SAP ABAP Message Class CNV_NCE_BAS (Number conversion engine: messages)
Basic Data
Hierarchy
☛
DMIS (Software Component) DMIS 2011_1
⤷
CA-EUR (Application Component) European Monetary Union: Euro
⤷
CNV_NCE_BAS (Package) Number conversion engine: Core

⤷

⤷

Attributes
Message class | ![]() |
CNV_NCE_BAS |
Short Description | ![]() |
Number conversion engine: messages |
Changed On | ![]() |
20141030 |
Last Changed At | ![]() |
041432 |
Messages
# | Message | Message Short Text | Documentation status | Authorization check |
---|---|---|---|---|
1 | ![]() |
NCE project with identifier &1 does not exist | Space: object requires documentation | |
2 | ![]() |
Knowledge base for number range objects is empty | Space: object requires documentation | |
3 | ![]() |
Differences between table TNRO and KB regarding field &1; TNRO=&2, KB=&3 | Space: object requires documentation | |
4 | ![]() |
Object &1 is marked as relevant | Space: object requires documentation | |
5 | ![]() |
Object &1: knowledge base does not contain info. about customer objects | Space: object requires documentation | |
6 | ![]() |
Table name is empty | Space: object requires documentation | |
7 | ![]() |
Table &1: field name is empty | Space: object requires documentation | |
8 | ![]() |
Table &1: year field name is empty | Space: object requires documentation | |
9 | ![]() |
Domain &1 differs from domain &2 | Space: object requires documentation | |
10 | ![]() |
Field &1 does not exist in table &2 | Space: object requires documentation | |
11 | ![]() |
Field &1 cannot be used as a year field (incorrect length) | Space: object requires documentation | |
12 | ![]() |
Number range object &1 | Space: object requires documentation | |
13 | ![]() |
No header tables maintained | Space: object requires documentation | |
14 | ![]() |
No tables selected | Space: object requires documentation | |
15 | ![]() |
Select only one table | Space: object requires documentation | |
16 | ![]() |
No sufficient information for a simulation | Space: object requires documentation | |
17 | ![]() |
No mappings values exist for object &1 | Space: object requires documentation | |
18 | ![]() |
Mapping tables are inconsistent | Space: object requires documentation | |
19 | ![]() |
Number interval &1 (subobject &2) does not exist in NRIV | Space: object requires documentation | |
20 | ![]() |
Object does not exist in the knowledge base (excluded or not relevant) | Space: object requires documentation | |
21 | ![]() |
&1 Range &2 &3: target level is bigger than upper limit | Space: object requires documentation | |
22 | ![]() |
&1 Range &2 &3: warning limit is reached | Space: object requires documentation | |
23 | ![]() |
&1 Range &2 &3: pattern results in duplicate numbers | Space: object requires documentation | |
24 | ![]() |
Object name is empty | Space: object requires documentation | |
25 | ![]() |
Project identifier is empty | Space: object requires documentation | |
26 | ![]() |
Parameters are inconsistent | Space: object requires documentation | |
27 | ![]() |
Unable to generate temporary interval number for subobject &1, year &2 | Space: object requires documentation | |
28 | ![]() |
&1 &2 New temporary interval &3 (&4) | Space: object requires documentation | |
29 | ![]() |
&1 &2 Actual number level of interval &3 is &4 | Space: object requires documentation | |
30 | ![]() |
No free background processes available | Space: object requires documentation | |
31 | ![]() |
Failed to release jobs (no authorization) | Space: object requires documentation | |
32 | ![]() |
No relevant objects found | Space: object requires documentation | |
33 | ![]() |
Default rule is not set | Space: object requires documentation | |
34 | ![]() |
Class &1 does not exist | Space: object requires documentation | |
35 | ![]() |
Class &1 does not implement method IF_CNV_NCE_MAP~GET_SOBJ_MAP | Space: object requires documentation | |
36 | ![]() |
Number range state analysis has not been performed yet | Space: object requires documentation | |
37 | ![]() |
Subobject &1, Range &2: new interval with year &3 (subobject mapping) | Space: object requires documentation | |
38 | ![]() |
Class name is empty | Space: object requires documentation | |
39 | ![]() |
