the value 1 is missing		☐
19	103	Results confirmation not possible with inspection points from PI sheet		☐
20	104	Number of user fields allowed has been exceeded	Space: object requires documentation	☐
21	110	The function module name & you entered is invalid	Space: object requires documentation	☐
22	111	The exceptions for function module &1 differ from the example module	Space: object requires documentation	☐
23	112	The export params for function module &1 differ from the example module	Space: object requires documentation	☐
24	113	The import params for function module &1 differ from the example module	Space: object requires documentation	☐
25	114	The tables for the function module &1 differ from the example module	Space: object requires documentation	☐
26	201	Enter 24:00:00 and not 00:00:00	Space: object requires documentation	☐
27	202	Specify &1	Space: object requires documentation	☐
28	203	You must assign a batch to the partial lot		☐
29	204	Check your entries	Space: object requires documentation	☐
30	205	You must assign a partial lot to the inspection point		☐
31	206	Enter quantity	Space: object requires documentation	☐
32	207	You have already assigned the number for a new batch		☐
33	208	The previous selection is canceled		☐
34	209	Enter inspection lot and operation first	Space: object requires documentation	☐
35	210	The entry made for the quantity is cancelled		☐
36	211	Quantity confirmation cannot be changed, data has been reset		☐
37	212	Control key does not allow the operation to be confirmed		☐
38	213	No inspection point available for the operation		☐
39	214	There is no scrap confirmation, although the inspection point is rejected		☐
40	215	The previous operation has not yet been confirmed		☐
41	216	For operation &2, a quantity has not yet been entered for partial lot &1		☐
42	217	There is still no batch assigned to the partial lot		☐
43	218	Set indicator 'No Confirmation'	Space: object requires documentation	☐
44	219	Confirmation will be canceled		☐
45	220	Confirmation is expected via process message		☐
46	221	Due to the status of the order, confirmation cannot be made to PP		☐
47	222	Confirmations were recorded in the header of order &1		☐
48	223	You are not authorized to carry out a PP confirmation		☐
49	224	Partial lot assignment to insp.point is available with another material		☐
50	225	No confirmation parameters are defined in plant &1 for order type &2	Space: object requires documentation	☐
51	226	Confirmation not allowed or not activated		☐
52	227	The unit of measurement is not defined for this material		☐
53	228	Operation &1 of sequence &2 cannot be confirmed		☐
54	229	This function is not supported for this order type		☐
55	230	&1 &2 do not exist in the object list for order &3	Space: object requires documentation	☐
56	231	There are no inspection points	Space: object requires documentation	☐
57	232	No inspection point was selected	Space: object requires documentation	☐
58	301	Valuation of the inspection point is transferred to the partial lot		☐
59	302	All entries for the new partial lot are lost after choosing a part. lot		☐
60	303	No inspection points are available for the partial lot &1		☐
61	304	Auto entry	Space: object requires documentation	☐
62	305	Inspection lot &1 cannot be found		☐
63	306	Inspection lot &1 is not relevant		☐
64	307	Partial lot &1 does not belong to inspection lot &2		☐
65	308	The inspection point changes are being saved		☐
66	309	Enter an inspection lot number	Space: object requires documentation	☐
67	310	There are no partial lots available for inspection lot &1		☐
68	311	The confirmation cannot be cancelled at this point.		☐
69	312	First maintain table TQ01 for transaction &	Space: object requires documentation	☐
70	313	Insp.point (phys.-sample no: &1) for insp.lot &2/ Op. &3 does not exist	Space: object requires documentation	☐
71	314	Code &1 does not exist in selected set &3	Space: object requires documentation	☐
72	320	Position the cursor on an inspection point line	Space: object requires documentation	☐
73	321	Position the cursor on a field for inspection point lines	Space: object requires documentation	☐
74	322	A maximum of three columns can be chosen as sort criteria		☐
75	323	The columns are no longer selected as sort criteria		☐
76	324	The list can be sorted according to the sort sequence you predefine		☐
77	400	Inspection lot &1 operation &2 is blocked by another user at present		☐
78	401	A system error has arisen in lock management		☐
79	402	You must assign a partial lot to the inspection point		☐
80	403	You must assign a batch to the partial lot		☐
81	404	Error in the transferred usage decision (selected set, code, code group)		☐
82	405	Material number does not exist in the plant.		☐
83	406	You must fill in the user field(s)		☐
84	407	You want to change data that may not be changed		☐
85	408	The selected set in the transfer record deviates from TQSS1/TQ79	Space: object requires documentation	☐
86	409	Materail &1 is at present blocked by another user		☐
87	410	You have no authorization for batch maintenance (neither batch nor plant)		☐
88	411	You have entered special characters that are not permitted in batch no.		☐
89	412	Valuation area not available		☐
90	413	Material &1, T149 not properly maintained		☐
91	414	Valuation records for material &1 incomplete		☐
92	415	Batch(&3) and/or partial lot(&2) in QAIPP(&1) is incompatible with TQSS1		☐
93	416	QAIPP (&1) contains batch (&2) that is incompatible with TQSS1		☐
94	417	No batches are supported for material &1		☐
95	418	User fields will deviate if changed		☐
96	419	Record type Q83, although sample number already exists in the DB		☐
97	420	Inspection lot is not relevant to inspection point development		☐
98	421	A sample number already exists for the given key fields		☐
99	422	No authorization for the usage decision		☐
100	423	Error converting the unit of measure		☐
101	424	Field &1 in the QAIPP record not filled in		☐
102	425	Conversion to the target unit of measure not possible		☐
103	426	Error converting user fields (QAIPP-USERC1 and QAIPP-USERC2)		☐
104	427	QM plant table (TQSS1) not maintained for plant &1		☐
105	428	QAIPP contains neither a quantity nor no. of rejects		☐
106	429	QAIPP has a qty entry, although a qty for partial lot &1 has been entered		☐
107	430	Material number(QAIPP) differs from material number in the inspection lot	Space: object requires documentation	☐
108	431	Inspection lot &1 is currently blocked by another user	Space: object requires documentation	☐
109	432	Phys. sample &1 is already blocked	Space: object requires documentation	☐
110	433	Quantity entered not allowed due to insp. point completion &1 (op. &2)	Space: object requires documentation	☐
111	434	Object (&) is not in the order's object list	Space: object requires documentation	☐
112	435	Error occured during confirmation	The short text describes the object sufficiently	☐
113	500	XPRA : In client &, & QAPP records (insp. points) were converted		☐
114	501	XPRA : Converter program not needed for source release version &		☐
115	502	XPRA : Repository switch inactive		☐
116	888	Abnormal termination: database error &1 &2 &3 &4		☐

History

Last changed on/by	20100310	SAP
SAP Release Created in