SAP ABAP Message Class EL (IS-U meter reading data processing)

Basic Data

Hierarchy

☛ IS-UT (Software Component) SAP Utilities/Telecommunication
   ⤷ IS-U-DM-MR (Application Component) Meter Reading
     ⤷ EE17 (Package) IS-U: Meter Reading Data Entry

Attributes

Message class	EL
Short Description	IS-U meter reading data processing
Changed On	20130531
Last Changed At	121237

Messages

#	Message	Message Short Text	Documentation status	Authorization check
1	001	Enter clerk, meter reading unit or device	Space: object requires documentation	☐
2	002	Register is ignored when you enter a meter reading unit	Space: object requires documentation	☐
3	003	No entries have been made for the object selected	Space: object requires documentation	☐
4	004	&1 &2 does not have status &3		☐
5	005	Meter reading unit & does not exist		☐
6	006	No installation has been allocated to contract &1 on &2	Space: object requires documentation	☐
7	007	Enter a meter reading unit	Space: object requires documentation	☐
8	008	Contract & does not exist		☐
9	009	Enter a contract	Space: object requires documentation	☐
10	010	Order creation completed for meter reading unit &1 on &2	Space: object requires documentation	☐
11	011	MR/billing order already created for device &1 for other MR reason	Space: object requires documentation	☐
12	012	The &1 from &2 to &3 will be closed automatically	Space: object requires documentation	☐
13	013	Enter a device	Space: object requires documentation	☐
14	014	Total of the weightings for weighting key: &1: &2		☐
15	015	Device &1 &2 does not exist	Space: object requires documentation	☐
16	016	Valid from-date &1 may not be before date &2 of the last meter reading		☐
17	017	Meter reader &1 does not exist	Space: object requires documentation	☐
18	018	Meter reading reason is not permitted		☐
19	019	No orders created for meter reading unit &1 on &2 for &3	Space: object requires documentation	☐
20	020	Meter reading document &1 has no meter reading status		☐
21	021	Periods for weighting key &1 are correct		☐
22	022	For &1 &2 no &3 (&4) exists		☐
23	023	The scheduled MR cat. is not valid for dev. &1 with reg. &2 in inst. &3	Space: object requires documentation	☐
24	024	MR order is created internally upon entry of scheduled MR date	Space: object requires documentation	☐
25	025	The meter reading data was successfully reversed	Space: object requires documentation	☐
26	026	&1: dev. &2 and register &3 has been read by customer more than &4 times	Space: object requires documentation	☐
27	027	Device &1 is not installed in an installation	Space: object requires documentation	☐
28	028	No meter reading order can be allocated to the meter reading result	Space: object requires documentation	☐
29	029	Enter an installation	Space: object requires documentation	☐
30	030	&1: Overflow for device &2 reg. &3: Current MR lower than previous MR	Space: object requires documentation	☐
31	031	An internal error has occurred during selection of a contract	Space: object requires documentation	☐
32	032	Customer & has no contracts	Space: object requires documentation	☐
33	033	Orders already exist for regs installation &1 for meter reading reason &2	Space: object requires documentation	☐
34	034	Device & is already installed. Meter reading result already entered	Space: object requires documentation	☐
35	035	There are no meter reading documents for processing		☐
36	036	Selection invalid. Please enter selection criteria	Space: object requires documentation	☐
37	037	Only meter reading orders for inst./removal can be created for device &	Space: object requires documentation	☐
38	038	Reversal is not possible for the selected entry		☐
39	039	A billing document already exists on date &		☐
40	040	The number of results expected must be at least 1	Space: object requires documentation	☐
41	041	Device & is not valid on the date specified	Space: object requires documentation	☐
42	042	&1 billing orders were selected for billing	Space: object requires documentation	☐
43	043	Device &1 MR date &2: Meter reading from &3 is still implausible	Space: object requires documentation	☐
44	044	Position your cursor on one of the following fields: &1 &2 &3 &4	Space: object requires documentation	☐
45	045	No MR orders exist; Choose enter to create orders internally	Space: object requires documentation	☐
46	046	No meter reading orders created for contract &1 for meter reading date &2	Space: object requires documentation	☐
47	047	Allocation period is too far in the future	Space: object requires documentation	☐
48	048	Allocation period is too early		☐
49	049	Division & in company code & is not in table TE001		☐
50	050	Enter a gas date in portion record of meter reading unit &1	Space: object requires documentation	☐
51	051	No entries were selected		☐
52	052	No meter reading orders created for installation &1	Space: object requires documentation	☐
53	053	Enter the entry number	Space: object requires documentation	☐
54	054	No meter reading unit specified		☐
55	055	Specify a meter reading or a note for the entry no.	Space: object requires documentation	☐
56	056	Entry number was changed; result will be updated	Space: object requires documentation	☐
57	057	Meter reading start date is earlier than current date		☐
58	058	Billing start date is earlier than current date		☐
59	059	Billing start occurs before meter reading start		☐
60	060	A meter reading result already exists for entry number &1		☐
61	061	An error occurred during selection of meter reading order	Space: object requires documentation	☐
62	062	Search is only possible for meter reading order creation	Space: object requires documentation	☐
63	063	Error reading screen help F4		☐
64	064	No meter reading order exists with entry number &1		☐
65	065	Meter reading orders created for contrat &	Space: object requires documentation	☐
66	066	Installation & is nonactive		☐
67	067	Order creation not permitted: contract is not allocated to installation	Space: object requires documentation	☐
68	068	Internal error: action &1 does not exist	Space: object requires documentation	☐
69	069	Device &1, register &2: Meter reading type &3 not permitted	Space: object requires documentation	☐
70	070	No meter reading orders exist: &1 orders and &2 billing order created	Space: object requires documentation	☐
71	071	Meter reading order suppressed for device & and register &	Space: object requires documentation	☐
72	072	For device & register & meter reading date & a & already exists		☐
73	073	&1: Device &2, MR date &3: Measured consumption is zero	Space: object requires documentation	☐
74	074	Specify a weighting key	Space: object requires documentation	☐
75	075	Division & (division category &) is not permitted		☐
76	076	Entry &1 &2 &3 &4: valid from consumption <> 0		☐
77	077	Entry &1 &2 &3 &4: valid to consumption <> 99.999.999.999.999.999		☐
78	078	Entry &1 &2 &3 &4: incomplete consumption intervals		☐
79	079	Consumption intervals are consistent		☐
80	080	Consumption intervals are not consistent	Space: object requires documentation	☐
81	081	Save data to enable summation	Space: object requires documentation	☐
82	082	Save data to enable period check	Space: object requires documentation	☐
83	083	Periods for weighting key &1 are not correct		☐
84	084	Select one field only for summation or period check		☐
85	085	Device &1 register &2: check number is incorrect		☐
86	086	Please enter meter reading or meter reading note for dev. &1, reg. &2	Space: object requires documentation	☐
