# |
Message |
Message Short Text |
Documentation status |
Authorization check |
1 |
000 |
*********** Rule Setup *********** |
The short text describes the object sufficiently |
|
2 |
001 |
& |
The short text describes the object sufficiently |
|
3 |
002 |
& & |
The short text describes the object sufficiently |
|
4 |
003 |
Invalid control name & |
The short text describes the object sufficiently |
|
5 |
004 |
Invalid rule name & |
The short text describes the object sufficiently |
|
6 |
005 |
Invalid analysis type |
The short text describes the object sufficiently |
|
7 |
006 |
Invalid analysis indicator |
The short text describes the object sufficiently |
|
8 |
007 |
Invalid rule criteria & |
The short text describes the object sufficiently |
|
9 |
008 |
Invalid rule schema number |
The short text describes the object sufficiently |
|
10 |
009 |
You cannot change the analysis type and indicator for the same rule set |
The short text describes the object sufficiently |
|
11 |
010 |
Enter schema number |
The short text describes the object sufficiently |
|
12 |
011 |
Enter analysis type |
The short text describes the object sufficiently |
|
13 |
012 |
Enter analysis indicator |
The short text describes the object sufficiently |
|
14 |
013 |
Enter NA or A or P or Z for the analysis indicator |
The short text describes the object sufficiently |
|
15 |
014 |
Enter S for the analysis type |
The short text describes the object sufficiently |
|
16 |
015 |
Enter ABS Deficiency only |
The short text describes the object sufficiently |
|
17 |
016 |
Enter Inclusive/Exclusive indicator is not allowed |
The short text describes the object sufficiently |
|
18 |
017 |
Enter % Deficiency only |
The short text describes the object sufficiently |
|
19 |
018 |
Enter deficiency value |
The short text describes the object sufficiently |
|
20 |
019 |
High value cannot be greater than low value |
The short text describes the object sufficiently |
|
21 |
020 |
Medium value cannot be greater than low value |
The short text describes the object sufficiently |
|
22 |
021 |
High value cannot be greater than medium value |
The short text describes the object sufficiently |
|
23 |
022 |
Medium value cannot be greater than high value |
The short text describes the object sufficiently |
|
24 |
023 |
Low value cannot be greater than medium value |
The short text describes the object sufficiently |
|
25 |
024 |
Low value cannot be greater than high value |
The short text describes the object sufficiently |
|
26 |
025 |
% high cannot be greater than % medium |
The short text describes the object sufficiently |
|
27 |
026 |
% medium cannot be greater than % low |
The short text describes the object sufficiently |
|
28 |
027 |
% high cannot be greater than % low |
The short text describes the object sufficiently |
|
29 |
028 |
% medium cannot be greater than % high |
The short text describes the object sufficiently |
|
30 |
029 |
% low cannot be greater than % medium |
The short text describes the object sufficiently |
|
31 |
030 |
% low cannot be greater than % high |
The short text describes the object sufficiently |
|
32 |
031 |
Enter value range |
The short text describes the object sufficiently |
|
33 |
032 |
Enter Inclusive/Exclusive indicator |
The short text describes the object sufficiently |
|
34 |
033 |
Enter Inclusive/Exclusive indicator is not allowed |
The short text describes the object sufficiently |
|
35 |
034 |
Enter E or M or C or NA as the analysis type for control scan |
The short text describes the object sufficiently |
|
36 |
035 |
Enter an analysis type |
The short text describes the object sufficiently |
|
37 |
036 |
Enter an analysis indicator |
The short text describes the object sufficiently |
|
38 |
037 |
Enter C, E, F, V, N or NA as the analysis indicator |
The short text describes the object sufficiently |
|
39 |
038 |
Deficiency value/indicator/type is not allowed for analysis type NA |
The short text describes the object sufficiently |
|
40 |
039 |
Enter NA for analysis indicator |
The short text describes the object sufficiently |
|
41 |
040 |
Currency key entry is not allowed |
The short text describes the object sufficiently |
|
42 |
041 |
Value range entry is not allowed |
The short text describes the object sufficiently |
|
43 |
042 |
Inclusive/Exclusive indicator entry is not allowed |
The short text describes the object sufficiently |
|
44 |
043 |
Enter E for analysis indicator |
The short text describes the object sufficiently |
|
45 |
044 |
Enter F or N for analysis indicator |
The short text describes the object sufficiently |
|
46 |
045 |
Enter C or N or F for analysis indicator |
The short text describes the object sufficiently |
|
47 |
046 |
Mark Field existence check indicator |
The short text describes the object sufficiently |
|
48 |
047 |
Mark Field existence check indicator only |
The short text describes the object sufficiently |
|
49 |
048 |
Deficiency value entry is not allowed |
The short text describes the object sufficiently |
|
50 |
049 |
Mark Deficiency indicator |
The short text describes the object sufficiently |
|
51 |
050 |
Mark Check Type is not allowed |
The short text describes the object sufficiently |
|
52 |
051 |
Mark Deficiency indicator |
The short text describes the object sufficiently |
|
53 |
052 |
Mark Blank check or Value check indicator |
The short text describes the object sufficiently |
|
54 |
053 |
Value check and Blank check cannot be selected together |
The short text describes the object sufficiently |
|
55 |
054 |
Mark Blank check or Value check indicator only |
The short text describes the object sufficiently |
|
56 |
055 |
Mark Deficiency indicator is not allowed |
The short text describes the object sufficiently |
|
57 |
056 |
Mark Review Required indicator is not allowed |
The short text describes the object sufficiently |
|
58 |
057 |
Mark Number of Change indicator |
The short text describes the object sufficiently |
|
59 |
058 |
Mark Number of Change indicator only |
The short text describes the object sufficiently |
|
60 |
059 |
Enter % Deficiency Value is not allowed |
The short text describes the object sufficiently |
|
61 |
060 |
Mark Deficiency indicator is not allowed |
The short text describes the object sufficiently |
|
62 |
061 |
Only one Deficiency Indicator allowed |
The short text describes the object sufficiently |
|
63 |
062 |
Enter Numeric Value for Deficiency only |
The short text describes the object sufficiently |
|
64 |
063 |
% Highs cannot be greater than % Medium |
The short text describes the object sufficiently |
|
65 |
064 |
% High cannot be greater than % Low |
The short text describes the object sufficiently |
|
66 |
065 |
% Low must be greater than % Medium |
The short text describes the object sufficiently |
|
67 |
066 |
% Low must be less than % Medium |
The short text describes the object sufficiently |
|
68 |
067 |
Enter ABS or % deficiency value |
The short text describes the object sufficiently |
|
69 |
068 |
