SAP ABAP Message Class EAML (EAML)
Basic Data
Hierarchy
☛
SAP_APPL (Software Component) Logistics and Accounting
⤷
PM-EQM (Application Component) Technical Objects
⤷
EAML (Package) EAM: Linear Feature Extension - unswitched
SAP_APPL (Software Component) Logistics and Accounting⤷
PM-EQM (Application Component) Technical Objects⤷
EAML (Package) EAM: Linear Feature Extension - unswitched 
Attributes
| Message class |  |
EAML |
| Short Description |  |
|
| Changed On |  |
20130531 |
| Last Changed At |  |
100617 |
Messages
| # | Message | Message Short Text | Documentation status | Authorization check |
|---|---|---|---|---|
| 1 |  001 |
Mandatory field &1 is not filled | The short text describes the object sufficiently | |
| 2 | 002 |
Enter only numeric values | The short text describes the object sufficiently | |
| 3 | 003 |
Enter unit of marker | The short text describes the object sufficiently | |
| 4 | 004 |
Offset type code &1 does not exist | The short text describes the object sufficiently | |
| 5 | 005 |
Technical object &1 does not exist | The short text describes the object sufficiently | |
| 6 | 006 |
Functional location &1 is not a linear asset | The short text describes the object sufficiently | |
| 7 | 007 |
Equipment &1 is not linear | The short text describes the object sufficiently | |
| 8 | 008 |
Enter a valid value as &1 | The short text describes the object sufficiently | |
| 9 | 009 |
Enter a numeric value as &1 | The short text describes the object sufficiently | |
| 10 | 010 |
Enter a value between &2 and &3 as &1 | The short text describes the object sufficiently | |
| 11 | 011 |
Enter a numeric value as end point | The short text describes the object sufficiently | |
| 12 | 012 |
Enter a numeric value as linear length | The short text describes the object sufficiently | |
| 13 | 013 |
Enter a valid unit of measurement for first offset | The short text describes the object sufficiently | |
| 14 | 014 |
Enter a valid unit of measurement for second offset | The short text describes the object sufficiently | |
| 15 | 015 |
Non-linear technical objects are deleted from selection | Space: object requires documentation | |
| 16 | 016 |
Select at least one technical object to be saved | The short text describes the object sufficiently | |
| 17 | 017 |
Technical object &1 is updated | The short text describes the object sufficiently | |
| 18 | 018 |
Mark at least one column from new values for mass changes | The short text describes the object sufficiently | |
| 19 | 019 |
Mark at least one technical object for applying changes | The short text describes the object sufficiently | |
| 20 | 020 |
No linear technical objects have been selected | The short text describes the object sufficiently | |
| 21 | 021 |
Technical object &1 is not changed | The short text describes the object sufficiently | |
| 22 | 022 |
Enter a numeric value as first offset | The short text describes the object sufficiently | |
| 23 | 023 |
Enter a numeric value as second offset | The short text describes the object sufficiently | |
| 24 | 024 |
Enter a numeric value as distance from start marker | The short text describes the object sufficiently | |
| 25 | 025 |
Enter a numeric value as distance from end marker | The short text describes the object sufficiently | |
| 26 | 026 |
Enter unit of measurement for distance data | The short text describes the object sufficiently | |
| 27 | 027 |
Enter offset type for first offset | The short text describes the object sufficiently | |
| 28 | 028 |
Enter offset type for second offset | The short text describes the object sufficiently | |
| 29 | 029 |
Length does not equal the distance between start point and end point | The short text describes the object sufficiently | |
| 30 | 030 |
Linear data fields are not available for non-linear technical objects | The short text describes the object sufficiently | |
| 31 | 031 |
BAdI for checking linear data detected a problem | The short text describes the object sufficiently | |
| 32 | 032 |
BAdI for checking linear data for a characteristic detected a problem | The short text describes the object sufficiently | |
| 33 | 033 |
Enter different offset types for first and second offset | The short text describes the object sufficiently | |
| 34 | 034 |
Choose only one offset type as the default for first or second offset | Space: object requires documentation | |
| 35 | 035 |
Enter a positive value for linear length | The short text describes the object sufficiently | |
| 36 | 040 |
Class type and object table is not a valid combination | Space: object requires documentation | |
| 37 | 041 |
Class type &1 object table &2 cannot be used for Linear Asset Management | Space: object requires documentation | |
| 38 | 050 |