Subobject mapping has been changed since the last analysis run | Space: object requires documentation | |
40 | ![]() |
&1 Range &2 &3: no analysis data | Space: object requires documentation | |
41 | ![]() |
&1 Range &2: number intervals for years &3 and &4 overlap | Space: object requires documentation | |
42 | ![]() |
&1 Ranges &2 and &3 overlap | Space: object requires documentation | |
43 | ![]() |
&1 Range &2 &3: unable to define target interval | Space: object requires documentation | |
44 | ![]() |
&1 New interval &2 &3 &4 | Space: object requires documentation | |
45 | ![]() |
&1 &2 Single mapping for &3 results in a gap | Space: object requires documentation | |
46 | ![]() |
&1 &2 Single mapping for &3 conflicts with no. range interval mapping | Space: object requires documentation | |
47 | ![]() |
&1 &2 Target number for &3 already exists in &4 | Space: object requires documentation | |
48 | ![]() |
Object &1 &2: no mapping values found | Space: object requires documentation | |
49 | ![]() |
Object &1 &2 &3: no mapping values found | Space: object requires documentation | |
50 | ![]() |
Object &1 is year independent | Space: object requires documentation | |
51 | ![]() |
Object &1, &2 Range &3 &4: no mappings found | Space: object requires documentation | |
52 | ![]() |
Knowledge base is complete; manual maintenance is not required | Space: object requires documentation | |
53 | ![]() |
Not enough information to determine subobject relations | Space: object requires documentation | |
54 | ![]() |
&1 duplicate numbers were found | Space: object requires documentation | |
55 | ![]() |
&1 &2 Number &3: upper limit is reached | Space: object requires documentation | |
56 | ![]() |
Number range object &1 is excluded from conversion | Space: object requires documentation | |
57 | ![]() |
&1 Range &2 &3: number range interval is alphanumeric | Space: object requires documentation | |
58 | ![]() |
NRIV state is not defined | Space: object requires documentation | |
59 | ![]() |
NRIV backup is created: &1 entries are saved | Space: object requires documentation | |
60 | ![]() |
Downtime analysis results are used to determine new number levels | Space: object requires documentation | |
61 | ![]() |
NRIV state before conversion is used to determine new number levels | Space: object requires documentation | |
62 | ![]() |
Number levels of number range intervals have been updated | Space: object requires documentation | |
63 | ![]() |
Class &1 does not implement required method &2 | Space: object requires documentation | |
64 | ![]() |
&1 Range &2, Year &3: unable to extract interval for year &4 | Space: object requires documentation | |
65 | ![]() |
Table &1: subobject field name is empty | Space: object requires documentation | |
66 | ![]() |
Subobject data element &1 differs from a data element of field &2 | Space: object requires documentation | |
67 | ![]() |
No errors or warnings | Space: object requires documentation | |
68 | ![]() |
Number range buffers are reset | Space: object requires documentation | |
69 | ![]() |
No tracking data found | Space: object requires documentation | |
70 | ![]() |
Table NRIV was changed: &1 range &2 &3 was deleted | Space: object requires documentation | |
71 | ![]() |
Table NRIV was changed: &1 range &2 &3 was created | Space: object requires documentation | |
72 | ![]() |
All number range intervals for object &1 are excluded from the conversion | Space: object requires documentation | |
73 | ![]() |
Invalid pattern &1 for interval &2 &3 &4 | Space: object requires documentation | |
74 | ![]() |
&1: actual number level was changed from &2 to &3 | Space: object requires documentation | |
75 | ![]() |
New relevant SAP number range object &1 found | Space: object requires documentation | |
76 | ![]() |
Customer number range object &1 found | Space: object requires documentation | |
77 | ![]() |
&1 Range &2 &3: mapping values result in duplicate numbers | Space: object requires documentation | |
78 | ![]() |
Wrong Icon | Space: object requires documentation | |
79 | ![]() |
Check object &1 | Space: object requires documentation | |
80 | ![]() |
Serious changes detected for Object &1, execute initialization step again | Space: object requires documentation | |
81 | ![]() |