Enter deficiency value only |
The short text describes the object sufficiently |
|
70 |
069 |
Enter a numeric value without decimal point |
The short text describes the object sufficiently |
|
71 |
070 |
High deficiency value cannot be greater than Medium deficiency value |
The short text describes the object sufficiently |
|
72 |
071 |
High deficiency value cannot be greater than Low deficiency Value |
The short text describes the object sufficiently |
|
73 |
072 |
High deficiency value must be greater than Medium deficiency value |
The short text describes the object sufficiently |
|
74 |
073 |
High deficiency value must be greater than Low deficiency value |
The short text describes the object sufficiently |
|
75 |
074 |
Mark one Deficiency indicator |
The short text describes the object sufficiently |
|
76 |
075 |
Data successfully created |
The short text describes the object sufficiently |
|
77 |
076 |
Data successfully updated |
The short text describes the object sufficiently |
|
78 |
077 |
Data successfully deleted |
The short text describes the object sufficiently |
|
79 |
078 |
Enter Value-to |
The short text describes the object sufficiently |
|
80 |
079 |
Value-to entry is not allowed |
The short text describes the object sufficiently |
|
81 |
080 |
Invalid Range entry |
The short text describes the object sufficiently |
|
82 |
081 |
Value-from is initial |
The short text describes the object sufficiently |
|
83 |
082 |
SAP Table/Field name not found for Rule Criteria |
The short text describes the object sufficiently |
|
84 |
083 |
Invalid RFC destination & |
The short text describes the object sufficiently |
|
85 |
084 |
Rule is initial |
The short text describes the object sufficiently |
|
86 |
085 |
Rule criteria is initial |
The short text describes the object sufficiently |
|
87 |
086 |
Rule parameter is initial |
The short text describes the object sufficiently |
|
88 |
087 |
Rule criteria value counter is initial |
The short text describes the object sufficiently |
|
89 |
088 |
Rule criteria created successfully |
The short text describes the object sufficiently |
|
90 |
089 |
Rule criteria updated successfully |
The short text describes the object sufficiently |
|
91 |
090 |
Rule criteria deleted successfully |
The short text describes the object sufficiently |
|
92 |
091 |
Enter % Deficiency value |
The short text describes the object sufficiently |
|
93 |
092 |
Enter a currency |
The short text describes the object sufficiently |
|
94 |
093 |
Save data first |
The short text describes the object sufficiently |
|
95 |
094 |
Save failed |
The short text describes the object sufficiently |
|
96 |
095 |
Record already exists, use a different name |
The short text describes the object sufficiently |
|
97 |
096 |
Rule parameter description is initial |
The short text describes the object sufficiently |
|
98 |
097 |
Script is initial |
The short text describes the object sufficiently |
|
99 |
098 |
Valid-to date must be greater than or equal to valid-from date |
The short text describes the object sufficiently |
|
100 |
099 |
Rule &1 cannot be deleted |
The short text describes the object sufficiently |
|
101 |
100 |
Analysis is initial |
The short text describes the object sufficiently |
|
102 |
101 |
Rule already created |
The short text describes the object sufficiently |
|
103 |
102 |
Invalid analysis & |
The short text describes the object sufficiently |
|
104 |
103 |
Enter numeric deficiency value |
The short text describes the object sufficiently |
|
105 |
104 |
Rule step is initial |
The short text describes the object sufficiently |
|
106 |
105 |
Rule status is initial |
The short text describes the object sufficiently |
|
107 |
106 |
Rule group is initial |
The short text describes the object sufficiently |
|
108 |
107 |
System type is initial |
The short text describes the object sufficiently |
|
109 |
108 |
Invalid connector '&' |
The short text describes the object sufficiently |
|
110 |
109 |
Rule parameter already created |
The short text describes the object sufficiently |
|
111 |
110 |
Enter analysis & or & |
The short text describes the object sufficiently |
|
112 |
111 |
Enter rule parameter detail |
The short text describes the object sufficiently |
|
113 |
112 |
Valid-from date initial |
The short text describes the object sufficiently |
|
114 |
113 |
Valid-to date is initial |
The short text describes the object sufficiently |
|
115 |
114 |
Description is initial |
The short text describes the object sufficiently |
|
116 |
115 |
Invalid rule group & |
The short text describes the object sufficiently |
|
117 |
116 |
Enter a deficiency value for all rule criteria |
The short text describes the object sufficiently |
|
118 |
117 |
Enter at least one non & analysis |
The short text describes the object sufficiently |
|
119 |
118 |
Data successfully saved |
The short text describes the object sufficiently |
|
120 |
119 |
Invalid analysis |
The short text describes the object sufficiently |
|
121 |
120 |
Enter an analysis check type & |
The short text describes the object sufficiently |
|
122 |
121 |
Enter analysis & |
The short text describes the object sufficiently |
|
123 |
122 |
Value-from is initial |
The short text describes the object sufficiently |
|
124 |
123 |
Invalid Value-from & |
The short text describes the object sufficiently |
|
125 |
124 |
Invalid Value-to & |
The short text describes the object sufficiently |
|
126 |
125 |
Overlapping occurs when value is created |
The short text describes the object sufficiently |
|
127 |
126 |
Rule & already assigned to controls |
The short text describes the object sufficiently |
|
128 |
127 |
Rule criteria value overlapping occurs in & |
The short text describes the object sufficiently |
|
129 |
128 |
Invalid currency |
The short text describes the object sufficiently |
|
130 |
129 |
Value-to must be greater than Value-from in rule criteria '&' |
The short text describes the object sufficiently |
|
131 |
130 |
No operator (BETWEEN) to exclude for Value-from & |
The short text describes the object sufficiently |
|
132 |
131 |
Mark the Review Required indicator |
The short text describes the object sufficiently |
|
133 |
132 |
Mark the Low/Medium/High indicator |
The short text describes the object sufficiently |
|
134 |
133 |
For script type '&' only one parameter is allowed |
The short text describes the object sufficiently |
|
135 |
134 |
Response mode is initial |
The short text describes the object sufficiently |
|
136 |
135 |
Risk value relevance is initial |
The short text describes the object sufficiently |
|
137 |
136 |
Select a rule parameter |
The short text describes the object sufficiently |
|
138 |
137 |
Select exactly one row in the value list to copy the value |
The short text describes the object sufficiently |
|
139 |
138 |
Rule & already exist |
The short text describes the object sufficiently |
|
140 |
139 |
Rule & does not exist |
The short text describes the object sufficiently |
|
141 |
140 |