87	087	Combination of parameters is incorrect	Space: object requires documentation	☐
88	088	Summation not possible in add mode		☐
89	089	Meter reading orders and/or billing orders created for installation &	Space: object requires documentation	☐
90	090	Meter reading orders created for device &	Space: object requires documentation	☐
91	091	Not possible to check period in add mode		☐
92	092	All periods are correct		☐
93	093	No rate type found for register &, device &	Space: object requires documentation	☐
94	094	Registers already entered in installation &1 for meter reading reason &2		☐
95	095	Enter a billing date	Space: object requires documentation	☐
96	096	Periods for weighting key &1, temperature area &2 are correct	Space: object requires documentation	☐
97	097	Entry missing for &1 for weighting key &2 and temperature area &3	Space: object requires documentation	☐
98	098	Entry 'February 29' not permitted		☐
99	099	Weighting key &1 not defined in table TE266	Space: object requires documentation	☐
100	100	Specify meter reading unit &1; &2 is allocated to it		☐
101	101	No street route exists for meter reading unit &1		☐
102	102	Devices were not reassigned; select nodes of meter reading unit &1	Space: object requires documentation	☐
103	103	Select device nodes before reassigning	Space: object requires documentation	☐
104	104	Reassign not possible because target node is also selected node		☐
105	105	Not all meter readings results have been entered	Space: object requires documentation	☐
106	106	Dev. &1, MR date &2: Deviation fr. previous MR > perm. deviat. fixed val.	Space: object requires documentation	☐
107	107	Devices deleted implicitly from street route		☐
108	108	Devices deleted implicitly for street route of meter reading unit &1		☐
109	109	Devices deleted implicitly for allocated meter reading unit &1		☐
110	110	Device &1 deleted implicitly from street route &2		☐
111	111	Device with LOGIKNR &1 no longer found in the system		☐
112	112	No weighting key found for device & register &		☐
113	113	Scheduled meter reading date is required for printing correction order	Space: object requires documentation	☐
114	114	Device &1 reg. &2: MR result already plausible. Correction not possible.		☐
115	115	You cannot enter the scheduled meter reading date	Space: object requires documentation	☐
116	116	Error calculating reference consumption for device & register &		☐
117	117	Proration in FM &1 is after start of proration interval	Space: object requires documentation	☐
118	118	End of proration interval in FM &1 must be earlier than start of interval	Space: object requires documentation	☐
119	119	Transfer parameters missing in FM &1; proration not possible		☐
120	120	Select the meter reading result to be corrected	Space: object requires documentation	☐
121	121	Select only implausible meter reading results	Space: object requires documentation	☐
122	122	No period from previous year could be determined during extrapolation	Space: object requires documentation	☐
123	123	The meter readings selected have different scheduled meter reading dates	Space: object requires documentation	☐
124	124	No validation could be determined for device &1 register &2		☐
125	125	Dev. &1 reg. &2 is not allocated to an installat. on &3. No rate determ.		☐
126	126	Error occurred during pressure correction order for device &1		☐
127	127	Error occurred while reading contract for installation &1	Space: object requires documentation	☐
128	128	Schedule &1 of the last time slice = &2 &3	Space: object requires documentation	☐
129	129	Device &1 register &2: MR result already plausible. Release not advisable	Space: object requires documentation	☐
130	130	Select at least one entry for estimation	Space: object requires documentation	☐
131	131	&2 meter reading results were estimated for &1 meter reading orders		☐
132	132	Older MR orders and/or implausible previous meter reading results exist	Space: object requires documentation	☐
133	133	From- and to-status in FM &1 must be identical	Space: object requires documentation	☐
134	134	Old sequence does not agree with current sequence	Space: object requires documentation	☐
135	135	Logs will be deleted at next save		☐
136	136	Street route does not have to be changed because sequence &1 is empty		☐
137	137	Device &1 register &2: MR already correct in DB. Estimation not possible.		☐
138	138	Device &1 removed from sequence		☐
139	139	Device number old new, logic number old new		☐
140	140	Devices: &1 &2, logic number &3 &4		☐
141	141	In FM &1, from-consumption must be less than or equal to to-consumption	Space: object requires documentation	☐
142	142	Implausible prev. MR status for device &1, register &2. Release not poss.	Space: object requires documentation	☐
143	143	For period &1, consecutive no. &2, from-date must be before to-date	Space: object requires documentation	☐
144	144	The intervals for period &1 overlap	Space: object requires documentation	☐
145	145	&1 for installation &2 on &3, billing procedure &4 already exists		☐
146	146	No meter reading/billing orders created	Space: object requires documentation	☐
147	147	Installation & is inactive	Space: object requires documentation	☐
148	148	You must use the MR category from the schedule record	Space: object requires documentation	☐
149	149	Meter reading order creation canceled for & &	Space: object requires documentation	☐
150	150	Meter reading order creation canceled	Space: object requires documentation	☐
151	151	&1 device &2, MR date &3: &4 exceeds maximum tolerance limit	Space: object requires documentation	☐
152	152	&1: device &2, MR date &3: &4 below minimum tolerance limit	Space: object requires documentation	☐
153	153	Check class may still be used in rates		☐
154	154	Check group may still be used in rate categories or installation data		☐
155	155	Device &1 MR date &2: Maximum demand limit exceeded by &3 &4	Space: object requires documentation	☐
156	156	Error occurred during meter reading check for device &1 register &2		☐
157	157	No meter reading orders created for device &1	Space: object requires documentation	☐
158	158	Device &1 register &2: Falls below minimum demand limit by &3 &4	Space: object requires documentation	☐
159	159	Meter reading(s) released successfully. Choose save to exit	Space: object requires documentation	☐
160	160	&1: Device &2, MR date &3: Usage hours not within permissible interval	Space: object requires documentation	☐
161	161	Create weighting key with GEWVERF = '01' in table TE266	Space: object requires documentation	☐
162	162	No weighting key was allocated to operand &1	Space: object requires documentation	☐
163	163	Device &1 MR date &2: Number of usage hours exceeds maximum value	Space: object requires documentation	☐
164	164	Function module for printing meter reading docs was called incorrectly	Space: object requires documentation	☐
165	165	Scheduled meter reading date may not be in the past	Space: object requires documentation	☐
166	166	Allocate a weighting procedure to weighting key &1	Space: object requires documentation	☐
167	167	&1: Device &2 MR date &3: resetting entered by resetting reg. incorrect	Space: object requires documentation	☐
168	168	Specify a reference value for the rates	Space: object requires documentation	☐
169	169	Meter reading reason &1 not permissible	Space: object requires documentation	☐
170	170	Error accessing table TE609T for meter reading reason &1		☐
171	171	Error occurred during agent determination	Space: object requires documentation	☐