Choose a characteristic and characteristic value first | The short text describes the object sufficiently | |
| 39 | 051 |
Errors in linear data for characteristics; saving aborted | The short text describes the object sufficiently | |
| 40 | 052 |
Enter the class type | The short text describes the object sufficiently | |
| 41 | 053 |
Enter the object table | The short text describes the object sufficiently | |
| 42 | 054 |
Only object table EQUI or IFLOT is allowed here | The short text describes the object sufficiently | |
| 43 | 060 |
No input help available | The short text describes the object sufficiently | |
| 44 | 061 |
If segment and start/end/length are filled, only segment is considered | The short text describes the object sufficiently | |
| 45 | 062 |
To select a segment, you must fill both the "from" and the "to" field | The short text describes the object sufficiently | |
| 46 | 063 |
Enter a valid unit of measurement | The short text describes the object sufficiently | |
| 47 | 064 |
You cannot select 'Outside Range': Segment values cannot be excluded | The short text describes the object sufficiently | |
| 48 | 065 |
IntervalBoundaryTypeCode = 3 is allowed for &1 | The short text describes the object sufficiently | |
| 49 | 066 |
Enter a valid TypeCode for Maintenance Request | The short text describes the object sufficiently | |
| 50 | 067 |
Enter a valid MaintenancePlanningPlantID for 'Maintenance Request' | The short text describes the object sufficiently | |
| 51 | 070 |
To display a graphic, select exactly one top-level object | The short text describes the object sufficiently | |
| 52 | 071 |
No object with linear data; graphic cannot be displayed | The short text describes the object sufficiently | |
| 53 | 072 |
Errors in graphics; inform your system administrator | The short text describes the object sufficiently | |
| 54 | 073 |
More than 99 objects; graphic cannot be displayed | The short text describes the object sufficiently | |
| 55 | 074 |
Value &1 of the &2 in object &3 cannot be converted | The short text describes the object sufficiently | |
| 56 | 075 |
Different UoMs; the graphic is displayed in UoM &1 of object &2 | The short text describes the object sufficiently | |
| 57 | 076 |
Graphic cannot be displayed; start points and end points are the same | Space: object requires documentation | |
| 58 | 080 |
The linear measuring point category cannot be changed to non-linear | Space: object requires documentation | |
| 59 | 098 |
Start marker &1 and distance do not match start point &2 &3 (LRP &4) | Space: object requires documentation | |
| 60 | 099 |
End marker &1 and distance do not match end point &2 &3 (LRP &4) | Space: object requires documentation | |
| 61 | 100 |
Enter a valid marker | The short text describes the object sufficiently | |
| 62 | 101 |
LRP &1 already exists | The short text describes the object sufficiently | |
| 63 | 102 |
LRP &1 saved successfully | The short text describes the object sufficiently | |
| 64 | 103 |
LRP &1 does not exist | The short text describes the object sufficiently | |
| 65 | 104 |
Reference LRP &1 does not exist | The short text describes the object sufficiently | |
| 66 | 105 |
Marker &1 has to lie within the reference object (&2 - &3 &4) | Space: object requires documentation | |
| 67 | 106 |
Marker check was executed successfully | The short text describes the object sufficiently | |
| 68 | 107 |
LRP &1 has been deleted | The short text describes the object sufficiently | |
| 69 | 108 |
Marker &1 already exists | The short text describes the object sufficiently | |
| 70 | 109 |
Enter unit of measurement for marker &1 | The short text describes the object sufficiently | |
| 71 | 110 |
Enter only numeric values for marker &1 | The short text describes the object sufficiently | |
| 72 | 111 |
Unit of measurement for marker &1 not valid | The short text describes the object sufficiently | |
| 73 | 112 |
Marker type for marker &1 not valid | The short text describes the object sufficiently | |
| 74 | 113 |
You are not authorized to display LRP &1 | The short text describes the object sufficiently | |
| 75 | 114 |
You are not authorized to change LRP &1 | The short text describes the object sufficiently | |
| 76 | 115 |
You are not authorized to create LRP &1 | The short text describes the object sufficiently | |
| 77 | 116 |
Function is not allowed for technical objects | The short text describes the object sufficiently | |
| 78 | 117 |
Input help only available for marker types E and F | The short text describes the object sufficiently | |
| 79 | 118 |
Input for element &1 too long | The short text describes the object sufficiently | |
| 80 | 119 |
Enter equal unit code for elements StartPoint, EndPoint and Length | The short text describes the object sufficiently | |
| 81 | 120 |