Original rule & does not exist |
The short text describes the object sufficiently |
|
142 |
141 |
New rule & already exists |
The short text describes the object sufficiently |
|
143 |
142 |
Original rule and New rule cannot be the same |
The short text describes the object sufficiently |
|
144 |
143 |
Original rule is initial |
The short text describes the object sufficiently |
|
145 |
144 |
New rule is initial |
The short text describes the object sufficiently |
|
146 |
145 |
More than one non '&' analysis type found |
The short text describes the object sufficiently |
|
147 |
146 |
Enter & check type |
The short text describes the object sufficiently |
|
148 |
147 |
Rule & does not exist, refresh rule list |
The short text describes the object sufficiently |
|
149 |
148 |
Select a value to delete |
The short text describes the object sufficiently |
|
150 |
149 |
Rule & successfully copied |
The short text describes the object sufficiently |
|
151 |
150 |
Name is initial |
The short text describes the object sufficiently |
|
152 |
151 |
Connector mismatch between control and rule |
The short text describes the object sufficiently |
|
153 |
152 |
Connector &1 is inactive |
The short text describes the object sufficiently |
|
154 |
153 |
For '&' Value-from should be selected |
The short text describes the object sufficiently |
|
155 |
154 |
For '&' Value-to should not be selected |
The short text describes the object sufficiently |
|
156 |
155 |
Valid-to date must be greater than or equal to current date |
The short text describes the object sufficiently |
|
157 |
156 |
Rule & already executed - No modification allowed |
The short text describes the object sufficiently |
|
158 |
157 |
Enter deficiency value in one rule criteria only |
The short text describes the object sufficiently |
|
159 |
158 |
Enter deficiency value in one rule criteria |
The short text describes the object sufficiently |
|
160 |
159 |
Save the rule parameter first |
The short text describes the object sufficiently |
|
161 |
160 |
Enter a rule parameter |
The short text describes the object sufficiently |
|
162 |
161 |
For Exclude operator Value-from and Value-to cannot be '*' |
The short text describes the object sufficiently |
|
163 |
162 |
For Between operator Value-from and Value-to should be selected |
The short text describes the object sufficiently |
|
164 |
163 |
For Include operator Value-from should be selected |
The short text describes the object sufficiently |
|
165 |
164 |
For Exclude operator Value-from should be selected |
The short text describes the object sufficiently |
|
166 |
165 |
For Include operator Value-to should not be selected |
The short text describes the object sufficiently |
|
167 |
166 |
Rule & is scheduled for test |
The short text describes the object sufficiently |
|
168 |
167 |
Enter analysis & or & or & |
The short text describes the object sufficiently |
|
169 |
168 |
For Exclude operator Value-to cannot be '--' |
The short text describes the object sufficiently |
|
170 |
169 |
For Between operator Value-to cannot be '--' |
The short text describes the object sufficiently |
|
171 |
170 |
Enter a numeric filter value for & |
The short text describes the object sufficiently |
|
172 |
171 |
Enter only one deficiency value for range 'Not equal to' |
The short text describes the object sufficiently |
|
173 |
172 |
Medium deficiency value must be greater than low deficiency value |
The short text describes the object sufficiently |
|
174 |
173 |
Medium deficiency value cannot be greater than low deficiency value |
The short text describes the object sufficiently |
|
175 |
174 |
Enter a valid date (for example, &) |
The short text describes the object sufficiently |
|
176 |
175 |
Enter a connector |
The short text describes the object sufficiently |
|
177 |
176 |
Mark 'Select one connector' to enter a target connector |
The short text describes the object sufficiently |
|
178 |
178 |
Enter % deficiency value |
The short text describes the object sufficiently |
|
179 |
179 |
Enter ABS deficiency value |
The short text describes the object sufficiently |
|
180 |
180 |
Field name '&' does not exist in Table '&' |
The short text describes the object sufficiently |
|
181 |
181 |
Entry of monitor value analysis is not allowed |
The short text describes the object sufficiently |
|
182 |
182 |
Entry of a filter value for deficiency rule criteria is not allowed |
The short text describes the object sufficiently |
|
183 |
183 |
Enter date filter value using format 'YYYYMMDD' for rule criteria '&' |
The short text describes the object sufficiently |
|
184 |
184 |
Enter a numeric value without decimal point filter value for & |
The short text describes the object sufficiently |
|
185 |
185 |
Invalid date filter value for & |
The short text describes the object sufficiently |
|
186 |
186 |
Mark output indicator to 'Yes' for rule criteria '&' |
The short text describes the object sufficiently |
|
187 |
187 |
Primary connector '&' does not exist in Script Connector Assignment |
The short text describes the object sufficiently |
|
188 |
188 |
Tolerance value '&' cannot be the same |
The short text describes the object sufficiently |
|
189 |
189 |
Script & successfully copied |
The short text describes the object sufficiently |
|
190 |
190 |
Enter rule parameter details for Rule Script with 'Value Check' |
The short text describes the object sufficiently |
|
191 |
191 |
Enter Rule Criteria detail |
The short text describes the object sufficiently |
|
192 |
192 |
Mark either Review Required or Deficiency Indicator - Cannot mark both |
The short text describes the object sufficiently |
|
193 |
193 |
Primary connector '&' does not exist in Script Connector Assignment |
The short text describes the object sufficiently |
|
194 |
194 |
Select a script before entering rule criteria |
The short text describes the object sufficiently |
|
195 |
195 |
Enter Rule Name before entering rule criteria |
The short text describes the object sufficiently |
|
196 |
196 |
No available rule criteria to be added |
The short text describes the object sufficiently |
|
197 |
197 |
Change the rule status to 'Released' |
The short text describes the object sufficiently |
|
198 |
199 |
Value-to '&' must be greater than Value-from '&' in rule criteria '&' |
The short text describes the object sufficiently |
|
199 |
200 |
*********** Control Rule Assignment *********** |
The short text describes the object sufficiently |
|
200 |
201 |
Select a rule |
The short text describes the object sufficiently |
|
201 |
202 |
Select a frequency |
The short text describes the object sufficiently |
|
202 |
203 |
Select either Compliance or Monitoring or both for every frequency |
The short text describes the object sufficiently |
|
203 |
204 |
Frequency not selected for one or more rules |
The short text describes the object sufficiently |
|
204 |
205 |
Select a valid row to remove |
The short text describes the object sufficiently |
|
205 |
206 |