172	172	Dev. &1 reg. &2: validations successful. Meter readings will be released	Space: object requires documentation	☐
173	173	Meter reading reason '&1' not permissible	Space: object requires documentation	☐
174	174	No meter reading for device &1 register &2 due to meter reading interval		☐
175	175	Interval deadline! For device &1, register &2...		☐
176	176	Interval deadline! For device &1, register &2...		☐
177	177	No interval check carried out for device &1, register &2	Space: object requires documentation	☐
178	178	Device &1, reg. &2: Implausible previous MR results cannot be corrected	Space: object requires documentation	☐
179	179	Internal error: list of MR reasons cannot be called	Space: object requires documentation	☐
180	180	Fast entry: Selection in line &1 will be deleted	Space: object requires documentation	☐
181	181	Device &1, Reg. &2, MR date &3: Calculated MR result can not be changed	Space: object requires documentation	☐
182	182	Device &1, register &2: proration successful	Space: object requires documentation	☐
183	183	Scheduled meter reading date cannot be earlier than current date	Space: object requires documentation	☐
184	184	Dev.&1, reg.&2, MRdate &3: Impl. prev. MR rslts cannot be used f. estmtn	Space: object requires documentation	☐
185	185	Device &1 register &2: estimation could not determine a valid MR		☐
186	186	Reading for device &1, reg. &2 could not be calculated automatically	Space: object requires documentation	☐
187	187	Device &1 register &2: tol. limit val. without expctd consump. not poss.		☐
188	188	Device &1 register &2: printing corr. order for plausible MR not possible		☐
189	189	Interval period: For device &1, register &2	Space: object requires documentation	☐
190	190	Only use "no cover sheet" with "meter reading unit" and "print order"	Space: object requires documentation	☐
191	191	No meter reading for device &1 register &2 due to meter reading interval	Space: object requires documentation	☐
192	192	Use "Maintain History" to specify period consumption	Space: object requires documentation	☐
193	193	Changes to period consumpt. have effects on extrapolation/BB amount	Space: object requires documentation	☐
194	194	MR cat. is not unique: Installation &1 and &2 allocated to same device	Space: object requires documentation	☐
195	195	Meter reading reason &1 not permitted for reversal of MR result	Space: object requires documentation	☐
196	196	&1: Device &2, reg. &3: reading is not in any validity interval	Space: object requires documentation	☐
197	197	Inst. &1, device &2, register &3: Meter reading status &4 is invalid	Space: object requires documentation	☐
198	198	No contract exists for customer &1 on &2	Space: object requires documentation	☐
199	199	Enter numerical values only	Space: object requires documentation	☐
200	200	You must enter company code and division	Space: object requires documentation	☐
201	201	& is an invalid entry for temperature		☐
202	202	Error accessing table TE611 for meter reading reason &1	Space: object requires documentation	☐
203	203	Error accessing meter reading results of device &1, reg. &2	Space: object requires documentation	☐
204	204	Device &1, reg. &2, MR date &3 : MR date is before device installation	Space: object requires documentation	☐
205	205	Entry not possible for contract &1: see &2(&3)	Space: object requires documentation	☐
206	206	Device &1, reg. &2, date &3: reading cannot be determined automatically	Space: object requires documentation	☐
207	207	A reversal cannot be carried out with meter reading reason &	Space: object requires documentation	☐
208	208	Period key &1 in function module &2 could not be found	Space: object requires documentation	☐
209	209	The scheduled MR date is in a period that has already been billed	Space: object requires documentation	☐
210	210	No agent found	Space: object requires documentation	☐
211	211	Error reading the weekday calendar	Space: object requires documentation	☐
212	212	Meter reading orders already exist. Meter reading date will be ignored	Space: object requires documentation	☐
213	213	You have not specified scheduled MR cat. or use of MR cat. from sched.	Space: object requires documentation	☐
214	214	Meter readings in installation &1 have been entered for another MR reason	Space: object requires documentation	☐
215	215	Changes have been saved to the clipboard	Space: object requires documentation	☐
216	216	No meter reading orders to be estimated	Space: object requires documentation	☐
217	217	You cannot delete the time slice	Space: object requires documentation	☐
218	218	You cannot reverse billing orders reversed for adjustment	Space: object requires documentation	☐
219	219	Transaction has not been released = > inconsistencies possible	Space: object requires documentation	☐
220	220	At least one of the selected sched. recs has no scheduled MR cat.	Space: object requires documentation	☐
221	221	Device: &1, reg. &2 - implausible meter readings cannot be processed	Space: object requires documentation	☐
222	222	Transfer parameters &2 &3 missing in FM &1.	Space: object requires documentation	☐
223	223	&1 device &2, MR date &3: Estimated more than &4 times -> reset reading	Space: object requires documentation	☐
224	224	This value is not permissible: each time slice must be closed	Space: object requires documentation	☐
225	225	Error during extrapolation of device &1, register &2 in installation &3	Space: object requires documentation	☐
226	226	The contract is not allocated to the installation	Space: object requires documentation	☐
227	227	The last entry cannot be deleted	Space: object requires documentation	☐
228	228	MR/billing orders created/changed for &1 contracts and &2 installations	Space: object requires documentation	☐
229	229	Error accessing table TE610 for meter reading reason &1	Space: object requires documentation	☐
230	230	Indicator for SM order creation is not unique	Space: object requires documentation	☐
231	231	Validation class &1: permissible upper/lower limits cannot be determined	Space: object requires documentation	☐
232	232	&1 Device &2, MR date &3 estimated or read by customer more than &4 times	Space: object requires documentation	☐
233	233	Error during generation of meter reading orders	Space: object requires documentation	☐
234	234	Dev. &1, MR date &2: Enter all devs of an installation for same MR date	Space: object requires documentation	☐
235	235	Meter reading orders created successfully	Space: object requires documentation	☐
236	236	Device &1, MR date &2: MR results have already been entered for date &4	Space: object requires documentation	☐
237	237	Error during correction of plausible meter reading results	Space: object requires documentation	☐
238	238	Extrapolation terminated because no rate type exists for dev. &1, reg. &2	Space: object requires documentation	☐
239	239	No meter reading orders were created	Space: object requires documentation	☐
240	240	Rate &1 not found	Space: object requires documentation	☐
241	241	Rate &1 contains no operand	Space: object requires documentation	☐
242	242	MR group &1 inconsistent. Check transaction for MR group creation	Space: object requires documentation	☐
243	243	Error accessing table E109: No entries found for weighting &	Space: object requires documentation	☐
244	244	Inconsistency during maintenance of values for floating tolerance limits	Space: object requires documentation	☐