One to One Mapping not changeable | Space: object requires documentation | |
82 | ![]() |
Object Check was executed successful. | Space: object requires documentation | |
83 | ![]() |
Selected Interval/s where checked successful. | Space: object requires documentation | |
84 | ![]() |
Selected One to One mapping/s where checked successful. | Space: object requires documentation | |
85 | ![]() |
Check of Object &1 was finished | Space: object requires documentation | |
86 | ![]() |
Space: object requires documentation | ||
87 | ![]() |
** Messages for SAPLT V2 SP1 (100-199) ** | Space: object requires documentation | |
88 | ![]() |
No entries for object &1 exist in table NRIV | Space: object requires documentation | |
89 | ![]() |
NR interval &1: unable to define interval limits due to ambiguity | Space: object requires documentation | |
90 | ![]() |
NR interval &1 overlaps with another NR interval | Space: object requires documentation | |
91 | ![]() |
NR interval &1: interval for year &2 extracted | Space: object requires documentation | |
92 | ![]() |
Object &1: database analysis results not found | Space: object requires documentation | |
93 | ![]() |
Number range number is empty | Space: object requires documentation | |
94 | ![]() |
No detailed information available | Space: object requires documentation | |
95 | ![]() |
NR mapping values for &1 and &2 result in duplicates (number &3) | Space: object requires documentation | |
96 | ![]() |
1:1 mapping values for &1 and &2 result in duplicates | Space: object requires documentation | |
97 | ![]() |
1:1 and NR mapping values for &1 and &2 result in duplicates (number &3) | Space: object requires documentation | |
98 | ![]() |
NR mapping values for &1 and &2 could result in duplicates | Space: object requires documentation | |
99 | ![]() |
1:1 and NR mapping values for &1 and &2 could produce duplicates (no. &3) | Space: object requires documentation | |
100 | ![]() |
NR mapping values for &1 conflicts with existing numbers (number &3) | Space: object requires documentation | |
101 | ![]() |
1:1 mapping values for &1 conflicts with an existing number (number &3) | Space: object requires documentation | |
102 | ![]() |
NR mapping values for &1 could conflict with existing numbers | Space: object requires documentation | |
103 | ![]() |
1:1 mapping values for &1 could conflict with an existing number (no. &3) | Space: object requires documentation | |
104 | ![]() |
Subobject &1 | Space: object requires documentation | |
105 | ![]() |
Current number level is retrieved from table NRIV | Space: object requires documentation | |
106 | ![]() |
No NR intervals for relevant subobjects exist in system | Space: object requires documentation | |
107 | ![]() |
Initialization of number range mapping values started in background | Space: object requires documentation | |
108 | ![]() |
&1 &2 &3 &4 | Space: object requires documentation | |
109 | ![]() |
New mapping values for subobject &1 | Space: object requires documentation | |
110 | ![]() |
Changes detected in table NRIV, initialization of mappings is required | Space: object requires documentation | |
111 | ![]() |
Cannot retrieve subobject mapping values | Space: object requires documentation | |
112 | ![]() |
Object &1 does not exist in the system | Space: object requires documentation | |
113 | ![]() |
Subobject value is missing | Space: object requires documentation | |
114 | ![]() |
Fiscal year is missing | Space: object requires documentation | |
115 | ![]() |
Number &1 does not belong to any interval of object &2 | Space: object requires documentation | |
116 | ![]() |
No entries for object &1 exist in internal interval table | Space: object requires documentation | |
117 | ![]() |
NR interval &1: conversion rule is not defined | Space: object requires documentation | |
118 | ![]() |
NR interval &1: invalid rule (subobject is empty) | Space: object requires documentation | |
119 | ![]() |
NR interval &1: target interval number is empty | Space: object requires documentation | |
120 | ![]() |
NR interval &1: target "to year" field is empty | Space: object requires documentation | |
121 | ![]() |
NR interval &1: no one-to-one mapping values found | Space: object requires documentation | |
122 | ![]() |