Rules have been assigned to the selected control |
The short text describes the object sufficiently |
|
206 |
207 |
Assign rules to at least one control |
The short text describes the object sufficiently |
|
207 |
208 |
Select a control |
The short text describes the object sufficiently |
|
208 |
209 |
Failed to assign rules to the control(s) |
The short text describes the object sufficiently |
|
209 |
210 |
Control rule assignment is not valid |
The short text describes the object sufficiently |
|
210 |
211 |
Rule cannot be removed because it is used in scheduling |
The short text describes the object sufficiently |
|
211 |
212 |
Rules have been successfully assigned to the selected control |
The short text describes the object sufficiently |
|
212 |
213 |
Rule/frequency was updated |
The short text describes the object sufficiently |
|
213 |
214 |
Rule/frequency was removed |
The short text describes the object sufficiently |
|
214 |
215 |
No rules were selected for assignment |
The short text describes the object sufficiently |
|
215 |
216 |
Enter F or V for analysis indicator |
The short text describes the object sufficiently |
|
216 |
217 |
Script '&' does not exist |
The short text describes the object sufficiently |
|
217 |
218 |
Invalid analysis type '&' for Change log check |
The short text describes the object sufficiently |
|
218 |
219 |
Invalid analysis type '&' for value check |
The short text describes the object sufficiently |
|
219 |
220 |
High deficiency '&' cannot be greater than mMedium deficiency '&' |
The short text describes the object sufficiently |
|
220 |
221 |
High deficiency '&' cannot be greater than low deficiency '&' |
The short text describes the object sufficiently |
|
221 |
222 |
High deficiency '&' must be greater than medium deficiency '&' |
The short text describes the object sufficiently |
|
222 |
223 |
High deficiency '&' must be greater than low deficiency '&' |
The short text describes the object sufficiently |
|
223 |
224 |
Medium deficiency '&' must be greater than low deficiency '&' |
The short text describes the object sufficiently |
|
224 |
225 |
Medium deficiency '&' cannot be greater than low deficiency '&' |
The short text describes the object sufficiently |
|
225 |
226 |
Rule name is not defined in the Event registry |
The short text describes the object sufficiently |
|
226 |
227 |
Rule name is defined in Event registry table for Event-based rule |
The short text describes the object sufficiently |
|
227 |
228 |
Rule script must start with 'Y' or 'Z' for SAP system type |
The short text describes the object sufficiently |
|
228 |
229 |
Rule must start with 'Y' or 'Z' for SAP system type |
The short text describes the object sufficiently |
|
229 |
230 |
Create variant GRC_DEFAULT for report in ERP before creating a plan |
The short text describes the object sufficiently |
|
230 |
231 |
Business rule assigned already, could not assign legacy rule anymore |
The short text describes the object sufficiently |
|
231 |
300 |
*********** Rule Script *********** |
The short text describes the object sufficiently |
|
232 |
301 |
Enter the Rule Script Name |
The short text describes the object sufficiently |
|
233 |
302 |
Enter the System Type |
The short text describes the object sufficiently |
|
234 |
303 |
Enter the Rule Script Category |
The short text describes the object sufficiently |
|
235 |
304 |
Enter the Rule Script Type |
The short text describes the object sufficiently |
|
236 |
305 |
Rule Script already exists. Choose a different name |
The short text describes the object sufficiently |
|
237 |
306 |
Rule Script created |
The short text describes the object sufficiently |
|
238 |
307 |
Rule Script deleted |
The short text describes the object sufficiently |
|
239 |
308 |
Enter the Description |
The short text describes the object sufficiently |
|
240 |
309 |
Rule Script does not exist |
The short text describes the object sufficiently |
|
241 |
310 |
Rule Script updated |
The short text describes the object sufficiently |
|
242 |
311 |
Rule Script name cannot contain empty space. Enter another name |
The short text describes the object sufficiently |
|
243 |
312 |
The rule criteria &1 already exists. It is not dynamically updated |
The short text describes the object sufficiently |
|
244 |
313 |
Rule Script is assigned to a Rule and cannot be deleted |
The short text describes the object sufficiently |
|
245 |
314 |
Rule Criteria cannot be deleted.Check Rule Parameter Assignment |
The short text describes the object sufficiently |
|
246 |
315 |
Enter the Program Name |
The short text describes the object sufficiently |
|
247 |
316 |
Connector not specified |
The short text describes the object sufficiently |
|
248 |
317 |
Query not selected |
The short text describes the object sufficiently |
|
249 |
318 |
Select a Rule Script |
The short text describes the object sufficiently |
|
250 |
319 |
Assign Rule Criteria to the Rule Script |
The short text describes the object sufficiently |
|
251 |
320 |
Enter a positive value |
The short text describes the object sufficiently |
|
252 |
321 |
Query is not supported for system type Local and Access Control |
The short text describes the object sufficiently |
|
253 |
322 |
Query is supported only for system type SAP or Multi Application Query |
The short text describes the object sufficiently |
|
254 |
323 |
Table/View not selected |
The short text describes the object sufficiently |
|
255 |
324 |
Rule Criteria '&' cannot be deleted.Check Rule Parameter Assignment |
The short text describes the object sufficiently |
|
256 |
325 |
Enter Analysis Type |
The short text describes the object sufficiently |
|
257 |
326 |
Table Name changed. Look up table again |
The short text describes the object sufficiently |
|
258 |
327 |
Look up Table first |
The short text describes the object sufficiently |
|
259 |
328 |
Enter Table Name |
The short text describes the object sufficiently |
|
260 |
329 |
Enter Class Name |
The short text describes the object sufficiently |
|
261 |
330 |
Enter Table Type |
The short text describes the object sufficiently |
|
262 |
331 |
Mark either Filter or Deficiency indicator for Rule Criteria & |
The short text describes the object sufficiently |
|
263 |
332 |
Table/View '&' is not allowed for Script Category '&' |
The short text describes the object sufficiently |
|
264 |
333 |
Cannot find the definition for the Script '&' |
The short text describes the object sufficiently |
|
265 |
334 |
Mark at least one Rule Criteria as Deficiency |
The short text describes the object sufficiently |
|
266 |
335 |
No Table Name available in search criteria |
The short text describes the object sufficiently |
|
267 |
336 |
Assign Rule Criteria Deficiency Indicator to one table only |
The short text describes the object sufficiently |
|
268 |
337 |
Mark at least one Rule Criteria Output Indicator to 'Yes' |
The short text describes the object sufficiently |
|
269 |
338 |
Primary Connector is initial |