245	245	You cannot create meter reading orders internally for MR reason &1	Space: object requires documentation	☐
246	246	Installation &2 is allocated to MRU &3 on &1	Space: object requires documentation	☐
247	247	An incorrect weighting procedure has been allocated to the weighting key	Space: object requires documentation	☐
248	248	Installation &1 is blocked for meter reading for reason &2	Space: object requires documentation	☐
249	249	Contract & does not exist or has not been allocated to an installation	Space: object requires documentation	☐
250	250	&1 meter reading results have been imported into the system	Space: object requires documentation	☐
251	251	MR orders already created for device &1 on &2 for meter reading reason &3	Space: object requires documentation	☐
252	252	Error during determination of multiple meter reading orders	Space: object requires documentation	☐
253	253	Error during schedule record determination in extrapolation	Space: object requires documentation	☐
254	254	Device &1 reg. &2: Change MR type	Space: object requires documentation	☐
255	255	&1 of &2 meter reading orders were output	Space: object requires documentation	☐
256	256	Device &1: MR documents exist after activity date. Activity denied	Space: object requires documentation	☐
257	257	Device &1, register &2: correcting entry error not advisable	Space: object requires documentation	☐
258	258	Error during determination of weighting of base period	Space: object requires documentation	☐
259	259	Interval validation for final billing cannot be carried out	Space: object requires documentation	☐
260	260	Fixed validations are always carried out automatically: no entry required	Space: object requires documentation	☐
261	261	Error reading table internal TEASTS during extrapolation	Space: object requires documentation	☐
262	262	Error reading internal table &2 during extrapolation	Space: object requires documentation	☐
263	263	Device &1, register &2: no unique MR document determination possible	Space: object requires documentation	☐
264	264	Device &1, register &2: Incomplete MRs in dependent validation &3	Space: object requires documentation	☐
265	265	Dependent validation &1: Readings not complete	Space: object requires documentation	☐
266	266	Dependent validtion 02: Relative permissible deviation was exceeded	Space: object requires documentation	☐
267	267	Dependent validation 01: Absolute permissible deviation was exceeded	Space: object requires documentation	☐
268	268	Dependent validation 04: Result below permissible cosine phi of &1	Space: object requires documentation	☐
269	269	Dependent validation 05: Cosine phi not within tolerance limits	Space: object requires documentation	☐
270	270	SM order number assignment terminated during order creation	Space: object requires documentation	☐
271	271	Register allocation type &2 does not match validation group &1	Space: object requires documentation	☐
272	272	Dependent validation 06: Consumption ratio is outside of tolerance limit	Space: object requires documentation	☐
273	273	Dependent validation 07: Deviation in consumption ratio	Space: object requires documentation	☐
274	274	Extrapolation cannot be carried out because no inst. has been allocated	Space: object requires documentation	☐
275	275	&1 &2: Entry of meter readings not possible	Space: object requires documentation	☐
276	276	Dependent validation cannot be carried out for index no. &1, val. &2	Space: object requires documentation	☐
277	277	Device &1, register &2: Cannot use depend. val. 96 (fixed val. deviation)	Space: object requires documentation	☐
278	278	Double entries for same from-date are not permissible	Space: object requires documentation	☐
279	279	No schedule record found for alternate portion &1 of contract &2	Space: object requires documentation	☐
280	280	Validation point &1 does not match allocation type &2 of validation group	Space: object requires documentation	☐
281	281	Dep. val. 03: Secondary meter cons. is greater than prinary meter cons.	Space: object requires documentation	☐
282	282	Device &1, register &2: MR status &3 not permissible for action &4	Space: object requires documentation	☐
283	283	Entry of meter reading results not possible	Space: object requires documentation	☐
284	284	Error in device &1, register &2: See long text from previous line	Space: object requires documentation	☐
285	285	Not possible to display list with validations	Space: object requires documentation	☐
286	286	Dev. &1, reg. &2, MR date &3: Only enter estimation reason f. estimations	Space: object requires documentation	☐
287	287	&1 meter reading results were uploaded	Space: object requires documentation	☐
288	288	Meter reading results transferred:________ &1	Space: object requires documentation	☐
289	289	Of these: __ &1 plausible	Space: object requires documentation	☐
290	290	_______implausible results: &1	Space: object requires documentation	☐
291	291	Meter reading results not transferred:__&1	Space: object requires documentation	☐
292	292	Specify interval size or number of intervals	Space: object requires documentation	☐
293	293	Dev. &1, Reg. &2: Correction mode only possible for independent val.	Space: object requires documentation	☐
294	294	Determination of billing dimension on &1 not possible	Space: object requires documentation	☐
295	295	Installation & not available	Space: object requires documentation	☐
296	296	Device & does not exist	Space: object requires documentation	☐
297	297	Repeat reading order already already to be created for device &1	Space: object requires documentation	☐
298	298	Transfer table not maintained during period consumption determination	Space: object requires documentation	☐
299	299	Logical register number & does not exist	Space: object requires documentation	☐
300	300	Error occurred during interpolation	Space: object requires documentation	☐
301	301	No periodic consumption maintained for contract &1	Space: object requires documentation	☐
302	302	No metering device installed for &1 &2	Space: object requires documentation	☐
303	303	Time slice already exists with start date &1	Space: object requires documentation	☐
304	304	Release data after each change to a time slice	Space: object requires documentation	☐
305	305	You must specify a value between 0 and 366	Space: object requires documentation	☐
306	306	No register found for device &1 relevant to meter reading	Space: object requires documentation	☐
307	307	Dev. &1, reg. &2: No impl. MR result exists for repeat MR order from &3	Space: object requires documentation	☐
308	308	Only one entry permissible	Space: object requires documentation	☐
309	309	Dev. &1, reg. &2: Val. not possible because no rate type maintained on &3	Space: object requires documentation	☐
310	310	Device &1, reg. &2, MR date &3: MR date before dev. delivery or retiremnt	Space: object requires documentation	☐
311	311	Device &1, reg. &2. MR date &3: MR date is after device removal (&4)	Space: object requires documentation	☐
312	312	Internal: PREP_SAVE did not run	Space: object requires documentation	☐
313	313	Installation &1 is not in gas div.: You cannot maintain gas alloc. date	Space: object requires documentation	☐
314	314	No rate determined for device &1, register &2: Validation not possible	Space: object requires documentation	☐
315	315	Device &1, register &2: MR result must be released	Space: object requires documentation	☐
316	316	No card for meter reading by customer stored for device &1, register &2	Space: object requires documentation	☐