NR interval &1: no offset specified | Space: object requires documentation | |
123 | ![]() |
NR interval &1: offset &2 is not valid | Space: object requires documentation | |
124 | ![]() |
NR interval &1: offset &2 is invalid (out of range) | Space: object requires documentation | |
125 | ![]() |
NR interval &1: function module name is not specified | Space: object requires documentation | |
126 | ![]() |
NR interval &1: function module &2 is not found | Space: object requires documentation | |
127 | ![]() |
NR interval &1: no pattern specified | Space: object requires documentation | |
128 | ![]() |
NR interval &1: alphanumeric pattern '&2' is not allowed | Space: object requires documentation | |
129 | ![]() |
NR interval &1: pattern '&2' is not valid | Space: object requires documentation | |
130 | ![]() |
NR interval &1: pattern '&2' has an incorrect length | Space: object requires documentation | |
131 | ![]() |
NR interval &1: offset mode is not possible | Space: object requires documentation | |
132 | ![]() |
NR interval &1: shifting mode is not possible | Space: object requires documentation | |
133 | ![]() |
NR interval &1: target interval limits are not specified | Space: object requires documentation | |
134 | ![]() |
NR interval &1: pattern '&2' is not valid (out of range) | Space: object requires documentation | |
135 | ![]() |
NR interval &1: source and target NR intervals are not identical | Space: object requires documentation | |
136 | ![]() |
NR interval &1: source and target NR interval limits must be equivalent | Space: object requires documentation | |
137 | ![]() |
NR interval &1: no shifting order maintained | Space: object requires documentation | |
138 | ![]() |
NR interval &1: order &2 is not valid | Space: object requires documentation | |
139 | ![]() |
NR interval &1: non-shifting conv. rule exists for the target interval | Space: object requires documentation | |
140 | ![]() |
NR interval &1: shifting order &2 is already in use | Space: object requires documentation | |
141 | ![]() |
NR interval &1: order in a shifting group is incorrect | Space: object requires documentation | |
142 | ![]() |
NR interval &1: target subobject is empty | Space: object requires documentation | |
143 | ![]() |
NR interval &1: interval cannot be excluded (one-to-one mappings exist) | Space: object requires documentation | |
144 | ![]() |
NR interval &1: conflict with a NR number mapping | Space: object requires documentation | |
145 | ![]() |
NR interval &1: target NR number differs from the source NR number | Space: object requires documentation | |
146 | ![]() |
NR interval &1: function module &2 differs from a predefined pattern | Space: object requires documentation | |
147 | ![]() |
Predefined pattern for conversion function module not found | Space: object requires documentation | |
148 | ![]() |
New G/L is not active | Space: object requires documentation | |
149 | ![]() |
NR interval &1: warning limit is reached | Space: object requires documentation | |
150 | ![]() |
Number &1 does not exist | Space: object requires documentation | |
151 | ![]() |
Number &1: target number is already used in the other 1:1 mapping | Space: object requires documentation | |
152 | ![]() |
Number &1: mapping is not unique | Space: object requires documentation | |
153 | ![]() |
Number &1: one-to-one and NR mappings have different target intervals | Space: object requires documentation | |
154 | ![]() |
1:1 mapping is empty | Space: object requires documentation | |
155 | ![]() |
Number &1: fiscal year is empty | Space: object requires documentation | |
156 | ![]() |
Number &1: target number is empty | Space: object requires documentation | |
157 | ![]() |
NR mappings have been initialized | Space: object requires documentation | |
158 | ![]() |
NR interval &1: target interval is too short (out of range) | Space: object requires documentation | |
159 | ![]() |
Target NR intervals &1 and &2 overlap | Space: object requires documentation | |
160 | ![]() |
No customizing settings for object &1 exist | Space: object requires documentation | |
161 | ![]() |
Changes in subobject mappings are detected | Space: object requires documentation | |
162 | ![]() |
Cannot reset job status (job &1 is running) | Space: object requires documentation | |