The short text describes the object sufficiently |
|
270 |
339 |
Mark one data type 'DATS' Rule Criteria as 'Date Relevance' |
The short text describes the object sufficiently |
|
271 |
340 |
Mark Date Relevance Indicator to data type 'DATS' Rule Criteria only |
The short text describes the object sufficiently |
|
272 |
341 |
Mark all deficiency Rule Criteria as Output field |
The short text describes the object sufficiently |
|
273 |
342 |
Connector Assignment is initial |
The short text describes the object sufficiently |
|
274 |
343 |
Enter Sequence Number for all Output Rule Criteria |
The short text describes the object sufficiently |
|
275 |
344 |
Enter unique Output Sequence Number for all Output Rule Criterias |
The short text describes the object sufficiently |
|
276 |
345 |
Enter Output Sequence Number for Output Rule Criteria only |
The short text describes the object sufficiently |
|
277 |
346 |
Mark Deficiency Rule Criteria on table '&' only |
The short text describes the object sufficiently |
|
278 |
347 |
RFC destination '&' does not exist |
The short text describes the object sufficiently |
|
279 |
348 |
Enter Output Sequence for Rule Criteria '&' |
The short text describes the object sufficiently |
|
280 |
349 |
Delete Primary Connector '&' from list is not allowed |
The short text describes the object sufficiently |
|
281 |
350 |
Class/Program Name not selected |
The short text describes the object sufficiently |
|
282 |
351 |
No Program/Class Name available in search criteria |
The short text describes the object sufficiently |
|
283 |
352 |
Field Name '&' is not exist in Table '&' for Rule Criteria '&' |
The short text describes the object sufficiently |
|
284 |
353 |
Script not found for selected connector: & |
The short text describes the object sufficiently |
|
285 |
354 |
Table Name '&' is not exist for Rule Criteria '&' |
The short text describes the object sufficiently |
|
286 |
355 |
Inactive Connector '&' |
The short text describes the object sufficiently |
|
287 |
356 |
Invalid Analysis Type '&' from programmed control '&' definition |
The short text describes the object sufficiently |
|
288 |
357 |
Invalid Script Category '&' found from programmed control '&' definition |
The short text describes the object sufficiently |
|
289 |
358 |
User group not found & |
The short text describes the object sufficiently |
|
290 |
359 |
Query not found @ |
The short text describes the object sufficiently |
|
291 |
360 |
Missing query info |
The short text describes the object sufficiently |
|
292 |
361 |
Selection fields not found |
The short text describes the object sufficiently |
|
293 |
362 |
Invalid Analysis Type '&' for Script Category '&' |
The short text describes the object sufficiently |
|
294 |
363 |
Only one deficiency Rule Criteria allowed |
The short text describes the object sufficiently |
|
295 |
364 |
Script entry table GRPCRTA_CTRLDEF does not exist in connector '&' |
The short text describes the object sufficiently |
|
296 |
365 |
Script entry table GRPCRTA_SCRIPTOB does not exist in connector '&' |
The short text describes the object sufficiently |
|
297 |
366 |
Mark only one data type 'DATS' Rule Criteria as 'Date Relevance' |
The short text describes the object sufficiently |
|
298 |
367 |
Program parameters does not exits in connector '&' |
The short text describes the object sufficiently |
|
299 |
368 |
Query parameters does not exits in connector '&' |
The short text describes the object sufficiently |
|
300 |
369 |
Program parameters in connector '&' does not match with primary '&' |
The short text describes the object sufficiently |
|
301 |
370 |
Query parameters in connector '&' does not match with primary '&' |
The short text describes the object sufficiently |
|
302 |
371 |
Deficiency value must contain a numerical value; & is not allowed |
The short text describes the object sufficiently |
|
303 |
372 |
Add primary connector '&' to connector assignment |
The short text describes the object sufficiently |
|
304 |
373 |
Add at least one data type 'DATS' (Date Relevance) Rule Criteria to Rule |
The short text describes the object sufficiently |
|
305 |
374 |
Mark Output Indicator to 'Yes' for Rule Criteria '&' |
The short text describes the object sufficiently |
|
306 |
375 |
Only one deficiency Rule Criteria allowed for Transaction Reporting |
The short text describes the object sufficiently |
|
307 |
376 |
Enter one deficiency Rule Criteria for Transaction Reporting |
The short text describes the object sufficiently |
|
308 |
378 |
Rule Script '&' created |
The short text describes the object sufficiently |
|
309 |
379 |
Rule Script '&' updated |
The short text describes the object sufficiently |
|
310 |
380 |
Rule Script '&' deleted |
The short text describes the object sufficiently |
|
311 |
381 |
Look up program first |
The short text describes the object sufficiently |
|
312 |
382 |
Look up query first |
The short text describes the object sufficiently |
|
313 |
383 |
Rule Criteria '&' cannot be deleted. Rule Criteria is assigned to a Rule |
The short text describes the object sufficiently |
|
314 |
384 |
Select Rule Criteria to delete |
The short text describes the object sufficiently |
|
315 |
385 |
Business Warehouse is supported only for system type SAP |
The short text describes the object sufficiently |
|
316 |
386 |
Mark only one Rule Criteria as 'Date Relevance' |
The short text describes the object sufficiently |
|
317 |
387 |
No Query available in search criteria |
The short text describes the object sufficiently |
|
318 |
388 |
Script entry does not exist in table GRPCRTA_CTRLDEF for connector '&' |
The short text describes the object sufficiently |
|
319 |
389 |
Query does not exits in connector '&' |
The short text describes the object sufficiently |
|
320 |
390 |
Tables/View '&' and Object Class '&' does not exits in connector '&' |
The short text describes the object sufficiently |
|
321 |
391 |
Programmed Control Parameters does not exits in connector '&' |
The short text describes the object sufficiently |
|
322 |
392 |
Select Connector to delete |
The short text describes the object sufficiently |
|
323 |
393 |
Connector '&' can not be deleted. Connector is assigned to a Rule |
The short text describes the object sufficiently |
|
324 |
394 |
Rule Criteria '&' is not subject to change log recording in connector '&' |
The short text describes the object sufficiently |
|
325 |
395 |
Rule Criteria '&' does not exist in connector '&' |
The short text describes the object sufficiently |
|
326 |
396 |
Mark 'Filter' indicator for Date Relevance Rule Criteria '&' |
The short text describes the object sufficiently |
|
327 |
397 |
Rule Criteria '&' is not a selection field in the backend entry |
The short text describes the object sufficiently |
|
328 |
398 |
Rule Criteria '&' is not a deficiency field in the backend entry |
The short text describes the object sufficiently |
|
329 |
399 |
Deficiency Rule Criteria does not exist in the backend entry |