317	317	The billing order for installation &1 cannot be billed yet	Space: object requires documentation	☐
318	318	Meter reading results saved		☐
319	319	&3 % over-estimation factor used for device &1, register &2	Space: object requires documentation	☐
320	320	Input value contains invalid values (template: &)		☐
321	321	Input value & contains no digits (template: &)		☐
322	322	No rate determined for rate type &1, rate category &2	Space: object requires documentation	☐
323	323	Input value & contains more than one decimal point (template: &)		☐
324	324	& has too many places after decimal point (template: &)	Space: object requires documentation	☐
325	325	The maximum number of places before decimal point is 16		☐
326	326	& has too many digits (template: &)	Space: object requires documentation	☐
327	327	The maximum permitted number of places behind decimal point is 14		☐
328	328	Meter reading in database has too many pre-decimal places	Space: object requires documentation	☐
329	329	Meter reading in database has too many decimal places	Space: object requires documentation	☐
330	330	&1 has more than one dot (template: &2)	Space: object requires documentation	☐
331	331	Maintenance of weighting & in table TE109 is not permitted		☐
332	332	Specify meter reading control	Space: object requires documentation	☐
333	333	Reactivate billing order from &1 and billing transaction &2	Space: object requires documentation	☐
334	334	Device not allocated to installation on this date	Space: object requires documentation	☐
335	335	Error accessing meter reading orders for device &1, register &2	Space: object requires documentation	☐
336	336	Error accessing planning data of device &2, register &2	Space: object requires documentation	☐
337	337	Enter at least one validation code	Space: object requires documentation	☐
338	338	Check routine & has been defined more than once for the same entry		☐
339	339	No previous MR result exists for equipment &1 register &2	Space: object requires documentation	☐
340	340	No meter reading result exists for equipment &1 and register &2 in future		☐
341	341	Device &1, register &2, MR date &4: MR date is in the future	Space: object requires documentation	☐
342	342	Device &1, register &2, MR date &4: MR date is after scheduled MR date	Space: object requires documentation	☐
343	343	Tolerance factor 0 for &1, interval &2	Space: object requires documentation	☐
344	344	Meter reading orders still exist for the devices to be removed	Space: object requires documentation	☐
345	345	Cosine phi cannot be calculated for &1	Space: object requires documentation	☐
346	346	Device &1, register &2 estimated successfully	Space: object requires documentation	☐
347	347	Representativity check not possible for device &1, register &2	Space: object requires documentation	☐
348	348	Device &1, register &2: Independent validations not possible	Space: object requires documentation	☐
349	349	No entry possible for meter reading orders transferred: &1(&2)	Space: object requires documentation	☐
350	350	MR document numbers transferred do not exist	Space: object requires documentation	☐
351	351	Error during analysis of internal installation structure in action module	Space: object requires documentation	☐
352	352	Orders for MR by customer were created for MRU &1 on &2	Space: object requires documentation	☐
353	353	MR orders for estimation were created for MRU &1 on &2	Space: object requires documentation	☐
354	354	Meter reading orders already exist with the same meter reading reason	Space: object requires documentation	☐
355	355	Device &1, register &2: Format of MR &3 not valid (MR document number &4)	Space: object requires documentation	☐
356	356	An error occurred during upload of meter reading results	Space: object requires documentation	☐
357	357	Device &1, register &2: MR note &3 has not been stored	Space: object requires documentation	☐
358	358	Device &1, register &2: Error during determination due to MR note	Space: object requires documentation	☐
359	359	Device &1, register &2: Meter reading type &3 does not exist	Space: object requires documentation	☐
360	360	Error accessing schedule record of MRU &1	Space: object requires documentation	☐
361	361	Error during analysis of internal structure &1	Space: object requires documentation	☐
362	362	Meter reading documents exist for this installation	Space: object requires documentation	☐
363	363	MR doc no. &1, device &2, register &3: Format of date is invalid	Space: object requires documentation	☐
364	364	Automatic MR result monitoring completed successfully	Space: object requires documentation	☐
365	365	Installation &1: A meter reading result already exists for this device	Space: object requires documentation	☐
366	366	Final billing order &2 exists after removal date &1	Space: object requires documentation	☐
367	367	Dev. &1, reg. &2:operands have different units of meas. for billing	Space: object requires documentation	☐
368	368	No degree day coefficient entered on &1 with temp. area &2 in table TE403	Space: object requires documentation	☐
369	369	Order creation for final billing not possible	Space: object requires documentation	☐
370	370	No schedule record was found for MRU &1 after &2	Space: object requires documentation	☐
371	371	FM &1: prorated meter reading not in valid range	Space: object requires documentation	☐
372	372	No further parameters found	Space: object requires documentation	☐
373	373	Meter reading orders existing after removal are deleted automatically	Space: object requires documentation	☐
374	374	Enter a document category	Space: object requires documentation	☐
375	375	Enter a control level	Space: object requires documentation	☐
376	376	Billing order from &2 already exists for installation &1	Space: object requires documentation	☐
377	377	Suppression of billing is not advised	Space: object requires documentation	☐
378	378	Device &1, register &2: No device replacement on meter reading date &3	Space: object requires documentation	☐
379	379	Device &1, register &2: No schedule record found between &3 and &4	Space: object requires documentation	☐
380	380	Device &1, reg. &2, MR date &3: Estimation not poss.; maintain rate type	Space: object requires documentation	☐
381	381	MR reason 08 (technical installation) only possible at device level	Space: object requires documentation	☐
382	382	MR date for move-in reading of device &1 different from activity date	Space: object requires documentation	☐
383	383	Table TE935 (automatic MR data monitoring) has not been maintained	Space: object requires documentation	☐
384	384	The period consumption entered for register &1 is too low	Space: object requires documentation	☐
385	385	Billing of installation &1 will be suppressed	Space: object requires documentation	☐
386	386	Billing of installation &1 suppressed	Space: object requires documentation	☐
387	387	The value in the Active field in segment number &1 in not permitted	Space: object requires documentation	☐
388	388	Device &1, register &2: entry of replaced device on &3 not possible	Space: object requires documentation	☐
389	389	Error in access to table TE402 for allocation type &1	Space: object requires documentation	☐
390	390	Error accessing table TE406 for allocation type &1, operation code &2	Space: object requires documentation	☐
391	391	PM orders already open; you cannot create a new PM order	Space: object requires documentation	☐
392	392	Device &1: Meter reading result from technical inst. already entered	Space: object requires documentation	☐