163 | ![]() |
No initialization of mapping values is required | Space: object requires documentation | |
164 | ![]() |
No subobject mapping values exist | Space: object requires documentation | |
165 | ![]() |
NR interval &1: initialization of mapping values is required | Space: object requires documentation | |
166 | ![]() |
New numbers without mapping values are found (number &1) | Space: object requires documentation | |
167 | ![]() |
Simulation ended with errors; use troubleshooting activity for support | Space: object requires documentation | |
168 | ![]() |
NR interval &1: conversion rule produces numbers with a wrong length (&1) | Space: object requires documentation | |
169 | ![]() |
Number Range Object &1 | The short text describes the object sufficiently | |
170 | ![]() |
Check not possible; you must first save your mapping values | Space: object requires documentation | |
171 | ![]() |
Number Range Objects | The short text describes the object sufficiently | |
172 | ![]() |
Number &1: Target number lies outside of interval | Space: object requires documentation | |
173 | ![]() |
** End of reserved area (100-199)** | Space: object requires documentation | |
174 | ![]() |
Conversion tracking is switched OFF for object &1 | Space: object requires documentation | |
175 | ![]() |
Conversion tracking is switched ON for object &1 | Space: object requires documentation | |
176 | ![]() |
** Messages for SAPLT V2 SP2 (203-299) ** | Space: object requires documentation | |
177 | ![]() |
Number &1: target number is changed from &2 to &3 | Space: object requires documentation | |
178 | ![]() |
Temporary interval &1: target numbers fall into NR interval &2 | Space: object requires documentation | |
179 | ![]() |
Could not connect to the source system | Space: object requires documentation | |
180 | ![]() |
Could not connect to the target system | Space: object requires documentation | |
181 | ![]() |
No information about participating systems provided | Space: object requires documentation | |
182 | ![]() |
No information about participating systems found | Space: object requires documentation | |
183 | ![]() |
Execution is permitted only in a control system | Space: object requires documentation | |
184 | ![]() |
Source system | Space: object requires documentation | |
185 | ![]() |
Target system | Space: object requires documentation | |
186 | ![]() |
Execution in a display mode (not a control system) | Space: object requires documentation | |
187 | ![]() |
Adjustment of number range intervals is not required | Space: object requires documentation | |
188 | ![]() |
Number range intervals have been copied and adjusted | Space: object requires documentation | |
189 | ![]() |
Object &2: job &1 is still running | Space: object requires documentation | |
190 | ![]() |
Unable to read current application log | Space: object requires documentation | |
191 | ![]() |
Job is aborted | Space: object requires documentation | |
192 | ![]() |
Failed to create an object status job in the control system | Space: object requires documentation | |
193 | ![]() |
Data synchronization failed | Space: object requires documentation | |
194 | ![]() |
Analysis | Space: object requires documentation | |
195 | ![]() |
Simulation | Space: object requires documentation | |
196 | ![]() |
Object &1: no information about future NR interval limits found | Space: object requires documentation | |
197 | ![]() |
NR interval &1: wrong limits | Space: object requires documentation | |
198 | ![]() |
NR interval &1: wrong number level | Space: object requires documentation | |
199 | ![]() |
NR intervals &1 and &2 overlap | Space: object requires documentation | |
200 | ![]() |
NR interval &1: internal alphanumeric intervals not allowed | The short text describes the object sufficiently | |
201 | ![]() |
NR interval &1: external interval with a non-empty number level | The short text describes the object sufficiently | |
202 | ![]() |
&1 entries read | The short text describes the object sufficiently | |
203 | ![]() |
&1 number intervals built | The short text describes the object sufficiently | |
204 | ![]() |
No corresponding numbers found in database | The short text describes the object sufficiently | |