The short text describes the object sufficiently |
|
330 |
400 |
*********** Rule Criteria *********** |
The short text describes the object sufficiently |
|
331 |
401 |
Enter Rule Criteria |
The short text describes the object sufficiently |
|
332 |
402 |
Enter Rule Criteria Description |
The short text describes the object sufficiently |
|
333 |
403 |
Add at least one system type data |
The short text describes the object sufficiently |
|
334 |
404 |
For SAP System, enter either 'Table Name'/'Field Name' or 'Data Type' |
The short text describes the object sufficiently |
|
335 |
405 |
Enter Table Name |
The short text describes the object sufficiently |
|
336 |
406 |
Enter Field Name |
The short text describes the object sufficiently |
|
337 |
407 |
No System Types are available. Setup the master data |
The short text describes the object sufficiently |
|
338 |
408 |
Rule Criteria already exists. Select different name |
The short text describes the object sufficiently |
|
339 |
409 |
Rule Criteria &1 is not existed in the system |
The short text describes the object sufficiently |
|
340 |
410 |
Data '&1' is required |
The short text describes the object sufficiently |
|
341 |
411 |
Rule Criteria &1 is referenced by script and cannot be deleted |
The short text describes the object sufficiently |
|
342 |
412 |
Rule Criteria &1 is referenced by OLSP and cannot be deleted |
The short text describes the object sufficiently |
|
343 |
413 |
Table Name &1 is not existed |
The short text describes the object sufficiently |
|
344 |
414 |
Field Name &1 is not existed |
The short text describes the object sufficiently |
|
345 |
415 |
Invalid Connector for system type '&' |
The short text describes the object sufficiently |
|
346 |
416 |
All Query records will be retrieved for analysis |
The short text describes the object sufficiently |
|
347 |
417 |
Rule Script '&' created - All records will be retrieved for analysis |
The short text describes the object sufficiently |
|
348 |
418 |
Rule Script '&' updated - All records will be retrieved for analysis |
The short text describes the object sufficiently |
|
349 |
419 |
All Transaction records will be retrieved for analysis |
The short text describes the object sufficiently |
|
350 |
420 |
Enter filter value for all parameters |
The short text describes the object sufficiently |
|
351 |
421 |
Do you want to add Script Primary Connector '&' and update Rule Status ? |
The short text describes the object sufficiently |
|
352 |
423 |
Rule Status cannot be 'Released' - Script does not have a connector |
The short text describes the object sufficiently |
|
353 |
500 |
*********** Org. Level System Parameters *********** |
The short text describes the object sufficiently |
|
354 |
501 |
Select system connector to add parameters |
The short text describes the object sufficiently |
|
355 |
502 |
Low value should be Less than High Value in chronological order |
The short text describes the object sufficiently |
|
356 |
503 |
Select Rule Criteria value |
The short text describes the object sufficiently |
|
357 |
504 |
Select Operator value |
The short text describes the object sufficiently |
|
358 |
505 |
For BETWEEN operator Low and High Values should be selected |
The short text describes the object sufficiently |
|
359 |
506 |
For INCLUDE operator Low value should be selected |
The short text describes the object sufficiently |
|
360 |
507 |
For EXCLUDE operator Low value should be selected |
The short text describes the object sufficiently |
|
361 |
508 |
For INCLUDE operator High value should not be selected |
The short text describes the object sufficiently |
|
362 |
509 |
For EXCLUDE operator High value should be not selected |
The short text describes the object sufficiently |
|
363 |
510 |
For '&' operator Low value should be selected |
The short text describes the object sufficiently |
|
364 |
511 |
Created successfully |
The short text describes the object sufficiently |
|
365 |
512 |
Updated successfully |
The short text describes the object sufficiently |
|
366 |
513 |
Deleted successfully |
The short text describes the object sufficiently |
|
367 |
514 |
Save failed |
The short text describes the object sufficiently |
|
368 |
515 |
Delete failed |
The short text describes the object sufficiently |
|
369 |
516 |
Enter name value |
The short text describes the object sufficiently |
|
370 |
517 |
Enter Description value |
The short text describes the object sufficiently |
|
371 |
518 |
Add system connector(s) |
The short text describes the object sufficiently |
|
372 |
519 |
Select Rule Criteria |
The short text describes the object sufficiently |
|
373 |
520 |
Select operator value |
The short text describes the object sufficiently |
|
374 |
521 |
For INCLUDE operator enter either Low or High value for Rule Criteria & |
The short text describes the object sufficiently |
|
375 |
522 |
For BETWEEN operator enter both Low and High value for Rule Criteria & |
The short text describes the object sufficiently |
|
376 |
523 |
For EXCLUDE operator enter either Low or High value for Rule Criteria & |
The short text describes the object sufficiently |
|
377 |
524 |
EXCLUDE operator should have at least one Between operator & |
The short text describes the object sufficiently |
|
378 |
525 |
Add at least one system type data |
The short text describes the object sufficiently |
|
379 |
526 |
& record created by another user and its locked |
The short text describes the object sufficiently |
|
380 |
527 |
Cannot delete &, record already locked by other user |
The short text describes the object sufficiently |
|
381 |
528 |
Cannot delete &, record already in use by & organization |
The short text describes the object sufficiently |
|
382 |
529 |
& record already in used and locked by another user |
The short text describes the object sufficiently |
|
383 |
530 |
Select valid Rule Criteria |
The short text describes the object sufficiently |
|
384 |
531 |
Duplicate Entries found for the given connector |
The short text describes the object sufficiently |
|
385 |
532 |
Overlapping Entries found for the given connector |
The short text describes the object sufficiently |
|
386 |
533 |
Overlapping with the Between Operator Values for the given connector |
The short text describes the object sufficiently |
|
387 |
534 |
EXCLUDE Value should fall between operator values for the same connector |
The short text describes the object sufficiently |
|
388 |
535 |
Invalid Value / Matching value not found for Low |
The short text describes the object sufficiently |
|
389 |
536 |
Invalid Value / Matching value not found for High |
The short text describes the object sufficiently |
|
390 |
537 |
No authority on connector & |
The short text describes the object sufficiently |
|
391 |
538 |
For '&' Operator High value should not be selected |
The short text describes the object sufficiently |
|
392 |
539 |
For '&' Operator Low and High Values should be selected |
The short text describes the object sufficiently |