393	393	&2 of &1 readings uploaded successfully	Space: object requires documentation	☐
394	394	A PM order will be created for device &1	Space: object requires documentation	☐
395	395	Installation &1 has not been allocated to a meter reading unit	Space: object requires documentation	☐
396	396	Creation of maintenance order for equipment &1 already scheduled	Space: object requires documentation	☐
397	397	Billable contracts: &1	Space: object requires documentation	☐
398	398	Data is inconsistent and could not be saved	Space: object requires documentation	☐
399	399	There are PM notifications open; you cannot create a new PM notification	Space: object requires documentation	☐
400	400	Entry number &1 is not unique	Space: object requires documentation	☐
401	401	MR &3 of &4 is lower than the entered MR for device &1 register &2	Space: object requires documentation	☐
402	402	Error accessing table TE438 for Meter Reading Type Control &1	Space: object requires documentation	☐
403	403	Error during upload of meter reading results: Data incomplete	Space: object requires documentation	☐
404	404	Meter reading category &1 invalid	Space: object requires documentation	☐
405	405	Define print parameters	Space: object requires documentation	☐
406	406	Correct the start date for period consumption validity	Space: object requires documentation	☐
407	407	Enter either the form class or the application form	Space: object requires documentation	☐
408	408	Enter a form group	Space: object requires documentation	☐
409	409	Meter readings could not be extrapolated for device &1 and register &2	Space: object requires documentation	☐
410	410	Enter period consumption	Space: object requires documentation	☐
411	411	No collective bill accounts found for the data entered	Space: object requires documentation	☐
412	412	Device &1 is allocated to at least two meter reading units	Space: object requires documentation	☐
413	413	No search criteria defined for division category &1 and billing class &2	Space: object requires documentation	☐
414	414	Device &1 and register &2: meter reading is in period already billed	Space: object requires documentation	☐
415	415	Estimation not advisable for device &1 and register &2	Space: object requires documentation	☐
416	416	Device &1 and register &2: Negative MR results not permitted	Space: object requires documentation	☐
417	417	Device &1 and code &2: No register found	Space: object requires documentation	☐
418	418	Register &2 does not exist for device &1 on &3	Space: object requires documentation	☐
419	419	Auto data for meter reading is entered incorrectly	Space: object requires documentation	☐
420	420	&1: Overflow dev. &2, reg. &3; MR results from &4 higher than inspection	Space: object requires documentation	☐
421	421	No register can be determined for logical PoD &1 register code &2	Space: object requires documentation	☐
422	422	Error in segment number &1	Space: object requires documentation	☐
423	423	Conversion ended because there is no rate type for device &1, register &2	Space: object requires documentation	☐
424	424	Device: &1 Reg. &2: Several meter readings with same meter reading time	Space: object requires documentation	☐
425	425	Device &1, MR date &2: Active indicator contains an invalid value	Space: object requires documentation	☐
426	426	Device &1 is already allocated to street route	The short text describes the object sufficiently	☐
427	427	Meter reading result for device &1 reg. &2 has been deleted	Space: object requires documentation	☐
428	428	Device &1, reg. &2: Meter reading not yet checked: Correction not poss.	Space: object requires documentation	☐
429	429	Upload meter readings: permitted number of 600 meter readings exceeded	Space: object requires documentation	☐
430	430	Meter reading order for device &1 reg. &2 has been deleted	Space: object requires documentation	☐
431	431	Reversal for &1 &2; planned meter reading date &3 started	Space: object requires documentation	☐
432	432	DPC ind. in billing for inst. &1 on &2; bllng proc. &3 chngd successfully	Space: object requires documentation	☐
433	433	Program for changing DPC indicator ended successfully	Space: object requires documentation	☐
434	434	Billing for installatn &1 on &2, billing proc. &3 alr. partially executed	Space: object requires documentation	☐
435	435	Download for selection parameter &1 from &2 to &3 has started	Space: object requires documentation	☐
436	436	Device &1, reg. &2; lock status differs from meter reading &4 from &3	Space: object requires documentation	☐
437	437	MR reason 08 not permitted for entries outside of transaction	Space: object requires documentation	☐
438	438	Device &1, reg. &2: Meter reading cannot be reset as it has been billed	Space: object requires documentation	☐
439	439	Installation not unique when entering a periodic MR within scope of DPC	Space: object requires documentation	☐
440	440	No relevant billing orders in period &1 to &2	Space: object requires documentation	☐
441	441	No billing orders in period &1 to &2	Space: object requires documentation	☐
442	442	Billing for installatn &1 on &2, billing proc. &3 alr. partially executed	Space: object requires documentation	☐
443	443	Calculation of actual deviation not possible	Space: object requires documentation	☐
444	444	Device &1, reg &2: Cannot change MR results because of backbilling	Space: object requires documentation	☐
445	445	On-site billing order creation already exists for installation &1 on &2	Space: object requires documentation	☐
446	446	Device &1, Reg. &2, MR date &3: MR time lies before device installation	Space: object requires documentation	☐
447	447	Device &1, reg. &2, MR date &4: MR time lies after device removal (&3)	Space: object requires documentation	☐
448	448	Enter a scheduled meter reading date	Space: object requires documentation	☐
449	449	No energy feeding volume entered in month &1 for weighting key &2	Space: object requires documentation	☐
450	450	Device &1, register &2, MR date &3: Specify a meter reading type	Space: object requires documentation	☐
451	451	Device &1, MR date &2: Date of maximum reading > actual MR date	Space: object requires documentation	☐
452	452	Device &1, reg. &2, MR date &3: MR date lies in an already billed period	Space: object requires documentation	☐
453	453	No energy feeding volume found on &1 for weighting key &2	Space: object requires documentation	☐
454	454	Enter an allocation date	Space: object requires documentation	☐
455	455	Schedule allocation date between &1 and &2	Space: object requires documentation	☐
456	456	Do not schedule meter reading allocation date after &1	Space: object requires documentation	☐
457	457	Device &1, MR date &2: MR date &3 not identical to scheduled MR date &4	Space: object requires documentation	☐
458	458	Device &1, register &2: Another MR unit is valid for this MR date	Space: object requires documentation	☐
459	459	Device &1, reg. &2, MR date &3: An MR result alr. exists for MR date &4	Space: object requires documentation	☐
460	460	Device &1, MR date &2: Date of maximum lies within a billed period	Space: object requires documentation	☐
461	461	Device &1, reg. &2: Cannot move meter reading within post-billing period	Space: object requires documentation	☐
462	462	Device &1, reg. &2: An MR order already exists for move-out date &3	Space: object requires documentation	☐
463	463	[DO NOT USE!!!]	Space: object requires documentation	☐