205 | ![]() |
Number range &1 | The short text describes the object sufficiently | |
206 | ![]() |
NR interval &1: pattern results in duplicates | Space: object requires documentation | |
207 | ![]() |
Object &1 does not exist in the knowledge base for number range objects | The short text describes the object sufficiently | |
208 | ![]() |
NR interval &1: limits differ (&2 and &3) | The short text describes the object sufficiently | |
209 | ![]() |
NR interval &1: target interval &2 does not exist | The short text describes the object sufficiently | |
210 | ![]() |
No mapping values found | The short text describes the object sufficiently | |
211 | ![]() |
No mapping variants found | The short text describes the object sufficiently | |
212 | ![]() |
Inconsistency in table NRIV: NR intervals &1 and &2 overlap | The short text describes the object sufficiently | |
213 | ![]() |
NR interval &1: an incomplete entry exists | The short text describes the object sufficiently | |
214 | ![]() |
NR interval &1: duplicate entries exist | The short text describes the object sufficiently | |
215 | ![]() |
Cannot save; data inconsistencies exist | The short text describes the object sufficiently | |
216 | ![]() |
Current version is identical to the selected one | The short text describes the object sufficiently | |
217 | ![]() |
New NR interval &1 created in the target subobject | Space: object requires documentation | |
218 | ![]() |
No NR intervals for relevant objects and/or subobject values found | The short text describes the object sufficiently | |
219 | ![]() |
No information about new intervals exists, maintenance is not possible | The short text describes the object sufficiently | |
220 | ![]() |
Mapping values are not valid; conversion simulation is not possible | Space: object requires documentation | |
221 | ![]() |
Analyzing database table &1 | The short text describes the object sufficiently | |
222 | ![]() |
Number range interval &1; no changes of target numbers allowed | Space: object requires documentation | |
223 | ![]() |
Number range interval levels will not be adjusted | The short text describes the object sufficiently | |
224 | ![]() |
&1 object entries were deleted from table NRIV_LOKAL | The short text describes the object sufficiently | |
225 | ![]() |
No relevant mapping values found in file &1 | Space: object requires documentation | |
226 | ![]() |
Row &1, column &2; incorrect data format | The short text describes the object sufficiently | |
227 | ![]() |
Row &1: conversion rule is ambiguous | Space: object requires documentation | |
228 | ![]() |
Row &1: conversion rule is not defined | The short text describes the object sufficiently | |
229 | ![]() |
Row &1: conversion rule &2 is not valid | Space: object requires documentation | |
230 | ![]() |
Row &1: number range object name is empty | The short text describes the object sufficiently | |
231 | ![]() |
Row &1: subobject name is empty | The short text describes the object sufficiently | |
232 | ![]() |
Row &1: number range number is empty | The short text describes the object sufficiently | |
233 | ![]() |
Row &1: "To Year" field is empty | The short text describes the object sufficiently | |
234 | ![]() |
Row &1: number range object &2 is not relevant for the current project | The short text describes the object sufficiently | |
235 | ![]() |
Row &1: subobject &2 is not relevant for the current project | The short text describes the object sufficiently | |
236 | ![]() |
Row &1: source mapping value is empty | The short text describes the object sufficiently | |
237 | ![]() |
Row &1: fiscal year of a source mapping value is empty | The short text describes the object sufficiently | |
238 | ![]() |
Row &1: target mapping value is empty | The short text describes the object sufficiently | |
239 | ![]() |
Row &1: number interval limits are not complete | The short text describes the object sufficiently | |
240 | ![]() |
Row &1: invalid number interval limits (To No. is less than From No.) | The short text describes the object sufficiently | |
241 | ![]() |
Row &1: unable to find corresponding number range intervals | The short text describes the object sufficiently | |
242 | ![]() |