|
393 |
540 |
Org. Level System Parameters already exists |
The short text describes the object sufficiently |
|
394 |
541 |
The Entered Value '&' Is Not on the List of Valid Values |
The short text describes the object sufficiently |
|
395 |
542 |
None of connector is authorized |
The short text describes the object sufficiently |
|
396 |
560 |
Variant &1 is invalid |
The short text describes the object sufficiently |
|
397 |
600 |
*********** Scheduler *********** |
The short text describes the object sufficiently |
|
398 |
601 |
Job contains invalid job data, see SYSLOG |
The short text describes the object sufficiently |
|
399 |
602 |
Job name not specified |
The short text describes the object sufficiently |
|
400 |
603 |
Cannot start the job immediately |
The short text describes the object sufficiently |
|
401 |
604 |
Start Condition is invalid |
The short text describes the object sufficiently |
|
402 |
605 |
Job name missing (wildcards allowed) |
The short text describes the object sufficiently |
|
403 |
606 |
Error during JOB_CLOSE, see SYSLOG |
The short text describes the object sufficiently |
|
404 |
607 |
Job specified does not contain any steps |
The short text describes the object sufficiently |
|
405 |
608 |
Specified job does not exist |
The short text describes the object sufficiently |
|
406 |
609 |
Lock attempt failed |
The short text describes the object sufficiently |
|
407 |
610 |
Target Server or Group is invalid |
The short text describes the object sufficiently |
|
408 |
611 |
Incorrect entries for archive or archive objects |
The short text describes the object sufficiently |
|
409 |
612 |
No longer used |
The short text describes the object sufficiently |
|
410 |
613 |
No running info found |
The short text describes the object sufficiently |
|
411 |
614 |
Insert job log failed |
The short text describes the object sufficiently |
|
412 |
615 |
System failure & & |
The short text describes the object sufficiently |
|
413 |
616 |
Communication failure & & |
The short text describes the object sufficiently |
|
414 |
617 |
Update Scheduler log failed |
The short text describes the object sufficiently |
|
415 |
618 |
Job & cannot be created, see system log |
The short text describes the object sufficiently |
|
416 |
619 |
Invalid max rows: & |
The short text describes the object sufficiently |
|
417 |
620 |
Message not found |
The short text describes the object sufficiently |
|
418 |
621 |
Script not found & |
The short text describes the object sufficiently |
|
419 |
622 |
Unable to create document |
The short text describes the object sufficiently |
|
420 |
623 |
Schedule Log updated |
The short text describes the object sufficiently |
|
421 |
624 |
Cannot read job log |
The short text describes the object sufficiently |
|
422 |
625 |
Job count missing |
The short text describes the object sufficiently |
|
423 |
626 |
Job log not found in TemSe Database |
The short text describes the object sufficiently |
|
424 |
627 |
Job log is empty |
The short text describes the object sufficiently |
|
425 |
628 |
Job name missing |
The short text describes the object sufficiently |
|
426 |
629 |
Job name not specified |
The short text describes the object sufficiently |
|
427 |
630 |
Job already deleted |
The short text describes the object sufficiently |
|
428 |
631 |
Next job entry not found |
The short text describes the object sufficiently |
|
429 |
632 |
Unable to send the job to & |
The short text describes the object sufficiently |
|
430 |
633 |
Unknown system type |
The short text describes the object sufficiently |
|
431 |
634 |
Return connector not found & |
The short text describes the object sufficiently |
|
432 |
635 |
Connector not found |
The short text describes the object sufficiently |
|
433 |
636 |
Control Rule Assignment not found |
The short text describes the object sufficiently |
|
434 |
637 |
Job has been scheduled for selected Control Rule and time frame |
The short text describes the object sufficiently |
|
435 |
638 |
Job not found, connector:& |
The short text describes the object sufficiently |
|
436 |
639 |
Job log not found |
The short text describes the object sufficiently |
|
437 |
640 |
Job canceled & & & |
The short text describes the object sufficiently |
|
438 |
641 |
Job is in progress |
The short text describes the object sufficiently |
|
439 |
642 |
Nothing selected |
The short text describes the object sufficiently |
|
440 |
643 |
Test Period To is the past, the job will start immediately |
The short text describes the object sufficiently |
|
441 |
644 |
Test Period From is in the future, schedule the job with date and time |
The short text describes the object sufficiently |
|
442 |
645 |
Test Period From is the past, the job will start immediately |
The short text describes the object sufficiently |
|
443 |
646 |
Test Period From & To is in the past, the job will start immediately |
The short text describes the object sufficiently |
|
444 |
647 |
Job detail is not applicable |
The short text describes the object sufficiently |
|
445 |
648 |
Job status is not applicable |
The short text describes the object sufficiently |
|
446 |
649 |
Control Rule already selected |
The short text describes the object sufficiently |
|
447 |
650 |
Field '&1' is mandatory |
The short text describes the object sufficiently |
|
448 |
651 |
Control is empty; select at least one control |
The short text describes the object sufficiently |
|
449 |
652 |
Job & has been scheduled |
The short text describes the object sufficiently |
|
450 |
653 |
No test exection document existed |
The short text describes the object sufficiently |
|
451 |
654 |
Script type not supported |
The short text describes the object sufficiently |
|
452 |
655 |
Invalid Rule Status |
The short text describes the object sufficiently |
|
453 |
656 |
&1 Job Step status 'In progress' cancelled |
The short text describes the object sufficiently |
|
454 |
657 |
Job rescheduled: & |
The short text describes the object sufficiently |
|
455 |
658 |
Test Period From/To must be set inside the valid time frame |
The short text describes the object sufficiently |
|
456 |
659 |
Test Period To must greater than or equal to Test Period From |
The short text describes the object sufficiently |
|
457 |
660 |
Job canceled |
The short text describes the object sufficiently |
|
458 |
661 |
Event scheduling cannot be deleted |
The short text describes the object sufficiently |
|
459 |
662 |
Time frame not found |
The short text describes the object sufficiently |
|
460 |
663 |
Job log cannot be deleted |
The short text describes the object sufficiently |
|
461 |
664 |
Job steps cannot be deleted |
The short text describes the object sufficiently |
|
462 |
665 |
Deadline scheduling cannot be deleted |
The short text describes the object sufficiently |
|
463 |
666 |
Test period date is invalid |
The short text describes the object sufficiently |
|
464 |
667 |
Connector for BFC Web Service is initial |