464	464	Subsequent MR result from &3 already estimated for device &1, reg. &2	Space: object requires documentation	☐
465	465	Enter note priority	Space: object requires documentation	☐
466	466	Placeholder missing in note text	Space: object requires documentation	☐
467	467	Future meter reading orders without unique allocation to an installation	Space: object requires documentation	☐
468	468	Device &1, Reg. &2: Enter all devices for an installation at same MR time	Space: object requires documentation	☐
469	469	Dev.&1, Reg.&2: MR time at move-in must be after MR time at move-out (&3)	Space: object requires documentation	☐
470	470	Dev.&1,Reg.&2: MR move-out time must be earlier than move-in MR time (&3)	Space: object requires documentation	☐
471	471	Device &1, Reg. &2: MR at move-in must be before MR at move-out (&3)	Space: object requires documentation	☐
472	472	Dev.&1,Reg.&2; MR time for move-out must be before MR time for move-in &3	Space: object requires documentation	☐
473	473	Device &1, Reg. &2: You cannot change the sequence of meter readings	Space: object requires documentation	☐
474	474	Device &1, register &2: MR results exist for time after device removal	Space: object requires documentation	☐
475	475	Device &1, register &2: MR results exist for time prior to device inst.	Space: object requires documentation	☐
476	476	Dev. &1, reg. &2: Installation must come after removal	Space: object requires documentation	☐
477	477	Dependent validations are ignored for index no. &1, validation &2	Space: object requires documentation	☐
478	478	Device &1 not installed in installation &3 on &2	Space: object requires documentation	☐
479	479	Device &1, reg. &2, MR date &3: Implausible MR lies in a billed period	Space: object requires documentation	☐
480	480	Meter reading order created for meter reading unit &1	Space: object requires documentation	☐
481	481	Internal error after calling BAdI 'ISU_MR_EABL_UPD'	Space: object requires documentation	☐
482	482	Meter reader &1 still used in schedule master record for MR unit &2	Space: object requires documentation	☐
483	483	You do not have authorization for &1 &2 (activity &3)	Space: object requires documentation	☐
484	484	You are not authorized to process the specified &1	Space: object requires documentation	☐
485	485	You do not have authorization for all transferred &2	Space: object requires documentation	☐
486	486	You cannot delete reversed billing orders of an installation group	Space: object requires documentation	☐
487	487	Device &1, reg. &2, MR date &: Interpolation of MR result not possible	Space: object requires documentation	☐
488	488	MR result/order already exists for device &1 on &2	Space: object requires documentation	☐
489	489	You cannot change the meter reading reason for device &1 on &2	Space: object requires documentation	☐
490	490	The first operand of the formula must be a profile	Space: object requires documentation	☐
491	491	You can only enter an operator or the delta character "&"	Space: object requires documentation	☐
492	492	Formula is incorrect and cannot be executed	Space: object requires documentation	☐
493	493	The formula cannot be executed as a profile is missing	Space: object requires documentation	☐
494	494	The formula cannot be executed as an operator is missing	Space: object requires documentation	☐
495	495	Function key not available	Space: object requires documentation	☐
496	496	You can only enter an operator or a profile	Space: object requires documentation	☐
497	497	The formula contains a profile that is not in the list	Space: object requires documentation	☐
498	498	First enter a formula	Space: object requires documentation	☐
499	499	A profile can only be used once as an operand in the formula	Space: object requires documentation	☐
500	500	You can only use a formula with the form "Operand Operator Operand"	Space: object requires documentation	☐
501	501	An error occurred calculating the new profile using addition	Space: object requires documentation	☐
502	502	An error occurred calculating the new profile using substraction	Space: object requires documentation	☐
503	503	Error in integral value creation for the new profile	Space: object requires documentation	☐
504	504	An error occurred calculating the new profile using multiplication	Space: object requires documentation	☐
505	505	Select the interpolated meter reading result for device &1	Space: object requires documentation	☐
506	506	Internal error: EABL with MR doc. no. &1 does not belong to billing order	Space: object requires documentation	☐
507	507	No meter reading results entered for primary installation (inst. group)	Space: object requires documentation	☐
508	508	Dev. &1, &2: Dev. repl. not permitted as serv. orders/notifications exist	Space: object requires documentation	☐
509	509	Dev. &1, Reg. &2, MRDate &3: Input val. has invalid values (template: &4)	Space: object requires documentation	☐
510	510	Dev.&1, MRDate &2: Input val. &3 has more than one comma (templ. &4)	Space: object requires documentation	☐
511	511	Dev.&1, MRDate &2: Input val. &3 has more than one dec. place (templ. &4)	Space: object requires documentation	☐
512	512	Dev. &1, MRDate &2: Input val. &3 has no characters (template &4)	Space: object requires documentation	☐
513	513	Dev. &1, MRdate &2: Input val. &3 has too many dec. places (template &4)	Space: object requires documentation	☐
514	514	Dev. &1, MRdate &2: Input val. &3 has too many characters (template &4)	Space: object requires documentation	☐
515	515	Installation &1: Billing order cannot be hidden due to reversal doc. no.	Space: object requires documentation	☐
516	516	Installation &1: Reversal document number copied to other billing order	Space: object requires documentation	☐
517	517	Device &1: Enter all registers of a device for the same MR date	Space: object requires documentation	☐
518	518	Do not regenerate suppressed order as it has already been billed	Space: object requires documentation	☐
519	519	Device &1 date &2: Service order/notification remains unchanged	Space: object requires documentation	☐
520	520	Device &1, Reg. &2: Actual meter reading results exist after MR date &3	The short text describes the object sufficiently	☐
521	521	&1 meter reading orders: Estimation not possible for implaus.prev.MR res.	The short text describes the object sufficiently	☐
522	522	You cannot create a control meter reading order for device &1	Space: object requires documentation	☐
523	523	Device &1 Reg. &2 MR date &3: No MR result or follow-up action	Space: object requires documentation	☐
524	524	Time variable meter readings cannot be included automatically	Space: object requires documentation	☐
525	525	Device &1 already has later time-variable MR docs. Process rejected	Space: object requires documentation	☐
526	526	Deletion of meter reading data is only possible using the 'Reset' button	The short text describes the object sufficiently	☐
527	528	A meter reading order already exists on &3 for device &1, register &2	The short text describes the object sufficiently	☐
528	529	The maximum number of days from table TE935 has been restricted to 999	Space: object requires documentation	☐
529	530	Cross-contract assessing not implemented for installation &1	The short text describes the object sufficiently	☐
530	531	Device &1, register &2: Meter reading orders exist in the past	Space: object requires documentation	☐
531	532	Form and MDE number cannot be entered together	Space: object requires documentation	☐