Row &1: offset &2 is invalid for a number interval &3-&4 | The short text describes the object sufficiently | |
243 | ![]() |
NR interval &1: ambiguous mapping values could not be loaded | The short text describes the object sufficiently | |
244 | ![]() |
NR interval &1: number limits had to be changed to &2 | The short text describes the object sufficiently | |
245 | ![]() |
Spreadsheet &1 | The short text describes the object sufficiently | |
246 | ![]() |
Spreadsheet &1: unable to read data | The short text describes the object sufficiently | |
247 | ![]() |
Spreadsheet &1: unknown data structure | The short text describes the object sufficiently | |
248 | ![]() |
NR interval &1: ambiguous target interval limits could not be loaded | The short text describes the object sufficiently | |
249 | ![]() |
Mapping values for object &1 exported successfully | The short text describes the object sufficiently | |
250 | ![]() |
MMapping values for object &1 imported successfully | The short text describes the object sufficiently | |
251 | ![]() |
Insert a valid table name | Space: object requires documentation | |
252 | ![]() |
Insert a valid field name | Space: object requires documentation | |
253 | ![]() |
** Error messages for function group CNV_NCEMAP (reserve up to no. 499 ** | Space: object requires documentation | |
254 | ![]() |
Error & occurred while trying to free memory | Space: object requires documentation | |
255 | ![]() |
Display mode activated | Space: object requires documentation | |
256 | ![]() |
Action cancelled | Space: object requires documentation | |
257 | ![]() |
All number range objects selected | Space: object requires documentation | |
258 | ![]() |
Number range object &1 selected | Space: object requires documentation | |
259 | ![]() |
Data successfully saved | Space: object requires documentation | |
260 | ![]() |
No relevant number range objects found | Space: object requires documentation | |
261 | ![]() |
Error occurred while saving subobject mapping | Space: object requires documentation | |
262 | ![]() |
Error occurred while saving 1:1 document mapping | Space: object requires documentation | |
263 | ![]() |
No offset specified | Space: object requires documentation | |
264 | ![]() |
No pattern specified | Space: object requires documentation | |
265 | ![]() |
No order specified for shifting mode | Space: object requires documentation | |
266 | ![]() |
No function module specified | Space: object requires documentation | |
267 | ![]() |
Conversion rule & is not a valid value | Space: object requires documentation | |
268 | ![]() |
No log entries found | Space: object requires documentation | |
269 | ![]() |
Error occurred while saving mapping values | Space: object requires documentation | |
270 | ![]() |
No mapping data found for this conversion package | Space: object requires documentation | |
271 | ![]() |
No data found in table CNV_NCE_NRIV_WRK | Space: object requires documentation | |
272 | ![]() |
Information is complete | Space: object requires documentation | |
273 | ![]() |
Source number range interval could not be determined | Space: object requires documentation | |
274 | ![]() |
Target number range interval could not be determined | Space: object requires documentation | |
275 | ![]() |
Source and target number range intervals could not be determined | Space: object requires documentation | |
276 | ![]() |
Fiscal year is required | Space: object requires documentation | |
277 | ![]() |
Information is not complete | Space: object requires documentation | |
278 | ![]() |
Number range interval &1/&2/&3/&4 is excluded from conversion | Space: object requires documentation | |
279 | ![]() |
Number range must have order = 1 | Space: object requires documentation | |
280 | ![]() |
Duplicate mapping values for number range intervals found | Space: object requires documentation | |
281 | ![]() |
Duplicate one-to-one mapping values found | Space: object requires documentation | |
282 | ![]() |
This number range interval must have the highest shifting order | Space: object requires documentation | |
283 | ![]() |
Cannot skip simulation for overlapping no. range intervals | Space: object requires documentation | |
284 | ![]() |
Non-shifting mapping exists for the target interval | Space: object requires documentation | |