Field &1 is not contained in marker table | The short text describes the object sufficiently | |
| 82 | 121 |
Unit code &1 of linear information elements not equal to backend UoM | Space: object requires documentation | |
| 83 | 122 |
No linear reference pattern (LRP) found | The short text describes the object sufficiently | |
| 84 | 123 |
Enter a technical object for marker &1 | The short text describes the object sufficiently | |
| 85 | 124 |
Column &1 expected at position &2 | The short text describes the object sufficiently | |
| 86 | 125 |
Enter a marker type for marker &1 | The short text describes the object sufficiently | |
| 87 | 126 |
Mandatory field &1 not provided | The short text describes the object sufficiently | |
| 88 | 127 |
You are not allowed to upload markers of LRP &1 to LRP &2 | Space: object requires documentation | |
| 89 | 128 |
LRP &1 is still used in equipment &2 | The short text describes the object sufficiently | |
| 90 | 129 |
LRP &1 is still used in functional location &2 | The short text describes the object sufficiently | |
| 91 | 130 |
Superior object has been changed; linear data of &1 was deleted | The short text describes the object sufficiently | |
| 92 | 131 |
Close dialog boxes in Microsoft Excel before branching to Excel | The short text describes the object sufficiently | |
| 93 | 132 |
Enter a valid start marker for LRP &1 | The short text describes the object sufficiently | |
| 94 | 133 |
Enter a valid end marker for LRP &1 | The short text describes the object sufficiently | |
| 95 | 134 |
Master data of equipment &1 has different LRP &2 | Space: object requires documentation | |
| 96 | 135 |
Master data of functional location &1 has different LRP &2 | Space: object requires documentation | |
| 97 | 136 |
Linear data of marker &1 rounded according to Customizing setting | Space: object requires documentation | |
| 98 | 137 |
Deleted marker &1 is used in equipment &2 | Space: object requires documentation | |
| 99 | 138 |
Deleted marker &1 is used in functional location &2 | Space: object requires documentation | |
| 100 | 139 |
Superior object has been changed; linear data was copied from &1 | The short text describes the object sufficiently | |
| 101 | 140 |
Functional location &1 is inactive | The short text describes the object sufficiently | |
| 102 | 141 |
Functional location &1 is flagged for deletion | The short text describes the object sufficiently | |
| 103 | 142 |
Functional location &1 has a deletion flag | The short text describes the object sufficiently | |
| 104 | 143 |
Equipment &1 is inactive | The short text describes the object sufficiently | |
| 105 | 144 |
Equipment &1 is flagged for deletion | The short text describes the object sufficiently | |
| 106 | 145 |
Equipment &1 has a deletion flag | The short text describes the object sufficiently | |
| 107 | 146 |
Marker ID could not be changed | Space: object requires documentation | |
| 108 | 147 |
Enter the same unit code for elements StartPoint, EndPoint, and Segment | The short text describes the object sufficiently | |
| 109 | 148 |
LRP &1 is not assigned to object &2; marker fields are not copied | The short text describes the object sufficiently | |
| 110 | 150 |
LRP will be changed; there are still documents with LRP &1 | The short text describes the object sufficiently | |
| 111 | 151 |
LRP &1 does not exist; the corresponding marker fields are deleted | The short text describes the object sufficiently | |
| 112 | 152 |
LRP will be removed; there are still documents with LRP &1 | The short text describes the object sufficiently | |
| 113 | 153 |
LRP will be removed; the corresponding marker fields are deleted | The short text describes the object sufficiently | |
| 114 | 154 |
Marker &1 still used and cannot be deleted; see where-used list | The short text describes the object sufficiently | |
| 115 | 155 |
Marker &1 is used in &2 &3 | The short text describes the object sufficiently | |
| 116 | 156 |
Selected markers are not used | The short text describes the object sufficiently | |
| 117 | 198 |
No entry in field &1 allowed if link category is &2 | The short text describes the object sufficiently | |
| 118 | 199 |
Object link ID &1 is specified more than once | The short text describes the object sufficiently | |
| 119 | 200 |
Enter Network ID | The short text describes the object sufficiently | |
| 120 | 201 |
Network ID &1 does not exist | The short text describes the object sufficiently | |
| 121 | 202 |
Network ID &1 already exists | The short text describes the object sufficiently | |
| 122 | 203 |
Enter type of network | The short text describes the object sufficiently | |
| 123 | 204 |
Link category &1 not allowed. Only category &2 is allowed here. | The short text describes the object sufficiently | |
| 124 | 205 |