532	540	Month is not permitted	The short text describes the object sufficiently	☐
533	549	You cannot enter a billing date	Space: object requires documentation	☐
534	550	Dev. &1, Reg. &2, MR date &3: MR date lies before or after replacement	Space: object requires documentation	☐
535	562	Device &1 Register &2 MR Date &3: MR date cannot be changed	Space: object requires documentation	☐
536	563	Device &1, register &2: Meter readings cannot be entered on spec. MR date	The short text describes the object sufficiently	☐
537	565	Device &1: Meter reading documents exist from solving conflict cases	Space: object requires documentation	☐
538	575	Device &1: MR documents exist on transaction date. Transaction rejected	Space: object requires documentation	☐
539	576	&2 &3 locked by user &1; Remaining repeat attempts: &4	The short text describes the object sufficiently	☐
540	600	*** 600 to 649 reserved for mass changes to meter reading unit ***	Space: object requires documentation	☐
541	601	No meter reading units defined for parameter group &1	Space: object requires documentation	☐
542	602	Installation &1 now allocated to &3. No longer allocated to &2	Space: object requires documentation	☐
543	603	No installation found matching selection criteria	Space: object requires documentation	☐
544	604	Different portion (&2) defined for contract &1	Space: object requires documentation	☐
545	605	New meter reading unit &1 has portion &2. Old unit &3 has &4	Space: object requires documentation	☐
546	606	Connection object &1 is not allocated to regional structure	Space: object requires documentation	☐
547	607	Mass change to meter reading unit carried out for parameter group &1	Space: object requires documentation	☐
548	608	Meter reading unit changed in &1 installations	Space: object requires documentation	☐
549	609	Error found in &1 installations	Space: object requires documentation	☐
550	610	Dev. &1, reg. &2: Result cannot be estimated without previous result	Space: object requires documentation	☐
551	611	Device &1, register &2: Re-estimation not possible without future result	Space: object requires documentation	☐
552	612	&1 could not be re-esimated	Space: object requires documentation	☐
553	613	Parameter group &1 does not exist	Space: object requires documentation	☐
554	614	Portion in MR unit and alternative portion have different cycles	Space: object requires documentation	☐
555	650	Remove unnecessary device &1 from street route of meter reading unit &2	Space: object requires documentation	☐
556	651	Internal error: Cannot determine first device for meter reading unit &1	Space: object requires documentation	☐
557	652	Internal error: Successor &2 for device &3 and MR unit &1 is missing	Space: object requires documentation	☐
558	653	Transaction EABICO not permitted: Contract contains reg. relationships	The short text describes the object sufficiently	☐
559	676	The meter reading difference exceeds the capacity of the register	Space: object requires documentation	☐
560	677	The number of predeciamal places &1 is higher than permitted maximum &2		☐
561	678	Total of places before and after decimal point &1 can be a maximum of &2		☐
562	679	No. of predecimal places (&1) does not equal those of register group (&2)		☐
563	680	Number of decimal places &1 does not correspond to the reg. group &2	Space: object requires documentation	☐
564	689	Enter error or warning	Space: object requires documentation	☐
565	690	You must specify either an absolute deviation or a percentage deviation	Space: object requires documentation	☐
566	691	Cannot delete meter reading - reading at installation already entered	Space: object requires documentation	☐
567	700	Schedule records were moved to previous/next month	Space: object requires documentation	☐
568	701	No schedule records exist for reference &1 &2 in the specified period	Space: object requires documentation	☐
569	702	Enter interval and pos./neg. indicator for date together	Space: object requires documentation	☐
570	703	Scheduled meter reading date is before scheduled billing date	Space: object requires documentation	☐
571	704	Select "Dynamice scheduling active" field in Customizing	Space: object requires documentation	☐
572	705	No previous meter reading found for device &1, &2, MR date &3	The short text describes the object sufficiently	☐
573	706	"Change Subsequent Meter" indicator must be the same for all calls	Space: object requires documentation	☐
574	707	You can only change a portion once within a call	Space: object requires documentation	☐
575	708	Setup for dynamic period control for portion &1 or &2 is incorrect	Space: object requires documentation	☐
576	750	Enter meter reading unit, date and table with equipment numbers	Space: object requires documentation	☐
577	751	Device &1 (equipment &2) not installed	Space: object requires documentation	☐
578	752	Device &1 (equipment &2): MRU &3 <> &4 allocated	Space: object requires documentation	☐
579	753	You cannot allocated equipment &1 to the street route more than once	Space: object requires documentation	☐
580	754	Device &1 is not allocated to meter reading unit &2	Space: object requires documentation	☐
581	755	Meter reading reason &1 is not permitted for device info record	The short text describes the object sufficiently	☐
582	771	MR date and start of billing period must be the same	Space: object requires documentation	☐
583	786	For period category 'T' the maximum permitted value is '7'		☐
584	787	For period category T you must enter either time basis or weekday	Space: object requires documentation	☐
585	788	For period category M you must specify time basis 1,2,3,4,6 or 12	Space: object requires documentation	☐
586	791	Selection object not allocated to a meter reading unit		☐
587	792	Selection object is allocated to several meter reading units		☐
588	809	Do not enter billing date for &		☐
589	810	Do not enter scheduled meter reading date for &	Space: object requires documentation	☐
590	850	Meter reading documents were corrected	Space: object requires documentation	☐
591	851	Meter reading result(s) entered		☐
592	852	Expert mode activated	The short text describes the object sufficiently	☐
593	853	Expert mode deactivated	The short text describes the object sufficiently	☐
594	854	Extreme case handling has already taken place!	Space: object requires documentation	☐
595	855	One or more meter reading results already billed	Space: object requires documentation	☐
596	880	All selected consumption intervals are consistent		☐
597	881	Maximum upper limit & too low for &/&		☐
598	882	Overlap & - & interval for &/&		☐
599	883	Gap & - & consumption intervals for &/&		☐
600	884	Minimum lower limit & is too high for &/&	Space: object requires documentation	☐
601	885	Lower limit & higher than upper limit & for & / &		☐
602	890	No meter reading doc.exists for installation &3 for date &1 and reason &2		☐
603	891	No meter reading document exists for device &3 for date &1 and reason &2		☐
604	896	Internal error in FM &1	Space: object requires documentation	☐
605	897	Internal error in transfer parameters in form ISU_OPEN_	Space: object requires documentation	☐
606	898	Internal error occurred in transfer parameters in form &1		☐
607	899	Processing was terminated	Space: object requires documentation	☐
608	900	Device &1 cannot be processed	Space: object requires documentation	☐
609	960	No meter reading doc.exists for installation &3 for date &1 and reason &2		☐

History

Last changed on/by	20130531	SAP
SAP Release Created in