285 | ![]() |
Project identifier for package &1 could not be found | Space: object requires documentation | |
286 | ![]() |
Conversion rule is initial for object &1 | Space: object requires documentation | |
287 | ![]() |
Simulation for number range interval &1 will run during system lock | Space: object requires documentation | |
288 | ![]() |
Number range interval &1 (object &2) excluded from conversion | Space: object requires documentation | |
289 | ![]() |
Number range intervals for object &1 were changed | Space: object requires documentation | |
290 | ![]() |
Number range object &1 is not analyzed yet | Space: object requires documentation | |
291 | ![]() |
Activities must be repeated for number range object &1 (s. long text) | Space: object requires documentation | |
292 | ![]() |
Creating initial mapping values for number range object &1 | Space: object requires documentation | |
293 | ![]() |
Pattern '&2' is too long | Space: object requires documentation | |
294 | ![]() |
Error while calling user interface | Space: object requires documentation | |
295 | ![]() |
Number range object &1 does not exist | Space: object requires documentation | |
296 | ![]() |
Function module &1 does not exist | Space: object requires documentation | |
297 | ![]() |
Offset &2 is not a valid value | Space: object requires documentation | |
298 | ![]() |
Pattern &2 is not a valid value | Space: object requires documentation | |
299 | ![]() |
Number range number required | Space: object requires documentation | |
300 | ![]() |
Subobject and number range number required | Space: object requires documentation | |
301 | ![]() |
Subobject required | Space: object requires documentation | |
302 | ![]() |
Fiscal year could not be validated (missing information) | Space: object requires documentation | |
303 | ![]() |
Source number &1 is not a valid value | Space: object requires documentation | |
304 | ![]() |
One-to-one mappings for object will not be processed | Space: object requires documentation | |
305 | ![]() |
No conversion rule maintained for object | Space: object requires documentation | |
306 | ![]() |
Conflict with another unique target number range interval detected | Space: object requires documentation | |
307 | ![]() |
Target number range is not alphanumeric | Space: object requires documentation | |
308 | ![]() |
Subobject &1 is invalid | Space: object requires documentation | |
309 | ![]() |
Shifting order is already used for the same target interval | Space: object requires documentation | |
310 | ![]() |
Target subobject is invalid | Space: object requires documentation | |
311 | ![]() |
No data found in table CNV_NCE_NRIV_TMP | Space: object requires documentation | |
312 | ![]() |
No source system information found | Space: object requires documentation | |
313 | ![]() |
No target system information found | Space: object requires documentation | |
314 | ![]() |
Rule 'Subobject Change' is not applicable for selected interval | Space: object requires documentation | |
315 | ![]() |
Invalid document number for fiscal year: &1 | Space: object requires documentation | |
316 | ![]() |
NO Object selected. Select relevant object first. | Space: object requires documentation | |
317 | ![]() |
Valid mapping values saved for &1 | Space: object requires documentation | |
318 | ![]() |
Invalid mapping saved for &1 | Space: object requires documentation | |
319 | ![]() |
Unexpected error; report an incident using component CA-LT-CNV | Space: object requires documentation | |
320 | ![]() |
Mapping values result in &1 numbers moving from range &2 to range &3 | Space: object requires documentation | |
321 | ![]() |
Mapping values result in &1 numbers moving outside of range &2 | Space: object requires documentation | |
322 | ![]() |
** End of reserved area for function group CNV_NCE_MAP ** | Space: object requires documentation | |
323 | ![]() |
Duplicate values in number range interval detected | Space: object requires documentation | |
324 | ![]() |
NRIV interval missing; subobject &1, year &2, from number &3,to number &4 | The short text describes the object sufficiently |
History
Last changed on/by | ![]() |
20141030 | SAP |
SAP Release Created in | 2010_1_620 |