The short text describes the object sufficiently |
|
465 |
668 |
Unable to update Job Step: Job ID &1 |
The short text describes the object sufficiently |
|
466 |
669 |
|
The short text describes the object sufficiently |
|
467 |
670 |
|
The short text describes the object sufficiently |
|
468 |
671 |
|
The short text describes the object sufficiently |
|
469 |
672 |
COMMIT WORK failed |
The short text describes the object sufficiently |
|
470 |
673 |
Job ID number was not specified |
The short text describes the object sufficiently |
|
471 |
674 |
Job name not specified |
The short text describes the object sufficiently |
|
472 |
675 |
Job does not exist |
The short text describes the object sufficiently |
|
473 |
676 |
Job already active |
The short text describes the object sufficiently |
|
474 |
677 |
No authorization to delete jobs |
The short text describes the object sufficiently |
|
475 |
678 |
Web service call to Access Control failed |
The short text describes the object sufficiently |
|
476 |
679 |
Job status not found for selected job |
The short text describes the object sufficiently |
|
477 |
680 |
Job cannot be canceled; see log display |
The short text describes the object sufficiently |
|
478 |
681 |
No document exists |
The short text describes the object sufficiently |
|
479 |
682 |
No header information for control result |
The short text describes the object sufficiently |
|
480 |
683 |
No detail for control result |
The short text describes the object sufficiently |
|
481 |
684 |
Test log & updated |
The short text describes the object sufficiently |
|
482 |
685 |
Issue & created |
The short text describes the object sufficiently |
|
483 |
686 |
Test log & created |
The short text describes the object sufficiently |
|
484 |
687 |
Status & set for test log & |
The short text describes the object sufficiently |
|
485 |
688 |
Workflow created for test log & |
The short text describes the object sufficiently |
|
486 |
689 |
Job ID created: & |
The short text describes the object sufficiently |
|
487 |
690 |
Routine & was executed |
The short text describes the object sufficiently |
|
488 |
691 |
Job aborted: & |
The short text describes the object sufficiently |
|
489 |
692 |
No detail for selected job |
The short text describes the object sufficiently |
|
490 |
693 |
RFC user not found, connector: & |
The short text describes the object sufficiently |
|
491 |
694 |
Execute query failed, job name: & |
The short text describes the object sufficiently |
|
492 |
695 |
Query executed, job name: & |
The short text describes the object sufficiently |
|
493 |
696 |
Time frame & not configured |
The short text describes the object sufficiently |
|
494 |
697 |
Connector for CC Web Service is initial |
The short text describes the object sufficiently |
|
495 |
698 |
Invalid Frequency for seleected time frame: & & |
The short text describes the object sufficiently |
|
496 |
699 |
& & & & |
The short text describes the object sufficiently |
|
497 |
700 |
Risk Analysis for user & failed |
The short text describes the object sufficiently |
|
498 |
701 |
Logical port for system type & Web Service & connector & not found |
The short text describes the object sufficiently |
|
499 |
702 |
No existing test log found; create test log |
The short text describes the object sufficiently |
|
500 |
703 |
After Do Action call for new test log |
The short text describes the object sufficiently |
|
501 |
704 |
After the saving of the new case & |
The short text describes the object sufficiently |
|
502 |
705 |
Before the first call to retrieve test log |
The short text describes the object sufficiently |
|
503 |
706 |
Return code after test log retrieval & |
The short text describes the object sufficiently |
|
504 |
707 |
Repeat call to test log retrieval |
The short text describes the object sufficiently |
|
505 |
708 |
Test log & from planner is found |
The short text describes the object sufficiently |
|
506 |
709 |
Job step &, no deficiency &, no issue & |
The short text describes the object sufficiently |
|
507 |
710 |
Retrieve test log & to create workflow |
The short text describes the object sufficiently |
|
508 |
711 |
Before submit test log & test automation & category & |
The short text describes the object sufficiently |
|
509 |
712 |
Before trigger workflow for test log & |
The short text describes the object sufficiently |
|
510 |
713 |
External Job ID & |
The short text describes the object sufficiently |
|
511 |
714 |
No authorization on connector '&' to view the issue details |
The short text describes the object sufficiently |
|
512 |
715 |
No data found |
The short text describes the object sufficiently |
|
513 |
716 |
Test log locked |
The short text describes the object sufficiently |
|
514 |
717 |
Lock table GRPCJOBCASE, try no. & |
The short text describes the object sufficiently |
|
515 |
718 |
Lock table GRPCJOBCASE failed, try no. & return code & |
The short text describes the object sufficiently |
|
516 |
719 |
Lock table GRPCJOBCASE success, try no. & |
The short text describes the object sufficiently |
|
517 |
720 |
Status & set for test log & test automation & category & |
The short text describes the object sufficiently |
|
518 |
721 |
Job step &, Deficiency & |
The short text describes the object sufficiently |
|
519 |
750 |
*********** Log Report ********* |
The short text describes the object sufficiently |
|
520 |
751 |
Add 'Rule Criteria' to rule parameter |
The short text describes the object sufficiently |
|
521 |
752 |
Delete 'Rule Criteria' from rule parameter |
The short text describes the object sufficiently |
|
522 |
753 |
Add 'Filter Rule Criteria' to rule parameter |
The short text describes the object sufficiently |
|
523 |
754 |
Delete 'Filter Rule Criteria' from rule parameter |
The short text describes the object sufficiently |
|
524 |
755 |
Add '&' to rule criteria '&' |
The short text describes the object sufficiently |
|
525 |
756 |
Delete '&' from rule criteria '&' |
The short text describes the object sufficiently |
|
526 |
757 |
Modify '&' on rule criteria '&' |
The short text describes the object sufficiently |
|
527 |
758 |
New |
The short text describes the object sufficiently |
|
528 |
759 |
Modify |
The short text describes the object sufficiently |
|
529 |
760 |
Delete |
The short text describes the object sufficiently |
|
530 |
800 |
*********** General Messages *********** |
The short text describes the object sufficiently |
|
531 |
801 |
System type & can have only one default target connector |
The short text describes the object sufficiently |
|
532 |
802 |
You do not have edit access so the window is in display mode |
The short text describes the object sufficiently |
|
533 |
803 |
Select a line |
The short text describes the object sufficiently |
|
534 |
850 |
*********** Job monitor *********** |
The short text describes the object sufficiently |
|
535 |
851 |
No data found for job '&1' |
The short text describes the object sufficiently |
|