Enter &1. | The short text describes the object sufficiently | |
| 125 | 206 |
Network &1 saved successfully | The short text describes the object sufficiently | |
| 126 | 207 |
Network type &1 of network &2 not relevant for recording attrib. changes | The short text describes the object sufficiently | |
| 127 | 208 |
For network &1 no attribute values have been created | The short text describes the object sufficiently | |
| 128 | 209 |
Object link &1 is already assigned to network ID &2 | Space: object requires documentation | |
| 129 | 210 |
Status could not be changed for all marked object links | The short text describes the object sufficiently | |
| 130 | 211 |
Field &1 is not part of the field list of network attributes | The short text describes the object sufficiently | |
| 131 | 212 |
Enter record date in row &1 | The short text describes the object sufficiently | |
| 132 | 213 |
Deletion status has been set | The short text describes the object sufficiently | |
| 133 | 214 |
Deletion status has been reset | The short text describes the object sufficiently | |
| 134 | 215 |
You are not authorized to create attribute values for network &1 | The short text describes the object sufficiently | |
| 135 | 216 |
You are not authorized to change attribute values for network &1 | The short text describes the object sufficiently | |
| 136 | 217 |
You are not authorized to display attribute values for network &1 | The short text describes the object sufficiently | |
| 137 | 218 |
No temporary ID for attribute values has been provided in line &1 | The short text describes the object sufficiently | |
| 138 | 219 |
Temporary ID &1 for attribute values has been specified twice | The short text describes the object sufficiently | |
| 139 | 220 |
Network attribute &1 is not allowed for network &2 | The short text describes the object sufficiently | |
| 140 | 221 |
Attribute property &1 is not allowed for network &2 | The short text describes the object sufficiently | |
| 141 | 222 |
Maintain attribute properties for network attribute category &1 in IMG | The short text describes the object sufficiently | |
| 142 | 223 |
Network &1 cannot be deleted because it is a linear network | Space: object requires documentation | |
| 143 | 224 |
No linear data has been maintained in row &1 | The short text describes the object sufficiently | |
| 144 | 225 |
Maintain at least one attribute property in row &1 | The short text describes the object sufficiently | |
| 145 | 226 |
Data checked successfully | The short text describes the object sufficiently | |
| 146 | 227 |
Value &1 is not allowed for property &2 | The short text describes the object sufficiently | |
| 147 | 228 |
Exported network attribute values contain errors | The short text describes the object sufficiently | |
| 148 | 229 |
Use of special characters and/or blanks is not allowed | The short text describes the object sufficiently | |
| 149 | 230 |
You are not allowed to display network data | The short text describes the object sufficiently | |
| 150 | 231 |
You are not allowed to maintain network data | The short text describes the object sufficiently | |
| 151 | 232 |
Internal error during calculation of dynamic segmentation | The short text describes the object sufficiently | |
| 152 | 233 |
Install JNET component of SAPGUI | The short text describes the object sufficiently | |
| 153 | 234 |
No F4 help available since there is no linear reference pattern | The short text describes the object sufficiently | |
| 154 | 235 |
Network type could not be determined; enter type of network | Space: object requires documentation | |
| 155 | 236 |
No network attribute values have been recorded | The short text describes the object sufficiently | |
| 156 | 237 |
Conversion error occurred during calculation of dynamic segmentation | The short text describes the object sufficiently | |
| 157 | 238 |
Network attribute category &1 is not assigned to network &2 | The short text describes the object sufficiently | |
| 158 | 239 |
Specify exactly one attribute category when selecting by attribute values | The short text describes the object sufficiently | |
| 159 | 240 |
Network attribute category &1 does not exist | The short text describes the object sufficiently | |
| 160 | 241 |
Error during creation of selection criteria for attribute values | The short text describes the object sufficiently | |
| 161 | 242 |
Maximum of 36 network attributes to be displayed has been exceeded | The short text describes the object sufficiently | |
| 162 | 243 |
Graphic can only display values less than 100000, change display UOM | The short text describes the object sufficiently | |
| 163 | 244 |
Selection criteria for attribute values have been cleared | The short text describes the object sufficiently | |
| 164 | 245 |
No unit of measurement has been specified | The short text describes the object sufficiently | |
| 165 | 246 |
Unit of measurement has not been changed | The short text describes the object sufficiently | |
| 166 | 247 |
Enter unit of measurement | The short text describes the object sufficiently | |
| 167 | 248 |
Error during XML creation for graphic display | The short text describes the object sufficiently | |
| 168 | 249 |
Specify data element or data type for attribute property &1 | The short text describes the object sufficiently | |
| 169 | 250 |
All properties of network category &1 require a data element / type | Space: object requires documentation | |
| 170 | 251 |
Only the first 1000 markers are displayed | The short text describes the object sufficiently | |
| 171 | 252 |
No value has been specified for attribute property '&1' in row &2 | The short text describes the object sufficiently | |
| 172 | 253 |
Field '&1' in row &2 had wrong format and was cleared | The short text describes the object sufficiently | |
| 173 | 254 |
Attributes for network &1 saved successfully | The short text describes the object sufficiently | |
| 174 | 255 |
Recording attrib. changes requires a network type for network &1 | The short text describes the object sufficiently | |
| 175 | 256 |
No changes were made | The short text describes the object sufficiently | |
| 176 | 257 |
For network &1 no inactive attribute records exist | The short text describes the object sufficiently | |
| 177 | 258 |
No network attribute records match the specified filter values | The short text describes the object sufficiently | |
| 178 | 259 |
Only one default profile allowed | Space: object requires documentation | |
| 179 | 260 |
Navigation is not possible | Space: object requires documentation | |
| 180 | 261 |
No default profile selected | The short text describes the object sufficiently | |
| 181 | 262 |
Use only numbers and decimal separator '.' for allowed numeric values | The short text describes the object sufficiently | |
| 182 | 263 |
Value &1 exceeds the defined length of the property value | The short text describes the object sufficiently | |
| 183 | 264 |
Type &1 of data element &2 is not supported | The short text describes the object sufficiently | |
| 184 | 265 |
Use only numbers for allowed integer values | The short text describes the object sufficiently | |
| 185 | 266 |
Enter value for property &1 in format '&2' | The short text describes the object sufficiently | |
| 186 | 267 |
There are more than &1 markers, markers are not displayed | The short text describes the object sufficiently | |
| 187 | 290 |
Linear data exists for the object link; use transaction IN22 for editing | Space: object requires documentation | |
| 188 | 301 |
Neither IT_NETID nor IT_OBJ_LNK_ID was specified | Space: object requires documentation | |
| 189 | 302 |
Both IT_NETID and IT_OBJ_LNK_ID were specified | Space: object requires documentation | |
| 190 | 303 |
Specify technical object type for network (parameter IV_KANTYP) | The short text describes the object sufficiently | |
| 191 | 304 |
Caution: You are about to change defaulted linear data of the object link | Space: object requires documentation | |
| 192 | 305 |
Object link &1 is not assigned to network &2 | The short text describes the object sufficiently | |
| 193 | 306 |
This LRP type is not assigned to any linear reference patterns | Space: object requires documentation | |
| 194 | 307 |
No LRP Type exists which meets the entered values | The short text describes the object sufficiently | |
| 195 | 308 |
Deletion flag for network is set. Data cannot be changed. | The short text describes the object sufficiently | |
| 196 | 309 |
Deletion flag for network is set. Switch to edit mode is not possible. | The short text describes the object sufficiently | |
| 197 | 310 |
Linear data of object links have been defaulted from technical objects | Space: object requires documentation | |
| 198 | 311 |
Deletion flag for network &1 is set. Network cannot be assigned. | The short text describes the object sufficiently | |
| 199 | 312 |
Linear data of object link &1 &2 defaulted from technical object &3 | Space: object requires documentation | |
| 200 | 666 |
This program can only run if Business Function LOG_EAM_LINEAR_2 is active | The short text describes the object sufficiently | |
| 201 | 897 |
No defaulting of the linear data fields for measuring point & | The short text describes the object sufficiently | |
| 202 | 898 |
Internal error during defaulting processing | The short text describes the object sufficiently | |
| 203 | 899 |
No defaulting of the linear data fields for object & tab key & | The short text describes the object sufficiently |
History
| Last changed on/by | |
20130531 | SAP |
| SAP Release Created in | 605 |
